Used International 706 for sale (8,651)

Year of construction: 2006, condition: good (used), Configuration • Unwinder • Register Control System • Flexo Unit (Ink / Varnish application) • Laminating / Cold Foil Unit • Die Cutting Unit • GEW UV Dryer • Slitting Unit • Rewinder _____ Codpfsynkwnex Aiteha Machine Description The ABG Digicon 1 is designed as a modular finishing solution for digital and flexographic label production. The installed flexo unit allows varnish or spot colour application. The laminating / cold foil module enables added-value embellishment. The die-cutting and slitting units ensure precise finishing and roll conversion. The semi-rotary functionality provides cost-efficient short-run flexibility, while full-rotary mode enables higher productivity. _____

Condition: excellent (used), load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with 6 ton load capacity Speed steplessly adjustable from approx. 0.01 to 1.1 rpm Diameter 2.15 m New electrics With hand and foot remote control Cjdewz Rfyopfx Aitoha

Condition: good (used), For sale is a shaft mixer from Stelzer Rührwerke International GmbH. It is the SM460-DF model. Cjdpofr Icuofx Aitsha Product data: 1455 RPM 400V 18.5 kW Shaft length 720mm Impeller diameter 280mm Further data can be found on the nameplate (photo).

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 04.522, total length: 7,820 mm, total width: 2,550 mm, total height: 2,670 mm, 2005 UBH INTERNATIONAL 20FT SWAP BODY tank container 34,570L / 1-component / 4 baffles, 5 lids UN PORTABLE T11 EMKD steam heating bottom discharge 17441 1.4401 valid for 5 years + CSC inspection until 04-2028 = Further information = General information Year of manufacture: July 2005 Model year: 2005 Usable material: Chemicals Weights Empty weight: 4,475 kg Payload: 31,525 kg GVW: 36,000 kg Functional Load compartment volume: 25,000 l Body brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of compartments: 1 Condition Technical condition: very good Optical condition: good Further information Please contact Arne Honingh for more information. Csdpezdkyaefx Aiteha

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: P.0020001424, X-Ray Yxlon international MU231 - fully functional (2003) Fully automatic, 100% x-ray inspection of alloy wheels using YXLON's Y.AI/Rel.9 ADR program reaches a cycle time below 25 seconds per wheel. The automatic defect. Fully functional X-Ray for alu wheels. Possible alu wheels from size 12 to 19. Chjdsx Hqnrspfx Aitja Machine is fully working, perfect condition. During 2025 full repas was done - all issues are now sorted (tested). Software is unlocked. New owner can test the machine before purchase (Central Bohemia). Machine label attached. Price: 49.000 EUR excl. VAT (price does not include transport and duties) Invoice will be issued in EUR from Czech company. When you will have any questions, do not hesitate to contact us - e-mail / WhatsApp / call Lead cabin (1) with shuttles (2) for the transport of wheels in/out the cabin Decollators to get single wheels for transportation in the cabin X-ray tube (3), Image Intensifier (4), High-voltage generator, X-ray control unit (5) Industrial PC (6) (with mechanical positions and X-ray parameters for every wheel type) Control cabinet with PLC (7) Wheel manipulator (8) (Rotation and linear movement of wheels) X-ray-manipulator (9) (tilt axis with X-ray tube and Image intensifier) Vision System for wheel type recognition Image-Processing Unit (Host PC with Slave PCs) Output conveyor (10) e.g. with an alterable switch (for accepted wheels / rejects)

Condition: excellent (used), IM Very good condition. Csdpjw Ebwuofx Aitoha

Condition: new, Year of construction: 2025, functionality: fully functional, The granular mixer is available in 6 versions: The version can be made of stainless steel or coated steel: Technical specifications: MV 2 The MV 2 is designed for the complete mixing of the entire plastic granulate, due to the forced guidance provided by the screw sleeve. Container capacity: 120 kg / 200 L Cedpfx Aiod R Atrjtoha L x W x H: 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Screw, removable - Control for mixing times - Extraction device - 1 drain - Mobile base frame, running rollers 100 mm, all with parking brake.

Condition: used, For sale: Purex International Laserex 210 and PF OLX 211MU; Serial No. LX-396; Date: 22/10/03; 230V; 50/60Hz; 450W Filter part no. 113505, HEPA/Chemical Filter Dimensions with wheels: 106 x 50 x 43 cm Net price: 470 EUR Chjdpszcum Aofx Aitja Negotiable

Condition: new, Year of construction: 2026, Angled conveyor belt available in various lengths and widths, as well as different speeds. - Can be moved on steerable stop rollers. Cjdelkdbyspfx Aitjha - Angle is adjustable. - Cleat height: 30 mm. - Spring-assisted height adjustment.

Condition: new, Year of construction: 2026, functionality: fully functional, The NPS belt conveyor is for sale. It can be ordered in various lengths and usable widths. - High-quality aluminum profile, anodized, with grooves - Without guide plates - Smooth PU conveyor belt, temperature-resistant from -10°C to +90°C - Mobile substructure, adjustable from 900 - 1300 mm Chedpfx Ajlkda Hoitsa - Worm gear motor, 3 x 400 V, 50 Hz - Constant belt speed of approximately 6.0 m/min - Motor protection switch with 5 m cable & CEE plug

Condition: new, Year of construction: 2026, functionality: fully functional, Z-type belt conveyor, type NDZ, available in various lengths and widths - High-quality aluminum profile, anodized, with grooves - Rubber-coated drive roller - Aluminum side guide, 50 mm high - PU conveyor belt with cleats, 30 mm high - Mobile substructure with adjustable angle - Motor protection switch with 5 m cable & CEE plug Cedjg Arxvspfx Aiteha Available upon request: - Custom size - Timed control - Frequency inverter (€485) - Wavy edge (€492)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Prodim proliner 8XCS scanner. Includes software. Small tripod. Leaps. Backpack. IPT and hook pen and remote. Extras included - Heavy duty plastic carrying case. Extra remote. Measuring support bars. Chodjyl Spajpfx Aitea

Condition: new, Year of construction: 2022, *WAREHOUSE CLEARANCE* *DISCOUNT OFFER* The conveyor belt is from 2022, new and unused. We offer a 1-year warranty. New price from model year 2023: €1,870 L: 2000 mm W: 150 mm Mobile Belt speed: 3 m/min, but can also be adjusted Csdpfx Aijhy Edvetjha Height adjustable: 840 mm - 1240 mm Additional information: Available with or without guide rails/side walls (height: 60 mm)

Condition: new, Year of construction: 2022, For sale is a CTM CT 200 container from MASS. These are available in various sizes (see pictures). Cedoip Ucnopfx Aiteha

Condition: new, Year of construction: 2025, functionality: fully functional, The Z-conveyor belt is for sale with the following technical data: Z-belt conveyor Type NDZ - Specifications. Cedpow Nrm Hjfx Aitsha Feeding height: 500 mm Incline belt length: 1800 mm Discharge height: 500 mm Useful width: 600 mm, overall width: 750 mm Cleat height: 30 mm Discharge height: max. 1600 mm, min. 1150 mm Belt speed (constant): approx. 6 m/min Aluminum side guides, 60 mm high Mobile base frame with braked castors Reinforced conveyor belt, temperature resistant from -10°C to +90°C

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The angle conveyor from MASS is for sale: Type NC - SPEC 500/1800 x 600 Infeed section: 500 mm Incline section: 1800 mm Usable width: 600 mm, total width: 750 mm Conveyor speed (constant): 6 m/min Mobile base frame with brake rollers Discharge height: max. 1500 mm, min. 1100 mm Cjdpfxew Nrpbj Aiteha Side guide: 60 mm PU belt with 30 mm cleat height, temperature resistant from -10°C to +90°C Motor protection switch with 5 m cable & CEE plug

Condition: new, New equipment MASS International NPS accumulation conveyor Conveyor belt / accumulation belt Codpfx Aieizi S Deteha available for short-term delivery Accumulation surface without side walls Height-adjustable, mobile on steerable swivel casters Example: NPS 1 Length 1500 mm Usable width 250 mm External width 250 mm (without motor) Accumulation surface without side walls, therefore full usable width Height-adjustable discharge height 200 - 400 mm PU belt, smooth, black Belt speed 3 m/min Conveyor belt mobile on steerable swivel casters The quoted price refers to the NPS1. Optional: Dimensions according to any customer request Belt approved for food (FDA compliant) Modified belt speed Frequency inverter for stepless adjustment of the belt speed etc.

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Csdpfx Aijyabxyotsha Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Chedpfx Aswty Eteitoa

Condition: excellent (used), Printing International Cristal 90X2 Chedpfx Aiov Iyh Sstea

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23A0017, turning diameter over cross slide: 520 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, total height: 1,890 mm, total width: 1,620 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, CNC Lathe, with 45° inclined bed - COGENTECH > Siemens 808D control > Siemens motors > Linear guides Chjdpfx Aisvwbvpotoa > 6'' hydraulic universal with 3 jaws > 6-station electric turret

Condition: used, Year of construction: 2005, functionality: fully functional, For sale is a complete shrink sleeve system consisting of an Etisleeve sleeve applicator and a multi-zone steam shrink tunnel Powersteam, both from the renowned manufacturer Sleever International. The system was in productive use until recently and efficiently processes shrink sleeves with high precision onto cylindrical containers. Machine Configuration: Sleeve Applicator Manufacturer: Sleever International Model: Etisleeve Type: 75 SL 2V 80 Year of manufacture: 2005 CE-compliant Steam Shrink Tunnel Manufacturer: Sleever International Model: Powersteam Type: MSA 250 Year of manufacture: 2005 Control & Operation – Integrated HMI control panel – Digital input of sleeve length – Performance display (products/min) – Cycle and process control – Safety monitoring (housing supervision, reset function) – Production and daily counters Technical Features: – Precise vertical sleeve application – Automatic sleeve film unwind – Centering station for precise positioning – Multi-zone steam shrink tunnel with stainless steel interior – Continuous stainless steel conveyor belt – Auger feed with interchangeable augers – Height- and format-adjustable guide rails – Full safety glazing with interlock system – Industrial-grade drives and robust mechanical components Formats & Performance: – Proven operation with 100 ml containers – Documented sleeve lengths (e.g., 155 mm) – Additional formats possible depending on configuration – Output depending on product approx. 40–80 containers/minute Condition: – Used – Complete and fully functional system Scope of Delivery: Cjdpfx Asx Tg Uboitoha – Etisleeve sleeve applicator – Powersteam steam shrink tunnel – Integrated conveyor technology – Feed screws and visible format parts – Existing adjustment and format documentation The system is currently still fully assembled and available for inspection under production conditions. A live demonstration with product and sleeve film under power is possible by prior appointment. Location: – Berlin – Inspection possible Price: – On request

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Chedpfx Aijhg Rcxotja Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 81019 01, grinding depth: 500 mm, grinding diameter: 800 mm, grinding spindle speed: 250 rpm, workpiece diameter (max.): 800 mm, pivoting range: 15 °, Machine in special design with increased grinding diameter and extended, hydraulic cross travel! Reconstructed and modernized in 1995 at the manufacturer's plant in Glauchau and commissioned in 1996. TECHNICAL DETAILS Working area and grinding diameter Internal grinding diameter: 30–630 mm Extended internal grinding diameter max.: 800 mm External grinding diameter max.: 800 mm Workpiece diameter max.: 800 mm Grinding area and table movement Grinding depth: approx. 500 mm Table stroke: 800 mm Grinding diameter with workpiece protection max.: 800 mm Grinding diameter without workpiece protection: approx. 850 mm Distances and adjustments Distance workpiece spindle head – grinding spindle carrier: max. 1,225 mm Adjustment of the internal grinding attachment on the table: max. 545 mm Cross travel of the workpiece spindle stock: max. 650 mm Swiveling of the workpiece spindle stock: max. 15° Workpiece spindle Workpiece spindle speeds: 16 / 22 / 32 / 45 / 63 / 90 / 125 / 180 / 250 rpm Workpiece weight: max. 1,000 kg Spindle head: DIN 55021, size 11 MACHINE DETAILS Control and position display Control type: conventional Cross travel: via geared motor and positioning device Digital position display: HEIDENHAIN, 2 axes Coolant system Coolant system: with magnetic separator Machine weight: approx. 6.4 t EQUIPMENT Coolant system with magnetic separator Fixing devices or machine feet Various grinding wheels Diamond dressing tool Large grinding plate Internal and surface grinding attachment Halogen machine lamp Chedpfx Aiozqcvtstea Machine documentation

Condition: ready for operation (used), Heidenhain LS 706 length measuring rod ML: 2040 . 277504 35 SN:5996409E + AE 10 reading head . 276 504 01 D, used, normal signs of wear, 100% functional, scope of delivery as per photosATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Chodpfx Ajx Ht D Njitsa