Used Hurlimann H-466 for sale (24,224)

Year of construction: 2002, Condition: excellent (used), 1 used quick-steaming unit ----- manufacturer : LOOS, Gunzenhausen type : DF 600 capacity : 600 kg/h Debolx Ar Rsvp Srwjut thermal output : 400 kW working pressure max. : 13 bar water contents approx. : 43 l year of construction : 2002 yoc heating coil : 2010 equipped with Weishaupt oil burner WL40 Z-A, 145-570 kW, oil throughput 12-48 kg/h, switch cabinet built on boiler body, feed water pump, and the existing fine and coarse fittings.

Condition: used, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° total power requirement 1,5 kW weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm Duobvp Srjfbh Akewot

Condition: used, machine/vehicle number: C435T06730G, Year of construction: 2009, load capacity: 1,400 kg, lifting height: 8,000 mm, mast type: triplex, construction height: 3,370 mm, drive type: Elektro, Reach truck Chassis number: C435T06730G Mast type: Triplex Technical condition: good Dusbvpeuhxg Ue Srwst Description: Hyster R1.4 H M0325 Year: 2009 Operating hours: n.L The truck is in visually good and technically good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other machines on site.

Condition: used, Year of construction: 2015, load capacity: 4,500 kg, construction width: 1,400 mm, net weight: 92 kg, Fork carriage Load center of gravity: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Duobvp Sou D S Iyorwet Technical condition: very good Description: Quick-change frame with fork carriage plate 1400mm/ FEM3

Year of construction: 1981, Condition: used, Type: BMC 5B Manufacturer: Toshiba Year: 1981 Pallets: 2 pcs 500x500mm pallet changer Djbvp Ssbhn Nmsrwsut Tools: 30 pieces in magazine BT50 Speed: 28 - 3150 1/min Travel: X=630mm y=500mm z=500mm table pitch: 1° table load: 800kg General: Machine is in a good condition technically o.k. optically i.O.

Condition: used, Year of construction: 2015, machine/vehicle number: 29156, 27781, 19678, Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Dujbvp Sovg Iqxsrwet Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 90 mm Material thickness: 0,8 - 5,0 mm Feeding speed: 3 - 30 m / min Roll feeder Material width max.: 30 - 510 mm Material thickness: 0,3 - 4.5 mm Material thickness at max. width: 3,8 mm Material thickness at max. cross section: 430 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 100 mm Feeding speed: 130 m / min Required power: 5,5 kW Standard configuration Extended machine accessories Insertion aidLoop bridge

Year of construction: 1994, Condition: ready for operation (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD heating surface approx. : 20 qm Duobvpolx Azye Srwet capacity max. : 1.000 kg/h working pressure : 13 bar increased test pressure : 23,4 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1994 1 pipe set blind equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings

Condition: good (used), Year of construction: 1995, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 20 rpm, We are selling our Hermle UWF 902 H due to a new purchase. The machine is still in operation and can be tested on site by arrangement. Duobvp Ssvu Slvorwst TECHNICAL DATA: - Year of manufacture 1995 - X 600 mm - Y 450 mm - Z 500 mm - HEIDENHAIN TNC 426 PA - Tool holder SK 40 - Spindle speed 20 to 6300 rpm - Vertical and horizontal machining - Tool changer can change vertically and horizontally - Tool positions 34 - Additional B-axis (diameter 500mm) - Control on 2,214h (overhauled in 2021) - Machine on 59,047h - Program run 23,027h The price stated is net (plus VAT)

Condition: used, machine/vehicle number: H2X392H01457, Year of construction: 2017, operating hours: 5,438 h, load capacity: 2,500 kg, lifting height: 6,400 mm, free lift: 1,800 mm, mast type: triplex, construction height: 2,800 mm, fork length: 1,200 mm, drive type: Treibgas, net weight: 4,040 kg, LPG forklift Fahrgestellnummer: H2X392H01457 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Linde H 25 T No.: M0272 Year of construction: 2017 Operating hours: 5,438 The device is visually and technically in good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other appliances on site. Sideshift, Dobjuhxdysvp Srwout 3rd valve, 4th valve,

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm Dsbvp Srodzqddewout ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Year of construction: 1968, Condition: used, Peddinghaus hole punch year of construction '68 Hole punch 225 B 100 GJ128 special model - large delivery With many accessories Dobvp Sjccqwlorwout

Year of construction: 2011, Condition: excellent (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Debvp Sou Iuzqorwjut Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: ready for operation (used), Siemens 6FX1113-8AA00 basic module E Stand H / 00 , used, normal signs of wear, 100% functional, scope of delivery according to photos Dusbvsi Ed Nfsp Srwet

Year of construction: 2014, operating hours: 6,150 h, Condition: used, Functionality: fully functional, fuel type: diesel, lifting height: 3,350 mm, free lift: 150 mm, mast type: standard, construction height: 2,250 mm, fork length: 1,200 mm, fork carriage width: 1,250 mm, engine type: VW, drive type: Diesel, load capacity: 3,000 kg, machine/vehicle number: H2X393E04204, Diesel forklift Fahrgestellnummer: H2X393E04204 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Hydrostat Condition: Reconditioned with warranty Technical condition: Very good Debevb Rcmsvp Srwjut Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Description: Workshop checked, new UVV & inspection, new paintwork 3rd valve, rear working lights, front working lights, heating, full cab, CE certificate, joystick,

Condition: used, machine/vehicle number: H2X391H03043, Year of construction: 2017, operating hours: 4,154 h, load capacity: 1,600 kg, lifting height: 4,600 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,100 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Dsbveuhxdmep Srweut Fahrgestellnummer: H2X391H03043 Mast type: Triplex Technical condition: very good Front tires type: solid rubber Rear tires type: solid rubber Description: Linde H16T-01 M0356 Year of construction: 2017 Operating hours: 4,154 The machine is visually and technically in very good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We still have a large selection of other devices on site Sideshift, 3rd valve,

Year of construction: 2001, Condition: used, saw blade diameter 400 mm miter . Kühlung Debvpslug Tuo Srweut weight of the machine ca. 1 t number 4 Stück

Year of construction: 2021, Condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands € 3.875,- (net)! Price for transport within Germany (excluding islands): € 550,- (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/80 each with 2x3 adjustable. Arms 1.20 m, 500 kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us! Debvp Seddmq Terwsut

Condition: used, overall weight: 39,000 kg, maximum load weight: 31,800 kg, axle configuration: 3 axles, first registration: 01/2007, Equipment: ABS, * Anfragen gerne per WhatsApp * Auflieger für Wechselbare Presscontainer * Hersteller H&W * Typ: HWDCSS39 * Scheibenbremsen * ABS * Liftachse * Lenkachse * hyrd. Ausschubzylinder * 4 x Containerveriegelung Twistlock * 7200 kg Leergewicht. * Reifen 385/55R22,5 ca. 80-70-80% * deutches Fahrzeug * Neupreis 73000 Euro * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. * Keine Gewähr auf Eingabefehler. Transport zum Hafen möglich Besichtigungen nur nach Vereinbarung, WhatsApp Duobehy R Swjvp Srwot

Condition: ready for operation (used), Siemens 6FX1120-6BA01 PLC-CPU E-Stand: H / 05 SN:493 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Duebsp Ehdujvp Srwst

Condition: used, mileage: 714,379 km, power: 353 kW (479.95 HP), first registration: 07/2011, overall weight: 26,000 kg, fuel type: diesel, color: green, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, loading space width: 2,400 mm, loading space length: 7,600 mm, loading space height: 2,200 mm, Equipment: air conditioning, all wheel drive, tail-lift, * Man TGS EEV 26.480 6X4 H-2 BL Hydrodrive * Lift with articulated axle * Box * Box interior length : 7,60 m * Box inside width : 2,40 m * Box interior height : 2.20 m * Tail lift * Kw 353 * Engine capacity 12419 ccm * Euro 5 EEV * Manual gearbox * Pritarder * Tare weight 11480 kg * Payload 14445 kg * Total weight 26000 kg * Towing capacity 24000 kg * Wheelbase : 4200+1350 * Fin WMA35SZZ7CM588006 * TÜV 12/2024 Dujbvevcwrdsp Srwet * Year of construction 15/12/2011

Condition: used, machine/vehicle number: H2X393H04940, Year of construction: 2017, operating hours: 2,301 h, load capacity: 3,000 kg, lifting height: 4,800 mm, mast type: triplex, construction height: 2,250 mm, fork length: 1,200 mm, drive type: Treibgas, net weight: 4,570 kg, LPG forklift Duebvp Srjuhxb Sjwot Fahrgestellnummer: H2X393H04940 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Linde H 30 T No.: R0077 Year of construction: 2017 Operating hours: 2,301 The machine is visually and technically in good condition. Charger on request Special feature is the trailer hitch. Subject to errors and prior sale. If you have not found your truck, please contact us. We have a large selection of other equipment on site. Sideshift, fork positioner, ZV opening width 1200mm 3rd valve, 4th valve, front work lights, heating, full cab, trailer coupling

Year of construction: 2021, Condition: new, Cantilever rack, one-sided, 3.5m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! Dsbsddmtcevp Srwjut 1 shelf unit with 4 stands 2,899.- € (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 80 Frame: IPE 160 Shelf uprights on one side approx. 3500 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 2250 kg per stand with 4 stands per arm level 4 x 500 kg = 2000 kg with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2017, Condition: new, Cantilever rack, double sided, 3,50m height, 1,20m arms, 750kg per arm - NEW - : Price ex site incl. loading! 1 racking unit with 4 uprights 3.210.-€ (net)! Transport within Germany(without island): 550,-€(net) One cantilever racking unit, hot-dip galvanized, consisting of: 4 shelf uprights double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 adjustable arms 1,20m each, 750kg load capacity per arm with bracings approx. 1,30 m Shelf upright two-sided approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 height adjustable shelf arms each load capacity with center of gravity 600 mm 750 kg per arm / 2250kg per upright with longitudinal and diagonal bracing e = 1300mm, standard is 1,30m. Other standard lengths available from stock: 1m / 1,25m / 1,50m / 1,70m / 1,90m! From the length of 1.50m is a small surcharge to the above price! Special sizes (other center distances) are also available on request, but also cost extra and have a longer delivery time because they have to be made extra! If you do not specify a different center distance, we deliver the shelf with a center distance of 1.30m. In this case the length of a shelf row with 4 uprights (3 fields) is approx. 4m. Delivery with all screws and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Deboddmtqevp Srweut Other configurations (frame height, arm lengths, arm types etc.) selectable! Please contact us!

Year of construction: 2021, Condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm - NEW -: Deboddmqyovp Srweut Price ex location including loading! 1 shelf unit with 4 stands € 4.185 (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/100 each with 2 x 3 adjustable Arms 1.20 m, 860kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 860 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, Condition: new, The prices mentioned in this advertisement are the prices as of mid-2021. Due to the current international situation, steel and transport prices are rising almost daily. The availability of steel raw material is tight and currently unpredictable. Therefore, we ask you to inquire the current prices and availabilities! We will be pleased to submit you a current offer! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm - NEW - : Price ex location incl. loading! 1 racking unit with 4 uprights 2.395.-€ (net)! Duebveddmr Nop Srwjt Price transport within D (without islands): 425.-€ (net)! Of course you can also build longer or shorter shelf units from it by omitting or buying more frames (or also by different axle distances), this example with 4 frames is only the most common shelf solution!!! A cantilever racking system, hot-dip galvanized, consisting of: 4 shelf uprights double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable arms each 1,20m, 500kg load capacity per arm with bracings approx. 1,30 m Shelf uprights two-sided approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 height adjustable shelf arms each load capacity at load center 600 mm 500 kg per arm / 2250kg per upright side with longitudinal and diagonal bracing e = 1300mm, standard is 1,30m. Other standard lengths available from stock: 1m / 1,25m / 1,50m / 1,70m / 1,90m! From the length of 1.50m is a small surcharge to the above price! Special dimensions (a