Used International 833 for sale (9,543)

Condition: good (used), Year of construction: 2014, operating hours: 33,703 h, Serial no. 200167, control, make Siemens, type 840 Dsl (index C200-4D SL), bar capacity 40 mm, 6 work spindles, 10 slide units with X/Z NC axis, 2 synchronous spindles (swivel axis and Z axis NC controlled in positions 5.2 and 6.1), 2x three-jaw chucks Röhm KFD-HS 110, 1x boring device for three-jaw chuck, rear machining device on L 6.2, 1 set of driven tool carriers, bundle loader, make IEMCA, type SIR MS40F, model 33, year 2014, serial no. 02143 MB03, with tapping unit and minimum quantity lubrication, 6 material slides/rotary sleeves for D18 mm, 2 sets of internal clamping sleeves D18/D32 mm, drill breakage detection, coolant system, oil mist extraction, Büchel, CO2 extinguishing system, Kraft and Bauer, Colqjwg E Hpo I Hb Hsrb Operating hours: 33,703

Condition: used, Field of application: Internal logistics Please contact ATS Norway AS for more information Please provide reference number upon request: 19266 Specifications: - Weight: approx. 1390 kg - Model: P-12SS Coljvg Ah Sjq I Hb Herb - Max lift height: 450 cm - Lifting capacity: approx. 1200 kg - Ready for delivery. Description: Owner says it works. Some repair cost must be taken into account. It has a height of 4.5 meters. Can be delivered within a short time. Total Weight: 1390

Condition: used, Year of construction: 2012, Used 2011 YCM NDV102A Vertical Machining Centre. Supplied with 12,000 RPM Spindle, 30-station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: - X Axis: 1,020 mm - Y Axis: 600 mm - Z Axis: 600 mm - Spindle Nose to Table (~ max): 700 mm - Spindle Nose to Table (~ min): 100 mm​ TABLE: - Length: 1,120 mm - Width: 650 mm - T-Slot Width: 18 mm - Number of Std T-Slots: 6 - Max Weight on Table (evenly distributed): 1,000 kg​Machinery Resources International SPINDLE: - Max Rating: 15 kW (20 hp) - Max Speed: 12,000 rpm - Drive System: Direct Speed Belt Drive - Taper: Big Plus BBT40 - Bearing Lubrication: Oil Injection - Spindle Chiller FEEDRATES: - Rapid and Jog (Max.): 24 m/min AXIS MOTORS: - Axis Motor Rating X/Y/Z: 2.29/2.29/3.3 kW​ TOOL CHANGER: - Type: Side mount - Capacity: 30T - Max Tool Diameter: 76 mm - Tool Length Max.: 300 mm - Tool Weight Max.: 6 kg - Tool Change Time: 2.5 sec​ GENERAL: - Air Required: 78.2 psi/min - Power Supply: 400 V / 3 Phase - Coolant Capacity: 360 L Crjlqjwfdzcj I Hb Hsb - Machine weight 7,000kg Control: Heidenhain TNC i530 Spec: Travel X1020 Y600 Z600 mm | 12000RPM | BBT40 Accessories: Through spindle coolant, hi torque spindle motor, 30 tool side mount ATC

Condition: ready for operation (used), throat depth: 400 mm, operating speed: 21 mm/s, table width: 120 mm, retraction speed: 200 mm/s, controller manufacturer: Cadman-B Touch, power: 42 kW (57.10 HP), net weight: 15,000 kg, passage width: 2,600 mm, additional equipment features: yes, 9 assen: Y1 / Y2 / X / R / X#39; / Z1 / Z2 / T1 / V Easy Form lasermeetsysteem Vergrote opening en vergrote slag CNC gestuurde buighulp Wila boven- en onder hydraulische klemming Wila gereedschapsstation Lasersafe-beveiliging Capacity: 220 ton x 3100 mm Backgauge: CNC Max stroke: 400 mm - option Max distance between table -- ram: 600 mm - option Celq Iov Rwbzs Hb Hjrb Locking speed: 120 mm/sec

Condition: refurbished (used), Machine totaly reconditioned With DRO Center height 175 mm Distance between centers 1000 mm Grinding wheel 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speeds 1'500-2'200 rpm Crelq I Hswhk Uujb Hsb With internal grinding attachement Misc. accessories MARCELS MASCHINEN AG

Condition: like new (used), Year of construction: 2007, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4500 x 2000 mm Number of T slots: 11 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mm Y axis traverse: 3000 mm Z axis traverse: 1000 mm Crslqsugbn Ej I Hb Hob Vertical capacity (VC): -10 / 990 mm Distance between columns: 2435 mm Milling head Auto-indexing differential head (UAD - 0,1º) Tool clamping system: Hydraulic Taper nose: ISO50 Speed range: 6000 rpm Spindle power: 30 kW Feedrates Feedrate: 5000 mm/min Rapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 Kg Machine weight approximate: 45300 Kg Machine dimensions approximate: 10975 x 4768 x 5095 mm Accesories Guarding Automatic tool changer: ATC30 Coolant: External & internal high pressure through spindle Electronic handwheel: HR-410 Sales conditions Guarantee: 6 months mechanical spare parts Sale price (Ex Work): On request View all technical features

Condition: excellent (used), Year of construction: 2019, Machine type: CNC machining center vertical Model: NVX5100 2nd with Matris robot cell Manufacturer: DMGMORI Control: DMG MORI Celos Year of manufacture / Ib: 2019 / 2022 Location: Germany Technical data Travel range X-axis approx. 1050 mm Y-axis approx. 530 mm Z-axis approx. 510 mm Table size approx. 1,350x600 mm Workpiece weight max. approx. 1,200 kg Speed max. approx. 12,000 rpm Spindle motor approx. 37/22 KW Number of tool positions approx. 30 Rapid traverse approx. 30 m/min Holder taper approx. BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 45 kVA Floor space L x W x H approx. 3.1 x 2.85 x 2.6 m (without chip conveyor, without robot) Machine weight approx. 7,300 kg Main drive with higher torque - Tool holder cone for BT-40 tool holder - Tool magazine with 30 places (#40) - Door for tool magazine - Hinged belt conveyor including 2 internal screw conveyors and drum filter - I/F for high-pressure coolant system 70 bar, Knoll/Interlit - Mechanical I/F for oil mist separator (extraction opening, Ø 200 mm) - Oil separator - Spindle sensor measuring system with optical signal transmission, Renishaw OMP60 + workpiece adjuster - Table sensor measuring system tactile, Crelq I Hbewg Txye Hob Magnescale + tool adjuster (tool length only) - Signal light (red, yellow, green, blue) - Automatic door on the right side - I/F for hydraulic clamping device (two clamping circuits) - Workpiece positioning control (2 circuit) - EtherNet I/P interface - I/F for connecting a robot (EtherNet/IP), EtherNet/IP I/F is necessary - Column elevation 200 mm - Water-glycol cooler unit for the work spindle #40, built-in - 10 additional M commands - MPC (Machine Protection Control) - MVC (Machine Vibration Control) - Milling of pockets and islands - Fast fixed cycles - Coordinate system rotation - MATRIS handling package (workpiece storage 14 stations Ø150 mm) - Robot: FANUC M710iC/70, for workpieces up to max. 20 kg

Condition: used, mileage: 393,000 km, Year of construction: 2019, Serial number: YS2R6X2000216xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18911 Specifications truck: - 2019 model - Km: approx. 393,000 - Gear: Automatic - Tires (see pictures) - Retarder - Back tip - Hydraulic side and roof - Vang superconstruction - Euro 6 - Length: 904 cm - Width: 255 cm - Wheelbase: 435/135 cm - Net weight: 12,680 kg - Inside length: approx. 649 cm - Internal height: approx. 278 cm - Internal width: approx. 249 cm - 6x2 - 500 hp - Trailer hitch - Extra lights - Tool box - Radio/cd - Climate/ac Specifications trailer: - 2007 model - Tires (see pictures - Length: 1,121 cm - Width: 254 cm - Wheelbase: 131/419 cm - Net weight: 8500 kg - Tool box Description: 2019 Scania R500 chip truck for sale with Vang trailer from 2007. The Vang trailer needs some maintenance. Services are followed at Scania. Ready for delivery. Km: 393000 Celq I Hbsvg Aaue Hjrb HK: 500 Technical approved: Yes EU-approved until: 23.10.2025 Own weight: 12680 Total Weight: 28000 Payload: 15245 Width: 255 Length: 904 Euro: 6 Gearbox: Automatic

Condition: good (used), Universal machining center CNC DMU 70 VL Lid Maho Manufacturer [manufacturer]: Deckel Maho (DMG) Type [ type]: DMU 70 VL Steuerung [control unit]: Heidenhain TNC 430C Construction year: 09/2002 Travel path: X= 710mm Y=520mm Z=520mm spindle rotation speed: 20-18,000 rpm Main spindle power: 36 kW Colqevcm I Ie I Hb Hjrb IKZ Internal coolant supply: 30 bar Tool changer: 2 x 32 places Tool holder: SK 40 according to DIN2080 Coolant system: Knoll Chip conveyor: 2 units Weight: 12.800kg Space required [needed space ]approx. (L x W x H): 5.3m x 2.75m x 2.75m Further information: - CNC 5-axis machining center universal - 2 pcs. NC rotary tables with swivel axis - Clamping surface rotary axis (rotary axis): Ø 700 mm x 500 mm - Max. load (centered): 350 kg Complete documentation is available. Inspection under power can take place at short notice. If you have any further questions, please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: ready for operation (used), Panelen voor thermische isolatie van industriële gebouwen Panelen voor sectionaaldeuren (huidige configuratie) Panelen voor residentiële dakisolatie Manni trolleypers 2+2 De hydraulische gesloten matrijzenpers (2+2) is de optimale oplossing qua productiviteit en fabrieksindeling. Onafhankelijk gemotoriseerde tafels maken het mogelijk om één sandwichpaneel te prepareren terwijl een ander paneel in de pers uithardt, waardoor de productiestoptijden aanzienlijk worden verkort. - 4 tafels - tafelafmetingen: 9500 x 1600 mm - maximale opening: 150 mm - elke cyclus produceert 4 sandwichpanelen Manni-manipulator voor automatisch laden en lossen + stapelen van afgewerkte panelen Maximaal werkstukgewicht: 700 kg Celq Iev Sfmnj Hb Herb Polyurethaan doseerunit Cannon A-Compact HF De injectie wordt aan beide zijden van de Manni-pers gedaan Ontworpen voor de verwerking van polyolmengsels met vaste vulstoffen (RRIM) Ommantelde en geïsoleerde tanks met niveauregeling en automatisch bijvullen met speciale roerder voor vaste vulstoffen Recycle stroomverdelers Digitale lage/hoge drukmeters Hybride doseersysteem: zuigerpomp voor isocyanaat, hydraulische cilinder speciaal ontworpen door Cannon voor gevulde polyol Automatische output- en ratio-aanpassing en -regeling in gesloten lus Touchscreen bedieningspaneel Kalibratie van elk onderdeel direct via de mengkop 400V – 50Hz – 118 ampère – 66 kW Benodigde ruimte : 25 meter x 16 meter x 4,16 meter CBM-rolvormlijn voor het maken van sandwichpanelen voor sectionaaldeuren klik hier Manni / Cannon PU pers klik hier Rolvormlijn voor het maken van verschillende profielen voor de installatie van sectionaaldeuren klik hier Bonnamy tubebender klik hier

Condition: excellent (used), with internal grinding attachment Center height 125 mm Distance between centers 600 mm Grinding wheel 400 x 40 x 127 mm Crslq I Hbeiu E Tre Heb Misc.accessories MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 2014, operating hours: 54,816 h, Functionality: fully functional, Year of manufacture 2014 3D control Heidenhain TNC 530 Tool holder HSK-A-63 Chain magazine with 60 tool positions NC swivel rotary table / C-axis table top d 650 Travel paths 750 mm x 650 mm x 560 mm Production package / 600 liters / internal cooling 40 bar / 23 l/min Rotating viewing window Flushing gun with pump Oil and emulsion separation system Infrared measuring probe / Heidenhain TS 649 Tool measurement in the work area (Blum Laser) Oil and emulsion separation system Infrared measuring probe / Heidenhain TS 649 3D quickSET expansion package Four-color signal light Operating mode 4 Motor spindle speedMASTER 18,000 rpm Spindle hours 24,449 Tool measurement in the Work area (Blum Laser) Crelq I Hbewhltxo Hob

Condition: excellent (used), Year of construction: 2020, Machine type: CNC machining center horizontal Manufacturer: DMGMORI Type: NHC4000 Commissioning: 2021 Control type: Mitsubishi M730BM Origin: Japan Storage location: Germany Delivery time: from stock Equipment Spindle speed 15,000 rpm, 30/18.5 kW - BT40 with face contact, pull stud: BT-90° - Internal coolant preparation - Chip conveyor - Automatic turning APC with 2 stations - Measuring probe (spindle) - Tool length measuring system - Mobile operator panel - B-axis 0.001° - Tool magazine for 60 tools - Coolant flushing gun with holder - Signal lamp 4 colors - Oil mist extraction interface - INTERLIT-TMF300/600 compact filter system 70 bar - Milling functions for pockets and islands - Fast canned cycles - 10 external M-codes - Increased 48 working coordinate pairs - Expansion of the part program memory to 1 MB with a maximum of 1,000 storable part programs Travel range X-axis approx. 560 mm Y-axis approx. 560 mm Z-axis approx. 660 mm Table 360° 0.001° Workpiece diameter approx. 630 mm Max. workpiece weight approx. 400 kg Colq Iowg Tw As Hb Hsrb Max. speed approx. 15,000 rpm Spindle motor approx. 30/18.5 kW Number of tool positions approx. 60 Rapid traverse approx. 60 m/min Adapter taper BT40 Compressed air pressure bar, L/min approx. 5, 300 bar, L/min Power consumption approx. 37.3 kVA Footprint L x W x H approx. 2.70 x 4.20 x 2.54 m Machine weight approx. 7,600 kg This offer is subject to change and non-binding. (Subject to changes, errors, and prior sale)

Condition: used, Year of construction: 2017, Serial number: W09STTM3NHEN1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18975 Specifications: - 2017 model - 3 axle - Turn on 3 axles - Hydraulic kj rebruer - Extraction at 5.5 metres - Internal length on 1 stage: 4,413 m - Internal length p 2 stage: 8,887 m - Total internal length: 13,281 m - Internal width: 2,511 m - Tires (see pictures) - Light - Cupboard space - Ready for delivery Description: 2017 HRD 3 axle machine trailer for sale. Everything works as it should according to the previous owner. There is a turn on 3 axles and an extension of 5.5 metres. Ready for delivery Technical approved: Yes EU-approved until: 08.01.2026 Own weight: 11940 Total Weight: 52900 Cslq I Hbsvgyfze Hjrb Payload: 40960 Width: 255 Length: 1375

Condition: used, mileage: 543,934 km, power: 266 kW (361.66 HP), first registration: 02/2010, fuel type: diesel, number of seats: 57, gearing type: mechanical, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, navigation system, parking heater, +++Original Mileage+++ Engine: Pacaar Cjlqjv T E D Ns I Hb Horb Emission Class: Euro 5 Transmission: Manual Seats: 55+1+1 sleeper seats with lap belts _____ Safety* Retarder * Cruise control * ABS, ASR * Fog lights * Rear view camera Passenger compartment* Auxiliary heating * Air conditioning * Luggage racks * Vented air vents * Reading lights * Double glazing * Footrests * Refrigerator * Leather headrest inserts * Tour guide microphone * Driver microphone Exterior* Trailer hitch ready * Lift/lower system * Power steering * Tachograph with card * Sun visor * Sleeper cabin ready * Electric exterior mirrors * Roof hatches, fans, roof vents Audio and Communication* Navigation system * Radio/CD * Video/DVD Other* Vehicle dimensions: Length 12.20 m, width 2.55 m, height 3.42 m m * Hubcaps * Dual tires * Tires: Front: 60%, Rear: 60% Our internal vehicle number: 11447 Errors excepted. Images and text may differ from the vehicle. Over 300 vehicles constantly available.

Condition: ready for operation (used), laser power: 4,000 W, controller manufacturer: Siemens, FL 600 3D tube laser cutting machine 4000 Watt Trumpf CO2 4 self-centring mobile mandrels tube length control 5 axis 3D laser cutting system Crolqewgfyvo I Hb Hjb Siemens 840D tube diameter: from 100 to 610 mm tube length: from 4000 to 14 000 mm square section: from 100 x 100 to 400 x 400 mm max rectangular section: 500 x 300 mm max oval section: 500 x 300 mm max C-profile: 500 x 300 mm max L-profile: 400 x 400 mm max IPE profile: 550 mm max HEA profile: 400 mm With loading unloading stations X: 3500 mm Y: 1500 mm Z: 1000 mm Type of Laser: Trumpf TLF 4000

Condition: reconditioned (used), machine/vehicle number: 27918, Year of construction: 2018, operating hours: 11,633 h, – REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Colewg S U Hoq I Hb Hjrb Serviced and tested (C5 test) battery for electric devices (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lift mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Forklift truck specifications Manufacturer: Jungheinrich Type: Jungheinrich TFG 435s – Gas-powered front loader Drive type: Gas LPG Load capacity: 3,500 kg Lift height: 4,300 mm Load center: 500 mm Year of manufacture: 2018 Operating hours: 11,633 Mast type: Duplex Fork length: 1,200 mm Overall height: 2,871 mm Weight: 4,995 kg Attachments: Sideshift Front tires: Solid rubber Rear tires: Solid rubber

Condition: good (used), Year of construction: 1972, Functionality: fully functional, travel distance X-axis: 290 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table width: 195 mm, table length: 640 mm, overall weight: 1,200 kg, Dimensions: 1066 x 1048 x 1330 mm Croljwg Dufeq I Hb Hob Milling spindle adjustable in 16 steps Internal taper of the spindle: ISO 40 travel distance (x/y/z) 290/170/310 mm

Condition: used, Year of construction: 2017, Used Mori Seiki NHX4000 2nd 1 Model: NHX4000 2nd Manufacturer: DMGMORI Control: CELOS Mitsubishi Year of manufacture / Commissioning: 2017 / 2018 Technical specifications Travel range X-axis approx. 560 mm Y-axis approx. 560 mm Z-axis approx. 660 mm Table 360° 0.001° Workpiece diameter approx. 630 mm Max. workpiece weight approx. 400 kg Max. speed approx. 15,000 rpm Spindle motor approx. 30.7/26/18.5 kW Number of tool positions approx. 60 Rapid traverse approx. 60 m/min Adapter taper BT40 Compressed air pressure bar, L/min approx. 5, 300 bar, L/min Power consumption approx. 37.3 kVA Footprint L x W x H approx. 2.70 x 4.20 x 2.54 m Machine weight approx. 8,500 kg Spindle speed 15,000 rpm, 30.7/18.5 kW - BT40 with face contact, pull stud: BT-90° - Internal coolant supply Preparation - Chip conveyor - Automatic turning APC with 2 stations - Measuring probe (spindle) - Tool breakage detection system - Mobile operator panel - B-axis 0.001° - Tool magazine for 60 tools - Coolant flushing gun with holder - Signal lamp 4 colors - Knoll Crolq I Howg Twcjb Heb Compact filter system 70 bar - Milling functions for pockets and islands - Fast canned cycles - Increase in the number of working coordinate pairs by 48 This offer is subject to change and non-binding. (Subject to changes, errors, and prior sale expressly reserved)

Condition: used, mileage: 65,200 km, Year of construction: 2022, Field of application: Freight transport Serial number: ZCFC735B405447737 Please contact ATS Norway AS for more information Please provide reference number upon request: 20228 Specifications: 2022 model Km: approx. 65,200 Driving license class B 8 pallets Wheelbase: 375 cm 4x2 156 hp Tires (see pictures) Winter tires Summer tires on alloy wheels Internal length: approx. 4.146 m Internal height: approx. 2.214 m Internal width: approx. 2.139 m Total height: 3.2 m Zepro lift Remote control Automatic 3 seats Radio/DAB AC/climate Ready for delivery Celq I Hewdvd Hjb Hsrb Description:2022 IVECO 35S16 4x2 truck with lift and 2 sets of tires.The truck can be driven with a class B driver's license.EU approved until February 2026.Ready for delivery. Km: 65200 HK: 156 Technical approved: Yes EU-approved until: 10.02.2026 Own weight: 2520 Total Weight: 3500 Payload: 905 Width: 220 Length: 658,2 Euro: 6 Gearbox: Automatic Number of seats: 3

Condition: used, mileage: 782,294 km, power: 350 kW (475.87 HP), first registration: 07/2014, fuel type: diesel, number of seats: 56, gearing type: automatic, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, sleeping cabin, +++Voltage transformer+++ +++Panoramic roof+++ Original-KM Engine: Mercedes-Benz AD Blue Emission class: Euro 6 Transmission: 8-speed automatic Seats: 54+1+1 sleeping seats with lap belts _____ Safety and security * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Front fog lights * Immobilizer * LED lights * Brake assist * Lane departure warning system * Reversing camera * Multifunction steering wheel Passenger compartment * Auxiliary heating * Automatic air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lamps * Double glazing * Footrests * Kitchen * Refrigerator + extra * Coffee machine * Center WC * Head leather inserts * Driver's microphone * Tour guide microphone Exterior * Trailer coupling prepared * Lifting/lowering system * Power steering * Tachograph with card * Sun visor * Sleeping cabin Cslowhhnxjq I Hb Horb * Electric exterior mirrors * Ski boot eyelets * Central locking * Roof hatches, fans, roof ventilators Audio [&] Communication * Navigation system * Radio, CD * USB connection * Video, DVD Miscellaneous * Vehicle dimensions: length: 14.16 m, width: 2.55 m, height: 3.88 m * Hubcaps * Twin tires * Tires: VA.: 70 %, MA.: 70 %, HA.: 70 % * Our internal vehicle number: 10643 Errors excepted. Pictures and text may differ from the vehicle. Over 300 other vehicles constantly on offer.

Condition: ready for operation (used), total height: 3,900 mm, total length: 8,000 mm, controller manufacturer: Heidenhain, net weight: 13,000 kg, total depth: 2,900 mm, Type: TMML6-centrum Maximale afstand van kolom tot midden van spindel: 1210 mm (diepte van de kiel) Gereedschapswisselaar met 30 posities Spaantransportband Kan achteraf worden uitgerust met nieuwe Heidenhain-besturing Originele tafel kan opnieuw worden gebruikt of een T-gleuf vloerplaat om hogere werkstukken te kunnen bewerken Crolq I Hev St Efsb Hob Longitudinal travel X-axe: 3023 mm Crosstravel Y -axe: 800 mm Travel Z-axe (Height): 1528 mm Dimensions clamping space - table: 4200 x 1000 mm Max Height of workpiece: 2000 mm Power on spindle: 20 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 50 > 1980 rpm

Condition: reconditioned (used), machine/vehicle number: 26692, Year of construction: 2019, operating hours: 6,832 h, – REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Serviced and tested (C5 test) battery for electric devices (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Crslq Iewg S Uts Hb Hob Forklift Truck Data Manufacturer: Jungheinrich Type: Jungheinrich DFG 435s - Diesel Front Loader Drive type: Diesel Capacity: 3,500 kg Lift height: 4,700 mm Load center: 500 mm Year of manufacture: 2019 Operating hours: 6,832 Mast type: Duplex Fork length: 1,200 mm Height: 3,075 mm Terrain weight: 5,200 kg Attachments: Sideshift Front tires: Solid rubber Rear tires: Solid rubber

Condition: used, mileage: 755,416 km, power: 324 kW (440.52 HP), first registration: 04/2016, fuel type: diesel, number of seats: 59, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, +++New EGR valve+++ +++New clutch 15,000 km ago+++ +++New trailing axle+++ +++Voltage converter+++ General Engine: MAN AdBlue Emission standard: EURO6 Total seats: 59 Seats: 57+1+1 Sleeper seats with lap belts Transmission: Automatic Original mileage Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobilizer * Xenon headlights * Brake assist * Lane departure warning * Rear view camera * Multifunction steering wheel Passenger compartment * Auxiliary heating * Wood-look flooring * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Coffee machine * Central toilet * Headrests * Hoods * Tour guide microphone * Driver microphone Audio, communication, electronics * Navigation system * Radio/CD * Video/DVD * Voltage converter Exterior * Trailer hitch * Lifting/lowering system Cjljwhhnroq I Hb Horb * Power steering * Tachograph map * Sun visor * Sleeping cabin ready * Electric exterior mirrors * Ski case eyelets * Central locking * Roof hatches Other * German vehicle registration document * Twin tires * Vehicle length: 13.80 m * Vehicle width: 2.55 m * Vehicle height: 3.90 m * Hubcaps * Tires: front approx. 50% * Tires: rear approx. 50% Our internal vehicle number: 11535 Errors excepted. Images and text may differ from the vehicle. Over 300 vehicles always on offer.

Condition: reconditioned (used), machine/vehicle number: 26486, Year of construction: 2012, operating hours: 13,828 h, – REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Crelq I Hewg S Ugsb Hsb Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Serviced and tested (C5 test) battery for electric devices (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lift mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Forklift truck specifications Manufacturer: Jungheinrich Type: Jungheinrich TFG 320s – Gas-powered front loader Drive type: Gas LPG Load capacity: 2,000 kg Lift height: 4,500 mm Load center: 500 mm Year of manufacture: 2012 Operating hours: 13,828 Mast type: Duplex Fork length: 1,200 mm Overall height: 2,805 mm Terrain weight: 3,210 kg Attachments: Sideshift Front tires: Solid rubber Rear tires: Solid rubber