Used Mc Cormick Mtx 135 for sale (6,972)

Condition: reconditioned (used), Year of construction: 2008, operating hours: 45,000 h, Emco Maxxturn 45 with Y-axis for sale Cgobvaov I Uavopgqst + Bar feeder and accessories (can be viewed under power) Year of manufacture 2008 On-time hours: 45,000 Very good condition Siemens control with ShopTurn High-pressure pump Has been overhauled and serviced Work performed: Main and counter spindle belts have been replaced! Geometry completely measured and adjusted. Drop tray bearings have been replaced Counter spindle slide plate + wiper have been replaced New main drive module + Complete Euro pallet with tools and various collets + Chucks for main and counter spindles, jaw chucks and collet chucks

Condition: repair required (used), Year of construction: 1998, For sale here is a cycle-controlled lathe Emco MAT E200! Cjbvou U Nk Dsapgqegt The machine has a control defect and does not start! For further questions I am at your disposal

Year of construction: 2011, Condition: excellent (used), Traverse For lifting glass packages Maximum lifting capacity: 6000 kg Crane mounting Cgobvapsp U Ua Rsgqst In very good and clean condition Available immediately

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD – SPA – class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weighing scale Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and – tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g Stores 800 different dosing recipes Cjbvapsv S Iywogqogt Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V – single-phase Doser / control box connection: direct Materials in contact with the ingredient : 304L electro-polished stainless steel. GMP-compliant construction Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: good (used), Code: 0037 Cgsbvapov Ab Dwjgqjt Brand: OMC - ITALY Model: PL/CONVERSION-S - CE Standard Membrane press with loading on the front side - CE Standard Multifunctional air membrane press, allows extreme versatility in one machine only of all types of finishing of the panel It can be operated as: Cold press Hot press Membrane press for Pvc coating or veneer of shaped panels form one side only Membrane press for Pvc coating or veneer of indentations in the wood from both sides Technical data: Work platens dimensions 2500 x 1300 mm Perforated steel platens Useful tank dimensions 2350 x 1180 x 50 mm N° 10 pistons - stroke mm 400 Pressure kg/cm2 6.5 Overall dimensions mm 3200 x 1800 x 2700 Weight kg 8000

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 021902SA04, overall weight: 1,350 kg, Equipment: documentation/manual, The highly flexible Master 80 HF allows changeover in just 1 minute for round and polygonal profiles from 15 to 80 mm in diameter. Cgebvapgswdwt Asqst Thanks to its innovative structure, the MASTER 80 HF can process bars from 15 to 80 mm in diameter in a single channel. The material support adjustment is automatic. The use of the front centering device allows optimal use of the loading magazine with any type of bar material, both hexagonal and square. The material pusher, which is heavier and more stable than the previous version, is radially clamped and locked by pairs of rollers. This, along with additional stabilization of the loading magazine, ensures the processing of bars from 15 to 80 mm in diameter. High Rigidity The thorough research and structural design of the Master resulted in a product with extreme torsional and longitudinal rigidity, eliminating any vibration. Front Bushing The front guide bushing also guides the bar between the loading magazine and the lathe, eliminating any vibration. Replacing the two half bushings takes less than 30 seconds. Axial Shifting Device The loading magazine features an axial shifting device that allows easy access to the lathe.

Condition: excellent (used), Year of construction: 2008, Digital display Travel paths x/y/z 450/350/400 Tool holder: SK 40 Swivelling vertical milling head Speed 5000 rpm All axes with linear guides Ball screws in all axes Coolant system Cobvaov Up U Uepgqogt Accessories

Condition: as good as new (ex-display), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: F130507, throat depth: 320 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 65 rpm, total height: 2,050 mm, drilling capacity: 30 mm, column diameter: 120 mm, total width: 510 mm, total length: 870 mm, spindle mount: MK 3, drilling depth: 135 mm, table width: 450 mm, table length: 500 mm, input voltage: 400 V, height adjustment type: mechanical, Dear Sir or Madam, We are offering a demonstration pillar drill "HXMC model Z5030A" with paint damage. We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. Csbvapjv T Atnegqogt No returns accepted.

Condition: excellent (used), Year of construction: 1974, Functionality: fully functional, manufacturer: FMC model:M75 BB13295 Mechanical speed 160 cycles per min. min repeat 120mm max draw length 320mm. Manufactured 1974. retrofitted with servo's approx. 1994 NUM drives and servomotors A lot of spare parts and equipment available. Stiegler TS800 Maximum sealing width: 800mm Unwind in line with 2 positions Servo driven film feeding rolls Photocell for printed film Pick off section Stacking table Cobvapgewgkd Heqogt Refurbished with touchscreen Package price for both machines possible.

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD – SPA – class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weighing scale Cjbvapgev Sntdeqogt Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and – tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g Stores 800 different dosing recipes Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V – single-phase Doser / control box connection: direct Materials in contact with the ingredient : 304L electro-polished stainless steel. GMP-compliant construction Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Cebvsv A Ta Deapgqsgt Weight kg 2500

Condition: excellent (used), Year of construction: 2008, DMG CTX 510 Sinumerik 840D Cgsbvjr Ak S Noapgqet Machine in prefect condidtion, equipped with bar feeder and C axis Spindel working 6720 hours Spindel bore 95mm Collet chuck Forkardt D=100mm max Tools holder VDI 40

Condition: ready for operation (used), Year of construction: 2022, Control Unit Brand SIEMENS Cgsbvajwbataspgqot Model sinumerik 840 D Main Drive Number of axis 3 Movement X-Axis Movement 200 mm Y-Axis Movement 150 mm Z-Axis Movement 150 mm Additional Equipment Complete cooling system Central automatic lubrication Touch screen, keyboard, mouse, and control panel This 3-axis EMCO Concept Mill 105 was manufactured in 2022. Ideal for precision CNC milling, this machine offers robust construction and modern design. If you are looking to get high-quality milling capabilities consider the EMCO Concept Mill 105 machine we have for sale. Contact us for more information. Application Types Milling

Condition: as good as new (ex-display), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: I1305008, throat depth: 250 mm, spindle speed (max.): 2,880 rpm, spindle speed (min.): 125 rpm, drilling capacity: 25 mm, column diameter: 110 mm, spindle mount: MK 3, drilling depth: 130 mm, overall weight: 320 kg, type of input current: three-phase, input voltage: 400 V, height adjustment type: mechanical, Dear Sir or Madam, We are offering a demonstration pillar drill "HXMC model Z5025" with paint damage. We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted. Cgsbvaov T Anrepgqot

Condition: used, Year of construction: 2017, operating hours: 3,814 h, 2017 | McCloskey | McCloskey I44R Impact | Used Crusher | 3814 hours 📍Location: France, Châteaurenard 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 255000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 79 inspection points 76 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine in working order, inspected on site ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38563 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite Cgjbvapev S I Ubegqjt ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: good (used), Year of construction: 1995, 1 used center lathe Make MCM Type TC 300 x 2000 Year of manufacture 1995 Technical specifications: Cebvapovzllcsgqsgt Center height 300 mm Turning diameter 600 mm Center distance 3000 mm Bed width 400 mm Spindle bore 82 mm Spindle nose Spindle speeds (24) 9 - 1600 rpm Motor power 7.5 kW (option: 9.2 kW) Z-axis feed X-axis feed Metric thread Witworth thread Module thread Diametric pitch thread Cross slide LxW 660 x 230 mm Cross slide stroke 340 mm Top slide LxW 350 x 150 mm Top slide stroke 150 mm Tailstock taper MK 5 Equipped with Three- and four-jaw chuck Multifix head with various inserts Chip tray Steady rest Technical specifications. Errors excepted. This machine comes from a company that exclusively processed plastic and is in excellent condition.

Condition: good (used), Year of construction: 2007, with UniRobot FMB Control: SIEMENS 828D Bed swing: Ø 540 mm Cross slide swing: Ø 360 mm Spindle – tailstock: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel: X = 210, Z = 610 mm Max. chuck size: Ø 254 mm Main spindle: 15/18 kW (100%, 60% duty cycle) Speed range: 60 – 4200 rpm continuously variable Max. torque: 192 Nm C-axis Rapid traverse: 1000 rpm TOOL TURRET 12 stations all driven Mounting: VDI 30 Speed range: 0-5000 rpm Max. drive power: 5 kW Max. torque: 20 Nm Automatic tailstock, hydraulic Cebvasv S Ekyepgqegt Travel: 500 mm Internal taper: MK 4 FMB MH5L-XP robot cell With Yaskawa Motoman MH 5 L robot Max. payload: 5 kg Max. working radius: 895 mm Weight: 27 kg Working range: S-axis (rotation): -170° ~ +170° L-axis (lower arm): -65° ~ +150° U-axis (upper arm): -138° ~ +255° R-axis (hand roller): -190° ~ +190° B-axis (joint/articulation): -135° ~ +135° T-axis (hand rotation): -360° ~ +360° With coolant system Chip conveyor, extraction system Total weight (machine/robotic): approx. 5300 kg

Condition: ready for operation (used), Year of construction: 2009, Sander It is used for sanding furniture panels, rough furniture workpieces, etc. Cgobvasvua Rmopgqet

Year of construction: 2022, Condition: ready for operation (used), Control Unit Brand SIEMENS Model sinumerik 840 D Cebvewbar Aeapgqegt Additional Equipment Complete cooling system. Central automatic lubrication. Books included for reference. This EMCO Concept Turn 105 was manufactured in 2022. A robust horizontal turning machine, it offers precision and reliability for various machining tasks. Ideal for those looking to enhance their turning capabilities. Contact us for more information. Application Types Turning

Condition: new, Year of construction: 2024, Special price: €45,000 (instead of €52,500) excl. VAT. Available immediately! Included Premium Features: - Heidenhain ND5023 3-Axis Position Readout - 5-Position Longitudinal Stop for the Saddle - SRW-Amestra Multifix C Quick-Change Toolholder with 4 Inserts - LED Workstation Lighting - Set of Spinelli Leveling Pads Cgsbvapgopq R Rdsqjt Standard Features: - Double Mechanical Clutch - Electromagnetic Brake - Rapid Traverses - Air Device on the Tailstock to Facilitate Movement Along the Bed - Cast Iron Bed, Legs, Headstock, Tailstock, and Slide - Bed Guides are Induction-Hardened and Ground - Headstock with Induction-Hardened and Ground Gears - Spindle Mounted on High-Precision Bearings - Friction-Free Slide Sliding - Electrical System in an Airtight Cabinet with Siemens and/or Schneider Components - Spindle Reduction Sleeve - 2 Dead Centers - Chuck Guard with Microswitch Turret Plexiglas guard, rear guard along the entire length of the machine, lead screw and feed rod guards, emergency stop button - Chip tank on wheels - Cooling system with electric pump - Central lubrication of the guideways with automatic pump - Follow and fixed steady rest - Service tools and wrenches, test certificate, electrical diagram, operation and maintenance manual - Machine built according to EC standards Optional equipment: - 3-/4-jaw chuck Technical specifications - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing without bridge: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speeds: 12 - Spindle speeds: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Modular threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametrical pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill stroke: 200 mm - Tailstock quill mount: MK5 - Total weight: 3200 kg

Condition: used, weight approx.: 450messurements (LxWxH): 1250x1350x1550y-travel: 300z-travel: 200x-travel: 350speed range: 80-2200table diamension: 600x200 Description:  -)coolant equipment -)machine lamp Cgebjrgvbpjvapgqjt Revs80 – 2200 (8) r.p.m.TaperDIN2078 ISO30 (Anzugsschraube M12)Working area300 x 200 x 350 mmTable600 x 200 mmFeeds stepless X,Y range20 – 200 mm/id traverse X,Y range1200 mm/ll travel45 mmMax. feed force1600 NmSpindle motor1,1/1,4 kWvertical table600 x 200 mmDistance vertical milling spindle - milling table20 – 370 mmDistance horizontal milling spindle - milling table84 – 434 mmFeed in X-axis (stepless)20 – 200 mm/minLength1250 mmWidth1350 mmHeight1550 mmWeight450 kg

Condition: good (used), Technical specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Hydraulic folding bearing Conical bending device Cgsbowchn Ujvapgqet Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several roller sets for pipe and profile rolling The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, cooling capacity: 605.5 kW (823.25 HP), type of cooling: air, total width: 2,250 mm, total length: 5,250 mm, total height: 2,450 mm, Cooling capacity: 605,5 kW (12/7 — 35°C) Year of manufacture: 2007 Options: with economizer, High Efficiency Cgebvevb Ahzjapgqst Heat exchanger: shell and tube Refrigerant circuit: 2 pcs. Compressors: 2 pcs. McQuay (screw) Type of refrigerant: R134a Number of fans: 10 pcs. Dimensions: 5.25 x 2.25 x 2.45 m Weight: 4 375 kg Working hours: 19303/19416 h Condition: excellent

Condition: good (used), Year of construction: 2009, Machine used only for plastic. thry spindle 95.mm Technical data shown on picture. 27.03.2025. With machine will come another spannpfutter with possibility 80 mm. Cjbvapeu Ibnqjgqsgt Parts shown by hand not come.

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Cgjbvaju Ibihepgqet Parts shown by hand not come.