Used Hurlimann H-488T for sale (24,079)

Condition: used, Offer in progress! Dsb Hswh Ug Uon Tn Rjut

Condition: used, Year of construction: 2022, operating hours: 80 h, power: 1 kW (1.36 HP), carrying capacity of cage: 227 kg, construction height: 1,910 mm, wheelbase: 1,850 mm, ground clearance: 90 mm, total length: 2,260 mm, front tire size: 15x5, rear tire size: 15x5, drive type: Elektro, construction width: 810 mm, net weight: 2,182 kg, working height: 9,920 mm, front tire type: Exmile, rear tire type: Exmile, - Arbeitshöhe: 9,92 m - Plattformhöhe max.: 7,92 m - Plattformhöhe eingefahren: 1,16 m - Plattformlänge – außen 2,26 m - Plattformlänge - ausgeschoben 3,18 m - Plattformausschub 0,91 m - Plattformbreite – außen 0,81 m - Geländerhöhe: klappbares Geländer 1,10 m - Höhe der Fußleiste 0,15 m - Höhe – eingefahren: klappbares Geländer 2,26 m - Länge – eingefahren 2,44 m - Länge - mit ausgefahrenem Plattformausschub 3,33 m - Breite 0,81 m - Radstand 1,85 m - Bodenfreiheit (Mitte) 0,09 m - Bodenfreiheit (Lochfahrschutz ausgefahren) 0,02 m Dujb Hsvkh Npsn Tn Rst - Max. Personen auf der Plattform (innen/außen) 2 (nur innen) - Tragfähigkeit 227 kg - Fahrgeschwindigkeit – eingefahren 3,5 km/h - Fahrgeschwindigkeit – ausgefahren 0,8 km/h - Steigfähigkeit – eingefahren 25 % - Wenderadius – innen Null - Wenderadius – außen 2,13 m - Hub-/Senkzeit 30 / 40 sek. - Steuerung proportional - Antrieb Zweirad-Vorderradantrieb - Mehrfachscheibenbremsen Zweirad-Hinterachse - Antriebsart 24V (4 x 6V 225-Ah-Batterien) - Tankinhalt Hydrauliksystem 17 Liter - Geräusch-/Schalldruckpegel (Boden)

Condition: good (used), Year of construction: 1972, total power requirement 50 kW weight of the machine ca. 3,6 t magnetic table diameter 500 mm max. distance between table and spindle-nose 350 mm table speeds 20 > 80 m/min Dujb Hn Tsv Svb Non Rjt Technical information: - Length L -- R: 2000 mm - Depth V -- H: 2250 mm - Height: 2400 mm - Weight: 3.6 tonnes Additional information: - Type: SWR 50 T - Magnetic table, diameter: 500 mm - Max. Distance between table and spindle: 350 mm - Table speed: 20 > 80 rpm - Sanding speed: 1400/2800 rpm

Condition: excellent (used), Thread plug gauges different sizes M 80 x6 6 H. 476,00 Euro M 80 x 6 7 H. 476,00 Euro M 64 6 H Left 340,00 Euro M 62 6 H Good& scrap 320,00 Euro M 55. x 3 6 H 240,00 Euro M 55 x 1.5 6 H 240.00 Euro Dusbsipxyns Hn Tn Ret M 48 x 2 6 H 240,00 Euro are also sold individually

Condition: good (used), Year of construction: 2018, Strapping machine Manufacturer: Transpak Type: TP 601D1 Dusb Hn Tnsvxhd Ae Rst Year of manufacture: 2018 Cardboard up to 850 x 600 mm (W x H) Strap width: 10–13 mm ä080525

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 0024, Output: max. / min mechanical: 9000 copies / h // 2000 copies / h Formats: trimmed max. / min .: 30.5x34.9 cm // 8.9x14 cm Untrimmed max. / min: 31.1 x 35.5 cm // 9.2x14.6 cm Product thickness max. 1.0 cm pressed Consists of: Deb Hn Tnewid Tge Rout 6 stations 2 normal Hohner stitching heads and 4 ring eyelets stitching heads Equipment / Additional information: Machine books available Power supply: 50/60 Hz // 3x380 V (420) // 3x220V (200) Cover feeder is defective

Condition: used, Year of construction: 2004, Dear Sir or Madam, We are offering a used "BERG UND SCHMID" aluminum cold circular saw in good condition. Model: "Multi Cut 500HA PENTA" Dujb Hn Tnewhmy Ho Ret Digital miter angle display Infinitely adjustable saw feed Two pneumatic vertical vices Ball-bearing rotary table for miter and rip cuts Mist spray system Year of manufacture: 2004 Serial number: 091 Technical specifications: HM saw blade Ø 500 x 4.2/3.6 x 30 mm Cutting range [mm] 90° 45° left 45° right Round 160 140 140 Square 140 120 120 Rectangle 100x200 100x150 100x150 Speed: 2800 rpm Infinitely adjustable feed speed External dimensions W x D x H: 85 x 105 x 145 cm Weight: 350 kg Accessories: Discharge length stop with roller conveyor ST 260 roller width 260 mm, made of plastic, 4.0 m

Condition: used, Year of construction: 2007, operating hours: 4,836 h, load capacity: 4,990 kg, lifting height: 6,450 mm, free lift: 2,110 mm, mast type: triplex, power: 15 kW (20.39 HP), ground clearance: 110 mm, front tire type: EMRALD, front tire size: 28x12,5-15, rear tire type: EMRALD, rear tire size: 21x8-9, total length: 5,045 mm, wheelbase: 2,050 mm, drive type: Elektro, construction width: 1,430 mm, net weight: 5,482 kg, - Bedienung Sitz - Tragfähigkeit 5,0to - Lastabstand 535 mm - Achslast vorn mit Last 11547 kg - Achslast hinten mit Last 1154 kg - Achslast vorn ohne Last 3845 kg - Achslast hinten ohne Last 3866 kg - Bereifung SE - Räder, Anzahl vorn (x = angetrieben) 2x - Räder, Anzahl hinten (x = angetrieben) 2 - Spur vorn mm 1104 - Spur hinten mm 920 - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 6 - Kupplungshöhe mm 546/421 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4284 - Arbeitsgangbreite bei Palette 800 x 1200 längs - Wenderadius 2549 mm - Kleinster Drehpunkt 638 mm - Fahrgeschwindigkeit mit Last km/h 18 - Fahrgeschwindigkeit ohne Last km/h 19 - Hubgeschwindigkeit mit Last m/s 0,31 - Hubgeschwindigkeit ohne Last m/s 0,44 - Senkgeschwindigkeit mit Last m/s 0,55 - Senkgeschwindigkeit ohne Last m/s 0,46 - Zugkraft mit Last N 3600 - Zugkraft ohne Last N 4400 - Max. Zugkraft mit Last N 15670 - Max. Zugkraft ohne Last N 16090 - Beschleunigungszeit mit Last s 5,4 - Beschleunigungszeit ohne Last s 4,7 - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Batteriespannung V 80 - Energieverbrauch 60 VDI-Arbeitsspiele/Stunde kWh/h 12,1 Dusb Hevdxrzjn Tn Rjt - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30 - Schallpegel, Fahrerohr dB (A)

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm Duebov Ehawe Hn Tn Rst travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, GF AgieCharmilles FORM 3000 Year of manufacture 2008 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) Djbjwh Smrs Hn Tn Rjut ISPG generator with 60 amps Best achievable surface finish Ra 0.10 µm AGIEVISION 5 user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Includes CAPA Electrode changer - 60 electrode positions - 4 pallet positions Net weight of the system: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: good (used), Plastic crates, reusable containers Transport boxes, storage containers, picking boxes Blue with interlocking lid Dimensions: approx. L 600 x W 400 x H 353 mm Dueb Hn Tjpvi Ufen Ret ä080525 Approx. 1,000 units available!

Condition: excellent (used), Year of construction: 1992, machine/vehicle number: 45553I, Output: max. / min mechanical: 9000 copies / h // 2000 copies / h Formats: trimmed max. / min .: 30.5x34.9 cm // 8.9x14 cm Untrimmed max. / min: 31.1 x 35.5 cm // 9.2x14.6 Product thickness max. 1.0 cm pressed Consists of: Feeder: 3x double vertical feeder (DVA 100) total 6 Stations // Gripper opening for folded sheets with pre-and post-fold (min.0.5 cm) vacuum opening without overfold / combined gripper. Stitching station: 2xHohner Universal 52/8 Trimmer Scale display Djb Hnowid I Rj Tn Rout Pressure vacuum generator Equipment / Additional information: -Compl. Replacement knife set -middle cut -1x replacement stitching head -Replacement chains -Finger + tongues - Conveyor belts changed 4 years ago Power supply: 50/60 Hz // 3x380 V (420) // 3x220V (200)

Condition: as good as new (ex-display), Functionality: fully functional, net weight: 380 kg, Dear Sir or Madam, We are offering you a "HOLZKRAFT" vertical wood band saw. Dob Hn Tnjwhmtts Reut Model: HBS 633S - Quick-action saw blade tensioning system - Precision saw blade roller guide - Fast and precise cutting height adjustment via handwheel and rack and pinion with millimeter scale - Safety switch for automatic shutdown when the door is opened - Large cast parallel stop - Angle stop - Table tilt via rack and pinion and handwheel - Saw blades Technical specifications: Cutting height 90° max. 400 mm Maximum cutting width with stop: 570 mm Maximum cutting width without stop: 610 mm Cutting speed 1,630 m/min Saw blade length 4,600 mm Table dimensions: Table length 830 mm Table width 600 mm Table height 830 mm Table tilt 0 – 45° Machine dimensions L x W x H 119 x 82 x 206 cm Machine weight 380 kg

Condition: new, Year of construction: 2023, operating hours: 1 h, load capacity: 3,500 kg, lifting height: 6,120 mm, free lift: 2,100 mm, mast type: triplex, power: 17 kW (23.11 HP), fork carriage width: 1,150 mm, fork length: 1,200 mm, ground clearance: 80 mm, front tire type: Trelleborg, front tire size: 315/45-12, rear tire type: Trelleborg, rear tire size: 18x7-8, total length: 3,830 mm, wheelbase: 1,800 mm, drive type: Elektro, construction width: 1,320 mm, net weight: 4,123 kg, - Bedienung Sitzgerät - Tragfähigkeit/Last 3500kg - Lastschwerpunkt 500 mm - Lastabstand 468 mm - Achslast mit Last vorn/hinten kg 8042/958 - Achslast ohne Last vorn/hinten kg 2662/2838 - Spurweite vorn/hinten mm 1002/900 - Neigung Hubgerüst/Gabelträger vor/zurück ° 7/7 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3941 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4141 - Wenderadius 2273 mm - Kleinster Drehpunktabstand 649 mm - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) mit Last km/h 18/18/20 Deb Hn Tjvfgrlon Rout - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) ohne Last km/h 18/18/21 - Hubgeschwindigkeit (Plus*//Standard Performance) mit Last m/s 0,53//0,44 - Hubgeschwindigkeit (Plus*//Standard Performance) ohne Last m/s 0,57/0,51 - Senkgeschwindigkeit mit Last m/s 0,50 - Senkgeschwindigkeit ohne Last m/s 0,43 - Zugkraft (Plus*//Standard Performance) mit Last N 10300/7590 - Zugkraft (Plus*//Standard Performance) 4 ohne Last N 10650/8015 - Max. Zugkraft (Plus*//Standard Performance) 4 mit Last N 20900/16920 - Max. Zugkraft (Plus*//Standard Performance) 4 ohne Last N 20290/17170 - Steigfähigkeit (Plus*//Standard Performance) 4 mit Last % 17,8/12,9 - Steigfähigkeit (Plus*//Standard Performance) 4 ohne Last % 28,2/21,9 - Max. Steigfähigkeit (Plus*//Standard Performance) 4 mit Last % 24,2/20,6 - Max. Steigfähigkeit (Plus*//Standard Performance) 4 ohne Last % 2482/28,2 - Beschleunigungszeit 15 m (Plus*//Standard Performance) mit Last s 5,7/6,3 - Beschleunigungszeit 15 m (Plus*//Standard Performance) ohne Last s 5,0//5,4 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Umschlagleistung (Plus*//Standard Performance) t/h 258/245 - Energieverbrauch bei Umschlagleistung (Plus*//Standard Performance) kWh/h 8,6/8,0 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l/min 55 - Schalldruckpegel LpAZ (Fahrerplatz) dB(A) 70 - Humanschwingung: Beschleunigung nach EN 13059 m/s² 0,57 - Anhängerkupplung, Art/Typ DIN Bolzen

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231259, Hermle C600 U, built in 2005, without Cellro magazine, with FANUC robot, without Lang loader (Cellro magazine with FANUC robot and Lang loader can be purchased optionally) Siemens 840 d control system Operating hours: 78,025 Spindle ON: 17,382 Drives ON: 37,955 Tool change: 586,110 NC software: 05.03.39 PLC software: 05.03.21 18,000 SK40 spindle Laser tool breakage monitoring Sensor Oil mist extraction Chip flushing gun X travel: 600 Y travel: 450 Z travel: 450 Rapid traverse in X/X/Z: 35 m/min Infinitely variable spindle speed Weight: approx. 6,700 kg Chip conveyor on the left Additional tank Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool positions Equipment: - Rigid clamping table - NC reversible clamp iTNC - Coolant system standard - Chip conveyor - Enclosed cabin roof section - Electronic thermal compensation (iTNC) - Electronic manual control module (iTNC) - Tool breakage monitoring - Chip flushing gun - Foot switch for clamping/unclamping - 200 bar hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axes in motion: 35 m/min - Acceleration: 5 m/s² - X/Y/Z measuring system: 0.1 µm Optionally available: Cellro magazine, built in 2005, automated storage system with robot for 300 tool holders Technical description of the Cellro magazine with Fanuc robot • Type: Automated storage system (robot magazine) • Capacity: 300 tool holders (for storage and quick tool exchange) Optionally available: LANG Technik automation system with slide arrangement, built in 2005, storage capacity of approximately 50-60 clamping vises. Dimensions & weight of the machine tool: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information, as well as prior sale! Hermle C600 U, year 2005, without Cellro magazine, with FANUC robot, without long loader (Cellro magazine with FANUC robot and long loader can be purchased as an option) Siemens 840 d control system Operating hours: 78025 Spindle ON: 17382 Drives ON: 37955 Dsb Hn Tewh Sbion Rjut Tool change: 586110 NC software: 05.03.39 PLC software: 05.03.21 18,000 Spindle SK40 Tool breakage monitoring Laser Probe Oil mist extraction Chip flushing gun X-path: 600 Y-path: 450 Z-path: 450 Rapid traverse in X/X/Z 35 m/min Stepless spindle speed Weight approx. 6700kg Chip conveyor left Additional tank Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool positions Equipment: - Rigid clamping table - NC reversible clamp iTNC - Standard coolant unit - Chip conveyor - Closed cabin roof section - Electronic thermal expansion compensation (iTNC) - Electronic manual control module (iTNC) - Breakage monitoring tool - Chip flushing gun - Foot switch for clamping/unclamping - Hydraulic unit 200 bar for clamping/unclamping Traverse paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z axis (vertical): 450 mm Table: - Clamping surface: 800mm x 465mm - Maximum table load: 250 kg Axes: - Axes in motion: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Optionally available: Cellro magazine built in 2005 automated storage system with robot for 300 tool holders Technical description of the Cellro magazine with Fanuc robot - Type: Automated st

Condition: refurbished (used), Year of construction: 2019, Functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Dujb Hjwh Sigjn Tn Ret Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Year of construction: 1996, Condition: good (used), Parts cleaning system with ultrasonic cleaning system Manufacturer: LPW Type: Programat FW670/1 Year of manufacture: 1996 Dob Hnji Ra Sfe Tn Rout Medium: Water Heating capacity of dryer: 12 kW Exhaust air: 500 m³/h 400 V 90 A 50 Hz Filling capacity: 0.6 m³ Heating capacity of other baths: 12 kW Electrical connection: 50 kW Ultrasonic cleaning system rated power: 4 kW Length without table: 3000 mm Length with table: 3700 mm Width: 1600 mm Height: 2500 mm Approx. weight: 3 tons ä080525

Condition: used, Year of construction: 2008, operating hours: 5,889 h, Equipment: all wheel drive, Telescopic work platform Genie S 105, AH 34 m * Platform height 32 m * Working height 34 m * Lateral reach 24.5 m Djb Hnjqxcpre Tn Rsut * Telescopic steel construction * Drive via 4 cylinder Deutz diesel engine * 2 speeds * Tire size 385/65D22.5 * Tread depth 12-14 mm * Wheel base 3700 mm * Wheel formula 4x4 * Swing axle * Overall dimensions 14100 x 2500 (3350 extended) x 3100 mm * Weight 19,014 kg * Basket load 227 kg * Rotatable basket * Hydraulic basket arm 1420 mm * Basket steel construction * Basket dimensions (L x W x H) 2170 x 850 x 1100 mm * Basket and ground control We will be happy to send you more information and more pictures on Inquiry. This description does not represent a binding offer and may contain errors. No guarantee for all information.

Condition: new, Circular working area 360 mm Quadrant working area 360 x 360 mm Bundle working area W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Saw blade tensioning: hydraulic Multiple feed 500 mm Drive power 3.7 kW Machine size L x W 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by an IE3 motor with inverter (PMSM, Euate IE4) - User-friendly PC control with touchscreen - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions Dob Hn Tnjwhli Ho Rout - Floating pendulum vise - Two-part front vise - Continuously variable speed control via inverter - Hydraulic blade tensioning - Roller bearing with hydraulically controlled carbide blade guide system - Automatic working height control via quick start sensor - Preset cut counter with shutdown - Nesting device for bundle cutting (downholder) - Power-driven blade cleaning brush - Saw blade monitoring for standstill and blade breakage - Flushing hose for machine cleaning - Work light - 2 m long roller table - One M42 bi-metal saw blade - One set of tools and one Toolbox - Full Cover

Year of construction: 1966, Condition: good (used), A used eccentric press Weingarten in good condition with pneumatic engagement, piece counter, documentation, press test book, spare parts 2 pallets pressure 1500 kN (150 tons) stroke 60 mm ram small / large stroke 10 - 140 mm throat 550 mm Cylindrical holder 30 mm Table W x D 1200 x 1000 mm Deb Hneir I Slj Tn Rsut dimensions W x D x H 150 x 270 x 290 cm Weight 13.500 kg Tech. Data and dimensions: Errors excepted.

Condition: used, Year of construction: 2010, machine/vehicle number: IntNr231258, AC 500 solid - low energy consumption thanks to pressure loss-free filter elements and energy-efficient blowers · Filtration stages for the separation of coolant mist · Filtration principle M (M = mechanical) · Use for emulsion mist · Direct attachment to machine possible · Separation efficiency up to 99% - Extraction capacity 800 m3/h (470cfm) - Blower capacity 1950 m3 / 5 (1,147 cfm) - Energy consumption 0.6 kW - Voltage: 400V - Dimensions: (LxWxH): 500x500x590 mm Deb Hnswh Sare Tn Rout - Weight: 48 KG Subject to changes and errors in the technical data and information as well as prior sale! AC 500 solid - Low energy consumption thanks to pressure-loss-free filter elements and energy-efficient blowers - Filtration stages for the separation of cooling lubricant mist - Filtration principle M - Use for emulsion mist - Direct attachment to machine possible - Separation efficiency up to 99 - Extraction capacity 800 m3/h (470cfm) - Blower capacity 1950 m3 / 5 (1,147 cfm) - Energy consumption 0.6 kW - Voltage: 400V - Dimensions: (LxWxH): 500x500x590 mm - Weight: 48KG Subject to changes and errors in the technical data and information as well as before sale! Translated with (free version)

Condition: good (used), power: 270 kW (367.10 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 7,428 h, Equipment: air conditioning, General information Field of application: Construction Serial number: KMTPC251CHKK70088 Technical information Track width: 70 cm AdBlue system: Yes Make of engine: SAA6D125E-7* Top speed: 6 km/h Empty weight: 48.000 kg Condition Technical condition: good Visual appearance: good Other information Output of the auxiliary hydraulics: 780 l/min Dipper / stick length: 338 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,93x3,765x3,63 Dusbowgyqis Hn Tn Rot Production country: JP Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill diameter 100 mm, extendable vertical: 75 mm M & H 3D Buttons Individual feed motors for each axis – three-phase (brushless) Feed range in X, Y, and Z manual/programmable: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 Duob Hev Rxa Sen Tn Ret Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Probe system Counterholder with counter bearing Chip conveyor with chip trolley Coolant tank: 150 liters Weight approx.: 4,800 kg Machine dimensions LxWxH approx.: 2,950 x 1,840 x 2,150 mm 080525ä

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm Dsb Hnjpgmpde Tn Rout weight: 2500 kg

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231209, Item description: Used machine LNS Express 220 Year of manufacture: 2007 Serial number: 106641-2007 IntNr231209 Type: Bar loading magazine Technical details: Diameter range: 2 mm to 20 mm Maximum bar length: 3,000 mm Installation dimensions (L x W x H): 3,970 x 480 x 1,250 mm Djb Hn Towh R Uhsn Rjut Weight: approx. 850 kg Condition: According to the previous owner, no known defects. Transistor was not connected properly. Age-related wear and tear according to the year of manufacture. Plexiglass cover defective, no other defects are known. Special features: Stability and precision: Identical to the Express 220 and 320 models on the same carrier as the Express 332. Optimal stability and vibration-free operation enable high surface quality and dimensional accuracy with maximum productivity. Loading capacity: Integrated loading ramp with a capacity of 240 mm for high autonomy. Fast diameter change: Easy conversion of the guide channel in less than approx. 2 minutes. Complete change of the guide elements possible in less than approx. 8 minutes. Guiding of 2 mm to 20 mm bar material: Special system in the guide channel prevents the material from shearing out. Automatic opening of the guide channel when material is fed. Summary: The LNS Express 220 is characterized by a robust design, easy handling and high reliability. Despite age-related wear and tear and minor defects, this used model offers a solid basis for precise and efficient production processes.