Used Becx Obks90-45 for sale (25,067)

Condition: new, overall weight: 38 kg, empty load weight: 4 kg, maximum load weight: 33 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, machine/vehicle number: 3703d600260244d5f159f51e4, Further information Chassis Saddle Container Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mounts: Incl. Rear extension retracted: 1 x 20 feet flush with the rear, attention low fifth wheel load Rear extension extended 1st stage: 1 x 30 feet, 2 x 20 feet, 1 x 40 feet with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 feet with gooseneck tunnel and overloaded to the rear without rear height adjustment and without folding center supports, no transport of containers without tunnel possible. Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards Incl. with anti-spray flaps according to EG Impact protection at the rear Axles + suspension Dkelimwqoi Ri Eqe Nol SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored line routing for easy service. 200 spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (Note! with certain towing vehicles, misdiagnoses can occur even though the function is is given) 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions Attention: Transport of filled tank containers is excluded! When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder 390 Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Support legs coated black Attention: Archive pictures!

Condition: good (used), Year of construction: 1990, cutting width (max.): 1,000 mm, cutting height (max.): 140 mm, table length: 1,400 mm, power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Dkslijtxh Niomwq Njl

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: S0063866, New variable screwcompressor ALMIG Variable XP 45 Controller: Aircontrol Premium Year 2022 Hours: 1 h good condition, available short. Technical specifications: type: Variable XP 45 Possible operating pressures of the system: 5 to 13 bar Quantity delivered at 5 bar : 3.02 to 8.42 m³/min at 6 bar : 3.00 to 8.40 m³/min at 7 bar : 2.98 to 8.38 m³/min at 8 bar : 2.96 to 7.86 m³/min at 9 bar : 2.95 to 7.08 m³/min at 10 bar : 2.93 to 7.02 m³/min at 11 bar : 2.90 to 6.26 m³/min at 12 bar : 2.85 to 6.23 m³/min at 13 bar : 2.82 to 5.92 m³/min Installed power: 45 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Dolimjtpxctowq Nokl Sound pressure level (DIN 45635 T13) : 72 dB (A) Compressed air connection: G 2" Dimensions and weight Length : 2000 mm Width : 1250 mm Height : 1750 mm Weight : 1555 kg Visit our store. We´ve got a lot of compressors and dryers on stock.

Condition: used, Rohde ME 45/13 Kiln Kiln Chamber kiln Dimensions: Inside - 350mm x 500mm x 250mm ( W x D x H ) Outside - 1000mm x 1300mm x 1400mm ( W x D x H ) Weight: approx. 270 kg Tmax: 1300 °C Year of construction: 2012 Power: 13 kW You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. Delst Uauueimwq Nskl A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 2016, Functionality: fully functional, machine/vehicle number: BF15103648, TECHNICAL DETAILS WORKING RANGE Dkslott D Adsimwq Nsl Travel in X/Y/Z: 160 /+40/-30 / 510 mm Bar passage: max. 45 (51) mm Turning diameter: max. 300 mm Rotation diameter over bed 430 mm Rapid traverse speed X/Y/Z 30 / 15 / 45 m/min MAIN SPINDLE Speed: max. 7000 rpm Drive power: max. 15 kW Torque: max. 100 Nm COUNTERSPINDLE Speed: max. 7000 rpm Drive power: max. 15 kW Torque: max. 100 Nm TOOL TURRET 1 VDI size: VDI 25 Number of tool positions: 12 Driven tools: 12 Speed: max. 6000 rpm Drive power: max. 4 kW Torque: max. 16 Nm TOOL TURRET 2 VDI size: VDI 25 Number of tools: 12 Of which driven: 12 Speed: max. 6000 rpm Drive power: max. 4 kW Torque: max. 16 Nm EQUIPMENT - Chip conveyor - Parts catcher - Accessories shown

Condition: new, Year of construction: 2022, Functionality: fully functional, Year of manufacture of the machine was December 2022 - the manufacturer confirms that the warranty (on parts) is valid until December 2024 Machine still in OVP / original packaging! TECHNICAL DETAILS Control system: Sinumerik 840-sl/ OPERATE Swivel range over bed: Ø 430 mm Swivel range cross slide: Ø 300 mm Distance from main spindle to counter spindle: 720 mm Turning diameter: max. Ø 300 mm Workpiece length: max. 480 mm Bar passage: Ø 45 mm Travel paths Travel X / X2: 160 / 150 mm Travel Z / Z2 / Z3: 510 / 510 / 510 mm Travel Y: +40 / -30 mm Main spindle Speed range: 0 - 7000 rpm Dkolietwbx Iomwq Nol Torque at the spindle: max. 100 Nm Spindle connection: DIN 55026 A2-5 Spindle bearing (front inside diameter): Ø 85 mm Spindle bore: Ø 53 mm Counter spindle Speed range: 0 - 7000 rpm Torque at the spindle: max. 100 Nm Spindle connection: DIN 55026 A2-5 Spindle bearing (front inside diameter): Ø 85 mm Spindle bore: Ø 53 mm C-axis Resolution: 0.001° Rapid traverse speed: 1000 rpm Spindle indexing (disk brake): 0.01° Drive power Main spindle: 15 kW Counter spindle: 15 kW Tool turret 1+2 Number of tool positions: 2 x 12 Tool holder according to VDI (DIN 69880): VDI 25 Shank diameter for boring bars: Ø 25 mm Turret indexing time: 0.2 sec Driven tools 1+2 Speed range: 0 - 6000 rpm Torque: 16 Nm Drive power: 4 kW Number of driven tools: 2 x 12 Feed drives Rapid traverse speed X / Y / Z: 30 / 15 / 45 m/min Feed force in the X-axis / Y-axis: 4000 N Feed force in the Z-axis: 5000 N Feed force in the counter spindle of the Z-axis: 6000 N MACHINE DETAILS Connected load: 30 kVA Supply pressure: 6 bar Height of the machine: 1985 mm Space required WxD without chip conveyor and coolant: 2680 × 1950 mm Occupied area WxD with chip conveyor and coolant: 3990 × 1950 mm Total weight of the machine: 4200 kg Transport dimensions: 2820 x 2150 x 2295 mm Transport weight with/without pallet: 4000 / 3700 kg EQUIPMENT chip conveyor Integrated coolant device Tank volume 300 l Coolant pumps for the tool turret 2 x 14 bar Flushing pumps for the work area 2 x 3.7 bar Hollow clamping cylinder on the main spindle Draw tube for the main and counter spindles Mechanical spindle brake Part ejector and flushing through the counter spindle

Condition: new, overall weight: 38 kg, empty load weight: 3 kg, maximum load weight: 34 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, machine/vehicle number: db8c7ca763dc8d3b3d034dfa4, Further information Chassis semi-trailer container Welded fine-grained steel construction, saddle plate with replaceable 2 kingpins Container mounts:1 x 40 feet with gooseneck tunnelFront extension extended: 1 x 45 feet with long gooseneck tunnel and overloaded to the rear The transportation of filled tank containers is excluded. Without rear height adjustment and without folding center supports, no transport of containers without tunnel possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 containers with long tunnel) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Dkslsi Riwmeimwq Nsl Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Test connection for brake cylinder pressure on the EBS module laid to the outside. Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle - driving stability system Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (note! with certain towing vehicles, misdiagnosis can occur although the function is given) 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions Attention: Transport of filled tank containers is excluded! When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Country of registration / plates Germany Test approval according to EG 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Support legs coated black Without pallet box Paint Attention: Archive pictures!

Condition: new, Year of construction: 2025, SAF brand 3-axle container semi-trailer, 1st and 3rd liftable, 130mm neck, steel rims, triple extension for 20', 40' and 45' crates, steel light unit support, full led lighting, twist and lock, 6kg fire extinguisher, spare wheel carrier, document holder, EBS telematics, ADR certificate. Ready for delivery. Dsljrzr D Ioimwq Njkl

Condition: new, Year of construction: 2024, EvoDrive control Swivels +/- 46° on both sides - Electromotive height and tilt adjustment -46 to +46° for the main saw blade with main saw blade with automatic correction of the cutting height when Swivel of the saw unit - Control at eye level, swiveling - Double roller carriage, carriage length 3,200 mm Dkjlimshuph Dswq Nel On/off switch at the end of the sliding carriage - CNC parallel fence 1300 mm cutting width - DIGIT L digital angle mitre fence with length compensation, manually adjustable with 2 stop flaps - Saw blade projection 204 mm, max. saw blade diameter 550 mm - Drive power 6.5 kW (VARIO, infinitely variable speed) - AKE tool clamping system for the main saw blade Preparation for retrofitting a scoring unit - Machine height 91 cm Table top extension 840 mm Front support roller Template holder DUPLEX mitre fence

Condition: excellent (used), Year of construction: 1991, Baler BOA 45 K Baler BOA 45 K 1 Description, Technical data baler: Manufacturer BOA Type 45 K Year of construction 1991/ 2013 completely overhauled and renewed the PLC Press power main press 70 tons Feed channel 1,500 x 1,000 mm Volume press space 1,7 m³ Theoretic cycle time 18 seconds Bale size 700 x 1,150 mm, length variable Driving motor 2 x 18,5 kW Connected load 60 kW Tying system 4-fold vertical, 2-fold horizontal, fully automatic Throughput rate 6 up to 10 tons/hour, depends on material Bale weight 500 up to 600 kg, depends on material PLC Unitronics EX-D16A3-T016 Volume hydraulic oil tank 800 l Transport dimensions only baler 9,800 x 2,250 x 3,200 mm (l x w x h) Machine weight baler approx. 18 tons Condition: The press was completely overhauled in 2013, provided with a new PLC and is in a good condition. Dolimwqeqhnw Aj Nokl Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Functionality: fully functional, Year of construction: 2016, load capacity: 4,000 kg, fork length: 1,300 mm, Fork positioner Condition: Ready for use and fully functional Technical condition: good Djlimwqeudf N Io Nekl Description: Year 2016 ISO 3A (51 cm) Capacity 4000 kg Sideshift Opening range 390-1240 mm Width 1280 mm Forks 1300-2200 mm ID OS1329SLO

Condition: new, Year of construction: 2024, Functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, power: 5 kW (6.80 HP), sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder Dkolouh R R Esimwq Nsl - On/Off switch on the double roller carriage - Front support roller

Condition: new, overall weight: 38 kg, empty load weight: 5 kg, maximum load weight: 32 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, machine/vehicle number: e4d182b7a074e7b83e540ed58, Further information Chassis Saddle Container Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mountings: Rear extension retracted: 1 x 20 feet flush with the rear, low fifth wheel load Rear extension extended 1st stage: 1 x 30 feet, 2 x 20 feet, 1 x 40 feet with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 feet with short gooseneck tunnel and overloaded to the rear Rear extension extended 2nd stage + front extension 1st stage: 1 x 45 feet with long gooseneck tunnel and chamfered corners With rear height adjustment and folding center supports for containers without tunnel Container guide at the front Plug-in and removable (electrical, air and brake connections at the front of the front cross member) Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use Front extension mounted on rollers, can be pulled out manually (for 45 containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift & lower valve + auto-reset function Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Special approval required if the total train length exceeds 16,500 mm. Dksliji Rizuemwq Nel When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Approval / plates Germany Test approval according to EG 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Possibility to carry out work tests during inspections; Good technical condition; CE marked machine. Folding machine manufactured by the renowned German company GUK equipped with a high pile feeder (sheet picking with a suction roller from above) FL2-45, 2 folding aggregates, pocket with maximum working widths of 46 and 36 cm respectively and lining. Folding machine GUK model FA 45/6-4 FL2-45 – infeed width 450 mm (6+4 folding pockets). Maximum input format: 460 x 650 mm Minimum input format: 105 x 145 mm Maximum paper weight: approx. 180 g/m² Minimum paper weight: approx. 45 g/m². (the given range of weights does not include all folding schemes) Minimum folding length: first fold 26 mm, each subsequent fold 22 mm Feed rate of sheets from feeder: 30 - 150 m/min. (the production speed depends on the folding scheme, the quality and type of paper and external conditions such as air temperature and humidity) Power supply: 400 V/50 Hz Dkslimwevf D Nuoq Nsl Machine equipment: 1. High pile feeder FL2-45; Side blowers for easy sheet picking; Separation head for backloading of sheets with the help of suction cups and additional blowers; Automatic electronic height adjustment of the separation head relative to the top edge of the pile; Maximum pile height approx. 600 mm. 2. Double sheet detector, electromechanical. 3. Batch counter. Multifunction counter programming the operation of the machine. It has a dual digital display. Ability to fold sheets in groups (lots) of the given number in each lot, with stepless adjustment of the spacing between parties. The display shows the total number of falsified sheets, the number of batches of folded sheets and the speed of the machine at any given time. 4. I. folding unit FA 45/6, 6 folding pockets All folding pockets with integrated deflectors; Automatic setting of rollers using paper strips; Perforation, creasing and cutting equipment, 1 tool; Hinged chute delivery 5. Sound reduction hoods, top and bottom. 6. Intermediate transport ZWT 45/2 with indepedend drive. 7. II. folding unit FA 36/4, 4 folding pockets All folding pockets with integrated deflectors; Automatic setting of rollers using paper strips; Perforation, creasing and cutting equipment, 1 tool; Hinged chute delivery 8. Sound reduction hoods, top and bottom. 9. Vertical stacker KS 310 – passaging width 305 mm; For suspension after I. or II. folding unit; Pile height (product) 20 – 115 mm. 10. Ejector magnet for marking falsified batches sheets in the KS 310 without stopping the machine.

Year of construction: 2024, Condition: new, Flagship Model of Spica Series CMM Spica 3000 - Simultaneous Three Color Printing: two color printing on the front & 1 Color on the back of the label. Deliegqggnjmwq Njkl Double sided printing and ribbon saving function reduce cost and realize more effective printing. Easy design and operation with printing application NiceLabel. Rotary Cutter and Stacker included. NiceLabel Designer Pro - option. Print speed: up to 150 mm per second. Resolution: 300 dpi. print on roll media. CMM ULTRASONIC CUTTER CUC-45 CUC-45 is an optional equipment for Spica Series. Vega series have ultrasonic cutter CUC-45 as an option. It needs to connect both ultrasonic generator and cutter assembly with the care label printer to use Ultrasonic Cutter CUC-45. We recommend CUC-45 to cut double sided label. Generation of fray at the cut edge can be eliminated as the edge is cut precisely by the ultra-sonic cutter.

Condition: used, Buderus Logamax PLUS GB45 Condensing gas boiler - There are three of them! - The three can even be connected to cascade mode, so 10-135 kw of power is provided! Dkjlimwqshlvfde Nel - The price is a piece of price! - With starting fittings with 3 m flue!

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 6,373 h, load capacity: 4,500 kg, lifting height: 2,980 mm, fuel type: electric, mast type: standard, construction height: 2,300 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Delouimb Aeimwq Nekl Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery Volt: 80V Battery year of construction: 2016 Sideshift, 3rd valve, 4th valve, Heating, Full cab,

Condition: used, Year of construction: 2017, load capacity: 4,500 kg, Telescopic forks ISO class: ISO class 3 = 2,500 - 4,999 kg Dkjlijt Tappemwq Nsl Condition: Ready for use and fully functional Technical condition: Good Description: Capacity 4500 kg ISO 3A (51 cm) Opening range 1550-2350 mm ID OS1269

Condition: used, Year of construction: 2020, load capacity: 4,500 kg, Telescopic forks Dolst Tapioimwq Njkl ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Good Description: Capacity 4500 kg ISO 3A (51 cm) Opening range 1550-2350 mm ID OS1268

Condition: used, Year of construction: 2018, load capacity: 4,500 kg, Telescopic forks ISO class: ISO class 3 = 2,500 - 4,999 kg Delimwqjt Tapce Nokl Condition: Ready for use and fully functional Technical condition: Good Description: Capacity 4500 kg ISO 3A (51 cm) Opening range 1550-2350 mm ID OS1267

Condition: used, Year of construction: 2017, load capacity: 4,500 kg, Telescopic forks ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Good Dkjlst Tan Ssimwq Njl Description: Capacity 4500 kg ISO 3A (51 cm) Opening range 1550-2350 mm ID OS1266

Condition: used, Year of construction: 2019, load capacity: 4,500 kg, Telescopic forks ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Dkjlimwqjt Tan Ee Nel Technical condition: Good Description: Capacity 4500 kg ISO 3A (51 cm) Opening range 1550-2350 mm ID OS1265

Condition: used, Year of construction: 2020, load capacity: 4,500 kg, Telescopic forks ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Dolijt Tanxemwq Nekl Technical condition: Good Description: Capacity 4500 kg ISO 3A (51 cm) Opening range 1550-2350 mm ID OS1264

Condition: used, Year of construction: 2018, load capacity: 4,500 kg, Telescopic forks ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Good Dkjljt Tanrjimwq Nol Description: Capacity 4500 kg ISO 3A (51 cm) Opening range 1550-2350 mm ID OS1263

Condition: used, Year of construction: 2017, load capacity: 4,500 kg, Telescopic forks Dkjliot Tanlsmwq Nol ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Good Description: Capacity 4500 kg ISO 3A (51 cm) Opening range 1550-2350 mm ID OS1262