Used Oil & Steel Octopussy 1465 for sale (27,413)

Condition: excellent (used), Year of construction: 2016, 1 used rapid steam generator ----- Manufacturer: CERTUSS Type: Universal TC Capacity: 700 kg/h Maximum heat output: 459 kW Operating pressure: 10 bar Water capacity: 103.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2016 Equipped with a Certuss gas burner, gas control system, Dkjln Tzewhxh Aj A Iel control cabinet with touch control, mounted on the boiler body, and the existing coarse and fine fittings

Condition: used, Year of construction: 2004, operating hours: 10,000 h, Field of application: Construction Serial number: 04085xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 15082 Specifications: Model year: 2004 Hours: Approx. 10,000 hours (Hour counter has stopped) Chassis: See pictures Belt width: Approx. 40 cm Equipped with winch Includes Dynaset generator Services: Performed both by the owner himself and at the workshop Ready for delivery M l: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tons Description: The hour meter has stopped, but the owner estimates that the machine has run approx. 10,000 hours. The engine was replaced 2 years ago and has only run 500 hours since the change. Drills 193 mm holes and the included equipment includes a drill bit and 120 meters of rods for immediate use. Djln Tevg Nt Ioz A Iokl The machine is equipped with a 4-cylinder Deutz engine that only has 500 hours on it after engine replacement. It is ready for delivery and ready for work. Please contact us for more information or a viewing! Hours: 10000

Condition: good (used), machine/vehicle number: 98260075, one used profile steel shear WMW Dkjln Tzob Ilbfs A Iel Punching capacity 420kN(42Tons) throat of the punch 320mm flat steel shear shears 100x18mm bar shear shears solid material round/square 36/30mm Further technical data on request.

Condition: used, Used Viessmann type Vitoplex 200 hot water boiler. Heating capacity rated 900kw at 6 bar pressure with maximum 100 deg.c. Dkeln Tz Ajvtn Has Iel Includes Oilon model GP-90 M biogas burner. Includes various heat exchanger, pumps, values & instrumentation all housed in Energytech container. Has double membrane type Tecon Biogas 215 gas holder. Approximate capacity 660cumt with an operating pressure at 33mbar.

Condition: good (used), Year of construction: 1987, number of straightening rollers: 7, coil weight: 500 kg, material thickness: 5 mm, sheet thickness steel (max.): 5 mm, coil width: 200 mm, sheet thickness (max.): 5 mm, load capacity: 500 kg, material width: 200 mm, CONTROLS .. electronic controls Dkeln Tev T Thisz A Ijl OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 200 mm .. sheet thickness max.: 4.5 mm .. coil weight max.: 0.5 to DECOILER .. coil weight max.: 0.5 to .. mandrel expansion range from: 250 mm .. mandrel expansion range up to: 550 mm LEVELLER UNIT .. sheet width max.: 300 mm .. sheet width (min): 20 mm .. sheet thickness max.: 4 mm .. sheet thickness min.: 0.5 mm .. material cross section max. (450 N/mm2): 800 mm² .. number of leveller rolls: 7 .. diameter of leveller rolls: 65 mm .. number of infeed-/outfeed rolls: 4 .. diameter of feed rolls: 65 mm .. drive power: 1.5 kW .. loop controls: yes ELECTRICAL SPECIFICATIONS .. mains voltage: 380 V .. mains frequency: 50 Hz

Year of construction: 2003, Condition: used, Additional title: brew vessel from stainless steel Total volume: 260 hl Diameter approx.: 3 m Diameter incl. insulation approx.: 3 m Frame height: approx.: 2 m Width: 3,4 m Material: stainless steel 1.4301 Base construction: on stainless steel pipe supports, ground pegged Djln Tjvcqz Esz A Iskl Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Condition: excellent (used), Year of construction: 1996, operating pressure: 10 bar, 2 used steam boilers ----- - mounted on a skid - Manufacturer: LOOS, Gunzenhausen Dsln Towhxhvoz A Ijkl Type: U-HD Heating surface approx.: 14 sq m Capacity: 800 kg/h Permissible operating pressure: 10.0 bar Increased test pressure: 18.0 bar Water capacity at low water level approx.: 748 l Water capacity when full approx.: 1,108 l Year of construction: 1996 Equipped with a Weishaupt GL3/1-E oil burner, ZMD, 90-630 kW, gas control line, feedwater pump, control cabinet and the existing coarse and fine fittings.

Year of construction: 2015, Condition: excellent (used), 10 turning steels Make Sandvik Coromant : 1 : 340 SC5 DCLHR 291311 285 2226 2 : 340 SC5 DCLHR 291311 285 2226 3 : 340 SC5 DCLHR 291311 285 2226 4 :C5-PCLNB-35060-12 Sumitomo 5: PSC50-DDHNL-35060-15 6: C5-PCLNB-35060-12 Sumitomo 7: C5-PCLNB-35060-12 Sumitomo 8: SECO S5-DCLNR-35060-12 9: MPDES26073-105R03C 10 :MPDES 26073-105RO03C Tools are sold individually or as a lot Dkelnofr T D Tj Tz A Iel Unit price 80 Euro plus VAT.

Condition: used, Year of construction: 2008, operating hours: 13,000 h, Field of application: Construction Serial number: AVO08A1388/8992 005xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20163 Specifications: - 2008 model - Engine hours: Approx 13000 - Impact hours: Approx 6500 hours - Weight: 15000 kg - Machine width: 241 cm - Track width: 30 cm - Meter counter - Angle gauge - 1838 Hammer - Stand changer - Carousel - Replaced screen - Replaced engine (unsure of hours) - Repacked cylinder on swing and tilt on tower - Service performed by owner - Undercarriage (see pictures) - Lights - Radio control - Ready for delivery Description: Djln Tjwdvg Uoz A Ijkl We have a 2008 Atlas Copco D7-01 Drilling rig w/ cop1838 hammer carousel and stand changer for sale. The engine and screen on the rig have been replaced. Some cylinders on the swing and tilt of the tower have also been repacked. The rig otherwise functions as it should according to the owner. Errors and defects may occur Ready for delivery. Hours: 13000 Total Weight: 15000 Width: 241 Hammer hours: 6500

Condition: excellent (used), DATEC EMJ-2505 Coil Feeder, Sheet Winder Djln Tzewh Ttas A Ijkl Manufacturer: DATEC CO., LTD. Type: EMJ-2505 Coil Width: 250 mm Coil Inner Diameter: 300–508 mm ⌀ Coil Outer Diameter: 1000 mm ⌀ Coil Weight: 500 kg Sheet Thickness: 0.3–2.6 mm Compensating Capacity: 480 mm² Speed: 12 m/min Motor Power: 0.4 kW Input Voltage: 220 V / 50 Hz

Condition: used, Year of construction: 1990, number of straightening rollers: 21, coil weight: 3,000 kg, material thickness: 7 mm, sheet thickness steel (max.): 7 mm, coil width: 260 mm, sheet thickness (max.): 7 mm, load capacity: 3,000 kg, material width: 260 mm, controller manufacturer: SIEMENS, controller model: S7, CONTROLS .. PLC SIEMENS S7 OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 260 mm .. sheet thickness max.: 6.5 mm .. coil weight max.: 3 to Doln Towh S Ucoz A Iekl .. feed velocity max.: 20 m/min .. feedstock transport direction: right to left COIL CHAIR .. coil weight max.: 3 to DECOILER .. design: single reel, traversable .. sheet width max.: 260 mm .. coil weight max.: 3 to .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm LEVELLER UNIT .. sheet thickness max.: 6.5 mm .. material cross section max. (450 N/mm2): 1500 mm² .. number of leveller rolls: 21 .. diameter of leveller rolls: 50 mm .. loop controls: yes decoiler KOHLER, type 3000.1 with coil-chair straightening machine KOHLER, type KRM 50.260/2 transfer bridge 6970 mm, hydraulic operated

Condition: used, Year of construction: 2015, Functionality: fully functional, FOR SALE | Heidelberg SBG | 56x77cm ・Fully Refurbished 2015 ・2 Foil Rewind ・4 Zone Heated Steel Drop-In Plate ・Automatic Impression ・Superb Machine | Fully Serviced | Excellent Condition Dkjln Tzjwh I Skj A Isl CAN BE VIEWED AND TESTED IN THE UK AVAILABLE NOW | £26,500

Condition: good (used), Minipack Torre Mailbag Packer The device is functional and ready for production, in very good condition. The photos show the product being sold. Produced in Italy. Manufacturer’s description: Mailbag is a digital compact system for packaging in plastic bags, ideal for packaging brochures, newspapers, books. Single-phase power supply (airless) is easy to use with mounted wheels, the system can be easily moved from one place to another with minimal fuss. A product, e.g. a magazine inserted into the feeder, initiates a photocell, detects the package and moves the film and product to the closing system. The combination of transverse and longitudinal seals closes the package and also creates a seal for the next product. The finished package gently falls into the receiving basket at the bottom of the machine. Doln Tzowha Abs A Ijkl Technical data: Production speeds, depending on package and film dimensions (up to 1200 pph) Min. package width 160 mm Max. package width 250 mm Min. package length 100 mm Max. package length 360 mm Max. film thickness 30 microns Machine dimensions 600 mm x 840 mm x 1050 mm Weight 144 kg Power supply 230V Power consumption 0.6 kW

Condition: good (used), Year of construction: 2008, operating hours: 15,244 h, General information Field of application: Construction Serial number: 108T11701-1 Drivetrain Drive: Track Make of engine: C7 Weights Empty weight: 15.100 kg Condition Technical condition: good Dkoljwdw Nkjn Tz A Ijl Visual appearance: good Other information Machinetype: Top hammer Emission level: Stage IIIA / Tier III Delivery terms: EXW Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, Year of construction: 2019, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 20117 Dkeln Tzewdu Has A Iol 2019 Sandvik DX800I Drilling Rig with GPS and CME Grinder Model year: 2019 Hours: Approx. 8900 hours (can increase) Stroke hours: Approx. 3370 hours Weight: Approximately 20,000 kg New belts: May 2023 Chassis: See pictures Leica GPS CME grinder Vacuum cleaner Winch Mounted larger hammer RD 925 (October 2023, cost 391,000 NOK) New belt drive (June 2024) New hydraulic tank (December 2024) Remote control Radio/CD Air conditioning/AC Ready for delivery Description: Well maintained Sandvik DX800I drilling rig from 2019, with approx. 8900 hours. The rig has received significant upgrades in the last two years, including new hammer RD 925 (October 2023), new tracks (May 2023), new track gear (June 2024) and new hydraulic tank (December 2024). All services have been followed up, and maintenance is in order. Fitted with Leica GPS, CME grinder, vacuum cleaner, winch and remote control. Ready for delivery! Total Weight: 20000

Condition: ready for operation (used), This line can process cold-rolled plate / hot pickled plate / hot galvanized plate / electro galvanized plate / prepainted sheets minimum thickness: 0,3 mm Endproduct: - min/max length: 300/6000 mm - productioncapacity 300 mm 4000 pieces per hour - productioncapacity 6000 mm 1000 pieces per hour - total installed power: 500 kW Line consists of: 1) Soenen 4 armed coilholder Type AL1600/27/4 - max cap per arm: 27 ton - speed: 1 turn per minute - opening hook: 190 mm - power: 2,5 kVa - weight: 26 ton 2) Soenen coilwagon Type HH27 - max cap: 27 ton - max lifting height: 800 mm - min outside dia: 508 mm - displacement: 15 meter - displacementspeed: 8 m/min - turning speed: 10 m/min - weight: 8,6 ton 3) Soenen Decoiler Type AM1600/27V - max cap: 27 ton - min/max width: 250/1600 mm - min/max outside dia: 508/2000 mm - min/max inside dia: 480/520 mm - max decoilingspeed: 100 m/min - weight: 21 ton 4) Soenen feeder rolls + shear Type PR1600 - min/max width: 250/1600 mm - min/max thickness: 0,3/4 mm - dia of rolls: 160 mm - speed: 20m/min - weight: 3 ton 5) Pit 6) Soenen Puller Type 2VR1600EE - min/max width: 250/1600 mm - min/max thickness: 0,3/4 mm - dia of rolls: 95,5 mm - productioncapacity 500 mm 4000 pieces per hour - productioncapacity 6000 mm 1000 pieces per hour - max speed: 150 m/min - weight: 5,8 ton 7) Soenen high speed mechanical shear Type CGM4-16 - min/max thickness: 0,3/4 mm - 6 mm st37 - max length: 1600 mm - cuttingangle: 1° - 200 strokes per minute - interchangable cassette with cuttingknives - weight: 7,6 ton 8) Soenen outfeed - speed: 170 m/min - width: 1600 mm - length from cuttingline: +- 7000 mm - weight: 4,2 ton 9) Soenen Outfeed conveyor Type TB1,6 x 7 Dkjlnjwdy Sbo Tz A Ijl - width: 1600 mm - length starting from cutting line: +- 7000 mm - speed: 170 m/min - power: 2x 15kW - weight: 4,2 ton 10) Soenen Stacking unit Type MTB1,6 x 3D - min/max width: 250/1600 mm - min/max length: 300/6000 mm - min/max thickness: 0,3/4 mm - max stackingcapacity: 4000 pieces/hour - transportspeed: 180 m/min - weight: 21 ton Workwidth x sheetthickness: 1600 x 4 mm Straightner: no Shear: yes

Condition: used, Year of construction: 2008, material width 600 mm coil weight 2 x 1,5 t coil internal dia. 370 - 630 mm Delnjv Svbis Tz A Iskl coil outside dia. 1560 mm speed 12 U/min Power capacity 1,1 kW Weight 1,5 t Dimensions (WxDxH) 2,5 x 1,2 x 1,9 m double decoiler, swivellable with motor, manual expansion, coil loop control

Condition: good (used), dimensions (l x w x h)approx. : 3550 x 2400 x 2300 mm weight approx. 7000 kg coil weight : 6000 kg: Coil width 1250 mm Max coil diameter: 2500mm Coil inside diameter: 480-510mm Without control cabinet! Dolnohhyzcj Tz A Ijkl

Condition: used, Year of construction: 2006, Functionality: fully functional, overall weight: 3,500 kg, type of input current: three-phase, pressure: 6 bar, nominal heat output: 1,400 kW (1,903.47 HP), temperature: 105 °C, tank capacity: 2,040 l, fuel: domestic gas H, frequency: 50 Hz, Equipment: type plate available, Viessmann VITOPLEX SX1 1400kw hot water boiler with WEISHAUPT G30/2A gas burner. Manufacturer: Viessmann VITOPLEX SX1 Year of construction: 2006 Nominal heat output: 1400 kW Boiler water content: 2040 liters Max. water pressure in the heating circuit: 6 bar Efficiency: 94% Maximum water temperature in the heating circuit: 105°C Nominal voltage: 230V 50Hz 6A Boiler control: Vitotronic 100 Fireplace pipe diameter: 300 mm Dimensions: Length: 2540 mm Width: 1380-1840 mm Height: 1900 mm Weight: approx. 2500 kg Gas burner: Weishaupt G30/2A complete assembly. Version: ZM-LN Year of construction: 2007 Heat output: min. 300 - max. 1800 kW Connection pressure: min. 15- max. 500 Mbar Gas type: natural gas Gas control valve: DUNGS DMV-D 5065/11 Dkoln Tz Aeudllvo Ijl Pressure switch: Dungs LGW 50 A2P Siemens SQM10.16532 Stellar Drive Leakage tester Dungs VPS-504 S04 with stuffing box Leak tester Dungs VPS-504 S04 Electric power: 6 kW Control voltage: 230 V 50 Hz 1 Phase Mains voltage: 400 V, 50 Hz, 3 Phase

Condition: used, Year of construction: 2001, coil weight: 20,000 kg, coil outer diameter: 2,000 mm, coil width: 1,400 mm, load capacity: 20,000 kg, material width: 1,400 mm, material thickness: 3 mm, controller manufacturer: SIEMENS, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, CONTROLS .. electronic controls SIEMENS OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 1400 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DECOILER .. design: single reel .. sheet width max.: 1400 mm .. sheet width (min): 200 mm .. coil weight max.: 20 to .. max. diameter of coil: 2000 mm Dsln Tswf A R Nez A Iekl .. mandrel expansion range from: 508 mm .. mandrel expansion range up to: 610 mm STRIP-FEEDER .. sheet thickness max.: 3 mm .. speed max.: 30 m/min

Condition: used, Year of construction: 2013, operating hours: 7,368 h, Equipment: air conditioning, General information Field of application: Construction Serial number: F095088 Drivetrain Drive: Track Make of engine: C15 Weights Dkjln Tzjv Tuizo A Isl Empty weight: 62.000 kg Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 18,105x3,4x3,5 Production country: DE Additional information Please contact Matthias Eyckmans, Bart Apers or Jeroen Heindryckx for more information

Condition: used, Boiling Kettle Doln Tz Aetuwf Nj Ijkl Manufacturer: Bastra Made of stainless steel Dimensions: 95x145x115cm Volume: 350 liters

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm material cross-cut 1200 mm² no. of straightening rolls 9 straightening roll diameter 30 mm speed 0 - 40 m/min power requirement 15,0 kW Weight 5,2 t Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll Dkoln Tzsv Svaxe A Ijl - coil loop control via ultrasound

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, overall weight: 2,700 kg, total width: 1,530 mm, total length: 2,600 mm, total height: 2,050 mm, pressure: 6 bar, input voltage: 400 V, nominal heat output: 1,120 kW (1,522.77 HP), heating capacity: 1,120 kW (1,522.77 HP), temperature: 120 °C, tank capacity: 1,531 l, fuel: domestic gas H, frequency: 50 Hz, Viessmann VITOPLEX SX1 boiler with WEISHAUPT G30/2A gas burner. Manufacturer: Viessmann VITOPLEX SX1 Year of manufacture: 2003 Nominal heat output: 1120Kw Boiler water capacity: 1531 Liter Max. water pressure in the heating circuit: 6 bar Efficiency: 94% Heating circuit water temperature max: 120°C Nominal voltage: 230v 50Hz 6A Boiler controller: Vitotronic 100 Pipe connection: 2x DN125 1XDN50 Chimney pipe diameter: 300mm Dimensions: Length: 2600mm + gas burner Width: 1380+140mm Delov H Rt Nsn Tz A Iekl Height: 2050mm Weight: 2500kg ca Gas burner: Weishaupt G7/1-D with complete assembly. version: ZMD-LN year of manufacture: 2003 heat output: min 250- max 1550kw connection gas pressure: min 15- max 500Mbar gas type: natural gas flame tube diameter: flame tube length: gas control valve: DUNGS DMV-D 5065/11 pressure switch: Dungs LGW 50 A2P Siemens SQM10.16562 Damper actuator Tightness tester Dungs VPS-504 S04 with gland Tightness tester Dungs VPS-504 S04 Electrical output: 4.07 kw control voltage: 230v 50Hz 1 phase mains voltage: 400v 50Hz 3 phase

Condition: used, Year of construction: 2010, operating hours: 13,808 h, Equipment: air conditioning, General information Doln Tzev Tuiuo A Iokl Field of application: Construction Serial number: F056742 Drivetrain Drive: Track Make of engine: C18 Weights Empty weight: 77.200 kg Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 20,8x3x3,6 Production country: DE Additional information Please contact Matthias Eyckmans, Bart Apers or Jeroen Heindryckx for more information