Used International 743 for sale (9,510)

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN Bwslswgan Uen Tz A Iol 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: new, Year of construction: 2025, NEW Mobile loading and unloading ramp with a load capacity of 10T. Technical parameters: 1.) Load capacity 10T 2.) Internal width 2.0m - external width 2,1m 3.) Length 11.3m 4.) Total weight 2.9T 5.) Height adjustment 1.1-1.8 m 5.) Fork holder for the ramp transport truck 6.) Transport wheels 7.) Plumbing The ramp floor is made of BRIDGING GRILLE, which is GALVANIZED!!!. the grating is a great advantage of this ramp, unlike ramps that have a floor made of sheet metal and steel mesh or bars placed on it. the wheels of the forklift do not slip on the ramp, and they clean themselves during the drive, which means that the floor of the loaded container or truck is not contaminated with mud or snow. ​ Bjln Terqfq Eoz A Ijwl

Condition: used, turning diameter over cross slide: 230 mm, turning diameter over bed slide: 380 mm, center height: 190 mm, center width: 1,270 mm, Center Lathe Bslnswgch Do Tz A Iswl Manufacturer: Strojimport, Type TK 380 x 1500 Technical Specifications Manufacturer: Strojimport Type: TK 380 x 1500 Year of Construction: Unknown Control: Conventional Center Distance: 1270 mm Turning Diameter over Bed: 380 mm Turning Diameter over slide 230 mm Center height 190 mm Spindle speed 45 – 2000 rpm Bed width / length / height 300 / 2120 / 305 mm Spindle bore 52 mm Dimensions: L 2.70 x W 1.00 x H 1.60 m Machine weight: 1200 kg Equipment - 3-axis digital readout - 3-jaw chuck with internal and external chucking - 2 live centers - 1 fixed center - 4 quick-change tool holders - 1 steady rest - 1 drill chuck - Machine feet All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) Bweln Tz Aewf Dzve Ijl (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2016, Serial number: WKESD0000068xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 16407 Bweln Tzevgxvxj A Ijl Specifications: - 2016 model - Air suspension - Tires (see pictures) - Inside length: approx. 1,340 cm - Internal width: approx. 251 cm - Internal height: approx. 275 cm - Net weight: 9,500 kg - 2 temp Carrier unit - Ready for delivery Description: 2016 Krone cool liner cabinet semi with 2 temp unit. Ready for delivery. Technical approved: no EU-approved until: 24.01.2024 Own weight: 9500 Total Weight: 43500 Payload: 34000 Width: 260 Length: 1404

Condition: used, mileage: 1,558,580 km, power: 385 kW (523.45 HP), first registration: 04/2000, fuel type: diesel, number of seats: 72, gearing type: automatic, emission class: euro2, color: red, brakes: retarder, Equipment: ABS, air conditioning, bathroom, onboard kitchen, parking heater, +++Engine and transmission v. 200,000-300,000km new+++ +++very clean condition+++ Engine: Mercedes-Benz Emission class: Euro 2 Gearbox: AutomaticSeats: 70+1+1 sleeping seats with lap belts Bsln Tz Aewg Np Ij Iswl _____ Safety * Retarder * Cruise control * ABS, ASR * Fog lights Passenger compartment * Auxiliary heating * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Sausage cooker * Central toilet * Leather head inserts * Driver microphone * Tour guide microphone Exterior * Trailer hitch prepared * Raising/lowering system * Power steering * Tachograph with window * Sun visor * Electric exterior mirrors * Driver door * Ski case eyelets * Central locking * Roof hatches Audio & communication * Radio / cassette * Video Other * Hubcaps * Twin tires * Tires: front: 50%, rear: 50%, rear: 40% * Vehicle dimensions: 2.55 m wide, 4.00 m high * Our internal vehicle number: 11383 Errors excepted. Images and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: good (used), Year of construction: 1995, Functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 Bslnowgai Sj Tz A Ijwl 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: new, Year of construction: 2023, operating hours: 21 h, load capacity: 4,990 kg, lifting height: 4,700 mm, free lift: 1,470 mm, mast type: triplex, power: 22 kW (29.91 HP), fork carriage width: 1,310 mm, fork length: 1,600 mm, ground clearance: 110 mm, front tire type: Vorne Continental, front tire size: 355/50-15, rear tire type: Vorne Continental, rear tire size: 21x8-9, total length: 4,470 mm, wheelbase: 2,000 mm, drive type: Elektro, construction width: 1,400 mm, net weight: 5,548 kg, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 Bjln Tzsvdxiyj A Iowl - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: new, Brand-New Machining Center HEIDENHAIN TNC 7 HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 450 mm Y-axis: 460 mm Z-axis: 500 mm Table diameter: 320 mm Maximum workpiece diameter: 400 mm Max. spindle speed: 12,000 rpm (oil-cooled) Spindle mount: SK 40-BIG PLUS (BVD 40) Max. spindle motor power: 17 kW Internal coolant supply - 20 bar Rapid traverse rates X, Y, and Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Dual gripper tool changer: 30-station (expandable up to 80 tools) Hinged belt chip conveyor Full enclosure Bsln Tzsh Ekqys A Iewl Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Bwjln Tzswf Dh Nj A Isl Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), total height: 2,865 mm, total length: 4,200 mm, throat depth: 400 mm, operating speed: 22 mm/s, table width: 120 mm, retraction speed: 200 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: Cadman Touch, power: 27 kW (36.71 HP), net weight: 11,000 kg, opening height: 400 mm, passage width: 2,600 mm, total depth: 2,725 mm, 2 buighulpmiddelen Turbo-versie Eenvoudig vorm lasermeetsysteem Lasersafe-beveiliging Capacity: 135 ton x 3100 mm Bwoljv S Anien Tz A Iol Backgauge: CNC Locking speed: 180 mm/sec

Condition: used, mileage: 686,173 km, power: 266 kW (361.66 HP), first registration: 05/2011, fuel type: diesel, number of seats: 51, gearing type: mechanical, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, onboard kitchen, parking heater, General Engine: Paccar AdBlue Emissions Standard: EURO5 Total Seats: 51 Seats: 49 + 1 + 1 sleeping seats with lap belts Standing Room: 14 Transmission: Manual Original Mileage Safety * Retarder * Cruise Control * ABS, ASR, EBS * Fog Lights * Immobilizer Passenger Compartment * Auxiliary Heating * Air Conditioning * Tables * Curtains * Luggage Racks * Luggage Nets * Jet Ventilation * Reading Lights * Double Glazing * Footrests * Kitchen * Refrigerator * Coffee Machine * Central Toilet * Leather Headrest Inserts * Tour Guide Microphone Audio, Communication, Electronics * Radio / CD * Video / DVD Exterior * Lifting/Lowering System * Power Steering * Tachograph Card * Sun Visor * Electric Exterior Mirrors * Central Locking Bjljwg Npzon Tz A Iewl * Roof Hatches * Roof Fans * Roof vent Other * German vehicle registration document * Dual tires * Vehicle length: 12.20 m * Vehicle width: 2.55 m * Vehicle height: 3.42 m * Hubcaps * Tires: Front approx. 50% * Tires: Rear approx. 50% Our internal vehicle number: 11524 Errors excepted. Images and text may differ from the actual vehicle. Over 300 vehicles are always available.

Condition: used, mileage: 483,000 km, Year of construction: 2005, Serial number: WMAN13ZZX6Y15xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20114 Boln Tswdvlkez A Iswl Specifications: Model year: 2005 Mileage: approx. 483,000 km Transmission: Manual Tires: Good tires (see pictures) Internal length: approx. 447 cm Internal height: approx. 220 cm Curb weight: 5890 kg Max payload: 1525 kg Cargo lift Engine: 205 hp Tool cabinet Side opening 2x rotor lamps Bed Radio/CD Air conditioning (AC) Description: MAN TGL 8.210 box truck from 2005 with Cargolift and 205 hp engine. The truck has good tires , side opening , 2 rotor lamps and tool cabinet . It had EU approval , but this recently expired with comments on exhaust , brakes and chassis bolt . Sold as is, so some costs will be calculated. Ready for delivery . See video for more information. Km: 483000 HK: 205 Technical approved: no EU-approved until: 19.03.2025 Own weight: 5890 Total Weight: 7490 Payload: 1525 Width: 230 Length: 700 Euro: 4 Gearbox: Manual

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 2910 mm Measurements depth 4888 mm Measurements height 2981 mm Machine weight 12000 kg Control Unit Model 310iS-A Brand FANUC Main Drive Number of spindles 1 Spindle speed range 14000 Spindle motor power 22 kW Tool taper HSK-A 63 Number of axis 4 Movement X-Axis Movement 730 mm Y-Axis Movement 730 mm Z-Axis Movement 800 mm Workpiece Workpiece weight 500 kg Bjlnjwg Icyj Tz A Ijwl Tools Max weight 12 kg Max tool diameter 70 mm Max tool length 510 mm Media Chip conveyor Yes Internal cooling Yes Cooling pressure 30 bar Additional Equipment Direct path measuring systems in XYZ-axis Core cooling of the ball screw spindles and bearings with circulating oil // Jacket cooling on spindle nose and motor High-speed blanking function Linear guides in heavy-duty design: 55 mm Renishaw OMP60 touch probe // Renishaw Inspection Plus Automatic override of the corners: G62 Restart after programme interruption User macro with 600 variables Flow monitor for coolant through the spindle This 4-axis Makino A61nx horizontal machining center was manufactured in 2015. It features a robust spindle with speeds up to 14,000 min-¹, a torque of 240 Nm, and a power of 30 kW. The machine includes a high-capacity tool magazine with storage for 60 tools and rapid tool change times. Ideal for heavy-duty machining with a pallet size of 500 × 500 mm and maximum workpiece weight of 700 kg. For more information about this horizontal machining center, please reach out to us. Application Types Milling

Condition: new, Brand New Machining Center HEIDENHAIN TNC 640 Digital Contouring Control HEIDENHAIN Package (Motors, Encoders, and Handwheel) X-Axis: 1,430 mm Y-Axis: 670 mm Z-Axis: 640 mm Table Size: 1,500 x 620 mm Table Load Capacity: 1,200 kg Spindle Speed: 10,000 rpm (Oil-Cooled) Spindle Mount: SK 40-BIG PLUS (BVD 40) Maximum Spindle Motor Power: 32 kW Internal Coolant Supply - 20 bar Rapid Traverse: 30,000 mm/min Positioning Accuracy: ± 0.005 mm Repeat Accuracy: ± 0.003 mm Tool Changer: 30-station Hinged belt chip conveyor 4th axis preparation (rotary table) Fully enclosed Only inquiries from Germany will be answered /// Only inquiries from Germany will be processed Bweln Tehy Atfsz A Ijl

Condition: used, Year of construction: 2017, x-travel 750 mm y-travel 650 mm z-travel 560 mm Bwjln Tz Asvw Dwve Iel Control 3D HEIDENHAIN TNC 640 table-size 800x650 mm rotary table 650 mm table weight 600 Kg c-axis ° b-axis -120+120 ° Tool diameter 840 mm toolpiece height max. 500 mm rapid taverse 40.000 mm turning speeds 20.000 U/min Tool adapter HSK-A63 Torque 130/86 0 engine output 35 kW Internal cooling system 40 bar Machine on 26.972 Spindle hours 11.412 h total power requirement 49 kW weight of the machine ca. 11.600 kg -Tool charger -No. Positions in the tool charger 60 -Tank with 500l paper filter -Active refrigerator cabinet -Infrared measuring probe Heidenhain piece -Blum laser probe measuring device -chip extractor -Cleaning gun with 2 bar 40 l/min pump -3D quick set -HEIDENHAIN HR-510 Portable Steering Wheel

Condition: ready for operation (used), chuck outer diameter: 1,400 mm, total height: 4,100 mm, net weight: 20,000 kg, Type: Stanko 1516 Maximale werkstukhoogte: 1000 mm Verticale schuifmaat Maximale horizontale slak: 950 mm Maximale verticale slak: 700 mm Horizontale schuifmaat Maximale horizontale slak: 630 mm Maximale verticale slak: 1000 mm Dwarsbalk maximale slak: 660 mm Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Bslov Sftzen Tz A Iowl Long: 3170 mm Wide: 3030 mm

Condition: new, Functionality: fully functional, fuel type: diesel, color: white, axle configuration: 6x2, fuel: diesel, wheelbase: 4,800 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, navigation system, onboard computer, parking heater, retarder, sleeping cabin, traction control, trailer coupling, Internal number for inquiries: 1-578 VEHICLE IS FULLY ASSEMBLED AND AVAILABLE IMMEDIATELY! ADR equipment!!!! IVECO S-WAY 490 construction material vehicle with Fassi F195 2.24 loading crane Slewing range 400° Double toggle system with PROL1NK (overextendable articulated boom up to 15°) Electronic overload cut-off device Fassi RCS radio maxi - 6 functions » with 3 joysticks (2-2-2) Emergency stop and visual alarm (90% and 100%) including adjustable digital slewing limiter FASSI FSC stability control including LMB II Control system for 2 additional functions with »2 hose guides / e-dynamic with 4-way extension in stock, other cranes at an additional cost. Body: Flatbed: Dimensions 6600x2480x1000 mm, side walls divided once (2 flaps) per side, with side wall support Substructure: Hot-dip galvanized mesh frame Perforated frame for good load securing Toolbox Beln Tzewf Nqco A Iewl Vehicle: Cab: Active Space, large-capacity cab Engine: Cursor 13, 490 hp Euro VI Transmission: 12-speed HiTroniX, automated Retarder/Intarder for ZF transmission Wheelbase 4800 mm Suspension: Leaf/air Steered and liftable trailing axle, single tires Tires: Front axle 385/65 R22.5 Rear axle + Rear axle 315/80 R22.5 Electric pop-up roof Hill holder for comfortable starting on inclines Electronic Stability Program (ESP) Lane Departure Warning System (LDWS) Emergency Brake Assist (AEBS) Rocking Mode (Free-Rocking Mode) Electric cab tilting system. Multi-adjustable, air-suspended Hl-Comfort driver's seat with integrated headrest and height-adjustable seat belt. Lumbar support with 3-stage cooling or heating function. Fully automatic air conditioning in conjunction with parking air conditioner. Premium refrigerator with freezer compartment including thermal insulation box, 2 USB sockets, 1 230V socket. Axle load indicator in the instrument cluster. Leather-wrapped steering wheel with function buttons for radio, telephone, and menu navigation. Full LED. LED taillights, fog lights including cornering lights, LED front headlights. and much more. In-stock vehicle. Financing/hire purchase, as well as leasing/partial amortization leasing are available with our leasing partner. Our sales team will be happy to answer any further questions you may have. This is a non-binding offer. Subject to prior sale, errors, and changes. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: used, mileage: 579,656 km, Year of construction: 2011, Field of application: Freight transport Serial number: YV2AP90D4BA704485/SA93136MCET11xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20220 Specifications car: - 2011 model - Eu-approved until: 03.02.26 - 579,656 km - I-shift - Euro 5 engine - 6x4 - Changed Swivel disc 1 year ago - Movable Swivel disc - Hydraulics - Suspension: full air - 700 hp - 2 Berths - Pressure relief - Tires (see pictures) - Air conditioning/ac - Extra Lights - Cow catcher - Radio - Ready for delivery Beln Tzswdvdtj A Ijwl Specifications Trailer: - 2015 model - Eu-approved until: 03.02.26 - 3 Axles - Hydraulic drawbars - Steering on 3 axles - Lock on the 3 axle swing does not work - Interior dimensions 2 sceene: 3.234 m - Internal dimensions 1 sceene: 8.900 m - Tires (see pictures) - Ready for delivery Description: We have a 2011 Volvo FH16 6x4 Tractor with hydraulics and 2015 McCauley Mac Maskinsemi w/ hydraulic drive bridges for sale. The set is sold together and is Eu-approved. The lock for the steering on the 3rd axle does not work as it should on the trailer. Otherwise, everything should work as it should according to the owner. Ready for delivery. Km: 579656 HK: 700 Technical approved: Yes EU-approved until: 03.02.2026 Own weight: 10980 Total Weight: 31000 Payload: 19945 Width: 255 Length: 709 Euro: 5

Condition: used, Year of construction: 2013, Functionality: fully functional, machine/vehicle number: H-H30888, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Type: "VMX 30i" equipped with WinMax control, chip conveyor, internal cooling, spindle cooling On request Bwoln Tswgdd Hoz A Iol CNC configuration: − NC production package − Industrial standard NC − Pocket with islands − Helix − Synchronous thread − Surface selection − Tool & material database − Ultimonitor Machine configuration: Table clamping area 510 x 1020 mm Travel paths X-axis Y-axis Z-axis 760 mm 510 mm 610 mm Spindle mount SK 40 24-station tool changer Infinitely variable spindle speed 12,000 rpm Rapid traverse 35,000 mm/min Contour feed 15,240 mm/min Space requirement 3,900 x 4100 x 2800 mm Transport dimensions 2300 x 2300 x 2550 mm Weight 5 tons The machine is connected to the power grid and can be inspected with power on by appointment. Technical specifications and dimensions: Errors excepted. Prices are quoted: plus VAT, ex warehouse, freight prepaid. Delivery time: immediately available from stock, subject to prior sale. Payment: Advance payment. Sincerely, Wiegand

Condition: new, BRAND NEW MACHINE HEIDENHAIN TNC 640 Digital Contouring Control HEIDENHAIN package (motors, encoders, and handwheel) X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm Rotary table: 1,600 x 1,200 mm Maximum workpiece weight: 6,000 kg Automatic universal swivel head 1° x 1° (optional with fixed spindle Ø 210 mm) Spindle mount: SK50 DIN 69871/A Max. spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW Internal coolant supply - 36 bar Rapid traverse X, Y & Z: 30 m/min Bwslnjq I Ncqj Tz A Iel Positioning accuracy: 0.015 mm Repeatability: 0.010 mm 40-station tool changer 2 x longitudinal hinged chip conveyors Perimetric cover Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed

Year of construction: 2000, Condition: used, Functionality: fully functional, Internal broaching machine Bolnjtpmnre Tz A Ijwl Make: Arthur Klink Type: RISH 10x1000x400 Year of construction: 2000

Condition: ready for operation (used), controller model: Siemens Sinumerik 810D, total length: 3,650 mm, total width: 1,738 mm, total height: 1,900 mm, net weight: 5,250 kg, swing diameter over cross slide: 750 mm, C-as lineaire meting in X-as 12 grondstoffen - VDI - max 4000 tpm Inclusief spaantransportband RS232 Swing over bed: 630 mm Max longitudinal travel Z-axis: 500 mm Max cross travel X-axis: 320 mm Spindle cone: A2-8 Dia of spindle bore: 92 mm Boln Tov Sfq Hoz A Iswl Power on the spindle: 18,5/22 kW Number of speeds: 2 > 3000 rpm Total power needed: 52 kVa Chuck: Rohm dia 254 mm Toolchanger: yes, Sauter Number of tools: 12 driven positions

Condition: new, BRAND NEW MACHINE HEIDENHAIN TNC 640 Digital Contouring Control HEIDENHAIN package (motors, encoders, and handwheel) X-axis: 4,000 mm Z-axis: 2,000 mm Y-axis / Cross-arm: 1,500 mm V-axis / Cross-column: 1,000 mm Beln Tz Aeq I Nlyo Iowl Rotary table (C-axis): 2,195 x 2,195 mm Max. load capacity up to 20,000 kg Automatic universal swivel head 1° x 1° (optional with fixed spindle Ø 210 mm) Spindle mount: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW Internal coolant supply - 36 bar Rapid traverse speeds X, Y, V & Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-station Double-hinge chip conveyor (longitudinal) Perimetric enclosure Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed

Condition: new, Brand new bed-type milling machine with integrated rotary table HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, encoders, and handwheel) X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm Table size: 3,100 x 1,100 mm (including integrated rotary table Ø 1,100 mm) Automatic universal swivel head 1° x 1° Spindle mount: SK 50 DIN 69871/A Max. spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 38 kW Internal coolant supply - 36 bar Bwoln Tzjm Tv Iis A Iol Rapid traverse X, Y & Z: 30 m/min Positioning accuracy: 0.030 mm Repeatability: 0.010 mm Tool changer: 40-station (optional up to 150 tools) 2 x longitudinal hinged chip conveyors Perimetric enclosure Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed