Used Fordson Power Major for sale (41,814)

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 63134, Herford engine with generator Crebov Sa Ndo Hl Ewdsb 4H280, 320 hp 428 rpm is still installed and must be removed by the customer.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator. It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor, which is arranged in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally. The medium-load drive is arranged in the lower part of the machine and applies the static preload with the help of a gear motor via a spindle drive. The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam. The test bench is controlled by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical data: General data test bench: Total height of test bench 1840 to 2240 mm Height of machine table 1030 mm Width of test bench 800 mm Depth of test bench 1500 mm Height of sample chamber max. 600 mm (without force transducer) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum vibration path ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of test bench approx. 1880 kg Max. weight of clamping device 150 kg General data Control cabinet: Total height of control cabinet 1900 mm Height of table top 1080 mm Width of control cabinet 650 mm Depth of control cabinet 700 mm Weight of control cabinet 152 kg Ceb Hovx Su Sjl Ewderb Color RAI 9006 (white aluminum), table top midnight Conditions for the installation location: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load capacity 170 N/cm² Power supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, 2-pole, 16 A Fuse 16 A Connection and ambient conditions Mains conditions: Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-term dips < 20 ms Limits for continuous interference Radio interference level A according to VDE0871 Frequency 50 Ηz ± 1% Protective earth Earthing resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Functionality: fully functional, overall weight: 800 kg, chuck outer diameter: 800 mm, mount diameter: 520 mm, bolt circle diameter: 436 mm, cone mount: 286 mm, Item 1.0) 6-Jaw Power Chuck - Creb Hoq N A Ngsl Ewdeb Manufacturer: SMW-Autoblock ø 800HL-6GR Incl. flange: SMW Autoblock: 241261 FF2 Chuck diameter ø 800mm Threaded connection for drawbar: upon request Incl. top jaws with serration: Weight: approx. 500kg Good condition, price upon request ----- Item 1.1) Flange available Mounting diameter: 520 mm Locking ring: 436.6mm; M24 Taper: KK 15: 285.78mm Width: approx. 40mm Weight: approx. 60kg _____ SMW-800HL Description Suitable for clamping thin-walled workpieces. Suitable for horizontal CNC lathes. Adjustable to 6 jaws STANDARD EQUIPMENT Chuck with mounting screws, including a set of top jaws Low-maintenance sealed design (Proofline series chucks). 6-Jaw Power Chuck _____ Item 2) 3-Jaw Power Chuck ø 800 mm Manufacturer: FORKARDT: Jaw interface: serration Size: to be supplied later Threaded connection for draw tube: upon request Spindle adapter flange for machine: upon request Price including shipping: upon request

Condition: new, Number of wheels(pcs)-4 Wheels diameter-120 mm Crob Hedmk Ekjl Ewdsb Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse

Condition: good (used), pneumatic power chuck Make Forkardt Type UVE 200 - 50 - J5 Cjbjdm Htpj Hl Ewdorb KKG 5 Bolt circle diameter 105 mm cone 80 mm G flat. diameter 280 mm diameter hollow spindle 50 mm G flat. Height with jaws 200 mm Weight 47,5 kg

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Cobsdz Srbs Hl Ewdorb Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each Ceb Hl Eeu Nxatewdsrb - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, intermediate storage tank + fuel depot tanks 4,8 m³ *

Condition: used, Year of construction: 2021, Functionality: fully functional, type of input current: AC, working range: 220 mm, input voltage: 400 V, total width: 1,000 mm, total length: 17,000 mm, sheet thickness (max.): 20 mm, material thickness: 20 mm, travel distance X-axis: 6,000 mm, Plasma cutting system for pipes and profiles: Machines for plasma cutting pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily accessed via the 12" touch display. After manually inserting the workpiece, the automatic cutting process begins. Pipe length: max. 6000 mm for round pipes up to max. OD = 220 mm for square pipes up to max. 150 x 150 mm (6 x 6") Maximum pipe weight: 250 kg Servo drive X-feed A-axis rotation Servo drive Y- and Z-axis All motors with absolute encoder 4-jaw chuck 200 mm Side loading possible, protected by a light curtain Fully automatic cutting process Industrial PC control with 12" touch display Data import via USB and LAN Machine power consumption: 400 V 3P 4 kW Dimensions: 750 x 120 x 180 cm Weight: approx. 800 kg Made in Germany The plasma power source is a This is a multi-gas FeinCut system: Kjellberg HiFocus 80i with PerCut 160-2 machine torch Including extraction system, PC, and accessories Cjb Hl Ewsv Rxd Rjdjrb Year of manufacture 2021 Available from mid-April. Price negotiable

Condition: used, Year of construction: 2005, Hydr.3-jaw power chuck FORKARDT Type:3KS630 built approx.2005 Diameter.630mm Pulling rod winning M30 With 1Parr hard jaws Cjb Hl Eochfr Nowdjrb Fmax 13000daN Max speed 1200rpm Good condition.

Condition: new, Type V-380 Crsb Hsdg Ucuol Ewdsb Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse

Year of construction: 2005, Condition: good (used), Schrack 300 kvar Reactive power compensation equipment Manufacturer: Schrack Energietechnik Type: KRSMO-P-TS-25/12 Fi 7% Nominal power: 300 kvar Cjb Hl Eek D Dxbewdorb Rated voltage: 400 V Nominal frequency: 50 Hz Rated current: 432 A Reactive power control relay: Frako RM9612 Rittal electrical switch cabinet: Freestanding with built-in fan. Manufacturer: Rittal Type: TS8806 Dimensions: 610x830x2000 mm

Year of construction: 2023, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: SNO: 2538870002, All information and content are provided without guarantee. Errors and changes excepted. We reserve the right to change, update, revise, or delete data at any time. Sale exclusively to commercial customers. Creb Hlsv N Hbhj Ewdob Other devices are also available!

Condition: used, Year of construction: 1980, width 33 mm bolt-diameter 60 mm Crjb Hlevu Hkms Ewdob

Condition: good (used), Power converter, power supply, power pack, switching power supply, power supply -Manufacturer: Siemens, power supply Sitop Power 20 -Type: 6EP1436-3BA00 -Number: 5x available Cjb Hl Eocc Enmowdjrb -Price per piece -Dimensions: 160/125/H125 mm -Weight: 2.1kg/pcs

Year of construction: 2010, Condition: good (used), Power chucks for vertical and horizontal CNC lathes Manufacturer: SCHUNK Type: ROTA NCO260 year 2010 diameter 260 mm with intermediate flange diameter 220 mm spindle nose in flange DIN 55028 / A6 Thread in tie rod M24 N max: 4500 rpm In good condition. 2.pieces available Price is for 1.piece. Crjbeikzy Dj Hl Ewdsb

Condition: excellent (used), Functionality: fully functional, power: 3 kW (4.08 HP), Boilers and central heating Cob Hlot Ngfis Ewderb

Condition: good (used), Functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, nominal voltage: 400 V, total width: 600 mm, total length: 820 mm, total height: 1,600 mm, Used Liebert NX 40kVA / 32kW 3-phase UPS battery backup system (tested and includes good batteries) Rated power: 0.8 PF: 40 kVA Output power 32KW Battery Battery type VRLA 40x YUASA NPL24-12 I 12V 24 AH Width mm 600 Depth mm 825 Height mm 1600 Weight (approx.) without battery kg 341 Input Parameters Rectifier Type IGBT-based Vector Controlled PFC (PF Corrected) Input Voltage to Rectifier Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 3-w Input Voltage to Bypass Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Permissible Input Voltage Range for Rectifier Vac 305 to 477 Input Frequency Hz 50 or 60 Permissible Input Frequency Range for Rectifier Hz 40 to 70 Input Current THD at nominal voltage % < 3* without any Filter Input Power Factor at nominal voltage ≥ 0.99* without any Filter Flexi Power Walk-In seconds 5 to 30 (selectable) Output Parameters Inverter Type IGBT-based Vector, Repetitive & PI Controlled Output Power kW 24 32 48 64 Output Voltage Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Output Voltage Regulation % +/- 0.5 (3-phase RMS average) Cjb Hl Est H Irlswdjrb Output Frequency Hz 50 or 60 Output Frequency Regulation % +/- 0.05 Output Voltage THD at nominal voltage % 1% (max) Capability to handle High Crest Factor Load 3 : 1 (compliant with IEC 62040-3) Capability to handle Step Load 0-100 or 100-0 Transient Recovery mseconds < 0.5 (recovery to 95% of the voltage level) 10 (recovery to 99% of the voltage level)

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Semi-automatic glass cutting machine with mechanical measuring device. Crjb Hl Estqlpnswdsb

Condition: excellent (used), mileage: 690,592 km, first registration: 04/1993, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel, loading space width: 2,500 mm, loading space length: 5,800 mm, Year of construction: 1993, Equipment: crane, sleeping cabin, = Other options and accessories = - Power take-off (PTO) = More information = Technical information Number of cylinders: 6 Axle configuration Suspension: Leaf spring Front axle: Steered Rear axle: Twin tires; Reduction: Outer planetary axles Dimensions Dimensions (L x W x H): 940 x 250 x 344 cm Weights Empty weight: 14,200 kg Payload: 5,250 kg GVW: 19,450 kg Functional Crane: DIEBOLT D18 81, built in 1994, behind the cabin Condition Technical condition: very good Cob Hl Ewevl Itkedsrb Visual condition: very good More information Contact Thierry Leemans for more information.

Condition: like new (used), Functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver with shut off clutch with trigger start Output: Hex 1/4" Torque: 2.0 to 5.5 Nm / 18 - 49 in.lb Idle speed: 1470 min-1 Length: 200 mm Weight: 1.0 kg Other tools for industrial production and maintenance on request. Crobev Im Nce Hl Ewdjb

Year of construction: 2005, Condition: good (used), Wooden power chuck Fabr.FORKARDT Type:3QLC/K250-72-Z8-S12-172005 Bore in chuck 72mm with clamping cylinder complete Year 2005 in good condition. Creb Hsgqxg Hel Ewdeb

Condition: good (used), power resistor, wire potentiometer, resistor Csbjb A Svrs Hl Ewderb -Price: per piece -Number: 7x available -Weight: 0.2 kg

Condition: excellent (used), Power Supply Manufacturer: Siemens Crjb Hjf Ddb Ssl Ewdsb Typ: SITOP PSU200M 6EP1334-3BA10 Input: AC 120-230V, 4,4-2,4A, 50-60Hz AC 230-400-500V, 2,4-1,3-1,1A, 50-60Hz Output: DC 24V, 10A YSU/J8

Year of construction: 2003, Condition: ready for operation (used), A total of seven similar Walter CNC tool grinding machines are available. Travel X/Y/Z: 460mm/320mm/660mm, axes: 5, rotary table swivel range: +/-200°, workpiece diameter: 320mm, workpiece length: 350mm, workpiece weight: 50kg. Spindle speed: 7000rpm, spindle diameter: 80mm, max. grinding wheel diameter: 200mm. Machine dimensions X/Y/Z: approx. 2500mm/3000mm/2300mm, weight: approx. 4200kg, control: Walter HMC 600 CNC. Documentation available. On-site inspection is possible. Individual sale possible. Creb Hl Ewsv H Df Esdjb

Year of construction: 2010, Condition: good (used), Power chucks for vertical and horizontal CNC lathes Creb Hl Ejikzzpewdsb Make:RÖHM Type:KFD 400 Tie rod M24 Nmax:2000 rpm Good condition .