Used Fordson Super Major for sale (4,504)

Condition: good (used), Up to 104 pieces available from closed factory. Selling per 8 pieces strapped to a pallet. Superb condition. From sous vide factory. Dcjleq Ih H Ejqxnyrog

Condition: used, Functionality: fully functional, Year of construction: 2022, operating hours: 519 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,010 mm, mast type: triplex, construction height: 2,240 mm, fork length: 1,200 mm, total length: 2,766 mm, drive type: Treibgas, construction width: 1,225 mm, LPG forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: Very good Front tires type: Superelastic Front tires Size: 28x9-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 6.50-10 Rear tires Condition: 60 - 80% Load protection grid, sideshift, Dslqxnyeimt Aherocg Sideshift suspended 3rd valve, 4th valve, rear working lights, front working lights, heating, load protection grille, full cab, Engine: Kubota WG2503 Stage V LED lighting

Year of construction: 2014, Condition: refurbished (used), Functionality: fully functional, Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the grinding chamber where the nozzles inject compressed gas at high pressure onto the fluidized bed full of feed material and the resulting jet projects the particles against each other breaking them thus reducing their side. The comminution takes place in the center of the chamber far from the mill housing, hence resulting in extreme low wear within the grinding chamber turning this mill optimal for abrasive materials or those that require very low contamination in the final product. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the grinding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier or cyclone-classifier. Thanks to the great required process air volume, very limited temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the compressed gas pressure, grinding nozzle diameter or its design and the classifier wheel speed, air volume, filling level and feeding rate, etc. Technical details Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert gas operation (N2) Stainless steel, with wear protection (ceramic and Vulkollan) Dcolqxner Dcizjyreg Scope of supply Hosokawa Alpine AFG 140 system comprising: dosing, butterfly valve, jet mill, filter, butterfly valve, blower, process gas distributor, controls and supporting structure. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: used, mileage: 1,096,400 km, power: 340 kW (462.27 HP), first registration: 09/2016, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, empty load weight: 8,477 kg, tire size: 315/70 R22,5, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, rear tire size: 315/70 R 22,5, number of seats: 2, number of beds: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, onboard computer, parking heater, sleeping cabin, spoiler, truck registration, | DAF XF 460 Super Space Cab, EURO6 | Automatic, Intarder, electric windows | Refrigerator, air conditioning, stationary climate control | Multifunction steering wheel, cruise control | Auxiliary heating, radio/CD, DTS | Differential lock | Lane departure warning, adaptive cruise control | Tires: front axle 385/55R22.5, rear axle 315/70R22.5. Errors, input and advance sales excepted. Dcelqjv Tz Scoxnyrog

Year of construction: 2002, Condition: excellent (used), Severn Science Argon Vacuum Welding chamber, new in 2002, previously used in F1 motor racing facility. With Edwards E2M 80 vacuum pump. Excellent condition, very rarely used. Dcjlqxnyjrwnrgsrjg

Condition: good (used), mileage: 832,853 km, power: 355 kW (482.67 HP), first registration: 05/2019, fuel type: diesel, color: green, axle configuration: 4x2, tire size: 385/65R22.5, fuel: diesel, wheelbase: 3,800 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, parking heater, sleeping cabin, soot filter, spoiler, = Additional Options and Accessories = - 2-DIN Radio - Adaptive Cruise Control - AEB - Aluminum Fuel Tank - Roof Spoiler - Differential Lock - EBS - Electric Windows - Low Noise - Speed Limiter - Intarder - Automatic Climate Control - Refrigerator - LED Lighting - Air Suspension - Fog Lights - Particulate Filter - Radio/CD Player - Disc Brakes - Sleeper Cab - Skylights - Sunshade - Lane Departure Warning - Auxiliary Heating - Auxiliary Climate Control - Toolbox - Xenon Lighting - Central Locking = Remarks = EURO 6, DAF 106 XF 480 4x2 STANDARD Tractor Unit Djlqxowh Avwsnyrecg SUPER SPACE CAB WITH SPOILER AND FENDER, SKYLIGHTS, AUTOMATIC TRANSMISSION, INTARDER, AUTOMATIC CLIMATE CONTROL, AUXILIA/AIR CONDITIONING, AUXILIA/AIR CONDITIONING, AUXILIA/AIR CONDITIONING, REFRIGERATED CARGO BAG, ADAPTIVE CRUISE CONTROL, LANE ASSISTANCE, AEB EMERGENCY BRAKE ASSISTANT, DAF 2-DIN RADIO WITH NAVIGATION, DIFFERENTIAL LOCK, 1X ALUMINUM DIESEL TANK (950L), STAINLESS STEEL STORAGE BOX, LED LIGHTS, FIRST-OWNER DUTCH TRACTOR WITH MOT UNTIL 05-2026 VIDEO: = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,902 cc Drivetrain AdBlue system: Yes Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Steered; Suspension: Leaf springs Rear axle: Tire size: 315/70R22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Suspension: Air suspension Dimensions Dimensions (L x W): 616 x 255 cm Weights Unladen weight: 8,047 kg Payload: 12,453 kg GVW: 20,500 kg Maintenance General technical inspection (AMO): inspected until May 2026 Condition Technical condition: good Visual condition: good Damage: none Identification License plate: 75-BNF-6 = Company information = Gast Trucks Venlo B.V. | Up to 30 pictures and one video on Since 1998, we have specialized in the purchase, sale, import, and export of used commercial vehicles. Location: Venlo (NL) | 10 km from the border | 70 km from Düsseldorf Airport | 55 km from Eindhoven Airport (NL). Transport and export documents/license plates available for an additional charge to ports in the Netherlands, Belgium, or Germany. Reservations without a deposit are not possible!

Condition: used, mileage: 1,039,000 km, power: 355 kW (482.67 HP), first registration: 04/2018, fuel type: diesel, axle configuration: 4x2, tire size: 385/65 R 22.5, fuel: diesel, wheelbase: 3,800 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, parking heater, sleeping cabin, spoiler, = Additional Options and Accessories = - 4x2 - AdBlue System - Aluminum Fuel Tank - Roof Spoiler - Digital Tachograph - Dual Fuel Tank - Electric Windows - Refrigerator - Air Suspension - Radio/CD Player - Sleeping Cabin - Sideskirts - Sunshade - Parking Air Conditioner - Central Locking = Additional Information = General Information Cab: SUPER SPACECAB License Plate: 32-BKR-1 Technical Information Dcslqxnewhlq Djyreg Number of Cylinders: 6 Engine Displacement: 12,902 cc AdBlue System: Yes Front Axle: Tire Size: 385/65 R 22.5; Steered; Left Tire Profile: 90%; Right Tire Profile: 90%; Suspension: Leaf Spring Rear Axle: Tire Size: 315/70 R 22.5; Twin Tires; Tire tread inside left: 40%; Tire tread outside left: 40%; Tire tread inside right: 40%; Tire tread outside right: 40%; Reduction: single reduction; Suspension: air suspension Dimensions Dimensions (L x W): 616 x 255 cm Weight Curb weight: 8,598 kg Payload: 11,902 kg GVW: 20,500 kg Condition Damage: none

Condition: used, Functionality: fully functional, Year of construction: 2023, load capacity: 10,000 kg, lifting height: 3,600 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,445 mm, fork carriage width: 2,000 mm, fork length: 2,000 mm, total length: 4,980 mm, drive type: Elektro, construction width: 2,116 mm, net weight: 16,400 kg, Electric 4-wheel forklift Load center: 600 Fork width: 170 mm Fork thickness: 90 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Technical condition: New Front tires type: Superelastic Front tires Size: 8.25-15 Dolqstpk D Aexnyrecg Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 250-15 Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 1084Ah Battery manufacturer: Eneroc New Energy Battery year of construction: 2021 Battery condition: 80 - 100% Sideshift, fork positioner, Fork positioner with sideshift integrated Adjustment range fork tines (outer/outer) 420-2060mm sideshift +/- 150mm 3rd valve, 4th valve, rear work lights, front work lights, roof cover, windshield, heating, full cab, full free lift, CE certificate, OPS comfort seat with belt LED lighting system incl. rotating beacon Special paint finish RAL 1028

Year of construction: 2023, Condition: like new (used), Functionality: fully functional, A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 • Alpine Dry Agitated Media Classifier Mill Pulvis 150 PV • Alpine Aeroplex Spiral Jet Mill 100 AS Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant Dslqxnsr Iig Seyrjcg • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel and wear protection - non product contacting parts: stainless steel, plastic (PE-HM) Wear protection: ceramic and Vulkollan (Polyurethane) Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in wear protected design. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP, 50 ZPS, 100 AS and 150 PV

Condition: used, Functionality: fully functional, Year of construction: 2023, operating hours: 371 h, load capacity: 8,000 kg, lifting height: 4,620 mm, free lift: 1,490 mm, fuel type: diesel, mast type: triplex, construction height: 2,840 mm, fork carriage width: 2,375 mm, fork length: 2,500 mm, total length: 4,150 mm, drive type: Diesel, construction width: 2,200 mm, net weight: 13,300 kg, Diesel forklift Load center: 600 Fork width: 180 mm Fork thickness: 75 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 8.25-15 Rear tires Type: Superelastic Rear tires Size: 8.25-15 Description: In addition to this Clark model, we also have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this C80D900 P.S.: Our forklift master workshop is specialized in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Dcolqxnysu Dyw Nersg Sideshift, fork positioner, Load capacity with attachment rate: 8000 kg / LSP: 600 mm, fork positioner opening ranges: 440 mm / 2025 mm Rear work lights, front work lights, heating, full cab, CE certificate, Diesel engine: Kubota V3800-CR-TE5B (3.8L) with diesel oxidation catalytic converter (DOC) with diesel particulate filter (DPF) (stage 5), reversing camera, radio MP#-CD player, reversing light, audible reversing alarm,

Condition: used, mileage: 382,000 km, power: 330 kW (448.67 HP), first registration: 02/2020, overall weight: 19,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, parking heater, soot filter, Information in German * 27 MC / CB * Aluminum fuel tank * Power brakes * Roof spoiler * Electric windows * Electrically adjustable exterior mirrors * Homepage * Air conditioning * Refrigerator * Air suspension * Fog lights * Parabolic suspension * Particulate filter * Radio/CD player * SemCollection * SemStars * Spoiler * Auxiliary heating * Toolbox * Xenon lighting * Power take-off (PTO) * Central lubrication * Central locking MERCEDES BENZ ACTROS 1945 382,000 KM PTO TOP CONDITION BELGIUM TRUCK First registration: APK: - 25 Mileage: 382,000 km Chassis number: WDF9634031C006468 Engine power: 330 kW (449 HP) 12,809 cm3 Transmission: automatic Wheelbase: 370 cm Own weight: 7,964 kg GVW: 19,000 kg Cab Color: White Suspension: Front parabolic and rear air suspension. Emission class: EURO 6 Configuration: 6X2 Tires axle 1: 315/70 L50% R50% Tires axle 2: 315/70 L50% R50% Cabin type: Extra?s: Air conditioning with climate control, Parking heater, 2 beds, Refrigerator, PTO, Tipper hydraulics with oil cooler, Many extra lights, Truck has just new service (engine oil and all filters), New belts, Engine valves adjested, New NOX sensor, New air balloons, New brackets, Full Service history at Mercedes Benz, Directly available and ready for immediate delivery, Etc, etc. SUPER CONDITION MB ACTROS 1945 DIRECTLY AVAILABLE AND READY FOR IMMEDIATE DELIVERY General information Cabin: Sleeping cabin License plate: BB-688-G Gearbox Gearbox: Automatic transmission Axle configuration Tire size: 315/70 R22.5 Brakes: Disc brakes Front axle: Max. axle load: 8000 kg, left tire profile: 50%, right tire profile: 50% Rear axle: Dual tires, differential lock, Max. axle load: 11500 kg, left tire profile inside: 50%, left tire profile outside: 50%, right tire profile inside: 50%, right tire profile outside: 50%, reduction: single reduction Dimensions and weights Payload: 11,136 kg Dimensions (L x W x H): 616 x 250 x 394 cm Wheelbase: 370 cm Condition General condition: very good Technical condition: very good Visual condition: very good----Information in Dutch * Air conditioning * Aluminum fuel tank * Centrale deurvergrendeling * Central smering * Dakspoiler * Electrically operated ramen * Electrically adjustable side mirrors * Gereedschapbox * Home page * Koelkast * Air reduction * Crap lamps * Paraboolvering *PTO * Radio/CD player * Red filter * SemCollection * SemStars * Spoilers * Stand tile * Reinforced motor brake * Xenon lighting * Zendapparatuur / 27MC MERCEDES BENZ ACTROS 1945 382,000 KM PTO TOP CONDITIN BELGIUM TRUCK First registration: APK:- 25 Mileage: 382,000 km Chassis number: WDF9634031C006468 Djlqxnowhh E Reyrscg Engine power: 330 kW (449 HP) 12,809 cm3 Transmission: automatic Wheelbase: 370 cm Own weight: 7,964 kg GVW: 19,000 kg Cab Color: White Suspension: Front parabolic and rear air suspension. Emission class: EURO 6 Configuration: 6X2 Tires axle 1: 315/70 L50% R50% Tires axle 2: 315/70 L50% R50% Cabin type: Extra?s: Air conditioning with climate control, Parking heater, 2 beds, Refrigerator, PTO, Tipper hydraulics with oil cooler, Many extra lights, Truck has had just new service (engine oil and all filters), New belts, Engine valves adjested, New NOX sensor, New air balloons, New brackets, Full Service history at Mercedes Benz,

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 2,716 h, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,490 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Condition: Reconditioned without warranty Technical Condition: Very good Front Tires Type: Super Elastic Front Tires Condition: 80 - 100% Rear Tires Type: Super Elastic Rear Tires Condition: 80 - 100% Battery Voltage: 48V Battery Ah: 625Ah Dolswh Dh Ieqxnyrocg Battery Type: PzS Battery Year of Manufacture: 2019 Description: Overhauled, serviced, and tested according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, STVZO (German Road Traffic Licensing Regulations), safety light, - BRAND NEW battery available for an additional charge

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, Now we can offer a top-of-the-line sorting plant from SGA Conveyor. The system has been used as a demo, so it has never been in active use(!). With this pusher sorter, a highly efficient solution is offered for mainly distribution or e-commerce, with the capacity to handle up to an impressive 4,000 parcels per hour. This facility is designed to meet the needs of businesses that require a really fast and reliable sortation with many sorting possibilities. The system has 64 different directions for sorting, which provides great flexibility and allows easy integration into different sorting flows. See drawing/layout under "Downloadable documents" The system is compatible with a wide range of parcel sizes and types, from small bags to larger cartons. The minimum size of the packages is 150x150x20 mm, while the largest ones can be up to 600x500x500 mm. The system can handle packages weighing up to 25 kg, making it suitable for a wide range of products. The sorting facility is equipped with a state-of-the-art Datalogic camera that reads both barcodes and QR codes for accurate identification of parcels. The sorting facility is also equipped with a volume measuring system from Datalogic that measures length, width and height, ensuring correct sorting based on these dimensions. The sorting lanes are 4,000 mm long with a width of 900 mm, providing ample space for unloading sorted parcels. The total length of the system is approximately 80 meters, but it can be installed in several rounds, which means it can be adapted to existing premises or to an expanding business area. Dcjlqsth Ukkexnyrog The system is CE marked, but additional safety netting is recommended if the system is not placed against a wall to avoid operators coming into contact with the pushers. Installation typically takes around 3 weeks, and SGA service engineers will work closely with you to ensure a smooth installation. The sorting facility can easily be integrated with a superordinate system. In addition, there is the possibility to manage sorting logic directly in the control cabinet/HMI. The system comes with an Atlas Copco screw compressor, known for its quiet operation and efficiency. If you are looking for a powerful sorting system with high capacity, flexibility and adaptability, then this is for you. New price is around 5 million SEK. For more information or to discuss customization and installation, do not hesitate to contact us. We cooperate with the manufacturer and look forward to helping you optimize your sorting process and develop your business with a reliable and efficient solution.

Condition: used, Functionality: fully functional, Year of construction: 2022, operating hours: 125 h, load capacity: 10,000 kg, lifting height: 4,500 mm, free lift: 1,450 mm, fuel type: diesel, mast type: triplex, construction height: 2,870 mm, fork carriage width: 2,400 mm, fork length: 2,400 mm, drive type: Diesel, construction width: 2,165 mm, net weight: 15,400 kg, Diesel forklift Load center: 600 Fork width: 170 mm Fork thickness: 89 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Technical condition: Very good Front tires type: Superelastic Front tires Size: 9.00-20 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Djlqxnyji Hhb Nerjcg Rear tires Size: 9.00-20 Rear tires Condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, roof cover, windshield, heating, full cab, full free lift, CE certificate, twin tires, safety light,

Year of construction: 2022, Condition: as good as new (ex-display), Rental system A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in Pharma design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for R&D and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 Dcslji Hbrzjqxnyrjg • Alpine Zirkoplex Classifier Mill ZPS 50 Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside Zone 22 Material of construction - product contacting parts: stainless steel - non product contacting parts: stainless steel Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in Pharma design. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors. Can be fitted with the following modules: 100 AFG, 50 ATP and 50 ZPS

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 9,060 h, load capacity: 4,000 kg, lifting height: 4,000 mm, free lift: 110 mm, mast type: standard, construction height: 2,740 mm, fork length: 1,500 mm, total length: 3,000 mm, drive type: Treibgas, construction width: 1,350 mm, net weight: 5,890 kg, LPG Forklift Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Standard Technical Condition: Normal Front Tires Type: Super Elastic Front Tires Condition: 80 - 100% Rear Tires Type: Super Elastic Rear Tires Condition: 80 - 100% Dolqxnjwdz Iksyrocg Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Rear Work Lights, Front Work Lights, Roof Cover, Windshield, Heating, Full Cab

Condition: used, mileage: 169,900 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, overall weight: 5,000 kg, first registration: 07/2016, loading space length: 4,800 mm, loading space width: 2,140 mm, loading space height: 2,300 mm, loading space volume: 23 m³, emission class: euro5, color: white, number of seats: 2, Equipment: ABS, central locking, soot filter, tail-lift, Special equipment: Start-off aid (hill start assist), Audio 15 audio system (radio with color display), roof control unit with reading spot on driver/passenger side, digital tachograph, downloadable, 180 A generator, additional master key, spare wheel with super single tires (235/65 R16), spare wheel holder under the end of the frame including jack, acoustic reversing alarm (warning signal outside), inside rear-view mirror, seats in the driver's cab: comfort suspension seat, driver's side, reinforced rear stabilizer, reinforced front stabilizer, 95 Ah fleece battery, heat-insulating glazing (windscreen with band filter at the top) Other equipment: Adaptive brake light, airbag on driver's side, washer fluid level indicator, electric outside mirror. adjustable and heated, both, outside mirrors with integrated indicator light, battery 74 Ah, brake assistant, braking system with ABS + ASR, roof paneling in the driver's cab, driving assistance system: lane departure warning, lockable glove compartment, body / structure: box lbw, fuel tank: main tank 75 litres, headlight range control, truck registration, model update, engine 2.1 litres - 120 kW CDI KAT, wheelbase 4325 mm, smoker's package, tires 285/65 R16C super single tires on the rear axle, low emissions according to the Euro 5 emissions standard, seat belt system with warning system (driver's side), seat cover / upholstery: Lima fabric, seats in the driver's cab: adjustable passenger seat, maintenance interval display Assyst, permissible. Total weight 5.00 t, twin tires on 2nd axle / rear axle Dhollandia tail lift 750 KG Loading space: L 4.80 W 2.15 H 2.30 meters Payload: 1600 KG Dcoljvt H Icoqxnyrog The vehicle is in good condition

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: H2X387J02622, Year of construction: 2018, operating hours: 9,836 h, load capacity: 2,500 kg, lifting height: 4,265 mm, free lift: 1,850 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,730 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 100 %, empty load weight: 5,165 kg, Equipment: cabin, lighting, sideshift, Linde E25H-01-600 4-wheel electric forklift, year of manufacture 2018 with a Duplex mast Details: Linde E25H-01-600 Year of manufacture: 2018 Work hours (h): 9836 Mast type: Standard Lift height (mm): 4265 Freelift (mm): 1850 Build height (mm): 2730 Attachments: Sideshift Lift capacity (kg): 2500 Fork length (mm): 1200 Weight (kg): 5165 Additional hydraulic vehicle: AH2 Dolqsu Tt Svsxnyrscg Additional hydraulic mast: AH2 Front wheels: Superelastic NEW Rear wheels: Superelastic NEW Battery YOM: 2019 Battery capacity (Ah): 620 Battery voltage (V): 80 Accessories: Partial cabin (windscreen & roof). Front & rear spot lights. Front wiper. Comments: Full freelift.

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, cutting capacity: 510 mm, Nice big saw that cuts 0/60 degrees. Super fine automatic saw with mist lubrication Dcelqxnyewhd H Dorog

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 4,156 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,451 mm, fuel type: diesel, mast type: triplex, construction height: 2,238 mm, fork length: 1,400 mm, drive type: Diesel, net weight: 6,000 kg, Diesel forklift Dslqetu Rqnexnyrjcg Load center: 600 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: good Rear tires Type: Superelastic Rear tires Size: 23x9-10 Rear tires Condition: 60 - 80% 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, full free lift, CE certificate,

Year of construction: 2024, Condition: new, Functionality: fully functional, Rental Multiprocess System in stainless steel. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel - non product contacting parts: stainless steel Wear protection: none Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in stainless steel. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP and 50 ZPS. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Delougfn Asqxnyrjcg Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: used, Functionality: fully functional, machine/vehicle number: FN389299, Year of construction: 2008, operating hours: 10,212 h, load capacity: 1,600 kg, lifting height: 4,500 mm, fuel type: electric, mast type: triplex, construction height: 2,020 mm, fork carriage width: 1,000 mm, drive type: Elektro, Electric 3-Wheel Forklift VIN: FN389299 Load Center: 500 Mast Type: Triplex Condition: Ready for use and fully functional Dcjljwhtw Eeqxnyreg Technical Condition: Good Front Tires Type: Superelastic Rear Tires Type: Superelastic Battery Voltage: 48V Sideshift, 3rd Valve, 3-Wheel

Condition: used, Functionality: fully functional, Year of construction: 2022, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,300 mm, fuel type: electric, mast type: triplex, construction height: 2,242 mm, fork length: 1,150 mm, total length: 2,098 mm, drive type: Elektro, construction width: 1,120 mm, net weight: 3,800 kg, Electric 4-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: New Front tires type: Superelastic Front tires Size: 200/50-10 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 16x6-8 Rear tires Condition: 80 - 100% Battery Volt: 48V Battery Ah: 750Ah Battery year of construction: 2024 Battery condition: 80 - 100% Load protection grille, Sideshift, 3rd valve, rear working lights, front working lights, roof cover, windshield, half-cab, load protection grille, full free lift, Dcolei Avkyeqxnyrog PVC side tarpaulin

Year of construction: 2000, Condition: refurbished (used), Functionality: fully functional, Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. Dcolqxnyor Dcitjrog The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the grinding chamber where the nozzles inject compressed gas at high pressure onto the fluidized bed full of feed material and the resulting jet projects the particles against each other breaking them thus reducing their side. The comminution takes place in the center of the chamber far from the mill housing, hence resulting in extreme low wear within the grinding chamber turning this mill optimal for abrasive materials or those that require very low contamination in the final product. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the grinding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier or cyclone-classifier. Thanks to the great required process air volume, very limited temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the compressed gas pressure, grinding nozzle diameter or its design and the classifier wheel speed, air volume, filling level and feeding rate, etc. Technical details Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert gas operation (N2) Made of mild steel, with wear protection (ceramic and Vulkollan) Scope of supply Hosokawa Alpine AFG 140 system comprising: dosing, jet mill, filter, butterfly valve, blower, process gas distributor, controls and supporting structure. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: used, Functionality: fully functional, machine/vehicle number: H2X393H01241, Year of construction: 2017, operating hours: 15,313 h, load capacity: 3,500 kg, lifting height: 5,100 mm, fuel type: diesel, mast type: triplex, construction height: 2,300 mm, fork carriage width: 1,150 mm, drive type: Diesel, Diesel Forklift VIN: H2X393H01241 Load Center: 500 Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Super Elastic Rear Tires Type: Super Elastic Dcolqxnswhtwxoyrsg Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Windshield, Heater, Full Cab, Interior Mirror, Windshield Wiper