Used Terex-Schaeff Skl 844 for sale (659)

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material Dcjb E Nefg E Hlsv T Aeg 6. Open the vise

Condition: new, power: 78 kW (106.05 HP), gearing type: mechanical, fuel consumption (urban): 11.2 l/100km, fuel consumption (extra-urban): 7 l/100km, fuel consumption (combined): 8.6 l/100km, CO2 emissions: 136 g/km, emission class: euro6, color: white, number of seats: 2, Year of construction: 2024, Equipment: ABS, front-end loader, DEK:[8518444] READY FOR DELIVERY NEW TO BE REGISTERED TOP VERSION , THREE WAY TIPPER 2600 X 1800 PRICE EXCLUDING VAT Dsb Eovt Az Es Nv T Aocg

Condition: refurbished (used), Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: Heidenhain, controller model: Millplus, total height: 2,140 mm, total length: 20 mm, total width: 1,530 mm, table load: 250 kg, rotary table diameter: 800 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 9,000 rpm, overall weight: 3,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, number of slots in tool magazine: 16, power: 9 kW (12.24 HP), Equipment: documentation/manual, rotational speed infinitely variable, Cover Maho DMU 50 T -Control: Millplus M or optionally Heidenhain TNC 426 -Machine number: 11035510844 -Travel X-, Y-, Z-axis: 500/400/400mm -feed speed 0.01-10000 mm/min -rapid traverse 12 m/min -Spindle speed: 20-9000 1/min -Tool holder: SK40 DIN 69871 -Tool magazine with 16 places -Machine weight approx. 3000kg -Transport dimensions (L x W x h) 2.00 x 1.52 x 2.14 -Incl. 4 machine feet The machine has been completely overhauled. A geometry protocol was created, the geometry is within the tolerance for new machines. The following work/overhauls were carried out on the machine: -Complete disassembly -Basic cleaning of all components -Cleaning of the switch cabinet interior -Overhauled ball screw drives in X/Y/Z -General overhaul of the main spindle incl. drive motor -Overhaul of all drive controllers -Renewal of the stop buffers of the axes -Replacement of all toothed belts -Conversion to a crash-proof tool changer -Installation of a new maintenance unit -Replacement of all coolant and pneumatic lines -Installation of switchover between coolant & compressed air as cooling medium Dcebjuii E Rs E Nv T Aog -Retrofitting a chip rinsing gun -Repainting the work area and cladding parts with 2K paint -Replacement of the protective windows with VSG -Renewal of the control panel -Installation of a TFT monitor -USB interface for data transfer via CDS-Lite -Replacement of the machine light with an LED2Work CENALED spotlight -Installation of a Rittal air conditioning unit -Replacement of the main switch -KSS tray repainted -Creation of a geometry & acceptance protocol An on-site inspection / test under power is of course possible. We are happy to offer you transportation, installation and commissioning on site. Everything from a single source: We at Baumgärtner CNC GmbH & Co. KG are a company that specializes in: -service -maintenance -overhaul -automation of DMG machines and other well-known manufacturers. We accompany you! From the purchase of the machine, to transportation and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,748 h, Functionality: fully functional, punching force: 22 t, workpiece length (max.): 1,550 mm, workpiece width (max.): 3,050 mm, sheet thickness (max.): 8 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! Trumpf TruMatic 7000 - 1600 (large format) with additional equipment and automation AUTOMATION - SheetMaster with peeling system including positioning aids for large format + first additional package with 9 suction cups, incl. vacuum ejector - Unloading monitoring - GripMaster large format - SortMaster pallet sorting function on four pallets TECHNICAL DETAILS Control system: TRUMPF Rexroth IndraMotion MTX Punching work area: 3,050 x 1,550 mm Laser working area: 3,050 x 1,550 mm Combined working area: 2,500 x 1,550 mm Control system: Siemens Sinumerik 840 D Laser power: 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN Active blank holder: 4.5 - 20 kN Linear magazine: 21 tools with 4 clamps Programmable chute: 500 x 500 mm Positioning speed X / Y / simultaneous: 100 / 60 / 116 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 1200 rpm Stroke sequence marking: 2800 1/min Position deviation: ± 0.10 mm Position spread: ± 0.03 mm MACHINE DETAILS Length: approx. 10.5 m Width: approx. 9 m Height: 2.5 m Blasting time/laser switch-on time: 12,748 h Machine switch-on time: 87,844 h Operating voltage: 400 V / 50 Hz Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h EQUIPMENT - Sturdy, easily accessible C-frame - Drives with maintenance-free three-phase motors - Foot pedal clamp closing - Ball tables Djb E Nv Touhygps Aecg - TASC 3 laser control - Jet pipe ventilation with compressed air - FastLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Electro-hydraulic punching head - Rotatable mono tool holder ADDITIONAL EQUIPMENT - TruFlow 3200 laser incl. LensLine and optimized standby - MultiTool function - Thread forming function - Marking/quick beading function - Engraving function - Deburring and rolling technology function - Active die - Spray lubrication Die incl. progr. lubricant container with level monitoring - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts

Condition: used, Functionality: fully functional, Year of construction: 2012, operating hours: 16,844 h, fuel type: gas, Equipment: cabin, Hyster H2.0FT year of manufacture 2012 lift capacity 2000 kg duplex mast mast lifting height +/- 3300 mm mast structural height +/- 2170 mm LPG drive weight +/- 3660 kg engine power 38 kW front tires 7.00x12/5.0 rear tires 6.00x9/4.00 full cabin forks fork side shift Technical documentation of the truck Mileage 16844 mth The truck has been serviced, functional, ready for work. The following has been done to the truck: Cooling fluid replacement Dob E Nvot Uyzhj T Aecg Oil change Filters, oil, air and LPG replacement Timing and spark plug replacement Engine seal replacement Engine valve replacement.

Condition: not inspected (used), Functionality: unexamined, machine/vehicle number: 43168448, Electric motor for DEMAG AC hoist Type: KBH100 B 4/12, Serial No: 43168448, 1.00/0.28 kW 25/15 % ED, 1390/425 rpm., IMB14 with brake (complete set) Dcsb E Nsu Dkyzsv T Aeg ANR: 61607700 ASN: 00901

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m Dceb E Nvjd Iipme T Aeg PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: new, Selling price: € 1.000, US$ 1.053 Dcjbspa Rqce E Nv T Asg Bucket volume: 7.1 m^3 Buckets for Liebherr 974 and Terex RH40 Orange bucket is for Doosan DX500 We become your solution partner for your mining sites. Contact for detailed information, price is representative.

Year of construction: 2023, Condition: new, Polyp Grapple Attachment for Terex Fuchs, Sennebogen, Liebherr Dob E Nv Ton E Scpj Aocg