Used Glob-Ram Rm120 for sale (3,528)

Condition: good (used), Krämer Grebe WW 130 Grinder Power supply: 400V, 50Hz Power: 18kW Capacity: til 4.000 kg/h Height: 140 cm Width: 95 cm Length: 145 cm Weight: 880 kg Gsdpsyk T Dvjfx Afzeir Main material: Stainless Steel Mixing capacity: 100 kg

Year of construction: 2025, condition: new, This robust professional cable stripping machine, type KM1, cuts electrical cables from 1 to 70 mm in diameter. The blades are hardened so when stripping reinforced ground cable they are not immediately blunted. There are 15 different cable entries. The cable is cut from 2 sides so the copper core comes out easily. You can also use it to strip rubber and flat cables. Technical data: Mains voltage: 230 v ~ 50 hz Gijdpfxop I I U Do Afzjr Power: 3000 watts with dual pulley drive. Dimensions: 60 cm long, x 75 cm wide and 90 cm high Machine speed: 35 m/min Output: Depending on the cable 400 and 1200 kg/day Weight: 185 kg.

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 Gsdpfx Afsxn Tz Iezsir - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition

Condition: new, functionality: fully functional, power: 29 kW (39.43 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 48 l, color: yellow, overall weight: 2,070 kg, maximum load weight: 900 kg, lifting power: 1,400 kg/m, lifting height: 2,680 mm, tire size: 27x10.5-15, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.36 m³, Year of construction: 2022, operating hours: 1 h, Equipment: UVV, additional headlights, all wheel drive, cabin, gripper hydraulics, head guard, low noise, pallet forks, parking heater, soot filter, standard shovel, traction control, === MAIN SPECIFICATIONS === Year: 2022 Operating hours: New / Unused Operating weight: 2,070 kg Max tipping load: 1,400 kg Bucket capacity: 0.36 m³ Drive: Hydrostatic Four-wheel steering: Yes Differential lock: Hydraulic (optional) Quick coupler: Yes Cabin: Closed Heated cabin: Yes Air conditioning: No Tyres: 27x10.5-15 – off-road tread Engine manufacturer: Yanmar 3TNV86CT Engine power: 28.5 kW Emission class: Stage V Hydraulic flow: 30 l/min (standard) / 60 l/min (Powerflow) CE certified: Yes Giodpfx Asxct Dlefzer === HIGHLIGHTS === Brand new / unused 2022 machine Yanmar Stage V engine – efficient and reliable Compact dimensions with excellent manoeuvrability Quick coupler, proportional controls, full documentation included CE-certified and ready for immediate use === CONDITION === New / unused – fully inspected, no defects, 100% functional. Inspection possible on request. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide delivery available. Price: €35,000 “as is” (Optional: €37,500 with 12-month warranty) The Kramer 5040 combines compact size with impressive lifting performance and manoeuvrability. Ideal for construction, agriculture, municipal services and industrial applications. CE-certified and immediately available. === DELIVERY === Crane loading available on request. Worldwide transport arranged by Collé Rental & Sales.

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. Giodpfx Afoq I N H Nozjr 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: used, power capacity 7,2 Nm volt 0 V ampere 16,7 A weight of the machine ca. 17 kg Gijdevtr S Tjpfx Afzjr

Condition: used, power capacity 10,4 Nm volt 0 V Gedpfxovtr Syo Afzjir ampere 12,1 A weight of the machine ca. 22 kg

Condition: used, power capacity 6,6 Nm volt 0 V ampere 10,8 A weight of the machine ca. 12 kg Gjdpfx Ajvtr Stofzsir

Condition: used, power capacity 28 Nm Gisdpfx Aevtr Sgsfzer volt 0 V weight of the machine ca. 49 kg

Condition: used, power capacity 606 Nm Gjdpsvtr R Njfx Afzsir volt 0 V ampere 10,8 A weight of the machine ca. 11 kg

Condition: used, power capacity 6,6 Nm Gjdpfx Asvtr R Aofzsir volt 0 V ampere 10,8 A weight of the machine ca. 11 kg

Condition: used, power capacity 606 Nm volt 0 V ampere 10,8 A weight of the machine ca. 12 kg Gjdpfx Aovtr Rvsfzoir

Condition: ready for operation (used), Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control by Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement and dispensing control by Beckhoff, with static 1K and 2K dispensing system. An on-site inspection is possible, not under power. Godpfx Afjylzhxezjir

Condition: ready for operation (used), Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible. Gedeylzhropfx Afzsir

Condition: ready for operation (used), Three identical base modules of the Rampf MC-EASY multifunction dispensing cell are available. Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement, with static 1K and 2K dispensing system. With automation module Digital Robot HORST600 and central operating software for all process participants, with 3x side panels and 1x door, comfort handle, profile half cylinder, base plate for the robot as well as consumables, operator console, light barrier, system light each individually positioned, mounted and wired, panels made of Makrolon. An on-site inspection is possible, not under power. Gedsylzicopfx Afzjir

Condition: good (used), Indramat RAC 3.1-150-460-A0I-Z1-220 Spindle Drive Controller For sale is an Indramat / Bosch Rexroth RAC3.1-150-460-A0I-Z1-220 AC Main Spindle Drive Controller – used, but in good, working condition. Technical details: Supply voltage: 3 × AC 380–460 V Control voltage: AC 230 V Weight: approx. 49 kg Continuous current: approx. 92 A Max. output power: approx. 55 kW Ambient temperature: +5°C to +45°C (operation), −30°C to +85°C (storage) Max. operating altitude: up to 1000 m above sea level. NN Protection class: IP10, humidity class "F" according to DIN 40040 Integrated cooling via fan Integrated emergency stop system Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our shop! Gisdpfsxl A Ncex Afzor International shipping costs upon request!

Condition: used, Year of construction: 2010, operating hours: 3,000 h, Kramer 180 Year of manufacture: 2010 Operating hours: approx. 3,000 h Ready for immediate use Gedpfx Aeyluvpjfzoir incl. folding bucket incl. pallet fork Service: new UVV inspection: new

Condition: excellent (used), Indramat (24474 internal) Gisdpfefg Uu Hjx Afzer Mod.1X1X113-008 Contr.TDM 1.2-50-300-W1

Condition: good (used), Year of construction: 2012, 40 running meters pallet rack Ramada Used item, very good condition, see pictures Height: 4.6 m Depth: 110 cm Beam length: 2.7 m Load capacity per level: 3,000 kg Frames: blue Beams: orange Year of manufacture: 2012 Negotiation price: € 3,090 net ex stock Offer includes: Giodpfx Ajtqdlkefzor + 15 pcs. pre-assembled frames, depth 110 cm, height 4.6 m + 56 pcs. beams, used, length 2.7 m, 3,000 kg load capacity/level +112 pcs. beam locks + 60 pcs. concrete anchors Load capacity labels Goods in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information on request. Constantly over 5,000 running meters of pallet racking from various manufacturers in stock. (Subject to change and errors in technical data, specifications, and prices as well as prior sale! Please see our terms and conditions. All prices excl. VAT ex stock.)

Condition: used, Year of construction: 1998, Manufacturer: CERAMModel: Ecovac 08-1Type: Pneumatic transfer for bulk productsYear: 1998Motor power: 4.07 kWSuction capacity: 184 / 200 m³/hSuction pressure / vacuum: 3 / 3 mbar Gjdpjx R D Dnofx Afzoir

Condition: excellent (used), Year of construction: 2024, Baling Press, Bramidan X30 LP, 30 t pressing force – used, as new: Price ex site: only €12,750 (net) Manufacturer: Bramidan Model: X30 LP Year of manufacture: 2024 Bale size WxDxH (mm): 1200 x 800 x 800 Filling opening WxH (mm): 1090 x 530 Cycle time (average, s): 25 Dimensions WxDxH (mm): 1760 x 1255 x 1995 Weight (kg): 1450 Stroke (mm): 950 Number of bindings: 4 Binding type: Tape / Steel wire Automatic bale ejector Bale weight: - Cardboard (kg): 225-325 - Plastic film (kg): 275-375 Pressing force: 30 t Material types: - Cardboard, plastic film, paper, PET bottles, aluminium cans, tin cans, rigid plastics, textiles, polystyrene. Godpfxox Uwfye Afzeir Noise level: 59-60 dB Low-profile baler with high pressing force Suitable for a wide variety of recyclable materials Low overall height High pressing force Very low noise level Up to 80% savings on volume, space, transport, and CO2 Powder-coated finish ensures durable, clean surfaces in various colours Power supply: 3x400V 50Hz 16A Motor (kW): 4.0 Previous new price: €17,490 (net) Condition: very good Availability: immediately Location: 15745 Wildau (near Berlin)

Condition: like new (used), Frama Inserting Machine, Type DI380 Gjdpoyir Htofx Afzsir Processes 3000 pieces/hour (folding and inserting) Folding types: C-fold, Z-fold, single-fold, double-fold Sealing: Yes Paper input capacity: 325 Insert input capacity: 100 Envelope input capacity: 100

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from DMT CD320 cycle lathe -Type: MOD13/1X0296-029 Giodpfx Aen Tvb Sofzsr -Contr: TD M3..-020-300-WO -Dimension: 330/70/H390 mm -Weight: 6.4 kg

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device -Indramat: AC Servo Line Former from DMT CD320 cycle lathe Gjdjn Tvcdspfx Afzeir -Type: NAM 1.2-15 -Item: 246506 K39/96 -Dimension: 325/105/H390 mm -Weight: 21 kg

Year of construction: 1989, condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from Battenfeld injection molding machine -Type: MOD13/1X... -Contr: TDM 3.2-30-300-W0 -Quantity: 1x servo controller available -Dimension: 390/70/H325 mm Gedpfx Asqgi Ilsfzoir -Weight: 7.7 kg