Used Glob-Ram Rm130 for sale (22,697)

Condition: used, machine/vehicle number: 478, pression: 36 t max. mounting height: 135 mm electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm Dkehxsbb Tguo Dw N Ujl weight: 1800 kg

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Dohjrunu Iox Dw N Uskl

Year of construction: 1981, Condition: good (used), wet mixer, batch mixer, liquid mixer, chemical mixer, drum mixer -Manufacturer: KWH VEB, wet mixer with ceramic drum -Type: 2841.5.7521 -Drum capacity: 100 liters -Drum speed: 38 rpm -Motor: 1.1 kW -Dimensions total: 1520/670/H930 mm Djhevmq Iyox Dw N Uokl -Weight: 487 kg

Condition: good (used), Year of construction: 1992, The bender is set up for aluminum, chromatech and plastic frames. Dkehx Deqhugfsw N Usl

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Dkjhx Dwsdzc Rxj N Usl Complete with software controls and dust extraction.

Year of construction: 1997, Condition: excellent (used), Z.V.B. Sonno carcase press Djhxjvdbpvs Dw N Uskl Manufacturer: Z.V.B. Designation: Body press Type: Sonno Body max. 1790 x 1280 mm Operating voltage: 400 V Connected load: 3kW Operating pressure: 7 bar Beijer Electronics E300 Operator Interface control panel Control system: Mitsubishi Melsec FX2N-64MT-DSS SICK light curtain 2 manual switches Year of construction: 1997 General work description The work sequence can essentially be divided into the following steps: Program input Take the program number of the carcass from the list and enter it using the keyboard, confirm the entry with the Enter key The press now moves to the saved dimension for this carcass Pressing process I. After the position has been reached, the cylinders for the base support and the left side stop extend 2. now place the left side on the base support. The side is automatically held in place by an injection suction cup 3. then insert the floor and press it lightly into the dowel holes on the left-hand side 4. then insert the right-hand side and connect it to the floor 5. press the + button to press the bottom with the sides 6. now insert the sheet and fit it into the dowels. 7. press the + button to press the sheet with the sides 8. now check that all connections are clean and that the body is angled. 9. when all parts are correctly connected, press the + button again to switch on the final pressing pressure. 10. you can undo all steps individually by pressing the - button Releasing the press 1. when you have completed all the work on the carcass, end the pressing process by pressing the release button. The pressure cylinders are switched off and the carcass is held in place with the two lower cylinders 2. as soon as the cylinders for the base support are retracted, place the transport pallet on the roller rails. 3. press the release button again to set the carcase down on the pallet and slide it onto the console conveyor. Next carcase I. After the press is empty again, press the + button The press now moves back into position for processing a new carcase of the same type 2. if a different type of carcase is to be pressed, press the F6 key to return to the input page. Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: ready for operation (used), Functionality: fully functional, saw blade diameter: 300 mm, OMGA V113P double saw for frames, strips Specification: • condition - used • manufacturer - OMGA • model - V113P • two 300 mm diameter discs permanently set at a 45 degree angle each • total power 2.2 kW (2 engines of 1.1 kW each) Dkshx Djv Hqllew N Usl • spindles fi 30 mm • pneumatic clamps • cutting cross-section ~ 100 x 130 mm • original painting • additional tables extending the tops (2 pcs.) • own, internal sawdust extraction • 1990 year of production • weight 225 kg • manufacturer's documentation • dimensions 80 x 142 x 132 cm cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos shown show the actual condition of the item for sale • possibility switching on and checking the device on site • the price given in the auction does not include VAT and transport costs

Condition: good (used), approx. 1,100 galvanized stake racks, stake pallets / storage racks / stacking racks, 2 sizes - used -: Price per piece ex location (net): Type: mobile rack large (2 EP’s): €195 Type: mobile rack small: €150 Manufacturer: unknown Year of manufacture: unknown Type: mobile rack large (2 EP’s) Dkehevlx Ryjx Dw N Usl Stock approx. 859 pieces Inside dimensions: 1.85m x 1m x 0.31m Outside dimensions: 2.03m x 1.18n x 0.31m Load capacity: 1,500kg Bar length: 2.10m Usable height: 1.90m Total height; 2.17m Type: small mobile rack Stock approx. 241 pieces Inside dimensions: 1.37m x 1m x 0.31m Outside dimensions: 1.55m x 1.18n x 0.31m Load capacity: 1,500kg Bar length; 2.10m Useful height: 1.90m Total height; 2.17m Used stake pallet, galvanized, TÜV-certified, 2025x1180x310mm, without pipes Art#: 50200U The excellent workmanship of the stake racks and their stable construction form a highly resilient storage system with corresponding stability through the use of stacking plates. The storage rack with TÜV certification can be used for transport and flexible storage • TÜV certified • Space-saving • Suitable for storage and transport • The stake pallet weighs 50 kg. The external dimensions are 2025x1180x310mm, the internal dimensions are 1850x1005x310mm. • Scope of delivery • The stake pallet contains pipes. • Weather-resistant stake rack • The galvanized version of the stake rack offers optimal corrosion protection, is therefore weather-resistant and suitable for both internal and external storage of goods. • Flexible stacking racks • The stacking racks can be stacked on top of each other to save space even when loaded, thus enabling flexible use of your storage space. If necessary, the double mobile racks can be easily dismantled and stowed away to save space. The unique design of the racks enables quick and easy access to the stored goods. Condition: good Available: immediately Location: Dormagen

Year of construction: 2021, Condition: excellent (used), Syspal 600HA2 Eurobin wash frame Dehx Djnbdtisw N Ujkl 2021, stainless, SWL 50Kgs, 3Ph

Condition: new, power: 160 kW (217.54 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 4,100 mm, overall weight: 3,500 kg, emission class: euro6, color: white, suspension: steel, tire size: 195/75 R 16 C, number of seats: 3, Fixed body - Internal length 4.62 m x Entrance height 2.25 m - Internal height 2.35 m x Internal width 2.12 m - Fixed frame - Sliding side tarpaulin with tensioner - Aluminium sides H. 40 cm - 2 side rails - Toolbox - Rear doors Accessories: ABS - ESP - Automatic climate control - Radio/CD/MP3/Bluetooth - Electric windows - Cruise control - Trip computer - Central locking - Electric and heated rearview mirrors - Adjustable sprung driver's seat with armrest - Reinforcement crossbow - Distance and lane maintenance - Parking sensors Dkehx Dov Dduhow N Ujl

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation Dkehxodzc Rfe Dw N Usl 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: good (used), Technical data for the workbench frame: Manufacturer: Jung Heinrich Type: T The scope of delivery includes: 02x workbench stand, used Material color: blue Stand height: approx. 910 mm Stand depth: approx. 1,050 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( welded framework ) 04x workbench crossbars, used Dehx Dsrdy Ivsw N Ujkl Material color: orange Box profile: 120 x 50 mm Truss type: HN 120|20 clear width: 2,700 mm 08x locking pins, used Version: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out The pictures serve to illustrate the material. The material color may vary. The workbench racks are commissioned in an assembled state; The workbench stands are pre-assembled; The production time is usually approx. 3 - 5 working days. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), 150 pieces stacking frames, or chair_corlettes - used- : Price per piece from location: 99.-€ (net)! Manufacturer: unknown, but should be Cordes Type: Stacking frame Side bars pluggable Year of construction: unknown Type 1: Cs-1800.501: Dead weight: 135 kg Load capacity: 700 kg Load capacity: 1400 kg Stackability: 3-fold With bracket for forklift fork Type 2: Cs-1800.000: Own weight: 114 kg Load capacity: 700 kg Load capacity: 1400 kg Stackability: 3-fold Applies to both: Compatible with each other Internal dimensions 180cm x 130cm x 235cm (W/D/H) Dkohx Dw Nergrgfe Ujl Sheet metal base 1.5mm thick Color: Green RAL 6017 synthetic resin paint All four sides with 1 removable cross tube connection each Pluggable in 3 different heights at 700 / 1350 and 1850 from the top edge of the lower part Condition: good Available: immediately Location: 72379 Hechingen

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Dshx Dwofqmtke N Uokl Minimum wall panel height 2000mm Maximum wall panel height 3500mm One man operation Weight of unit 80kgs

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 02x workbench stand, used Material color: white frame profile: approx. 85 x 65 mm stand height: approx. 900 mm stand depth: approx. 1.000 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: green INP profile: approx. 80 x 42 mm clear width: approx. 2.880 mm 16x machine screws, M8 x 35 mm 16x nuts, M8 32x washers, M8 The pictures are for illustration of the material. The material color may differ if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this Dkshx Dw Nehpx Ewj Usl or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: as good as new (ex-display), Year of construction: 2023, Automatic loading and unloading Advanced machining capabilities Ideal for volume production Elevate your door frame lining production with the Centauro Alfa Jamb, a state-of-the-art machine designed for the automatic loading, machining, and unloading of door frame linings and jambs. Combining precision, efficiency, and user-friendly technology, the Centauro Alfa Jamb is the ultimate solution for door frame manufacturing. The powerful CNC router head is capable of performing both vertical and horizontal machining operations. This versatile router head excels in hinge and lock plate recessing or slotting, ensuring each cut is executed with precision and consistency. Additionally, a specialised small router is included for spot drilling hinge screw holes and squaring the corners of hinge recesses, enhancing the accuracy and finish of your products. The Alfa Jamb automates the entire process from loading to unloading, allowing your operators focus on higher-level tasks while the machine handles the repetitive work. Programming is simple thanks to the latest generation TOP12-S color graphic touch screen controller. This user-friendly interface features pre-installed electronic macros, allowing you to quickly set up and adjust machining operations with ease. Specification Technical Information X Axis stroke 2800mm Y Axis stroke180mm Z Axis stroke 150mm Suitable for Jamb dimensions of 2400mm x 200mm x 75mm Router / Milling head 3.3kw, ER25, 0 to 18000 rpm Pilot Hole Drilling Head 2.2kw ER 25, 0 to 18000 rpm 3 x pneumatic vertical workpiece clamps, automatically activated through the program 3 x pneumatic horizontal workpiece clamps, automatically activated through the program Top 12-S industrial touch screen control 12" with simple macro programming CE safety perimeter guarding to sides / rear with a front light beam curtain Dshx Dw Neul Uaaj Uekl Dust extraction connection 120mm Pneumatic supply 6 Bar Overall Dimensions 9644 x 1844mm Overall weight 2000kg Total load 5.6kw Year - 2023 CE. Condition - As new, only used for showroom demonstrations

Condition: good (used), Technical data for the pallet rack upright: Shelf system: Hovuma Dohx Djkwdd Ejw N Uskl The scope of delivery includes: 01x pallet rack upright, used Material color: cream white profile dim.: 85 x 50 x 17 x 3.0 mm Profile type: C 808 S275 Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( welded truss ) 6.640 mm high 870 mm deep

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Dkehob Tmrvex Dw N Usl Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: good (used), Technical data for the pallet rack upright: Racking system: Bito Type: PL 38 Dkjhx Dw Njh Svrno Uol Included in delivery are: 01x pallet rack upright, used Material color: sendzimir galvanized profile dim.: 90 x 65 x 2,00 mm Profile type: P20 Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 2.475 mm high 1.300 mm deep

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: Dshx Dwon Up R Io N Uokl 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm

Condition: used, Technical data for the frame profile: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x frame profile, used Material color: sendzimir galvanized Frame profile: P 20 Profile dimensions: 90 x 65 x 2.0 mm Frame height: 2,475 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: Dkoheufw Acex Dw N Uol This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the or scope of delivery can be requested from us.

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Dshody Hrdox Dw N Uskl Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: good (used), We offer you here a used pallet rack stand of the manufacturer Mic Spica for sale. Technical data of the pallet rack stand: Shelf system: Mic Spica Included in delivery: 01x pallet rack upright, used material colour: cream white Frame profile: 80 x 70 mm Incl. cross and diagonal braces, Dohx Dwegzg Sks N Uokl base plates The uprights are pre-assembled ( screwed framework ) 2.780 mm high 1.000 mm deep

Condition: good (used), Included in delivery: 01x stand protector, used Material color: yellow total height: approx. 970 mm total width: approx. 140 mm inner width (incl. foam): approx. 93 mm inside width (without foam): approx. 134 mm total depth: approx. 60 mm Dohx Doikvktew N Ujkl Material thickness: approx. 3.00 mm Hole diameter: approx. 11 mm Hole grid (HxW): approx. 700 x 50 mm Unit weight: approx. 5.87 kg - without fixing material

Condition: good (used), Technical data for the pallet rack traverse: Shelving system: Meta (Thyssen) Included in delivery are: 01x pallet rack traverse, used Material color: orange Dshx Dsibngnew N Ujkl INP profile: 100 x 50 mm agraffe: 3 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg, with evenly distributed load 02x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out