Used International 1455 for sale (9,417)

Condition: new, A vertical band saw is an asset to any workshop that processes steel. Sawing, notching and separating external and internal contours - the models in the VB A series are designed for all-round use and are characterized by their rigid construction, stable work table and variable belt guides Bweleqhkkzjraqbbjl

Condition: used, Year of construction: 2013, Serial number: YG9511307D303xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20105   3 axles Lift on axle 1 Swing on axle 3 Good condition with tires, see pictures Air suspension Standard height inside 410-450 cm in height Interior length 1347 cm Internal width 247 cm Total length 1385 cm Wheelbase 136/255 cm Width 255 cm Ready for delivery Technical approved: Yes EU-approved until: 19.09.2025 Own weight: 9900 Bwelrewdvkmoaqbbol Total Weight: 45000 Payload: 35100 Width: 255 Length: 1385

Condition: good (used), Year of construction: 2004, Technical details x-travel 1300 mm y-travel 1100 mm z-travel 1000 mm Control Mazatrol PC Fusion 640 M total power requirement 64,6 kVA weight of the machine ca. 24 t Additional information Equipment: CNC control Mazak Mazatrol PC Fusion 640 M With Performance CNC package EIA / ISO conversion Internal coolant supply through the work spindle with 70 bar pump pressure but without coolant tank. Preparation of measuring device for Renishaw Tool length measurement up to 600 mm With 10-fold pallet changer PALLETECH B-axis 360° x 1° (deg) Tool changer 240-fold TOOL-HIVE (modified to 50% higher speed) Max. tool length 652 mm Max. tool diameter 135 mm, with free adjacent space 260 mm Tool weight 30 kg Chip conveyor Machine documentation Technical data: Max. workpiece diameter (interference circle) diameter 1250 mm Max. workpiece height 1250 mm Transverse movement of the column, X-axis 1300 mm Vertical movement of the spindle head, Y-axis 1100 mm Longitudinal movement of the table, Z-axis 1000 mm Distance from spindle center to pallet center 150 to 1150 mm Distance from spindle center to pallet surface 100 to 1200 mm Pallet size 800 x 800 mm Workpiece weight (pallet load) evenly loaded 2200 kg Pallet changing time 13 seconds Table switching 1° x 360 positions Spindle speed range 35 to 7000 rpm Torque increased with 2 gear levels Tool holder BT/SK 50 Main motor 15 minute power 30 kW / continuous power 22 kW Max. torque 1177 Nm Inner diameter of spindle bearing 100 mm Rapid traverse speed 40000 mm/min. Cutting feed 40000 mm/min. Machine dimensions (standard specification) Height (measured from ground) 3527 mm Bwslraqjwgatqjbbsl Width 4353 mm Depth 6900 mm Weight (standard specification) 24 t Power supply 64.6 kVA

Condition: new, Year of construction: 2025, NEW Mobile loading and unloading ramp with a load capacity of 10T. Bwolrjrqfq Esaqbbjl Technical parameters: 1.) Load capacity 10T 2.) Internal width 2.0m - external width 2,1m 3.) Length 11.3m 4.) Total weight 2.9T 5.) Height adjustment 1.1-1.8 m 5.) Fork holder for the ramp transport truck 6.) Transport wheels 7.) Plumbing The ramp floor is made of BRIDGING GRILLE, which is GALVANIZED!!!. the grating is a great advantage of this ramp, unlike ramps that have a floor made of sheet metal and steel mesh or bars placed on it. the wheels of the forklift do not slip on the ramp, and they clean themselves during the drive, which means that the floor of the loaded container or truck is not contaminated with mud or snow. ​

Condition: used, turning diameter over cross slide: 230 mm, turning diameter over bed slide: 380 mm, center height: 190 mm, center width: 1,270 mm, Center Lathe Manufacturer: Strojimport, Type TK 380 x 1500 Technical Specifications Manufacturer: Strojimport Type: TK 380 x 1500 Year of Construction: Unknown Control: Conventional Center Distance: 1270 mm Turning Diameter over Bed: 380 mm Turning Diameter over slide 230 mm Center height 190 mm Spindle speed 45 – 2000 rpm Bed width / length / height 300 / 2120 / 305 mm Spindle bore 52 mm Dimensions: L 2.70 x W 1.00 x H 1.60 m Machine weight: 1200 kg Equipment - 3-axis digital readout - 3-jaw chuck with internal and external chucking - 2 live centers - 1 fixed center - 4 quick-change tool holders - 1 steady rest - 1 drill chuck - Machine feet All information is subject to change. Bwelraqewgch Debbjl A live demonstration is available at any time in our showroom.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Bwslraqbjwf Dzvobol Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, A vertical band saw is an asset to any workshop that processes steel. Sawing, notching and separating external and internal contours - the models in the VB A series are designed for all-round use and are characterized by their rigid construction, stable work table and variable belt guides Bolraqbjqhkktjbewl

Condition: used, Year of construction: 2016, Serial number: WKESD0000068xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 16407 Specifications: - 2016 model - Air suspension - Tires (see pictures) - Inside length: approx. 1,340 cm - Internal width: approx. 251 cm - Internal height: approx. 275 cm - Net weight: 9,500 kg - 2 temp Carrier unit - Ready for delivery Description: 2016 Krone cool liner cabinet semi with 2 temp unit. Ready for delivery. Technical approved: no Belrevgxvxsaqbbswl EU-approved until: 24.01.2024 Own weight: 9500 Total Weight: 43500 Payload: 34000 Width: 260 Length: 1404

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Travels X-axis 1040 mm Y-axis 600 mm Z-axis 500 mm Feed 40 m/min (X/Y/Z) Rapid traverse 40/70 m/min. (Y/Z-X) Table surface 1250 x 600 mm Table load 600 kg Spindle speed 1 - 8000 rpm Bwolraewgarmsqbbjl Power 13/19 kW at 100/40% ED Torque 140/200 Nm (S1/S6) Tool holder SK 40 Total power requirement 39 kVA Machine weight 8880 kg Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: used, mileage: 1,558,580 km, power: 385 kW (523.45 HP), first registration: 04/2000, fuel type: diesel, number of seats: 72, gearing type: automatic, emission class: euro2, color: red, brakes: retarder, Equipment: ABS, air conditioning, bathroom, onboard kitchen, parking heater, +++Engine and transmission v. 200,000-300,000km new+++ +++very clean condition+++ Engine: Mercedes-Benz Emission class: Euro 2 Gearbox: AutomaticSeats: 70+1+1 sleeping seats with lap belts _____ Safety * Retarder * Cruise control * ABS, ASR * Fog lights Passenger compartment Bolowg Np Israqbbewl * Auxiliary heating * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Sausage cooker * Central toilet * Leather head inserts * Driver microphone * Tour guide microphone Exterior * Trailer hitch prepared * Raising/lowering system * Power steering * Tachograph with window * Sun visor * Electric exterior mirrors * Driver door * Ski case eyelets * Central locking * Roof hatches Audio & communication * Radio / cassette * Video Other * Hubcaps * Twin tires * Tires: front: 50%, rear: 50%, rear: 40% * Vehicle dimensions: 2.55 m wide, 4.00 m high * Our internal vehicle number: 11383 Errors excepted. Images and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: new, Brand-New Machining Center HEIDENHAIN TNC 7 HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 450 mm Bweloh Ekqyeraqbbel Y-axis: 460 mm Z-axis: 500 mm Table diameter: 320 mm Maximum workpiece diameter: 400 mm Max. spindle speed: 12,000 rpm (oil-cooled) Spindle mount: SK 40-BIG PLUS (BVD 40) Max. spindle motor power: 17 kW Internal coolant supply - 20 bar Rapid traverse rates X, Y, and Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Dual gripper tool changer: 30-station (expandable up to 80 tools) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Bwolowf Dh Neraqbbsl Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, The machine frames of the RSM series are characterized by a heavy design and long, supporting guideways. The table can be swiveled and the finely adjustable hydraulic feed moves smoothly in the longitudinal direction. A large scale ring on the handwheel of the X-axis facilitates precise infeed and the zero stop guarantees compliance with the desired dimension. The standard position indicator with linear scales is used to check the actual values. The headstock is rotated 180 degrees for internal grinding. An extensive accessory package is standard. Bjlrjncdx Njaqbbjwl

Condition: ready for operation (used), total height: 2,865 mm, total length: 4,200 mm, throat depth: 400 mm, operating speed: 22 mm/s, table width: 120 mm, retraction speed: 200 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: Cadman Touch, power: 27 kW (36.71 HP), net weight: 11,000 kg, opening height: 400 mm, passage width: 2,600 mm, total depth: 2,725 mm, 2 buighulpmiddelen Turbo-versie Eenvoudig vorm lasermeetsysteem Lasersafe-beveiliging Capacity: 135 ton x 3100 mm Backgauge: CNC Locking speed: 180 mm/sec Bwolraqbov S Aniobol

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws Bwslraqowgan Uebbsl 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: used, mileage: 686,173 km, power: 266 kW (361.66 HP), first registration: 05/2011, fuel type: diesel, number of seats: 51, gearing type: mechanical, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, onboard kitchen, parking heater, General Engine: Paccar AdBlue Emissions Standard: EURO5 Total Seats: 51 Seats: 49 + 1 + 1 sleeping seats with lap belts Standing Room: 14 Transmission: Manual Original Mileage Safety * Retarder * Cruise Control * ABS, ASR, EBS * Fog Lights * Immobilizer Passenger Compartment * Auxiliary Heating * Air Conditioning Bwslrswg Npzoaqbbsl * Tables * Curtains * Luggage Racks * Luggage Nets * Jet Ventilation * Reading Lights * Double Glazing * Footrests * Kitchen * Refrigerator * Coffee Machine * Central Toilet * Leather Headrest Inserts * Tour Guide Microphone Audio, Communication, Electronics * Radio / CD * Video / DVD Exterior * Lifting/Lowering System * Power Steering * Tachograph Card * Sun Visor * Electric Exterior Mirrors * Central Locking * Roof Hatches * Roof Fans * Roof vent Other * German vehicle registration document * Dual tires * Vehicle length: 12.20 m * Vehicle width: 2.55 m * Vehicle height: 3.42 m * Hubcaps * Tires: Front approx. 50% * Tires: Rear approx. 50% Our internal vehicle number: 11524 Errors excepted. Images and text may differ from the actual vehicle. Over 300 vehicles are always available.

Condition: new, Brand New Machining Center HEIDENHAIN TNC 640 Digital Contouring Control HEIDENHAIN Package (Motors, Encoders, and Handwheel) X-Axis: 1,430 mm Y-Axis: 670 mm Z-Axis: 640 mm Table Size: 1,500 x 620 mm Table Load Capacity: 1,200 kg Spindle Speed: 10,000 rpm (Oil-Cooled) Spindle Mount: SK 40-BIG PLUS (BVD 40) Maximum Spindle Motor Power: 32 kW Internal Coolant Supply - 20 bar Rapid Traverse: 30,000 mm/min Positioning Accuracy: ± 0.005 mm Repeat Accuracy: ± 0.003 mm Tool Changer: 30-station Hinged belt chip conveyor 4th axis preparation (rotary table) Fully enclosed Bolrajhy Atfsqbbewl Only inquiries from Germany will be answered /// Only inquiries from Germany will be processed

Condition: used, mileage: 483,000 km, Year of construction: 2005, Serial number: WMAN13ZZX6Y15xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20114 Specifications: Model year: 2005 Mileage: approx. 483,000 km Transmission: Manual Tires: Good tires (see pictures) Internal length: approx. 447 cm Internal height: approx. 220 cm Curb weight: 5890 kg Max payload: 1525 kg Cargo lift Engine: 205 hp Tool cabinet Side opening 2x rotor lamps Bed Radio/CD Air conditioning (AC) Description: MAN TGL 8.210 box truck from 2005 with Cargolift and 205 hp engine. The truck has good tires , side opening , 2 rotor lamps and tool cabinet . It had EU approval , but this recently expired with comments on exhaust , brakes and chassis bolt . Bolrewdvlkeaqbbswl Sold as is, so some costs will be calculated. Ready for delivery . See video for more information. Km: 483000 HK: 205 Technical approved: no EU-approved until: 19.03.2025 Own weight: 5890 Total Weight: 7490 Payload: 1525 Width: 230 Length: 700 Euro: 4 Gearbox: Manual

Condition: new, The machine frames of the RSM series are characterized by a heavy design and long, supporting guideways. The table can be swiveled and the finely adjustable hydraulic feed moves smoothly in the longitudinal direction. A large scale ring on the handwheel of the X-axis facilitates precise infeed and the zero stop guarantees compliance with the desired dimension. The standard position indicator with linear scales is used to check the actual values. The headstock is rotated 180 degrees for internal grinding. An extensive accessory package is standard. Bwjlsncdx Eeraqbbjl

Condition: ready for operation (used), chuck outer diameter: 1,400 mm, total height: 4,100 mm, net weight: 20,000 kg, Type: Stanko 1516 Maximale werkstukhoogte: 1000 mm Verticale schuifmaat Maximale horizontale slak: 950 mm Maximale verticale slak: 700 mm Horizontale schuifmaat Maximale horizontale slak: 630 mm Maximale verticale slak: 1000 mm Dwarsbalk maximale slak: 660 mm Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Bolraqov Sftzebbjwl Long: 3170 mm Wide: 3030 mm

Condition: good (used), Year of construction: 1995, Functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter Bwolrswgai Seaqbbel and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 2910 mm Measurements depth 4888 mm Measurements height 2981 mm Machine weight 12000 kg Control Unit Model 310iS-A Brand FANUC Bolraqbswg Icyobewl Main Drive Number of spindles 1 Spindle speed range 14000 Spindle motor power 22 kW Tool taper HSK-A 63 Number of axis 4 Movement X-Axis Movement 730 mm Y-Axis Movement 730 mm Z-Axis Movement 800 mm Workpiece Workpiece weight 500 kg Tools Max weight 12 kg Max tool diameter 70 mm Max tool length 510 mm Media Chip conveyor Yes Internal cooling Yes Cooling pressure 30 bar Additional Equipment Direct path measuring systems in XYZ-axis Core cooling of the ball screw spindles and bearings with circulating oil // Jacket cooling on spindle nose and motor High-speed blanking function Linear guides in heavy-duty design: 55 mm Renishaw OMP60 touch probe // Renishaw Inspection Plus Automatic override of the corners: G62 Restart after programme interruption User macro with 600 variables Flow monitor for coolant through the spindle This 4-axis Makino A61nx horizontal machining center was manufactured in 2015. It features a robust spindle with speeds up to 14,000 min-¹, a torque of 240 Nm, and a power of 30 kW. The machine includes a high-capacity tool magazine with storage for 60 tools and rapid tool change times. Ideal for heavy-duty machining with a pallet size of 500 × 500 mm and maximum workpiece weight of 700 kg. For more information about this horizontal machining center, please reach out to us. Application Types Milling

Condition: new, BRAND NEW MACHINE HEIDENHAIN TNC 640 Digital Contouring Control HEIDENHAIN package (motors, encoders, and handwheel) X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm Rotary table: 1,600 x 1,200 mm Maximum workpiece weight: 6,000 kg Automatic universal swivel head 1° x 1° (optional with fixed spindle Ø 210 mm) Spindle mount: SK50 DIN 69871/A Bwjlraqjq I Ncqsbbsl Max. spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW Internal coolant supply - 36 bar Rapid traverse X, Y & Z: 30 m/min Positioning accuracy: 0.015 mm Repeatability: 0.010 mm 40-station tool changer 2 x longitudinal hinged chip conveyors Perimetric cover Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed

Condition: new, BRAND NEW MACHINE HEIDENHAIN TNC 640 Digital Contouring Control HEIDENHAIN package (motors, encoders, and handwheel) X-axis: 4,000 mm Z-axis: 2,000 mm Y-axis / Cross-arm: 1,500 mm V-axis / Cross-column: 1,000 mm Rotary table (C-axis): 2,195 x 2,195 mm Max. load capacity up to 20,000 kg Automatic universal swivel head 1° x 1° (optional with fixed spindle Ø 210 mm) Spindle mount: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW Internal coolant supply - 36 bar Rapid traverse speeds X, Y, V & Z: 30 m/min Bslraqbjq I Nlyjbswl Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-station Double-hinge chip conveyor (longitudinal) Perimetric enclosure Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed

Condition: new, Brand new bed-type milling machine with integrated rotary table HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, encoders, and handwheel) X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm Table size: 3,100 x 1,100 mm (including integrated rotary table Ø 1,100 mm) Automatic universal swivel head 1° x 1° Spindle mount: SK 50 DIN 69871/A Max. spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 38 kW Internal coolant supply - 36 bar Rapid traverse X, Y & Z: 30 m/min Positioning accuracy: 0.030 mm Bwslraqem Tv Iijbbol Repeatability: 0.010 mm Tool changer: 40-station (optional up to 150 tools) 2 x longitudinal hinged chip conveyors Perimetric enclosure Only inquiries from Germany will receive a response /// Only inquiries from Germany will be processed