Used International 744 for sale (9,723)

Condition: ready for operation (used), Functionality: fully functional, Buffer storage tank / stratified storage tank made of steel, insulated, standing on feet. Technical data / dimensions Available quantity: 1 Volume: approx. 60,000 liters Tank type: Pressure tank Condition: used Suitable for food: no Dksln Ubfotwfxletel Design: upright Diameter inside: approx. 2,800 mm External diameter: approx. 3,000 mm Cylindrical height: approx. 8,880 mm Total height: approx. 10,380 mm Specific weight of the medium: 1.0 to/m³ Operating pressure: Overpressure Operating pressure: 6 bar Test pressure: 7.8 bar Wall thickness underfloor: approx. 12 mm Wall thickness top: approx. 11 mm Wall thickness jacket / cylinder: approx. 8 mm Ground clearance: approx. 300 mm Operating temperature: 60 degrees Celsius Material / composition Material inner casing: steel Feet material: Steel Insulation Insulation available Insulation thickness: approx. 100 mm Insulation material: Mineral wool Insulating jacket material: Galvanized steel Insulating jacket: screwed/riveted Notes: The insulation and the associated insulation cladding are damaged and may need to be be renewed/replaced. If you are interested, we will be happy to offer for the renewal of the insulation. The underside of the tank is not insulated. Equipment Stand form: Feet Number: 4 Width: approx. 400 mm Length: approx. 400 mm Top shelf type: Dished base Bottom shelf type: dished floor Top shelf: 2 x crane eyes 1 x flange socket DN 25 Jacket: 1 x steel pipe (26.9 x 2.6 mm), pulled down from the top floor 2 x flange DN 125 with internal distributor pipe 6 x immersion sleeves with temperature sensor incl. cable protection tube 2 x crane eyes Underfloor: 1 x outlet flange NW 50, pulled to the front 1 x oval manhole (320 x 420 mm) with insulating cover Documentation: Drawing

Condition: excellent (used), Year of construction: 2013, operating hours: 42,160 h, Functionality: fully functional, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Arburg 1500T 2000-400 rotary table vertical machine Machine no. 225999 You can find the complete equipment on the downloadable documents - machine card Control: Selogica « Year of manufacture, 2013 * Total machine cycles only 1,907,296 « Operating hours automatic 42160 Clamping unit Plate spacing: 700 mm Clamping force: 200 to/ 200 kN Tool installation height: 400 mm Table diameter: 1500 mm Angle of rotation: 180° Rotation time: 2.4 s min. Weight on rotary table: 1050 kg Ejector force: 45 kN/ 175 mm ejector travel Injection unit Screw diameter: 40 mm Displacement: 201 cc Injection weight: 184 gr. Injection pressure: 2000 bar Extras « 2-station rotary table 180° forward/backward alternating with servo-electric rotary drive and hydraulic fixing pin for fine centering of the rotary plate in the end position; separating protection between the closing and insertion area, height adjustable on the rotary plate to the tool bases, with the option of attaching media lines and connections for the tool bases - Rotary table diameter mm 1500 - Closing force max. kN 2000 Injection unit according to EUROMAP 400 Screw diameter 40mm Special model rotary table ergonomic design with the following features: © - Corrosion protection treatment for rotary table (VE 574/90) © - Water connections 2 circuits © -3 hydraulic connections for needle closure system © -3 x core pull © -Per station: one core pull and 2 x temperature control © -6 x tool temperature control © -12 zone tool heating circuits © -Kistler internal pressure sensors (2x) Dsln Uouuf Iasbftjkl © -Temperature query for start-up parts Weight: 11,200 kg. Energy: 22KW motor - heating power: 9.4 KW 5 zones - connection value 100 A the machine is offered functionally tested fully functional with commissioning guarantee - tested before dismantling For information about the machines we offer and our company - we only sell our own machines purchased from ongoing production from our Hanover warehouse - all machines offered are checked and tested before dismantling - we do NOT sell insolvency goods - we are NOT an agent who deals with third-party property. - all machines offered come from successful companies for which maintenance and care is a matter of course - all machines offered can be viewed in our warehouse

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 7400 mm Measurements depth 5000 mm Measurements height 3300 mm Machine weight 6600 kg Control Unit Brand SIEMENS Model SINUMERIK 840 D Movement X-Axis Movement 520 mm X-Axis Working Feed 1 – 10000 mm/min X-Axis Feed Force 4000 N X-Axis Rapid Traverse 60 m/min Y-Axis Movement 400 mm Y-Axis Working Feed 1 – 10000 mm/min Y-Axis Feed Force 4000 N Dkelnou Ha Dzj Ubftel Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 360 mm Z-Axis Working Feed 1 – 10000 mm/min Z-Axis Feed Force 8000 N Z-Axis Rapid Traverse 60 m/min Tools Slots in storage 42 Max tool diameter 125 mm Max tool length 250 mm Clamping Unit Clamping force 8000 N Media Chip conveyor Yes Additional Equipment Bar Loader Magazine IRCO RBK 8008 Short Bar Loader Coolant System with Belt Filter for IKZ Internal Tool Cooling Hornbeam Feed Various Tool Holders Machine Manuals This 7-axis STAMA MC 526/M was manufactured in 2005, featuring a Siemens Sinumerik 840 D control system. It includes a milling spindle with a speed of 10,500 rpm and a turning spindle speed of 5,000 rpm. The machine offers a tool magazine with 132 tools capacity and rapid traverse rates up to 60 m/min. Ideal for complex milling and turning tasks. If you are looking to get high-quality milling and turning capabilities consider the STAMA MC 526/M machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 04/2018, Year of construction: 2018, total width: 2,460 mm, total height: 2,650 mm, ID: 3872-816844 All our vehicles and the latest offers - Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets Dksln Ubfswd Dqbotel

Year of construction: 2018, Condition: like new (used), Memmert HCP 105 climatic chamber as new. Manufacturer's description: Memmert HCP series climatic chambers are designed for long-term tests at controlled temperature and humidity, including stability tests and conditioning of material samples before other tests. Perfect simulation of the environment in a humidity chamber The chamber offers a full range of comfort, reliability and safety. It has active humidity control in the range of 20% to 95% relative humidity and unparalleled temperature and humidity uniformity throughout the interior. The chamber is suitable for environmental tests, environmental simulations, accelerated life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78. Temperature range up to +90°C available, 4 model sizes (capacity from 56 to 241 litres), 1 model variant: TwinDISPLAY, Active humidity control 20 to 95% RH, Double doors as standard: 1. Prevention of contamination, 2. Prevention of temperature drops or increases, 3. Optimum view of the sensitive chamber load thanks to the heated internal glass door with a large surface area. Humid environment without condensation, Active humidity control ensures ideal temperature and humidity uniformity and short temperature recovery times after opening the door. Virtually maintenance-free climate chamber. In combination with heating on all six sides, including the heated internal glass door, evaporation in the interior is minimised, and thus the risk of condensed water dripping onto the test item. The aluminium heat-conducting layer supports optimum temperature distribution and serves as a heat accumulator in the event of a temporary power failure. Convenient equipment for accelerated life tests To ensure that environmental tests and accelerated life tests such as 85/85 tests run reliably and safely, the HCP humidity cabinet offers a wide range of comfort features: Dksljwhxx Isn Ubftel Standard feedthrough in the rear wall, Battery-buffered ControlCOCKPIT (option), The process run time starts with the SetpointWAIT function only after the set temperature has been reached, Alarm messages can be sent via e-mail or SMS using MobileALERT (option) and many more. The Memmert humidity chamber offers unique advantages Intuitive and easy-to-use menu, Heating concept specially adapted to precise and uniform temperature control, A wide range of programming options and documentation of different temperature/humidity profiles using the AtmoCONTROL software, Alarm functions, triple overheating protection and simultaneous display of all parameters ensure the safety of samples and cell cultures Almost exclusive use of high-quality and easy-to-clean stainless steel for the working chamber and housing, 3-year worldwide warranty. Working temperature and humidity range HCP,

Condition: new, CATALOGUE NUMBER M0261 TECHNICAL DATA number of spindles 21 distance between first and last drill 640mm distance between the centers of individual spindles 32mm max size of the workpiece 50 x 915 x 3000mm max drilling depth 65mm number of pneumatic clamps 2 height of the drill's working table 860mm max height of clamps above the table 70mm working pressure 6-7bar air consumption 10l/cycle engine power 1.5kW noise level 76.1dB speed 2800rpm dimensions length/width/height 1030/1030/1285mm weight 275kg PRODUCT FEATURES Main features of the machine: - Single-head drill for drilling in the range of 0 - 90 ° - Pneumatically adjustable head angle - Cast iron fences - Spindles adapted to quick connectors - Patented pneumatic material clamps - Cast iron work table - Quick and precise adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers 1.5 m long (right and left) with two stoppers - 5 quick connectors - Wooden box securing the machine during transport. ADVANTAGES - vertical/horizontal/angle drilling - multi-spindle - new machine - CE certificate - solid - professional Net price: PLN 16,400 Net price: EUR 3,950 Net price calculated according to the exchange rate of PLN 4.15/EUR (with larger exchange rate fluctuations, the price may change) - we send machines to every corner of the country - possibility of leaving another machine in the settlement. Dsln Usdpcfljbftekl The prices given are net prices. The net price given for international transactions, customers from the EU with an EU tax identification number. Before placing an order for a new product, please confirm the availability and current price.

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. Dkslsvmz Idon Ubftjl A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Year of construction: 1996, operating hours: 32,750 h, Condition: good (used), full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +++1. Aggregat+++ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar Dkeln Ubfscud Nhetsl 4 x heating zones +++2.Aggregat+++ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumulator core pull water battery hopper Dimensions /Elektric Motor 30 KW Heating 11,7 KW weight: 5100 kg dimensions: 4,5 x 1,5 x 2,5 (LxBxT) Painting: RAL 7016, 7035, 1012 available available now at our storage Hannover/Germany all our offered machines are in our own property

Condition: like new (used), Functionality: fully functional, mileage: 152,286 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, overall weight: 3,500 kg, emission class: euro6, energy efficiency: B, color: white, driver cabin: other, suspension: steel, number of seats: 3, Equipment: ABS, air conditioning, central locking, VOLKSWAGEN CRAFTER 35 2.0 TDI 140CV PL-SL-TA- EURO 6B- YEAR 2018- KM 152286- CC 1968- CV 104- KW 103- INTERNAL LENGTH 4180 mm- WIDTH 1760 mm- INTERNAL HEIGHT 1910 mm- PAYLOAD 1306 kg- ABS- AIR CONDITIONING- CENTRAL LOCKING- CABIN SEATS 2- ELECTRIC MIRRORS- ELECTRIC WINDOWS- STEERING WHEEL CONTROLS- RACK- FOR INFO FRANCESCO 3356514297 Djln Ubjwhvl Sjftskl

Condition: used, mileage: 443,054 km, power: 331 kW (450.03 HP), first registration: 01/2018, overall weight: 20,500 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, next inspection (TÜV): 05/2027, gearing type: semi-automatic, emission class: euro6, Year of construction: 2018, Equipment: air conditioning, Internal vehicle number: G300176 German vehicle In our yard in Kaufungen, available immediately More information from Luis Lucena Curb weight 7,335 kg with hydraulic tipping Leaf - air suspension Automatic with Opticruise clutch 4x2 450 HP Errors excepted We are happy to accept your used vehicle as part payment. Financing is available directly from us. GOLEC NUTZFAHRZEUGE GMBH Dolewg Nqfjn Ubftjkl We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ---

Condition: new, CATALOGUE NUMBER RE022 – new machine, in stock Doln Uod Sg Hxjbftokl – DTR + CE documentation – cutting width at the guide 1300mm – main engine 6kW TECHNICAL DATA - saw blade tilt 0-46˚ - main engine power 6kW - cutting length on the carriage 3000mm - main spindle speed 3500/4500rpm - spindle diameter 30mm - main blade diameter 300-400mm - max. scoring diameter 125mm - scoring engine power 0.75kW - scoring speed 8500rpm - spindle diameter 20mm - cutting width at the guide (standard 1050mm, option 1300mm) 1300mm - sawing width using bumpers on the auxiliary table 215-3200mm - cutting height for 300mm 90°/45° 90/60mm - cutting height for 350mm 90°/45° 5-115 / 3.5-80mm - cutting height for 400mm 90°/45° 25-140 / 15.5-95mm - diameter of the exhaust port 80mm, 125mm - dimensions length/width/height 3300/3460/1500mm - weight 750kg Optional equipment: - angle ruler - with aluminum strip - additional support table - additional start/stop in the formatting table - electronic cutting width reader on the longitudinal ruler - electronic cutting width reader on the auxiliary table - formatting table 3200mm, 3900mm, 2500mm Net price: PLN 41,550 Net price: EUR 9,890 Net price calculated according to the exchange rate of PLN 4.20/EUR (with larger exchange rate fluctuations, the price may change) The prices given are net prices. Net price given for international transactions, customers from the EU with an EU tax identification number.

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight approx. 8,000 kg Dkolnohh Spre Ubftsl Material: steel material S 235 JRG 2 Underground tank for underground storage, single or double-walled, suitable for walkable and driveable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used, immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire department coupling / fixed coupling A according to DIN 14319 in design form B without dipstick - Vent flange nozzle in NWN 100 with cap with a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground - Coated with a bitumen coating on the outside for protection - On request, we can provide the tank with a full internal coating on a bitumen basis or an epoxy resin internal coating (against corrosion) - It is also possible to line the tank with a plastic inner shell A cost-effective delivery with your own truck is possible. Simply let us know the delivery location and you will then receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers of all kinds is possible, just contact us. We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: used, mileage: 514,312 km, power: 331 kW (450.03 HP), first registration: 04/2019, overall weight: 19,000 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, next inspection (TÜV): 05/2027, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: air conditioning, Internal vehicle number: G300175 German vehicle In our yard in Kaufungen, available immediately. More information from Luis Lucena. Curb weight 7,335 kg with hydraulic tipping system Leaf - air suspension Automatic transmission with Opticruise clutch 4x2 450 HP Errors excepted. Djln Ubfswg Np Ustekl We are happy to accept your used vehicle as part payment. Financing is available directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ---

Condition: excellent (used), Catalog number 7447 TECHNICAL DATA - max cutting height 150mm - max cutting width 510mm - max saw diameter 450mm - blade bore 70mm - shaft diameter 70mm Dksloug Ul Ren Ubftjl *from above: - pawls - 2 smooth, slipping shafts - slipping shaft, smooth *from below: - 4 smooth, slipping input rollers - toothed pulling shaft - shaft with saws - toothed pulling shaft - 4 smooth, slipping output rollers - smooth feed speed adjustment - feed motor approx. 3kW - main motor 37kW - diameter of the extraction nozzle 150mm - overall dimensions L/W/H 3900x1750x1500mm - weight 1400kg ADVANTAGES - Polish production - DTR documentation - used multisaw, very good condition Net price: PLN 24,900 Net price: EUR 5,850 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2019, Filter tank / gravel filter tank made of stainless steel (V2A), unused Technical data / dimensions Available quantity: 2 Volume: approx. 21,800 liters Tank type: Pressure tank Condition: unused Suitable for food: yes Design: upright Diameter inside: approx. 2,384 mm External diameter: approx. 2,396 mm Cylindrical height: approx. 4,000 mm Total height: approx. 6,576 mm Operating pressure: Overpressure Operating pressure: 6 bar Test pressure: 8 bar Wall thickness bottom: approx. 7 mm Wall thickness top: approx. 8 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 1,114 mm Operating temperature: 35 degrees Celsius Notes: Filter tank (gravel/water) with nozzle base, Filter area: approx. 4.5 m² Dsln Uety Tidjbftekl Material / properties Material inner casing: V2A (1.4301) Feet material: V2A (1.4301) Surface outside: Glass bead blasted Surface inside: Rolled bright (2B) Features Stand shape: Feet Number: 4 Fastening: fixed Top shelf type: Basket arch base Bottom shelf type: Basket arch shelf Shelf type: Basket arch shelf Top floor: 1 x flange DN 600 with hinged cover 1 x DN 150 hole in the hinged cover 2 x crane eye Jacket: 1 x flange DN 200 with internal distributor pipe with 3 inlet nozzles 1 x type plate 1 x DN 500 manhole with hinged cover 1 x flange DN 100 in the cover of the manhole flange Underbody: 1 x flange DN 600 with hinged cover 1 x flange DN 100 in the cover Internal: 1 x nozzle base with filter nozzles (filter area approx. 4.5 m²) Documentation Drawing Test certificate Other: Material certificates Manufacturer's declaration

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, Catalog number 7442 TECHNICAL DATA - inlet width 410mm - inlet height 120mm - shaft width 430mm - shaft diameter 400mm - number of knives 2pcs - sieve size 60x60mm - top pulling shaft, toothed - bottom 2 pulling shafts, toothed - feed belt length 4100mm - feed belt width 400mm - auto reverse - main engine 30kW - feed motor 2×1.5kW - machine dimensions L/W/H 2300x1550x1500mm - feeder dimensions L/W/H 4400x500x1000mm Deln Ubjufxlrjftjkl - weight 2135kg ADVANTAGES – Polish production – auto reverse – with conveyor belt - DTR documentation - used chipper, very good condition Net price: PLN 79,900 Net price: EUR 18,800 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Equipment: type plate available, 18 x sparkling wine pressure tank/storage tank made of V2A, 8 bar, with lateral agitator mixer - second-hand - used Manufacturer: Rieger Volume approx. 52,100 liters Diameter approx. 3,250 mm cyl. height approx. 5,500 mm Total height approx. 8,000 mm Cylinder wall thickness: 11 mm Operating pressure: 8 bar Working temperature: 20 C° Internal surface: 2B=IIIC ground Surface outside: marbled Top shelf: dished bottom 3 crane eyes CIP line DN 50 drawn downwards with flange connection with pressure line DN 25 5 saddle feet Tank cylinder: Manhole oval 350 x 450 mm 1/2" sample tap with flange connection Clear drain DN 65 with angle seat valve Lateral agitator mixer, type: propeller at 315° from the manhole Djlstvg Uyen Ubftekl Complete champagne pressure fitting with safety valve, pressure gauge, vacuum valve and DN 25 angle seat valve Underbody: dished bottom Residual drain pipe pulled forward in the middle, flush with the tank DN 65 with angle seat valve 6 sturdy with height-adjustable spherical feet and sturdy washers 9 basic tanks and 9 saddle tanks are available otherwise as per photos

Condition: excellent (used), Catalog number 7445 TECHNICAL DATA - track width 250mm - shaft width 400mm - max. disc diameter 400mm - disc hole diameter 80mm - max. cutting height 140mm - table top width with clearance 730mm - table top length 2120mm *from above: - pawls - smooth pressure shaft - pawls - smooth pressure shaft - shaft with saws - 2 smooth pressure shafts Dksln Ueug Ugujbftel from below: - guide - smooth sliding shaft - pawls - caterpillar - central lubrication - 2 lasers - smooth feed speed adjustment - feed motor 1.1kW - main motor 37kW - electric lifting of the body 0.75kW - electric lifting of the shaft with saws 0.75kW - diameter of the exhaust nozzle 200mm - overall dimensions length/width/height 2200x1850x2100mm - weight about 3000kg ADVANTAGES - German production - laser - electric lifting of the body and shaft - smooth regulation of the feed speed - used multi-saw, very good condition Net price: PLN 119,900 Net price: EUR 28,200 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2010, Sterile tank with agitator, temperature-controlled, upright Technical data / dimensions Available quantity: 1 Volume: approx. 6,000 liters Container type: Sterile tank Condition: used Suitable for food: yes Djlnjtyz Izo Ubftokl Design: upright Diameter inside: approx. 1,700 mm External diameter: approx. 1,854 mm Cylindrical height: approx. 2,264 mm Total height: approx. 5,390 mm Weight: approx. 2,030 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: negative pressure/vacuum Operating pressure: 3.5 bar Test pressure: 5.4 bar Wall thickness bottom: approx. 5.2 mm Wall thickness top: approx. 8.4 mm Wall thickness jacket / cylinder: approx. 5.2 mm Ground clearance: approx. 800 mm Operating temperature: 150 degrees Celsius Type plate available Manufacturer: GEA serial no.: 2376 Year of construction: 2010 Material / condition Material inner jacket: V2A (1.4541) Material double jacket: V2A (1.4541) Feet material: V2A (1.4541) Outer surface: bright rolled 2B Internal surface: Ground Ra

Condition: excellent (used), Catalog number 7446 TECHNICAL DATA - track width 340mm - shaft width 400mm - max. disc diameter 350mm - disc hole diameter 80mm - max. cutting height 120mm - table top width with clearance 700mm - table top length 1720mm *from above: Dkjln Uboug Ulqsftsl - pawls - metal sliding pressure shaft - pawls - metal sliding pressure shaft - shaft with saws - metal sliding, pressure shaft 2pcs *from below: - guide bar - metal sliding shaft - pawls - caterpillar - central lubrication - smooth feed speed adjustment 1.5kW - main engine 37kW - diameter of the exhaust port 240mm - total dimensions length/width/height 1900x1750x1980mm - weight about 3000kg ADVANTAGES - German production - smooth speed regulation - insert for short elements - used multisaw, very good condition Net price: PLN 89,900 Net price: EUR 21,150 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Technical Data / Dimensions Available Quantity: 2 Volume: approx. 115,000 liters Container Type: Silo Condition: Used Food Grade: No Design: Vertical Internal Diameter: approx. 3,000 mm Cylindrical Height: approx. 15,600 mm Total Height: approx. 18,000 mm Weight: approx. 2,700 kg Specific Weight of Medium: 0.6 t/m³ Operating Pressure: Unpressurized Ground Clearance: approx. 1,000 mm Material / Properties Inner Casing Material: Aluminum Notes: Material: AlMg3 / AlMgSi Standing Type: Base Ring/Stand Frame Fastening: Fixed Top Bottom Type: Conical Grade: approx. 15% Bottom Bottom Type: Conical Conical Inclination: 90 degrees Top Bottom: Deln Uowdr Twebftjkl 1 x Roof edge railing, height: 1,200 mm 2 x crane eyelets 1 x flanged connection DN 80 (filling) 1 x flanged connection for silo pilot 1 x venting connection Various connections for measurement and control technology Shell: 1 x service room door (approx. 1,800 x 850 mm) 1 x cable conduit 1 x filling line DN 80 8 x pipe holders Subfloor: The silos end at the bottom in a 90° cone with a flange

Condition: good (used), Agitator bowl made of stainless steel (V2A), horizontal Technical data / dimensions Available quantity: 2 Volume: approx. 15,000 liters Tank type: Agitator tank Condition: used Suitable for food: yes Design: horizontal above ground Internal diameter: approx. 2,000 mm Cylindrical length: approx. 4,500 mm Total length: approx. 5,300 mm Specific weight of the medium: 1.05 to/m³ Operating pressure: unpressurized Wall thickness of bottom: approx. 2.3 mm Wall thickness shell / cylinder: approx. 2 mm Remarks: Mash tun Material / composition Material inner jacket: V2A (1.4301) Feet material: V2A (1.4301) External surface: Front base Dslnjty Np He Ubftjkl Features Base shape: Profile feet Number: 6 Fastening: fixed Base type: dished base Front shelf: 1 x oval manhole (approx. 430 x 330 mm) 1 x residual drain DN 80 1 x bearing for agitator shaft Jacket: 1 x manhole with hinged cover and DN 50 vent nozzle Rear base: 1 x agitator motor Notes: An optional catwalk is available for the two containers available for the two containers, with which the two containers can be walked on (surcharge: 450 €). Agitator Agitator available Type of agitator: Beam agitator Classification: Slow speed Quantity: 1 Installation: lateral Speed: 1,450 rpm Agitator power: 4.8 kW Bottom bearing for agitator shaft available Manufacturer: Leroy Somer Notes: Agitator shaft passes horizontally through the center of the tank

Condition: used, Technical Data / Dimensions Available Quantity: 2 Volume: approx. 115,000 liters Container Type: Silo Condition: Used Food Grade: No Design: Vertical Internal Diameter: approx. 3,000 mm Cylindrical Height: approx. 15,600 mm Total Height: approx. 18,000 mm Weight: approx. 2,700 kg Specific Weight of Medium: 0.6 t/m³ Operating Pressure: Unpressurized Ground Clearance: approx. 1,000 mm Material / Properties Inner Casing Material: Aluminum Notes: Material: AlMg3 / AlMgSi Standing Type: Base Ring/Stand Frame Fastening: Fixed Top Bottom Type: Conical Grade: approx. 15% Bottom Bottom Type: Conical Conical Inclination: 90 degrees Top Bottom: 1 x Roof edge railing, height: 1,200 mm 2 x crane eyelets 1 x flanged connection DN 80 (filling) 1 x flanged connection for silo pilot 1 x venting connection Various connections for measurement and control technology Shell: Deln Uswfrgyjbftokl 1 x service room door (approx. 1,800 x 850 mm) 1 x cable conduit 1 x filling line DN 80 8 x pipe holders Subfloor: The silos end at the bottom in a 90° cone with a flange

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 20,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 20,000 liters / 20 m³ Length: approx. 6,840 mm Diameter: approx. 2,000 mm Weight approx. 3,500 kg Dkoln Ubsvmz D Esftel Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick nozzle. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. Of course, we always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 30,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 30,000 liters / 30 m³ Dkeln Uevmz Hajbftol Length: approx. 9,940 mm Diameter: approx. 2,000 mm Weight approx. 5,000 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick nozzle. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 40,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters