Used Glob-Ram Rm180 for sale (3,576)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame Hfedpfx Aey R Nnfohgeh • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Hodpfx Ahewpud Aegsfh Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width 2200 mm Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.

Condition: used, mileage: 749,867 km, power: 338 kW (459.55 HP), first registration: 02/2016, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: air conditioning, electric window regulation, Tyre size: 315/80R22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Empty weight: 7.472 kg Carrying capacity: 11.528 kg GVW: 19.000 kg = Additional options and accessories = - PTO - Tipper hydraulics Hfodoy Uw Hdepfx Ahgoh

Condition: used, mileage: 707,105 km, power: 338 kW (459.55 HP), first registration: 01/2017, fuel type: diesel, tire size: 315/80r22,5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: air conditioning, electric window regulation, Tyre size: 315/80r22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 6 Empty weight: 7.465 kg Carrying capacity: 11.535 kg GVW: 19.000 kg Make of engine: Volvo = Additional options and accessories = Hodpfsy Uw E Tex Ahgjfh - PTO - Tipper hydraulics

Condition: used, functionality: fully functional, mileage: 90,000 km, power: 183.87 kW (249.99 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, first registration: 06/2021, emission class: euro6, color: black, number of seats: 5, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, all-season tires, central locking, cruise control, fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, trailer coupling, RAM 1500 New Model Gen.5 Night Edition Blackout Package New bed cover New running boards New all-weather tires Heated seats Heated steering wheel Large display Apple CarPlay Tow hitch (AHK) Full German registration Not 4x4, but still excellent traction thanks to all-weather offroad tires Repaired accident damage – sheet metal and front suspension were repaired and repainted by us. Hodpfjx Eizgsx Ahgofh Top condition!!! Single owner Serious purchase inquiries only, please! The truck comes with too many extras to list – for more details, feel free to contact us via email or phone. – Price includes German registration documents. – Subject to errors and prior sale. – Financing and trade-in possible, all offers welcome. – Tipping hydraulics available for an extra charge!!! Our motorhomes are customs-cleared and taxed in Germany, including EU vehicle registration documents. With us, quality is guaranteed—you have our word. Didn’t find your dream vehicle in Europe’s largest US truck inventory? Didn’t see your company’s or favorite color? No problem… We have over 500 additional trucks and motorhomes—new and used—of all brands in the USA and Canada. We also work with one of the best paint shops in Germany. Let us advise you and provide a free quote. We look forward to your call. Viewing appointments are by appointment only.

Condition: used, Year of construction: 1983, spindle diameter 160 mm Hjdsy Suiwopfx Ahgsfh x-travel 9500 mm y-travel 4000 mm z-travel 1000 mm w-travel 700 mm spindle speed: 2,5-1000 U/min control Siemens 840 D power capacity 28 kW spindle taper ISO 50 dimension of the ram 340x340 mm Feed 5000 mm/min rapid traverse 5 m/min The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2012, condition: refurbished (used), Fresh concrete recycling plant BIBKO RAM 20/ used manufactory: Bibko type: RAM 20 YOM: 2012 Capacity: ca. 12 m³/h system washing trough, trough length 2500 mm separating layer 0,25 mm with discharge conveyor screw (new) overhauled/reconditioned and exactly aligned - gear reconditioned (overhauled) and sealed - all bearings are new - buckets and scraper exactly aligned Hfedpedvuursfx Ahgeh Optional by surcharge: - 1 pcs feed hopper / used - 1 pcs agitator (wastewater) with console / used - 1 pcs control unit / used -for the full automatic control of the complete plant - 1 pcs gallows-shaped pipe/ used Facility is fully equipped, clean and primed. The final painting according to customer's request. location: South Germany offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale _____ IT IS FORBIDDEN TO COPY OR PUBLICATE THIS OFFER BY ANY THIRD PARTIE OR THIRD PERSON.

Condition: used, Year of construction: 1988, spindle diameter 130 mm x-travel 10000 mm y-travel 3500 mm z-travel 1000 mm Control Heidenhain type TNC 155 workpiece weight 300 t turning speeds 1620 U/min spindle taper ISO 50 One direction thrust bearing 2 Angle head 2 power capacity 76 kW Plate area 12000x9600 mm Thickness 450 mm Plate area 109 m² The floor plate is optional and will be charged extra The tech. Data are manufacturer or operator information and therefore non- Hfjdpfx Aeyt Rygehgsh binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, mileage: 882,005 km, power: 338 kW (459.55 HP), first registration: 04/2016, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: air conditioning, electric window regulation, Tyre size: 315/80R22.5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 6 Hfodpfjyx Utpjx Ahgjh GVW: 19.000 kg Make of engine: Volvo

Condition: used, mileage: 665,997 km, power: 338 kW (459.55 HP), first registration: 03/2016, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: air conditioning, electric window regulation, Tyre size: 315/80R22.5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 6 Empty weight: 7.482 kg Carrying capacity: 11.518 kg GVW: 19.000 kg Make of engine: Volvo = Additional options and accessories = - PTO Hfsdpfxjxxxxaj Ahgsh - Tipper hydraulics

Condition: used, mileage: 717,653 km, power: 338 kW (459.55 HP), first registration: 03/2017, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: air conditioning, electric window regulation, Tyre size: 315/80R22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Empty weight: 7.470 kg Carrying capacity: 11.530 kg Hsdpfjxp Nc Djx Ahgjfh GVW: 19.000 kg = Additional options and accessories = - PTO - Tipper hydraulics

Condition: used, mileage: 704,235 km, power: 338 kW (459.55 HP), first registration: 02/2016, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: air conditioning, electric window regulation, Tyre size: 315/80R22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Empty weight: 7.472 kg Carrying capacity: 11.528 kg GVW: 19.000 kg = Additional options and accessories = - PTO - Tipper hydraulics Hedoxp Ncwepfx Ahgjfh

Condition: used, spindle diameter 140 mm x-travel 6000 mm y-travel 2400 mm w-axis . mm ram: horizontal adjustment . mm ram: diameter 300 mm spindle taper ISO 50 turning speeds 3,15-800 U/min rotary table: 2250x2250 mm Hedpeywcmbofx Ahgefh table travel longitudinal 1600 mm rotary table: 2250x2250 mm table travel longitudinal 1600 mm Optional worktop Optional: 2 Collet boring tables The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1977, spindle diameter 150 mm x-travel 4200 mm y-travel 3000 mm dimension of the ram 380x380 mm ram: horizontal adjustment 500 mm spindle travel 1200 mm Radial face slide diameter 780 mm radial face slide travel 250 mm rotary table: Defum type S-1600 Table dimensions 1500x1500 mm table travel 1100 mm Serial no .: 6749, optional: floor plaates (Plattenfeld) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Hodpeyuttxjfx Ahgefh

Condition: used, Year of construction: 1982, spindle diameter 150 mm x-travel 3.000 mm y-travel 2.000 mm spindle stroke 700 mm ram: horizontal adjustment 700 mm dimension of the ram 340 x 340 mm Hsdjyw Th Aspfx Ahgefh spindle taper ISO 50 spindle turning speed range 2 - 2.500 U/min feed 5000 mm/min rapid traverse 10 m/min table surface area 2.500 x 2.000 mm table load capacity 25.000 KG B - axis 360 ° total power requirement 100 kW weight of the machine ca. 38,5 t dimensions of the machine ca. 8,40 x 6,80 x 5,90 m Retrofit in 2004

Condition: good (used), PLC control, central assembly, RAM, CPU, central device, central processing unit, compact device, compact CPU, processor -Manufacturer: mushroom, processor -Type: P10 CPU/RAM 304060 -Dimensions: 250/230/H40 mm Hfjdpsn Nbmzofx Ahgjh -Weight: 1.3 kg

Condition: like new (used), - Brand: Graco - Reference: CM1145 - General Industry - Application: Bonding, Sealing, PVC, Gaskets, Encapsulation, Molding, Discharging, Filling in case of material shortage - Maximum flow rate: 3.4 L/min - Maximum working pressure: 276 bar - Maximum air inlet pressure: 8.62 bar - Pressure ratio: 40:1 - For 20 L drums - Maximum operating temperature: 49°C - Fully inspected pre-owned product Hfjdpfx Ahev S Dzdogsh - 1-year warranty (Except for electric machines and non-Graco products) - Shipping or in-store pickup available - 21% VAT not included - VAT included. A VAT refund may be requested for VIES-registered companies or those with a TAX ID. - Customs and tariff fees are the buyer's responsibility in the case of imports

Condition: used, mileage: 694,778 km, power: 338 kW (459.55 HP), first registration: 03/2017, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: air conditioning, electric window regulation, Tyre size: 315/80R22.5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Hodsx Upypopfx Ahgofh Number of cylinders: 6 Empty weight: 7.470 kg Carrying capacity: 11.530 kg GVW: 19.000 kg Make of engine: Volvo = Additional options and accessories = - PTO - Tipper hydraulics

Condition: used, mileage: 684,980 km, power: 338 kW (459.55 HP), first registration: 03/2017, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: air conditioning, electric window regulation, Tyre size: 315/80R22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Empty weight: 7.470 kg Carrying capacity: 11.530 kg Hfedpfx Ajx E Uhmohgoh GVW: 19.000 kg = Additional options and accessories = - PTO - Tipper hydraulics

Condition: used, Year of construction: 1962, spindle diameter 160 mm x-travel 6400 mm y-travel 3900 mm z-travel 1450 mm turning speeds 500 U/min power capacity 52 kW Plate area 12000x6000 mm Plate area 7000x3500 mm Plate area 93 m² florplates are optional and we charged extra The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Hsdpfx Ahsyt Ryaogefh We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1972, spindle diameter 180 mm x-travel 8000 mm y-travel 4000 mm Control Siemens type Sinumerik System 3 ram: horizontal adjustment 800 mm Spindle travel W-axis 1400 mm ram: diameter 220 mm engine output 75 kW turning speeds 900 U/min Hsdpfxeyqv Eve Ahgjfh Plate area 8000x6000 mm Overhauled in 1983 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1979, spindle diameter 150 mm x-travel 9500 mm y-travel 2500 mm Hfjdpfx Aoyqv Dlehgeh Control Siemens type 840 C ram: horizontal adjustment 700 mm dimension of the ram 400x400 mm Table load 25000 kg table travel 2500 mm Table area 2000x2500 mm No. 312007 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle diameter 160 mm x-travel 10500 mm y-travel 4000 mm spindle taper ISO 50 z-travel 950 mm turning speeds 3,15-1000 U/min transmission ratio 4 spindle power 58 kW Support sleeve 340x400 mm w-travel 900 mm Feed x 0,12-9600 mm/U Feed y/z/w 0,1-5600 mm/U Plate area 39,5 m² Plate 5400x3500 mm Hjdpfxjyqvzwe Ahgsfh Plate 5900x3500 mm T-slot - distance 365 mm T-slots 35/75 mm Thickness of the plate 360 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: not inspected (used), functionality: unexamined, Harris TGS 215 3-RAM metal baler, 16” square with 600kw hydraulic power pack and hopper Video of baler in operation available on request, further details and photos to follow Machine decommissioned Hodew E Htuopfx Ahgjfh

Condition: excellent (used), Year of construction: 1972, total power requirement 22 kW weight of the machine ca. 8 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Workpiece dimensions: Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Hydraulic infeed impulse 0.0025 – 0.05 mm Total feed way 150 mm External Ø of workpiece carrier disk 810 mm Feeds of rotary workpiece feed system, infinitely variable 25 – 241 mm/s Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight, approx. 8,000 kg Hfodexqrbxopfx Ahgeh Accessories / Special Features: • In 2002 updated IONIC gauge control Model 17A with monitor and direct input of workpiece data including tolerance range, workpiece counting, statistics. The workpieces are continuously measured via two opposite tracer heads, automatically triggering an hydraulic infeed when needed. • Rotary workpiece feed system with Workpiece carrier wheel (Ø 800 mm) and infinitely variable speed adjustment. • Workpiece height check to avoid crashing with griding wheels • Automatic hydraulic dressing device between the two grinding wheels for simultaneous dressing of both wheels. Dressing cycle can be preset (no. of workpieces/time). Hydraulic return of upper grinding slide to original position/workpiece/thickness (saves a lot of time). • ELBARON Oilmist Extractor with stand and adjustable suction cone • Walkable steel podium for easy machine operating and monitoring • Grinding wheel exchanging device, various spare grinding wheels • Central lubrication using grease and oil mist * Separate switch cabinet. * Separate hydraulic unit. • Currently no coolant filtration device available (can may be supplied separately). This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Bearing rings, Piston rings, washers, hydraulic parts, and other pressed parts.) Condition : very good ! Very well maintained ! Please click here to soon view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading