Used Valtra/Valmet 6000 for sale (3,442)

Condition: good (used), Year of construction: 2006, Technical Specifications – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inches Maximum Swing: 677.5 mm Standard Turning Diameter: 430 mm Maximum Machining Diameter: 633 mm Maximum Machining Capacity: 677 mm Maximum Turning Length (Z-Axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute Output): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Tool turret: • 12 tool positions • Tool sizes: • External turning tool: Ø40 mm • Internal turning tool: Ø20 mm • Milling drill: Ø20 mm • Milling tap: M12 Celjwfynfen Twqbegt Milling spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor power: 5.5 kW (7.5 HP) • Maximum torque: 35 Nm (3.6 kgf m) Coolant volume: 160 liters Machine dimensions: • Width: 1780 mm • Total height: 2533 mm • Space required: approx. 4.51 m² • Machine weight: approx. 5200 kg 1x chip conveyor 1x tray Pictures coming soon

Condition: used, mileage: 406,000 km, Year of construction: 2014, Serial number: YS2R6X4000209xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20198 Specifications: EU approved until: 29.07.2025 Model year: 2014 Mileage: Approx. 406,000 km Gearbox: Automatic Engine: 520 hp, Euro 6 Drivetrain: 6x4 Body: Preferably l Tires: See pictures Retarder Vibrato in case (some faults according to previous owner) High tailgate New batteries Clutch replaced about 2 years ago Length: 742 cm Width: 255 cm Wheelbase: 330 / 135 cm Curb weight: 13,585 kg Rotor beam Trailer hitch Toolbox Celnewdvdyo Twqbegt Sleeping space / bed Radio/CD Air conditioning / AC Description:Scania R520 tandem tipper truck from 2014The truck is EU approved until July 29, 2025 and has recently had new batteries. The clutch was replaced about 2 years ago. Ready for delivery. See video for more information. Km: 406000 HK: 519 Technical approved: Yes EU-approved until: 29.07.2025 Own weight: 13585 Total Weight: 30000 Payload: 16340 Width: 255 Length: 742 Euro: 6 Gearbox: Automatic

Condition: good (used), Bacciottini Pit Stop 36L Automatic Creaser The device is fully functional, ready to work. It is the most efficient creasing and perforating system on the market, solid construction. Made in Italy. Vacuum feeding, non-stop with the possibility of adding material during work. Built-in compressor The set includes tools for creasing and perforation. Technical data: Max sheet size: 360×650 mm Min sheet size: 80×100 mm Max speed (for A4 format): 6000 sheets/h Material weight: 80-400 GSM Max number of creases on a sheet: 20 Distance from the next creasing: 0.1 mm Settings accuracy: 0.1 mm Coln Twewhazdeqbegt Power supply: 230V Power consumption: 1.5 kW Weight: 120 kg Dimensions of the device: 1500x650x1160 mm

Condition: used, Year of construction: 2019, operating hours: 1,623 h, 2019 | Ammann | Ammann AFT 700-3 | Used Asphalt Paver | 1623 hours 📍Location: France, Bourg-de-Péage Cjlnswfuxfe Twqbsgt 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 136000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 52 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good working order, maintenance up to date, hopper 6 M3, width 3 to 6 m. No centralized lubrication. Everything works except the small table cleaning pump. The control panels used on the floor stations are not visible. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37771 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: ready for operation (used), Working width: 220 mm Working height: 120 mm 4 heads Cjln Towhda Rewqbogt Spindle diameter: 40 mm Stepless feed speed adjustment Star-delta start Two-axis head adjustment Electrically adjustable pressure beam Pneumatic feed roller pressure Spindle speed: 6000 rpm Ribbed table surface

Condition: used, Year of construction: 2008, Pressure 130 t Bending length 3200 mm Folding column width 2690 mm Maximum stroke 445 mm Operating hours approx. 49,794 h Total power requirement 24 kW Machine weight approx. 10,900 kg Equipment: – Trumpf Tasc 6000 control system Cgelowgk Hnjn Twqbet – 2 support arms in front of the machine – Foot switch – Laser safe Operating hours: Machine on: approx. 49,794 h Hydraulics operating time: approx. 31,087 h Press beam operating time: approx. 4,655 h Crafter operating time: approx. 313 h

Condition: ready for operation (used), This line can process cold-rolled plate / hot pickled plate / hot galvanized plate / electro galvanized plate / prepainted sheets minimum thickness: 0,3 mm Endproduct: - min/max length: 300/6000 mm - productioncapacity 300 mm 4000 pieces per hour - productioncapacity 6000 mm 1000 pieces per hour - total installed power: 500 kW Line consists of: 1) Soenen 4 armed coilholder Type AL1600/27/4 - max cap per arm: 27 ton - speed: 1 turn per minute - opening hook: 190 mm - power: 2,5 kVa - weight: 26 ton 2) Soenen coilwagon Type HH27 - max cap: 27 ton - max lifting height: 800 mm - min outside dia: 508 mm - displacement: 15 meter - displacementspeed: 8 m/min - turning speed: 10 m/min - weight: 8,6 ton 3) Soenen Decoiler Type AM1600/27V - max cap: 27 ton - min/max width: 250/1600 mm - min/max outside dia: 508/2000 mm - min/max inside dia: 480/520 mm - max decoilingspeed: 100 m/min - weight: 21 ton 4) Soenen feeder rolls + shear Type PR1600 - min/max width: 250/1600 mm - min/max thickness: 0,3/4 mm - dia of rolls: 160 mm - speed: 20m/min - weight: 3 ton 5) Pit 6) Soenen Puller Type 2VR1600EE Cjlswdy Sbsn Twqbsgt - min/max width: 250/1600 mm - min/max thickness: 0,3/4 mm - dia of rolls: 95,5 mm - productioncapacity 500 mm 4000 pieces per hour - productioncapacity 6000 mm 1000 pieces per hour - max speed: 150 m/min - weight: 5,8 ton 7) Soenen high speed mechanical shear Type CGM4-16 - min/max thickness: 0,3/4 mm - 6 mm st37 - max length: 1600 mm - cuttingangle: 1° - 200 strokes per minute - interchangable cassette with cuttingknives - weight: 7,6 ton 8) Soenen outfeed - speed: 170 m/min - width: 1600 mm - length from cuttingline: +- 7000 mm - weight: 4,2 ton 9) Soenen Outfeed conveyor Type TB1,6 x 7 - width: 1600 mm - length starting from cutting line: +- 7000 mm - speed: 170 m/min - power: 2x 15kW - weight: 4,2 ton 10) Soenen Stacking unit Type MTB1,6 x 3D - min/max width: 250/1600 mm - min/max length: 300/6000 mm - min/max thickness: 0,3/4 mm - max stackingcapacity: 4000 pieces/hour - transportspeed: 180 m/min - weight: 21 ton Workwidth x sheetthickness: 1600 x 4 mm Straightner: no Shear: yes

Condition: used, Year of construction: 2011, Serial number: YY9AAA2646B01xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17479 Coln Tevg Nrdswqbegt Specifications: - 2011 model - Tires (see pictures) - Air suspension - Length: 1,305 cm - Width: 255 cm - Wheelbase: 136/538 cm - Net weight: 6,100 kg - Max payload: 29,900 kg Description: 2011 Trailer-bygg timber trailer. Can be delivered within a short time and put straight into operation. Technical approved: no EU-approved until: 02.05.2023 Own weight: 6100 Total Weight: 36000 Payload: 29900 Width: 255 Length: 1305

Condition: used, Year of construction: 2000, Suitable for cleaning cooling oil used in carbide grinding. Accessories: 6 filter towers, automatic backflushing, magnetic separator. Cgjln Twqjv N Iuiebot container content: 4000 l Flow rate max: approx. 360 l/min. Filter fineness:: greater than 0.003 mm Connected load approx.: 9.0 kW (400 V / 50 Hz) Dimensions W x D x H: 6000 x 1200 x 1650 mm Weight approx.: 2000 kg colour: light grey

Condition: good (used), Year of construction: 2018, swing dia. 600 mm turning diameter 310 mm turning diameter over slide 355 mm spindle bore 53 mm bar capacity 45 mm turning speed range 6000 U/min turning length 388 mm travel -z axis 400 mm travel -x axis 220 mm turret (x-stations) 12 control SIEMENS 828D (Touch) c-axis 0,001° 0 total power requirement 20 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. LTH 3,7 x 2,0 x 2,0 m Includes preparation for automation (loading robot) Year of manufacture: 11/2017, delivery: 2018 - Automatic door - 12-station tool turret, driven at 5,000 rpm Coln Tjwgi Hyewqbegt - Workpiece catcher - RENISHAW touch probe, automatically retractable - Tailstock - Chip conveyor - Coolant pump Accessories: Including collet chuck Including 2 x driven tool holders (radial + axial) Including 9 x fixed tool holders Including USB & LAN interface Including manuals

Condition: good (used), Year of construction: 2001, sliding table length 3200mm manual regulation of blade angle electric regulation of blade up/down blade speed 3200/4000/6000 RPM cutting width 1400mm delta/star start Cgoln Twqsh E Sl Asbot motor power 5,5kW weight 850kgs

Condition: used, Year of construction: 2005, Pressure 230 t Bending length 4250 mm Column clearance 3680 mm Thrust 420 mm Ram stroke 445 mm TASC 6000 control system Machine weight approx. 19,200 kg Accessories/equipment: – 2 support arms – 1 bending aid – 2 stop fingers Cgsln Twowgk E Doqbot – Light barrier in front of the machine – Foot switch

Condition: good (used), mileage: 627,134 km, power: 368 kW (500.34 HP), first registration: 08/2018, fuel type: diesel, color: red, axle configuration: 6x2, tire size: 315/70R22,5, fuel: diesel, wheelbase: 3,950 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, parking heater, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Digital Tachograph - Tachograph (Control Unit) - Fixed - High Roof - Additional Braking System = Remarks = Number of axles: 3, Configuration: 6x2, Tare weight: 8562 kg, Gross weight: 26000 kg, Total tank capacity: 708 liters, 2nd Diesel Tank, Fifth Wheel Height: 119 cm, Fifth Wheel: Fixed, Number of Locks: 1, Suspension Type: Air Suspension, Cabin Type: High Roof, Cruise Control, Tachograph (Control Unit), Digital Tachograph, Air Conditioning, Auxiliary Heating, Color: Red, Engine Power: 368 kW (493 Hp), Euro: 6, Transmission Type: AS-Tronic, Gears: 12, Additional Braking System, Retarder Brand: Intarder, Power Steering, ABS, ASR = Additional Information = Transmission Cgeln Twov N Uqweqbet Transmission: 12-speed, automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire profile: 11 mm; Right tire profile: 9 mm; Suspension: Leaf springs Axle 2: Lift axle; Left tire profile: 12 mm; Right tire profile: 11 mm; Suspension: Air suspension Axle 3: Dual tires; Left tire profile: 16 mm; Left tire profile: 16 mm; Right tire profile: 7 mm; Right tire profile: 7 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 672 x 255 x 362 cm Weight Curb weight: 8,562 kg Payload: 17,438 kg GVW: 26,000 kg Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 2 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: ready for operation (used), nominal power (apparent): 45 kVA, controller manufacturer: Fanuc Series 18i-MB, total length: 11,000 mm, net weight: 24,000 kg, total depth: 6,000 mm, Type: MCH-800 Colnev Sfqgj Twqbsgt Distance of spindle end to table center: 300 1300 mm Distance of spindle center to table surface: 50 1050 mm Max workpiece dimensions: 1400 x 1200 mm cooling through spindle X-axes: 1350 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: (5x) 800 x 800 mm (continuous indexing) Max weight on the table: 2 ton Admission in spindle (ISO): ISO-50 Power on the spindle: 18,5 kW Toolstore: yes Tools: 90 positions Frequency: 1 > 6000 rpm (option!!)

Condition: used, Year of construction: 2019, operating hours: 1,320 h, load capacity: 16,000 kg, lifting height: 5,600 mm, free lift: 1,950 mm, mast type: triplex, power: 122 kW (165.87 HP), fork carriage width: 2,590 mm, ground clearance: 200 mm, front tire type: Trelleborg, front tire size: 12.00-20, rear tire type: Trelleborg, rear tire size: 12.00-20, total length: 8,000 mm, wheelbase: 3,750 mm, engine type: Cummins QSB6.7, drive type: Diesel, construction width: 2,600 mm, net weight: 24,470 kg, - Antrieb: Diesel - Bedienung: Sitz - Tragfähigkeit (kg) 16000 - Lastschwerpunkt (mm) 1200 - Lastabstand (PIN-Typ) 1077 - Reifen: Luft - Achsbelastung mit Last vorne/hinten kg (900 mm Lastschwerpunktabstand) 41,640 / 3,377 - Achsbelastung mit Last vorne/hinten kg (1200 mm Lastschwerpunktabstand) 39,145 / 3,363 - Achsbelastung ohne Last vorne/hinten kg 13,430 / 13,078 - Anzahl der Räder, vorne/hinten (X = angetrieben) 4X / 2 - Spurweite, vorne (mm) 2,400 - Spurweite, hinten (mm) 2,175 - Hubgerüstneigung: a = vorwärts/ b = rückwärts 10/12 ° - Höhe Hubgerüst eingefahren mm 4,390 - Sitzhöhe mm 2,145 - Kupplungshöhe mm 822 - Arbeitsgangbreite bei 2400x2400 Paletten quer mm 8,900 - Wenderadius mm 5,253 - Kleinster Drehpunktabstand mm 840 - Fahrgeschwindigkeit mit/ohne Last km/h 26/28 - Hubgeschwindigkeit mit/ohne Last m/sec 0,33/0,38 - Senkgeschwindigkeit mit/ohne Last m/sec 0,34/0,39 - Zugkraft mit/ohne Last bei 1,6 km/h 97/99 N - Max. Zugkraft mit/ohne Last 126/128 N - Steigfähigkeit mit/ohne Last bei 1,6 km/h % 24/42 - Max. Steigfähigkeit mit/ohne Last bei 1,6 km/h % 32/35 - Beschleunigungszeit mit/ohne Last (0-15 m Abstand) sec 5,9/6,5 - Betriebsbremse Hydraulisch Cgjln Twsvdxn Aoqbjt - Motorhersteller und -typ Cummins QSB6.7 - Zylinderzahl/Hubraum Stage IIIA/B no./l 6/6,7 - Antriebssteuerung Drehmomentwandler - Druck Anbaugeräte MPa 15 - Öldurchfluss Anbaugeräte l/min 105 - Abschleppvorrichtung: Welle

Condition: used, Year of construction: 2019, Functionality: fully functional, System consisting of: 1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive Software expansion for each robot: Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance 2 ICSE LD offline lasers Robot 1 single-wire tandem welding equipment with automatic torch change system: 2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning Csln Twewgd Hzoqbjgt Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2 2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m), 1 L manipulator Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status. Both robots can weld on the hall beams, and robot 2 can also weld on the L manipulator. 1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct. Delivery date: available immediately. Appointment by arrangement.

Condition: used, Year of construction: 2013, turning diameter 340 mm swing diameter 420 mm turning height 315 mm Control S 840 DSL x-travel 850 mm z-travel 315 mm spindle turning speed - stepless 0- 3400 U/min main drive 37(48) kW feed in x - axis 0- 45 m/min feed range Z-direction 0- 30 m/min work piece power 19 kW toolpiece turning speed range 0- 6000 U/min total power requirement 60 kW weight of the machine ca. 12 t Cgsln Twqswfhq Iebet dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Machine is offered without chuck and tool holders.

Condition: used, Year of construction: 2003, Cutting range at 90 degrees: round Ø 335 mm Cutting range at 90 degrees: flat 500 x 335 mm Saw blade length 4400 x 34 x 1.1 mm Cutting speed 18-115 m/min Lowering speed 0 to 300 mm/min Working height 750 mm Machine weight approx. 1,550 kg Space requirement approx. 2230 x 2350 x 1900 mm Accessories/equipment: Bundle clamping range: – Width: 0 – 500 mm – Height: 15 – 335 mm Material feed: – Single: 0 – 600 mm – Multiple: 0 – 6000 mm Remnant length: Manual: approx. 70 mm Automatic: approx. 110 mm Cjln Tewgktuewqbjgt

Year of construction: 1999, operating hours: 55,234 h, Condition: ready for operation (used), General Data Measurements width 2100 mm Measurements depth 2660 mm Measurements height 1780 mm Machine weight 6000 kg Control Unit Model U - 100L Main Drive Number of spindles 2 Spindle speed range 6000 rpm Spindle motor power 7.5 kW Spindle bore 53 mm Movement X-Axis Movement 195 Z-Axis Movement 700 Turret Number of turrets 2 Additional Equipment Number of tools: 12 This 3-axis Okuma LT 10-M horizontal turning machine was manufactured in 1999. It features a maximum turning length of 130 mm and a turning diameter of 210 mm. With a spindle speed of 6000 rpm and motor power of 7.5 kW, it's designed for precision. Ideal for those looking to buy this Okuma LT 10-M horizontal turning machine. Contact us for more information. Application Types Cjlnowg Ib Nj Twqbsgt Turning

Condition: good (used), Year of construction: 2009, Ref. -No.: 10521 Manufacturer: LAGUN Type: CM 6 Year of construction: 2009 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Spain X-Travel: 6000 mm Y-Travel: 1200 mm Z-Travel: 2000 mm C-Axis: 0,001 ° Rapid Traverse X/Y/Z: 30 m / min Table surface area (LxW): 7500 x 1100 mm Tool changer: 60 Drive power spindle: 60 kW Cgjlnewfy Hnj Twqbst Table load max.: 5.000 kg Tool Taper: SK 50 Spindle Speeds: 6.000 RPM Further information: Automatic universal swivel head 1° x 1° incl. accessories, tools, holders 4th axis preparation (rotary table) Positioning accuracy: ± 0.030 mm Repeat accuracy: ± 0.010 mm Machine is in production and can be inspected under power at any time.

Condition: good (used), mileage: 296,620 km, power: 340 kW (462.27 HP), first registration: 02/2012, fuel type: diesel, color: red, axle configuration: 6x2, tire size: 315/80R22,5, fuel: diesel, wheelbase: 4,600 mm, brakes: retarder, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Year of construction: 2012, Equipment: ABS, air conditioning, cruise control, retarder, traction control, trailer coupling, = More options and accessories = - Digital tachograph - Tachograph (control unit) - Short cabin - Power take-off - Pump - Additional braking system = Remarks = Number of axles: 3, Configuration: 6x2, Own weight: 11750 kg, Gross weight: 26000 kg, Total tank capacity: 260 litres, Trailer coupling, Kingpin diameter: 40 DIN, Number of locks: 1, Suspension type: Air suspension, Cabin type: Short cabin, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Color: Red, Engine power: 340 kW (456 Hp), Euro: 5, Gearbox type: Manual, Gears: 16, Clutch pedal, Additional braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Power take-off, Body material: Steel, System length: 610 cm, Pump, Hook device Height: 137, 6X2 FAN / STEERAXLE / INTARDER / MANUAL GEARBOX = More information = Gearbox Gearbox: 16 gears, manual gearbox Axle configuration Tyre size: 315/80R22.5 Brakes: disc brakes Axle 1: steered; tire profile left: 5 mm; tire profile right: 5 mm; suspension: leaf spring Axle 2: twin tires; tire profile left inside: 2 mm; tire profile left outside: 6 mm; tire profile right inside: 5 mm; tire profile right outside: 4 mm; suspension: air suspension Axle 3: lift axle; steered; tire profile left: 5 mm; tire profile right: 6 mm; Suspension: air suspension Dimensions Cjln Tsv Hdhajwqbjgt Dimensions (L x W x H): 930 x 255 x 307 cm Weights Empty weight: 11,750 kg Payload: 14,250 kg GVW: 26,000 kg Functional Loading area height: 116 cm Pump: Yes Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2012, turning diameter 340 mm swing diameter 420 mm turning height 315 mm Csln Twqowfhqzebjgt Control S 840 DSL x-travel 850 mm z-travel 315 mm spindle turning speed - stepless 0- 3400 U/min main drive 37(48) kW feed in x - axis 0- 45 m/min feed range Z-direction 0- 30 m/min work piece power 19 kW toolpiece turning speed range 0- 6000 U/min total power requirement 60 kW weight of the machine ca. 12 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Machine is offered without chuck and tool holders.

Condition: new, Year of construction: 2025, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2025 Type of control: CNC Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Cgeln Twqswfy Dgsbot Weight: 195 tons Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 3800 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Weight Of The Machine Ca.: 65 t Bore Depth: 2000 mm Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment Celn Tswfyz Eowqbjgt - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2007, Ref. -No.: 10357 Manufacturer: STARRAG HECKERT Type: HEC 630 Athletic Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Storage location: Halberstadt Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Cgslswfyybjn Twqbot Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Feed Capacities X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 RPM Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Weight Of The Machine Ca.: 25 t