Used Glob-Ram Rm130 for sale (3,561)

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 987 h, Vertical Schraml Drilling Machine Top Drill 130 NC - Usable height: 1300 mm (open top) - Infeed and outfeed: 2900 mm - Glass thickness: 3-30 mm - Overall length: 6000 mm - Width: 2000 mm - Height: 2200 mm - Condition: As new Lrsdpfoyuiwajx Ah Nsk - Year of manufacture: 2011

Condition: good (used), Year of construction: 2007, Bograma TA 15 sheet feeder max. 15,000 cycles/h Mobile, height-adjustable Lrsdpfxeyuixds Ah Nok

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: BT 1335 LH, For sale: Global BT 1335 LH free-arm sewing automation | approx. 100 operating hours | like new | incl. table & bobbin winder Global BT 1335 LH free-arm sewing automation in excellent, almost new condition. The machine was purchased new at the end of 2023 from official Global dealer Wim Vinken BV and has only been used minimally since then. In total the machine has approximately 100 operating hours. Both technically and visually the machine is in very good condition and has always been used in a clean professional environment. Specifications Manufacturer: Global Model: BT 1335 LH free-arm sewing automation Serial number: 2110235 Year of manufacture: 2021 Purchased new: end of 2023 Operating hours: approx. 100 Condition: like new Ledpeyr Nv Dofx Ah Nork Included Bobbin winder, as shown in the additional images. Original machine table and complete setup included. The machine is available immediately and can be inspected by appointment. Please contact us for more information.

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Lrsdpfx Aoyttv Reh Nok

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Measuring range X-axis: 3,500 mm Measuring range Y-axis: 6,000 mm Measuring range Z-axis: 2,000 mm Lrjdpfxjyr Sims Ah Nek Type of input current: Three-phase current Equipment: Lighting, documentation/manual, type plate available Offer details Description Gantry measuring machine Manufacturer: Mora Model: U204-20-35-60 Measuring software: Manufacturer Gemodek, model MS10 Mobile control console Measuring and evaluation unit 2 PCs, manufacturer HP, models XW4300/Z220 2 monitors, 19"/24" Roller shutter cabinet, telescopic drawer cabinet by Lista, W 1,000 mm, 7 drawers Contents: Infrared measuring probe by Renishaw, model PH10M, calibration mandrel, accessories

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: PW2000-003, total height: 1,300 mm, empty load weight: 1,310 kg, load capacity: 2,000 kg, total length: 2,600 mm, total width: 1,800 mm, table width: 900 mm, input voltage: 400 V, working height: 1,100 mm, table length: 1,400 mm, Dimensions LxWxH: approx. 2600 x 1800 x 1300 mm Ledpfxeyr I Dto Ah Nsrk Load capacity: 2,000 kg The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is at the bottom during swiveling, the load-bearing steel profiles are angled upward by 90° to securely hold the plate being turned even in a vertical position during a 90° rotation. Both tables are positioned opposite each other and are swiveled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing base frame, with one table fixed in place and the other movable. The movement is performed by hydraulic cylinders which can displace the table mounted on rollers by approx. 300 mm. The base frame also houses the hydraulic and electrical components. A hydraulic power unit is used as the drive source, supplying oil to the cylinders in response to control commands. The respective valves are actuated electrically and/or hydraulically, initiating and maintaining the required table movements in interaction with each other until the turning process is complete. Particular attention in the design of the hydraulic system is given to operational safety and sensitive switching between pushing and pulling motions. The geometry of the table pivot axes results in changing load effects on the tilt cylinders. The hydraulics are designed to ensure the required performance and prevent overloading the components during normal operation. Suitable filters, in combination with a generously sized tank, ensure high availability of the hydraulic system. The necessary electrical control system is fully integrated into a sheet steel enclosure housing all required components. The core of the control system is a PLC, which processes operating parameters based on the programmed specifications. The emergency stop function and all relays and evaluation units required to operate the functions are also installed. Operation of the turning device is via a control panel featuring a touch panel for entering function parameters, such as Table 1 swivel up, Table 1 swivel down, Table 1 forward, Table 1 back, Table 2 swivel up, Table 2 swivel down, as well as automatic start/stop. To prevent table collision in manual mode, the PLC programming ensures this by using table position and tilt data. After resolving an emergency stop, the PLC control independently completes the turning process. The turning device is equipped with heavy-duty castors, making it mobile. We have several of these devices in daily operation. This unit is unused.

Condition: good (used), functionality: fully functional, power: 24 kW (32.63 HP), fuel type: diesel, empty load weight: 2,300 kg, Year of construction: 2006, operating hours: 2,702 h, Equipment: all wheel drive, cabin, pallet forks, Yard loader / wheel loader KRAMER 180 (340) Year of manufacture: 2006 According to the hour meter: 2,702 operating hours 23.5 kW only 2,300 kg - incl. bucket - incl. forks - hydraulic quick coupler - auxiliary hydraulic circuit up to fork carrier - cab with heating - lighting system - joystick controls - 4-wheel steering - immediately ready for operation! - incl. Luxembourg documents! Lodpfxsylubxs Ah Nork Sale price: €17,900 net Affordable delivery possible!

Condition: used, Year of construction: 2001, functionality: fully functional, feed length X-axis: 2,700 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,000 mm, travel distance X-axis: 2,700 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 25,000 rpm, spindle speed (min.): 100 rpm, rotational speed (max.): 25,000 rpm, rotational speed (min.): 100 rpm, Equipment: rotational speed infinitely variable, 5-AXIS MACHINING CENTER Lredpfox Ryxhox Ah Nek BI-ROTARY HEAD AUTOMATIC TOOL CHANGER FOR 20 TOOLS, HSK 63

Condition: used, Year of construction: 2013, KEG filler, make Framax, type: F-2-Ecodraft, 2 filling stations, made of stainless steel, Lodpfx Aherxuh Sj Njrk control cabinet with touch panel, built on base frame, built in 2013; overall dimensions L: 850 mm x W: 1100 mm x H: 2000 mm

Condition: excellent (used), Precision workshop micrometer from renowned German manufacturer Mahr, model Marameter M, designed for highly accurate measurement of external diameters in the range of 0–40 mm. The device is in very good condition, fully functional, and stored in its original wooden protective case. Specification: • Measuring range: 0 – 40 mm • Model: Marameter M • Manufacturer: Mahr (Germany) • Catalogue number: 3206064 • Application: precise measurement of external diameters / shafts / cylindrical components • Durable metal housing • Arm with interchangeable measuring tips • High measurement stability and repeatability • Comes with the original wooden case Ledpfx Ajxmlgtoh Njrk Condition: • Used, very well preserved • Last calibration: 2023 • Ready for use in a measurement room or laboratory.

Condition: used, Year of construction: 1992, saw blade diameter 1250 mm cutting diameter 380 mm cutting range 480x320 mm motor speeds: 3000 U/min feed speeds 1000 mm/min main drive motor 112 kW cutting speed 10-265 m/min total power requirement 125 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Ledpfx Ahoyqu Rdo Nerk Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: unexamined, Ferwood Code: RU0005378 - Manufacturer Code: TBM 1.2-40-W1-220 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Lredpfxewnpffo Ah Nok

Condition: used, functionality: unexamined, Ferwood Code: RU0005378 - Manufacturer Code: TBM 1.2-40-W1-220 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Lrodpfov Efkysx Ah Nsk

Year of construction: 1999, condition: used, 1 used main spindle drive and Mainspindle drive INDRAMAT RAC 3.5-150-460-L00-W1-220 Siegfried Volz machine tools Lredpfx Aodd Imdeh Nek Rueschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: used, Chain width 17 mm engine 2,2 kW Rotating +-45° Lsdpfx Aotunbush Nerk

Condition: used, functionality: unexamined, Ferwood Code: RU0005376 - Manufacturer Code: TVM 2.2-050-220/300-W1 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Lrjdpfov Efi Ajx Ah Nsk

Condition: good (used), SNDKC 113-03247 / K49 Lredpfx Aheypkxhs Nek Area of application: Drive technology / e.g. Lisec devices, etc. Width: 65 mm Height: 430 mm Depth: 255 mm Weight: 5450 g Condition: Good, second-hand

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 600 kg, workpiece diameter (max.): 40 mm, Round Log Profiling Machine | Log Milling Machine | Log Shaper For sale is a round log profiling machine designed for processing tree trunks. This machine – also known as a round log milling machine or log shaper – enables the production of round log components for log home construction, landscaping, and creative woodworking projects. Description A round log profiling machine for machining tree trunks, ideal for log home construction and demanding timber structures, is offered for sale. The machine performs precise processing of round logs in several coordinated work steps, resulting in perfectly fitting components for natural log houses, log cabins, or structural timber projects. Processing Steps The machine performs several operations in a single process: - Debarking Removal of bark and preparation of the log. - Shaping Uniform rounding and contouring of the log. - Contour and Longitudinal Milling Milling of profiles and contours along the entire length. - Milling of Installation Grooves Thermal barrier / moon groove for precision log house assembly. - Cutting Notching for sockets or joints at 90-degree angles. - Finishing A complete log is processed in approximately 30–40 minutes. Applications - Log house construction - Natural log buildings Lredpfx Ahsyr E Ezs Nsk - Round log structures - Timber constructions Advantages - Multiple work steps in a single machine - Precise processing along the entire log length - Ideal for small to medium production volumes - Electric drive systems Target Users - Log home builders - Timber framers - Timber construction companies - Round log specialists Accessories - Spare cutterhead - Knife set - Knife sharpening machine - Spare parts kit Inspection Inspection possible by appointment. Further information and technical details available on request. The sales price refers to the complete machine including accessories! Keywords: Round log milling machine, log shaper, round log machine, round log profiling machine, log milling machine, timber log milling machine, round log profiler, round log processing machine, log house machine, round log processing unit, post milling machine.

Condition: used, Technical details: space requirements of the machine approx.: 2x Boxen: 0,85x0,55x0,40 / 0,10x0,55x0,4 m Aramis 3D Camera = robust design for high-end applications with high-resolution 3D sensor. Camera resolution 1936 x 1216 pixel Lredpfeu N Auhsx Ah Njk Frame rate (fps) 130 fps at full resolution; 24 fps at 1/2 image height; 450 fps at 1/4 image height: Aramis Adjustable = modular and flexible measurement system for research and industry with user-friendly application. without software (only via manufacturer ) *

Condition: used, Year of construction: 2004, operating hours: 3,623 h, Equipment: all wheel drive, Equipment: * 3,623 operating hours * Deutz engine with 44 kW * 20 KM/H * Bucket * Forks * Additional work lights * Quick coupler * Tires: 12.5-20 Other information: Lrodjyn Tt Eepfx Ah Nek * 2 previous owners * German machine * Year of manufacture: 2004 * Total weight: 6,500 kg * Wheel loader, ready for immediate use In November 2009, at approx. 1,300 operating hours, a new tachometer unit was installed. Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options with special rates. If interested, we are happy to provide you with an individual quote! We welcome trade-ins of your commercial vehicle or construction machinery. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Please note: our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible by our external partners for an additional charge. The information provided in listings, online, on price tags, and in images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment must be verified separately if applicable. Subject to errors and prior sale.

Condition: ready for operation (used), Year of construction: 1992, operating hours: 10,643 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 815 mm, travel distance Z-axis: 815 mm, rotational speed (max.): 3,600 rpm, controller model: Heidenhain iTNC 530, A retrofit of the machine was carried out in 2010! TECHNICAL DETAILS Travel range X-axis: 1,500 mm Travel range Y-axis: 815 mm Travel range Z-axis: 815 mm Clamping table: 3,250 x 815 mm Table load capacity: 5,000 kg Quill stroke: 150 mm Spindle: SK 50 Speed range: 40–3,600 rpm MACHINE DETAILS Control: Heidenhain iTNC 530 Milling heads: Usable as single, double, triple, or quadruple head Total power requirement: 44 kW Dimensions & Weight Required space: approx. 8 x 4 x 4.5 m Transport dimensions base unit: approx. 6 x 3 x 3.5 m Control cabinet: approx. 2.6 x 0.6 x 2.6 m Machine weight: approx. 20 t Operating Hours Control operating hours: 20,987 h Machine operating hours: 19,703 h Program run time: 10,643 h EQUIPMENT Hydraulics Lodpfx Asyrdxtjh Nsrk Various sheet metal parts

Year of construction: 1996, condition: ready for operation (used), We have in stock a large inventory of used axle motors, mounts, etc.. Please ask for demand. From older and as good as new CNC turning and milling machines Lredpjgtmwtofx Ah Nsk INDRAMAT / SIEMENS / FANUC /

Year of construction: 1996, condition: ready for operation (used), Main spindle motor make INDRAMAT Type:2AD160C-B35LA1-BS03-A2V2 Bj.1996 Everything else see type plate Lsdpfx Asgtmuueh Nork From CNC lathe. (We also have the matching motor controller from INDRAMAT)

Condition: used, Year of construction: 1995, power capacity 0 kW volt 0 V ampere 0 A Lsdpfevtr Rcjx Ah Nsrk Data please see typeplate.

Condition: used, power capacity 10,4 Nm volt 0 V ampere 19,5 A Lredpfx Ajvtr S Heh Njk weight of the machine ca. 24 kg