Used Glob-Ram Rm88 for sale (3,535)

Condition: used, Year of construction: 1979, Intake diameter: 300 mm Discharge diameter: 300 mm Flow rate: 5400 m³/h Motor power: 2.5 kW Iedpfxowm Nrve Ad Eoar Weight: 100 kg

Condition: like new (used), Hardfacing electrode Make Duramit W4 Ijdpfxshhyhye Ad Ejar material 1.2567 diameter 2,5 mm length 300 mm 175 pieces in package 3 packages available 95 Euro per package

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 6 mm length 450 mm 40 pieces in a package 6 packages available Iaodpfxohhyito Ad Eor 95 Euro per package

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 3,25 mm length 350 mm 120 pieces in package 2 packages available 95 Euro per package Iedpfx Adjhhyizj Eear

Condition: refurbished (used), functionality: fully functional, Year of construction: 1990, degree of automation: semi-automatic, We are offering an overhauled folding machine by Kramer. Bending length: 2500 mm Material thickness: 2.5 mm (steel) Weight: approx. 4000 kg The machine has been fitted with new spindle nuts and a new bending rail made from tempered 1.2312 steel. The machine is powered and can be tested. Please contact us to arrange a viewing. Iodpjxcpd Usfx Ad Esar

Condition: refurbished (used), Krämer + Grebe 200L cutter The machine is completely overhauled by us. Iedpfop Aub Iox Ad Eoar All wear parts have been replaced on the machine. The electrics on the machine is new! Errors and prior sale reserved. All information is non-binding. The accuracy and correctness of the information contained and prices are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: used, functionality: fully functional, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 150 mm, fork length: 2,400 mm, drive type: Handbetrieb, Hand pallet truck Mast type: None Technical condition: New Front tyres type: Solid rubber Rear tyres type: Solid rubber Iedsymhakepfx Ad Eear Description: New unit!

Condition: new, machine/vehicle number: 1414, Year of construction: 2022, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 115 mm, construction height: 1,160 mm, .: 1414 Equipment details: Year of manufacture: 2022 Load capacity: 2,500 kg Lift height: 115 mm Recorded operating hours: 1 h Isdpfxstw Ad Se Ad Esar Mast type: None Mast height: 690 mm Length/Width/Height: 2800 / 525 / 1160 mm Operating weight: 140 kg Additional equipment information: - 2400 mm forks - GS Pro 25 with long forks (2400 mm) The GS Series is the ideal solution for all manual transport applications, especially for handling delicate and fragile goods such as glass or ceramics. The premium version also features infinitely variable lowering. The Special Series offers a wide selection of fork lengths and widths to suit every pallet type. --- Operating hours are generally read off from the meter. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers available immediately. Of course, also for rent! We are happy to purchase your USED equipment. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer expressly reserved. In dealer trade, the equipment is sold as is, not reconditioned. All information is subject to change and error.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, mast type: simplex, fork carriage width: 525 mm, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Mast type: Standard Technical condition: New Steering wheel: Rubber; Load rollers: Polyurethane; Tandem; Colour: Green; Version: EVO, manual drive and lifting, entry/exit rollers, 3D steel tiller, proportional lowering valve Iaodpfx Aoyfyymsd Eor

Year of construction: 2012, condition: ready for operation (used), General Data Machine weight 15000 kg Main Drive Spindle motor power 45 kW Iasdpfxjx D Dtgs Ad Esr This INGRAMATIC RP72 L was manufactured in 2012. It features a double starter unit with TR7 dies, capable of threading diameters from M14 to M20. The machine operates at speeds up to 120 rpm, powered by a robust 45 kW motor. Weighing 15,000 kg, it is in very good condition and ready for immediate shipment. CE compliant and includes Brankamp control process. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: new, functionality: fully functional, power: 55.16 kW (75.00 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 120 l, color: yellow, overall weight: 6,100 kg, maximum load weight: 2,900 kg, lifting power: 4,300 kg/m, lifting height: 3,200 mm, tire size: 405/70-24, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 1.15 m³, Year of construction: 2024, operating hours: 3 h, Equipment: UVV, additional headlights, air conditioning, all wheel drive, cabin, gripper hydraulics, head guard, traction control, === MAIN SPECIFICATIONS === Year: 2024 Operating hours: 3 h Operating weight: 6,100 kg Max tipping load: 4,300 kg Bucket capacity: 1.15 m³ Drive system: Hydrostatic Four-wheel steering: Yes Differential lock: Yes (100% connectable) Quick coupler system: Yes Cabin: Closed Heated cabin: Yes Air conditioning: Yes Tyres: 405/70-24 – rough terrain profile Engine manufacturer: Deutz Engine power: 55.4 kW (75 HP) Emission class: Stage V Hydraulic flow: 84 l/min CE certification: Yes === HIGHLIGHTS === New / unused 2023 model with only 3 operating hours Powerful Deutz Stage V engine (75 HP) Closed cabin with heating and air conditioning Mudguards, beacon and standard bucket included CE-certified with full documentation Ready for immediate transport and operation === CONDITION === New / unused – fully inspected and in excellent condition No damage, no faults Inspection possible on request Iedpfx Ajxb Swbsd Esar === LOCATION & DELIVERY === Located in Sittard, The Netherlands Worldwide delivery available Price: €69,500 (EXW / excl. VAT) The Kramer 8115 delivers high stability, strong lifting performance and excellent manoeuvrability. With its 75 HP Deutz Stage V engine, hydrostatic drive and four-wheel steering, it is a powerful and efficient machine suitable for construction, agriculture and industrial use. Fully CE-certified and available directly from stock. === DELIVERY === Crane loading available on request Flexible worldwide transport options Professional handling by the Collé Rental & Sales logistics team

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, Iedegi E Hajpfx Ad Eear loading unit, linear guide with servo motor and pneumatic gripper REXROTH INDRAMAT Type: MKD0771B-061-KP1-KN Ident No. 247238 0001 Year of manufacture: 2000 Axis movement: 2400 mm Carriage length: approx. 500 mm Total length: 3520 mm - Pneumatic feed gripper (clamping gripper with 2 Festo compressed air cylinders) - Standard linear guide 65 x 25 mm - Steel base profile - Ball screw Ø 32 x 10 mm - pneumatic with position indicator - Permanent servo motor type: MKD071B-061-KP1-KN (Part no.: 261989, p. no. MKD071-50234, brake with 24 V DC) Overall dimensions L x W x H: 3520 x 400 x 580 mm Weight: 340 kg good condition possible drive controllers under stock no. 53628 and stock no. 53673

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg Ijdpfodzqaajx Ad Ejar good condition

Condition: used, Year of construction: 2004, Schraml TopDrill double-head glass drilling machine. Maximum drilling height: 1300 mm. Automatic height adjustment. Automatic water feed. In perfectly working condition! Iodsywtn Aepfx Ad Esar

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 987 h, Vertical Schraml Drilling Machine Top Drill 130 NC - Usable height: 1300 mm (open top) - Infeed and outfeed: 2900 mm - Glass thickness: 3-30 mm - Overall length: 6000 mm - Width: 2000 mm Iaodpjyuiwajfx Ad Eer - Height: 2200 mm - Condition: As new - Year of manufacture: 2011

Condition: good (used), Year of construction: 2007, Bograma TA 15 sheet feeder Iodeyuixdjpfx Ad Eear max. 15,000 cycles/h Mobile, height-adjustable

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: BT 1335 LH, For sale: Global BT 1335 LH free-arm sewing automation | approx. 100 operating hours | like new | incl. table & bobbin winder Global BT 1335 LH free-arm sewing automation in excellent, almost new condition. The machine was purchased new at the end of 2023 from official Global dealer Wim Vinken BV and has only been used minimally since then. In total the machine has approximately 100 operating hours. Both technically and visually the machine is in very good condition and has always been used in a clean professional environment. Iaedpfx Adjyr Nv Dj Ejr Specifications Manufacturer: Global Model: BT 1335 LH free-arm sewing automation Serial number: 2110235 Year of manufacture: 2021 Purchased new: end of 2023 Operating hours: approx. 100 Condition: like new Included Bobbin winder, as shown in the additional images. Original machine table and complete setup included. The machine is available immediately and can be inspected by appointment. Please contact us for more information.

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Iaodoyttv Rjpfx Ad Eor

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Measuring range X-axis: 3,500 mm Iasdpfx Aoyr Simsd Eer Measuring range Y-axis: 6,000 mm Measuring range Z-axis: 2,000 mm Type of input current: Three-phase current Equipment: Lighting, documentation/manual, type plate available Offer details Description Gantry measuring machine Manufacturer: Mora Model: U204-20-35-60 Measuring software: Manufacturer Gemodek, model MS10 Mobile control console Measuring and evaluation unit 2 PCs, manufacturer HP, models XW4300/Z220 2 monitors, 19"/24" Roller shutter cabinet, telescopic drawer cabinet by Lista, W 1,000 mm, 7 drawers Contents: Infrared measuring probe by Renishaw, model PH10M, calibration mandrel, accessories

Condition: used, Year of construction: 2001, functionality: fully functional, feed length X-axis: 2,700 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,000 mm, travel distance X-axis: 2,700 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 25,000 rpm, spindle speed (min.): 100 rpm, rotational speed (max.): 25,000 rpm, rotational speed (min.): 100 rpm, Equipment: rotational speed infinitely variable, 5-AXIS MACHINING CENTER Iedpfx Adox Ryxho Eear BI-ROTARY HEAD AUTOMATIC TOOL CHANGER FOR 20 TOOLS, HSK 63

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: PW2000-003, total height: 1,300 mm, empty load weight: 1,310 kg, load capacity: 2,000 kg, total length: 2,600 mm, total width: 1,800 mm, table width: 900 mm, input voltage: 400 V, working height: 1,100 mm, table length: 1,400 mm, Dimensions LxWxH: approx. 2600 x 1800 x 1300 mm Load capacity: 2,000 kg The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is at the bottom during swiveling, the load-bearing steel profiles are angled upward by 90° to securely hold the plate being turned even in a vertical position during a 90° rotation. Both tables are positioned opposite each other and are swiveled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing base frame, with one table fixed in place and the other movable. The movement is performed by hydraulic cylinders which can displace the table mounted on rollers by approx. 300 mm. The base frame also houses the hydraulic and electrical components. Iodpfx Adeyr I Dto Eear A hydraulic power unit is used as the drive source, supplying oil to the cylinders in response to control commands. The respective valves are actuated electrically and/or hydraulically, initiating and maintaining the required table movements in interaction with each other until the turning process is complete. Particular attention in the design of the hydraulic system is given to operational safety and sensitive switching between pushing and pulling motions. The geometry of the table pivot axes results in changing load effects on the tilt cylinders. The hydraulics are designed to ensure the required performance and prevent overloading the components during normal operation. Suitable filters, in combination with a generously sized tank, ensure high availability of the hydraulic system. The necessary electrical control system is fully integrated into a sheet steel enclosure housing all required components. The core of the control system is a PLC, which processes operating parameters based on the programmed specifications. The emergency stop function and all relays and evaluation units required to operate the functions are also installed. Operation of the turning device is via a control panel featuring a touch panel for entering function parameters, such as Table 1 swivel up, Table 1 swivel down, Table 1 forward, Table 1 back, Table 2 swivel up, Table 2 swivel down, as well as automatic start/stop. To prevent table collision in manual mode, the PLC programming ensures this by using table position and tilt data. After resolving an emergency stop, the PLC control independently completes the turning process. The turning device is equipped with heavy-duty castors, making it mobile. We have several of these devices in daily operation. This unit is unused.

Condition: good (used), functionality: fully functional, power: 24 kW (32.63 HP), fuel type: diesel, empty load weight: 2,300 kg, Year of construction: 2006, operating hours: 2,702 h, Equipment: all wheel drive, cabin, pallet forks, Yard loader / wheel loader KRAMER 180 (340) Year of manufacture: 2006 According to the hour meter: 2,702 operating hours 23.5 kW only 2,300 kg Iodeylubxepfx Ad Esar - incl. bucket - incl. forks - hydraulic quick coupler - auxiliary hydraulic circuit up to fork carrier - cab with heating - lighting system - joystick controls - 4-wheel steering - immediately ready for operation! - incl. Luxembourg documents! Sale price: €17,900 net Affordable delivery possible!

Condition: used, Year of construction: 2013, KEG filler, make Framax, type: F-2-Ecodraft, 2 filling stations, made of stainless steel, control cabinet with touch panel, built on base frame, built in 2013; Ijdpfx Aorxuh Sod Ejar overall dimensions L: 850 mm x W: 1100 mm x H: 2000 mm

Condition: used, Year of construction: 1992, saw blade diameter 1250 mm cutting diameter 380 mm cutting range 480x320 mm motor speeds: 3000 U/min feed speeds 1000 mm/min Iasdpfx Asyqu Rdjd Ejr main drive motor 112 kW cutting speed 10-265 m/min total power requirement 125 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Precision workshop micrometer from renowned German manufacturer Mahr, model Marameter M, designed for highly accurate measurement of external diameters in the range of 0–40 mm. The device is in very good condition, fully functional, and stored in its original wooden protective case. Specification: • Measuring range: 0 – 40 mm • Model: Marameter M Iedpfxoxmlgts Ad Esar • Manufacturer: Mahr (Germany) • Catalogue number: 3206064 • Application: precise measurement of external diameters / shafts / cylindrical components • Durable metal housing • Arm with interchangeable measuring tips • High measurement stability and repeatability • Comes with the original wooden case Condition: • Used, very well preserved • Last calibration: 2023 • Ready for use in a measurement room or laboratory.