Used International 644 for sale (9,601)

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Bjlraertrzdsv Abowl Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 2005, operating hours: 11,190 h, Field of application: Internal logistics Please contact ATS Norway AS for more information Please provide reference number upon request: 19667 Bwslrasvyfhhov Abjl Specifications: Model year: 2005 Hours: 11,190 Engine power: 62 kW Weight: 7,500 kg Lifting height: 5.5 m Tires: See pictures for details Rotor lamp Pallet forks Ready for delivery Description: Toyota Forklift from 2005, with an impressive lift height of 5.5 metres. The truck has 11,190 hours and is equipped with a rotary lamp and pallet forks. It can be delivered fully certified and ready for delivery. Hours: 11190 Total Weight: 7500 Kw: 62

Condition: ready for operation (used), Year of construction: 2000, operating hours: 3,688 h, General Data Measurements width 1160 mm Measurements depth 5146 mm Measurements height 2365 mm Machine weight 9800 kg Belrewg H Uzoav Abjwl Injection Unit Screw diameter 60 mm Shot weight 644 g Stroke volume 678 cm³ Clamping Unit Clamping force 250 T Opening stroke 580 mm Max open daylight 1130 mm Mould height min 250 mm Mould height max 550 mm Additional Equipment Core Pull: 2 Air Circuit: 1 This Victor VS-250 hydraulic injection moulding machine was manufactured in 2000. It is ideal for precision plastic processing tasks. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2008, Condition: excellent (used), Drying Oven Cefla Typ:Aquadry LA/6 TT 10000 Serie no:10063/04 Serie no:10063/05 Year:2010 Aquadry LA is the best in-line system for drying water-based paints Description This combined in-line system associates the effectiveness of high speed hot air and high radiation capacity IR lamps. It is the most efficient system for drying water-based paints, because it cuts the times needed to evaporate any water contained in the finishes. The hot air ventilation creates a high flow-rate area. The optional infrared lamps can have differential wavelengths and penetration depths. Features flexible choice of hold times thanks to oven's modularity; short flash-off or total drying times; user-friendly operation and low maintenance; low initial investment costs; no emissions and/or radiation in the working environment. Application Fields -Panels -Flat panerls - Raised or curved panels -Internal matchboard -Flat doors - Raised doors - Indoor furniture -Corrugated roof panels and sheets -Furniture components - Packaging -Interior components Materials - Fiber cement and composite -Metal - Plastic - Wood and wood-based materials Inlet fans capacity 12000m3/h Inlet fans power 11kw Exhaust fans capacity 5000m3/h Exhaust fans power 1,5kw Heating units output 135,000 Cal/tim NIR lamps power 4,2/8,5 kw IRM lamps power 1,2/2,5/3,5 kw IRCK lamps power 3/6kw TL lamps power 40/140 w Bweloiwuq Hsrav Abol Maximum sound level 74,5db Compressed air 4-5 bar Length 10500 + 10500mm Width Hight Weight 1700+1700 Kg Stock no:2001395BXAHED NOTE: The above specifications may vary depending on the machine version

Condition: new, Functionality: fully functional, machine/vehicle number: 6SE01001AC237AA7, overall weight: 30 kg, total length: 800 mm, total width: 400 mm, total height: 450 mm, protection type (IP code): IP20, Frequenty converter / AC Drive Sinamics G180 6SE01001AC237AA7-Z Bwslraewhbtuov Absl Year 2015 Nw/unused

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 68 kVA, controller manufacturer: HEIDENHAIN iTNC 530, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, total height: 2,547 mm, total length: 5,866 mm, total width: 4,196 mm, table width: 500 mm, table length: 500 mm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 34,000 W, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Belrav Aowhdhzebowl Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workarea light CE conformity Cooling device blowing air through spindle center, selectable via M-function MPC – Machine Protection Control Paper band filter Infrared Probe Heidenhain TS640 Blum laser tool measurement Taper clear brushes Blum laser NT Hybrid Round pallet Storage (RPS 5) Measuring probe Heidenhain TS 640 Production package Internal cooling supply 40 BAR Cooling Cooling through the Spindle Center bar: 40 BAR Tank capacity: 980 High-pressure bar: 40 BAR Machine running times Under power: 95.210 Operating Time: 44.971 Rated power kVA: 68 Basic machine dimensions / weight Length mm: 5.866 Width mm: 4.196 Height mm: 2.547 Weight kg: 12.000

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Bjlsrtrxiorav Abswl Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, Year of construction: 2014, Serial number: WKESD0000059xxxx Bwelraevg Nvvov Abel Please contact ATS Norway AS for more information Please provide reference number upon request: 16102 Specifications: - 2014 model - Air suspension - Carrier unit - Tires (see pictures) - Length: 1404cm - Internal length: approx. 13.4m - Width: 260cm - Internal width: approx. 2.5m - Internal height: approx. 2.7m - Wheelbase: 131cm/131cm - Net weight: 8932kg - Max payload: 34,568kg - 3x 9-tonne axles - Ready for delivery Description: 2014 KRONE thermal trailer. 3x 9-ton axles. Brakes overhauled in 2022. Ready for delivery. Technical approved: Yes EU-approved until: 30.11.2025 Own weight: 8932 Total Weight: 43500 Payload: 34568 Width: 260 Length: 1404

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2930 mm Measurements depth 3210 mm Measurements height 2900 mm Machine weight 9200 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 28000 rpm Spindle motor power 38/28 kW Tool taper HSK-A63 Bwslrasv D R A Ssv Abel Number of axis 5 Movement X-Axis Movement 450 Y-Axis Movement 600 Z-Axis Movement 400 Table Outer length 400 mm Outer width 400 mm Number of tslots 5 Distance between 63 mm Media Chip conveyor Yes Internal cooling Yes Additional Equipment Tool Storage Capacity: 30 tools /Max Tool Weight: 6 kg / Max Tool Diameter: 80 mm / Max Tool Length: 250 mm Graphite Dust Collector Heidenhain Touch Probe TS 649 3D Quick Set for 5-Axis Calibration This 5-axis DMG DECKEL MAHO HSC 55 linear vertical machining centre was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO HSC 55 linear vertical machining centre if you are looking to get high quality milling capabilities. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 Bwelravoq Ehpao Absl No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: used, Year of construction: 2007, x-travel 1020 mm y-travel 560 mm z-travel 600 mm Control Siemens - Shopmill table-size 1.100 x 560 mm Boljwhf Ngorav Abowl max. table load 1.000 kg tool taper BT 40 spindle tunring speed 10.000 U/min spindle drive 11 kW number of tool places 24 Pos. Feed ( x / y / z) 36/36/24 m/min weight 6300 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - Internal Coolant (ICC) - Shopmill Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2016, Field of application: Freight transport Serial number: SCKD00000G0699381 Please contact ATS Norway AS for more information Please provide reference number upon request: 15198 Specifications: - 2016 model - 2 axle - Good tires - Hint - Remote control - New battery - Drivingbridges - Inside length: Approx. 360 cm - Internal width: Approx. 186 cm - Spare tire Bjlraevg Av Aev Abowl - Brake - Ready for delivery Description: IFOR Williams tipper trailer. It comes with bridges and remote control for tipping. Ready for delivery. Own weight: 990 Total Weight: 3500 Payload: 2510 Width: 205,3 Length: 496,5

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Bwslravjq H Spvs Absl Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: used, mileage: 900,000 km, Year of construction: 2009, Field of application: Freight transport Serial number: YS2R6X2000204xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19652 Truck specifications: - 2009 model - Km: Approx. 900.000 - Euro 4 engine - 500 HP - Automatic transmission - Retarder - 6x2 - Tires (see pictures) - Climate - Light - Radio - Delivery by agreement Specifications hinge: - 1990 model - 4 axles - Lift on 1 and 2 axles - Swing on 3rd and 4th axle - Internal length of stage 1: 4,464 m - Internal length of stage 2: 8,709 m - Total internal length: 13,230 m - Manual widening - Tires (see pictures) - Hydraulic driving bridges - Delivery by agreement Description: Scania R500 truck with 4 axles damm machine semi-trailer Both the truck and trailer are EU approved. Bwslrevyd T Neav Abol Should be seen. Delivery by agreement. Km: 900000 HK: 500 Technical approved: Yes EU-approved until: 16.04.2025 Own weight: 9860 Total Weight: 27000 Payload: 17065 Width: 255 Length: 720 Euro: 4 Gearbox: Automatic

Condition: used, mileage: 780,000 km, Year of construction: 2010, Serial number: YV2J1D1A8AA69xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18367 Specifications: - 2010 model - Km: approx. 780,000 - Gear: ishift - Tires (see pictures) - Inside length: approx. 760 cm - Internal width: approx. 245 cm - Internal height: approx. 270 cm - Two sets of tires - Full side opening - 2000 kg Zepro lift - Euro 5 - Length: 1,030 cm - Width: 255 cm - Wheelbase: 560 cm - Net weight: 10,150 kg - 4x2 - 337 hp - Tool box - Extra lights - Damage to mirror, see pictures - Rust, shown in pictures - Bed - Radio/cd - Climate/ac Bwjlovgx U Ujrav Abel Description: 2010 Volvo FM 330 cabinet truck with full side opening and lift. The truck comes with two sets of tires. It has recently had a 2-year check on the printer. Can be delivered within a short time. Km: 780000 HK: 337 Technical approved: Yes EU-approved until: 30.06.2025 Own weight: 10150 Total Weight: 10225 Payload: 9275 Width: 255 Length: 1030 Euro: 5

Condition: used, Year of construction: 2002, Field of application: Internal logistics Serial number: 3FD35-1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19534 Specifications: - 2002 model - Services taken by owner - Lifting height of 5200 mm - Weight 5740 kg - Lifting capacity of 2600 kg - Diesel - 120 cm forks - Ready for delivery Beljvyftqsrav Abswl Description: Toyota truck with lifting capacity of 2600 kg Lifting height is 5200 mm. A little engine oil is dripping from the engine. Otherwise, it functions as it should, according to the owner. Video included. Delivery by appointment Total Weight: 5740

Condition: used, mileage: 295,000 km, Year of construction: 2008, Serial number: WMA30SZZ38W12xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19323 Specifications truck: - 2008 model - About 295,000 km - Automatic transmission - Euro 4 engine - 480 Hp - Front suspension: Parabolic - Rear suspension: Air - Lift and turn on 4 axles - Tip - Fasteners in the box - Internal Width in the box: 2,416 m - Internal length in the box: 5,276 m - Tires (see pictures) - Plow surface plate - Extra hydraulics at the front - Plow rigged w/ joystick - Climate/ac - Radio - Diesel heater Bolravevg At Uj Abswl - Light - Service history - Ready for delivery Specifications 2620 HMF crane: - 2013 model - 26 T/M crane - 6 hydraulic extensions - 2 Outriggers - Scheme for grab - Grab is not included - Remote control - Ready for delivery Description: only one owner since new !! The truck is fully equipped with a joystick inside. Plow plate included. (but not pictured) The crane has a reach of 17 meters and is set up for grab. Errors and omissions may occur. Ready for delivery. Km: 295000 HK: 480 Technical approved: Yes EU-approved until: 08.07.2025 Own weight: 17670 Total Weight: 35000 Payload: 17255 Width: 255 Length: 899 Euro: 4 Gearbox: Automatic

Condition: used, mileage: 332,670 km, Year of construction: 2015, Serial number: VF6MFF5VR5352xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17322 Specifications: - 2015 model - 332,670 km - Eu approved to 08.11.2025 - Euro 5 - 150 Hp - 2 seats - Automatic transmission - Cruise control - Rear view camera - Internal width: 1,741 m - Internal length: 3,602 m - Internal height: 1,867 m - 1970 kg Net weight - Service history - Climate/ac - Light - Radio - Video - Delivery by agreement Description: All services taken at brand dealer. Everything works says the owner. Delivery by agreement Km: 332670 HK: 149 Technical approved: Yes EU-approved until: 08.11.2025 Bwslrjvg R Dnjav Abel Own weight: 1970 Total Weight: 3500 Payload: 1455 Width: 207 Length: 619,8 Inside width: 1741 Inside lenght: 3602 Inside hight: 1867 Kw: 110 Euro: 5 Gearbox: Automatic

Condition: used, mileage: 6,440 km, Year of construction: 2023, Field of application: Freight transport Serial number: YV2RT60D2PA32xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17578 Specifications: - 2023 model - EU approved - About 6440km - 6x4 - Lifting tandem - Euro 6 - 551 hp - Gear: Automatic - Suspension: full air - Tires: (see pictures) - Hydraulics - Mahler's turntable Bjlravsvg Nbro Abjwl - Break light - Extra light - Compressor horn - Nato connector x2 - 2 beds - Refrigerator - Climate/AC - Webasto - Ready for delivery Description: 2023 Volvo FH540 plow rig tractor. The car has only driven 6,440 km since it was taken out on Nov 23. Equipped with hydraulics and Mahler's plow plate. Ready for delivery. Km: 6440 HK: 550 Technical approved: Yes EU-approved until: 30.08.2025 Own weight: 11200 Total Weight: 31000 Payload: 19800 Width: 255 Length: 716,5 Kw: 405 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 2013, Serial number: WSJTKS324DTJ2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19134 Specifications: - 3 axle - Lift on 1 - Suspension: Air - 33 pallets - Inside length: Approx. 13.3 m - Internal width: Approx. 2.5 m - Internal height: Approx. 2.85 m - Carrier cooling/freezer unit - Good tires Description: Krone Cool Liner with cooling/freezer unit. Good tires and 33 pallets. Bolravjvgz Anj Abjwl Ready for delivery. Technical approved: no EU-approved until: 20.06.2024 Own weight: 9550 Total Weight: 45000 Payload: 35450 Width: 260 Length: 1379

Condition: used, mileage: 180,000 km, Year of construction: 2021, Serial number: W1T9630201051xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17610 Specifications: - 2021 model - Km: approx. 180,000 (will ke) - Suspension: Air - Automatic - Tires (see pictures) - Retarder - Carrier cooling/freezer unit - Zepro lift - Side door - Inside length: approx. 825 cm - Internal height: approx. 250 cm - Net weight: 13,320 kg - Euro 6 - Reversing camera - Extra lights - Compressor horn - Tool box - Radio/cd - Climate/ac - Service history Description: 2021 Mercedes Actros 4x2 box truck. Tarfurgo cabinet with Carrier fridge/freezer unit. The truxk has a service agreement and is ready to be put into operation. Delivery by agreement. Km: 180000 HK: 428 Technical approved: Yes EU-approved until: 06.08.2025 Own weight: 13320 Total Weight: 27000 Payload: 13605 Bwolrevgy Enoav Abol Width: 260 Length: 1086,5 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 2022, Serial number: WKVDAF3030011xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19622 Specifications: - 2022 model - Air suspension - Tires (see pictures) - Lift on row 1. - Turn on 3. - Liftable roof - Internal length: approx. 1,367 cm - Internal height: approx. 278 cm - Wheelbase: 131/181 cm - Weight: 7,880 kg - Tool cabinet Description: 2022 Kaessbohrer Curtainsider with liftable roof. It is lift on 1st and turn on 3rd. It is ready to be put into operation. Can be delivered within a short time. Technical approved: Yes EU-approved until: 20.04.2026 Bslrasvyfhnsv Abowl Own weight: 7880 Total Weight: 45000 Payload: 37120 Width: 255 Length: 1385

Condition: used, mileage: 200,000 km, Year of construction: 2021, Serial number: ZCFA875F40271xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18743 Specifications: - 2021 model - Km: approx. 200,000 - 4x2 - 2021 Hiab Zepro lift - Tires (see pictures) - Suspension: Steel front, air rear - Retarder - Side door on box - Norwegian cabinet Bwolrajvgzw Sov Abol - Internal width: Approx. 2,470 m - Internal length: approx. 6 m - Internal height: approx. 2,353 m - External height: approx. 3,459 m - Wheelbase: 418.5 cm - Automatic - Tool cabinet - 3 seats - Climate/ac - Radio - Service history is available - Ready for delivery Description: 2021 Iveco box truck with zepro lift. The truck has been kept in good condition and has been serviced at a specialist workshop. The box is very good (see pictures). Ready for delivery. Km: 200000 HK: 207 Technical approved: Yes EU-approved until: 27.09.2025 Own weight: 4990 Total Weight: 7500 Payload: 2435 Width: 255 Length: 810 Inside width: 2470 Inside lenght: 5997 Inside hight: 2353 Outer total height: 3459 Kw: 152 Euro: 6 Gearbox: Automatic

Condition: used, mileage: 248,000 km, Year of construction: 2016, Serial number: YV2V001A4GZ10xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18307 Specifications: - 2016 model - Km: approx. 248,000 - Transmission: automatic Bwjlrajvgziujv Abjl - Fresh air - Tires (see pictures) - Full page opening - 2500 kg Zepro lift - 20 pallets cabinets - Internal length: approx. 806 cm - Internal height: approx. 260 cm - Internal width: approx. 251 cm - Euro 6 - Length: 1,181 cm - Width: 260 cm - Wheelbase: 610 cm - Net weight: 10,300 kg - 4x2 - 326 hp - Bed - Radio/cd Description: 2016 volvo FE 320 with 20 pallet cabinets. It has full side opening and a 2500 kg Zepro lift. Can be delivered within a short time. Km: 248000 HK: 326 Technical approved: Yes EU-approved until: 23.09.2025 Own weight: 10300 Total Weight: 19500 Payload: 9125 Width: 260 Length: 1181 Euro: 6 Gearbox: Automatic

Condition: used, mileage: 388,000 km, Year of construction: 2008, Serial number: VF629AHA00000xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18445 Specifications: - 2008 model - Km: approx. 388,000 (want anything) - Suspension: Air - Gear: manual - Tires (see pictures) - Full side opening - 2000 kg Zepro lift - Inside length: approx. 762 cm Bwolrjvgxwcoav Abjl - Internal height: approx. 261 cm - Internal width: approx. 245 cm - Net weight: 9,650 kg - 4x2 - 320 hp - Reversing camera - Extra lights - Tool box - Bed - Radio/cd - Climate/ac - Services taken by owner Description: Renault premium cabinet truck from 2008. It has full side opening and a 2 tonne lift. Gearbox and clutch were changed around 200,000km. Can be delivered within a short time. Km: 388000 HK: 319 Technical approved: Yes EU-approved until: 30.03.2026 Own weight: 9650 Total Weight: 19000 Payload: 9275 Width: 255 Length: 1005 Euro: 4 Gearbox: Manual