Used Tos Fa3A-H for sale (31,594)

Year of construction: 2010, Condition: excellent (used), Functionality: fully functional, overall weight: 925 kg, drive type: Elektro, base plate length: 1,620 mm, floor slab width: 650 mm, product height (max.): 790 mm, rotational speed (max.): 1,465 rpm, 2 pieces Horizontal, cross-split volute casing pump in process design, with radial impeller, single-flow, single-stage, !!! Attention Data in the nameplate is the required operating point in the last application, it is not the best point of the pump !!! Manufacturer: KSB Model: CPKN-C3.1 100-400 Year of manufacture: 2010 Last pumped medium: + water / 0.01%SO2/pH=2 + clean water Chemically and mechanically non-aggressive to materials Cjb Hlofyn Rhs Akujgt Best flow rate: 120m³/h Delivery head best point: 52 meters (5.2 bar) Efficiency Best point: 67 % Flow rate operating point: 89.5m³/h Head at operating point: 55 meters (5.5 bar) Efficiency operating point: 63.5 % Pump speed: 1465 rpm Shaft seal: Double-acting GLRD Manufacturer: Burgmann Type: CARTEX-DN2/53-EX Material code: Q1Q1KMQ1/G1+BQ1VMG Operating mode: CB cartridge double GLRD with barrier pressurization Impeller type: closed multi-channel impeller Impeller diameter 396.0 mm Bearing bracket design: reinforced (heavy) Bearing bracket size: UP04 Bearing seal: Shaft seal ring Bearing type: Roller bearing Lubrication type: Oil on drive side Lubricant monitoring: Oil level regulator Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wearing wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: Duplex steel 1.4539 Nominal size of suction nozzle: DN 125 Discharge connection Nominal diameter: DN 100 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Gray cast iron Motor manufacturer: Siemens 1LG6 207 Efficiency class: IE 1 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power P2: 30 kW Shaft power operating point: 20.39 kW Shaft power best point: 24 kW Thermal class: F Motor protection class: IP56 Cosphi: 0.85 KSB mark: S6 according to KSB AN 1865-2 Surface preparation: Blasting, standard purity grade SA 2 1/2 Primer: 2-component epoxy zinc dust Intermediate coat: 2-component epoxy resin micaceous iron oxide Top coat: 2-component polyurethane (PUR) Color: Ultramarine blue (RAL 5002) KSB blue Total layer thickness approx. 260 µm The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: excellent (used), track width: 360mm shaft width: 350mm max disc diameter: 350mm Cgsbju Evqne Hl Akuet disc bore diameter: 80mm max cutting height: 120mm electric lifting of the saw shaft electric lifting of the body smooth regulation of feed speed feed motor: 2,5kW main motor: 45kW

Condition: new, New wheel 160 mm for tool milling machines produced by TOS / INTOS Žebrak. Available with or without hand crank available. Cob Hl Akodx Rzveuogt

Condition: good (used), Functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 400 mm, X-axis (longitudinal) 1000 mm Y axis (front) 400 mm Z axis (vertical) 400 mm Table length 1400 mm Table width 400 mm Max. load capacity of table 800 kg Spindle taper ISO 50 Max. shaft speed 1800 rpm Cgjb Hleukiw Re Akust Shaft motor power 7.5 kW

Condition: new, Year of construction: 2025, center height: 315,425 mm, grinding wheel diameter: 750 mm, grinding diameter: 630,850 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, Main technical data : Swing diameter mm 630-850 Distance between centres mm 3000,4000,500 Standard wheel size (diameter x width x bore) mm750/570 x 100 x 305 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°)+10/- 30 Workhead swivel (°)90 Tabel swivel (°)+6/-4 Workhead spindle speed, infinitely variable RPM 8 – 156 Workhead sleeve taper bore Morse 6 Tailstock sleeve taper bore Morse 6 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 7,5 Cjbopy A Iqs Hl Akuegt Wheelhead motor kW 22 Total power demand of machine kW 45 - between centres kg2 500 Weight of machine with standard accessories kg approx 17 500 Dimensions of machine approx. mm 12 000 x 2 980 x 2 200

Condition: reconditioned (used), Year of construction: 2024, Functionality: fully functional, grinding wheel diameter: 500 mm, total width: 2,300 mm, total length: 6,730 mm, total height: 1,800 mm, grinding diameter: 320 mm, workpiece weight between centers: 250 g, grinding wheel width: 80 mm, spindle speed (max.): 1,800 rpm, feed length X-axis: 350 mm, feed length Z-axis: 1,550 mm, Good morning, We have to offer a six months old CNC SWG32 x 1500 CNC machine with SIEMENS SINUMERIC 828D sL control (after a complete revitalization of TOS HOSTIVAR BUB32 machine) The machine is still in Lease at ING Lease. The machine has already been partially repaid, our company does not want to recover the repaid installments. The assignment of the lease applies only to the remaining installments to be repaid (the cost of the assignment is borne by our company). For more technical and financial details, I invite you to contact me at the e-mail address or by phone Specification of the machine: - Year of manufacture:2024 - Maximum grinding diameter: 320 - Maximum grinding length: 1500 - Supply voltage: 3 x 400V - Control voltage: 24V - DC - Metric system - Maximum permissible weight of objects clamped in the canine: 250 kg - Total travel distance in the X axis: 350mm - Rotation of the grinding wheel spindle: 50 - 1500 rpm (7.5kW) - Plunge grinding infeed speed range 0.03 to 20mm/min Cgob Hl Ajvkc D Ijkust - Wheel diameter: 500mm - Morse taper 5 - Measuring probe to determine the workpiece - Workpiece support - Electronic wheel (handheld panel)

Year of construction: 2009, Condition: refurbished (used), Functionality: fully functional, 1 piece liquid ring vacuum pump. Please read the description carefully to the end !!! The pump is not suitable for: Water, food industry and non-corrosive media. For these media, cheaper materials such as 1.4408 or 1.4571 are more suitable. The pump is made of the special material Alloy 59 !!! This alloy is used when the corrosion resistance of conventional chromium-nickel steels is no longer sufficient. Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Alloy 59 is used for: Environmental engineering, chemical industry (chemical processes with oxidizing and reducing acids, resistance to moist chlorine gas) and waste incineration plants. 2.4605 is mainly used in the chemical industry, the pulp and paper industry and in flue gas desulphurization plants. Excellent resistance to mineral acids such as nitric, phosphoric, sulphuric and hydrochloric acid and in particular to sulphuric/hydrochloric acid mixtures Typical applications are -plant components for organic chemistry processes with chloride-containing media, especially when chloride-based catalysts are used -Multipurpose plants in the chemical industry -Plant components in the fine chemicals and pharmaceutical industries scrubbers, heat exchangers, dampers, fans and agitators for flue gas desulphurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for marine diesel engines -components for seawater and concentrated brines -equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -sulphuric acid coolers -Pipelines in geothermal power plants -Components in flue gas desulphurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Cjb Hl Ajigqutjkusgt Motor power: 7.5 kW Voltage: 400/ 690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 ( Alloy 59 ) NiCr23Mo16Al All ball bearings new, mechanical seal refurbished by specialist company. Weight: 121 kg Dimensions: Length 960mm, width 370mm, height 370mm Connection: DN 50 ( 2")

Condition: good (used), Year of construction: 2024, Functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (max.): 1,200 rpm, table length: 1,800 mm, table width: 1,800 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 2,000 mm, workpiece weight (max.): 12,000 kg, Equipment: rotational speed infinitely variable, HEIDENHAIN TNC426 SYSTEM Cjb Hl Aksvan Nujujgt

Year of construction: 1992, Condition: good (used), Vertical head, support bearing for long fraesdorn, 3-axis digital display Fagor. Demonstration under power possible in our warehouse. Cgeb Hlonxinns Akuot

Condition: like new (used), 25 running meters pallet rack Nedcon New goods, see pictures! A top racking system of the major manufacturer NEDCON- this is a subsidiary of Voestalpine AG with headquarters in Holland. Height 3,5 m Depth 110 cm, blue beam length 2,7 m orange Beam with load / shelf 3050 kg, Cgjb Hl Akofi U Aijust negotiable price: € .2990,-- net ex stock Offer consists of: + 10 pcs. frames pre-assembled, depth 110 cm, height 3,5 m + 36 pcs. beams, length 2,7 m, 3050 kg load/shelf + 72 pcs. suspension locks + 20 pcs. Concrete anchor Load plates documents etc. are self-evident. Further accessories can be found in the accessories catalog. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads available on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: reconditioned (used), Year of construction: 2024, Functionality: fully functional, grinding length: 1,500 mm, grinding diameter: 400 mm, Technical data - grinding length [mm] - 1500 - grinding diameter [mm] - 400 Cgebevga Ayj Hl Akujt - range of table speed [mm/min] - 0 - 10 - smallest table travel [mm] - 0,001 - taper in tailstock sleeve {Morse no.] - 5 - grinding wheel dimensions [mm] - 500x80x203 - power of grinding wheel drive motor [kW] - 11 - power of grinding wheel drive motor [kW] - 3,5 - overall dimensions [mm]: length - 6650 width - 2300 (without desktop) height - 1800 - weight of machine tool [kG] - 6900 - central lubrication system; - Mitsubishi control system; - movement of the grinding wheel headstock - application of ball screw and servo motor; - table travel - use of ball screw and servo motor; - headstock of the workpiece - use of a new motor along with stepless speed control controlled from the operator panel; - "electronic wheel" for precise raids in both servo X and Z axes, e.g., for set-up work; We also make machines with Siemens 828D or 840Dsl control. It is possible to make machines up to a grinding length of 2000 / 2500 / 3000 mm.

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm Cgob Hl Aslkgvbekujt travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Year of construction: 1995, Condition: excellent (used), 2 centrifugal pumps Sulzer MB 80-230/3 flow rate: 79-89 m³/h delivery head: 240-230m max. temperature: 130°C Seal: mechanical seal with sealing water connection Cob Hl Aksd Sybusuogt drive power: Siemens 90kW speed: 2980 rpm

Condition: like new (used), 40 running meters pallet rack Nedcon New goods, see pictures! A top racking system of the major manufacturer NEDCON- this is a subsidiary of Voestalpine AG with headquarters in Holland. Height 5,5 m Depth 110 cm, blue beam length 2,7 m orange girder with load /shelf 3050 kg Negotiable price: € 6.290,-- net ex stock Offer consists of: + 15 pcs. frames pre-assembled, depth 110 cm, height 5,5 m + 84 pcs. beams, length 2,7 m, 3050 kg payload/shelf +168 pcs. suspension locks + 30 pcs. Concrete anchor Load plates documents etc. are self-evident. Further accessories can be found in the accessories catalog. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads available on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Csbsfkgpwo Hl Akujgt Fast - flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: new, Year of construction: 1995, operating hours: 0 h, 1 piece stainless steel volute pump from Ingersoll Dresser in excellent condition. On base plate with coupling Impeller and casing made of V2A stainless steel 316 (1.4401) Identical in construction to KSB CPK 100-250 Volume: 230 m³/h Conveying height: 70 m Speed: 2900 rpm Shaft power: 57 kW Ceb Hlsc Ivaas Akuogt Required drive power: 75 KW With base plate without electric motor. Electric motor can be installed by us.

Condition: like new (used), 50 rm pallet rack Nedcon New goods, see pictures! A top racking system of the major manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in Holland. Height 7 m Depth 110 cm, blue Beam length 2.7 m orange girder with load /shelf 3050 kg Negotiable price: € 10.150,-- net ex stock Offer consists of: + 19 pcs. frames pre-assembled, depth 110 cm, height 7 m +144 pcs. beams, length 2,7 m, 3050 kg payload/slot +288 pcs. suspension locks + 38 pcs. concrete anchors Load plates documents etc. are self-evident. Further accessories can be found in the accessories catalog. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads available on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. Cjb Hl Aksfkgq Souegt To get to our site, please click on our logo!

Year of construction: 1997, Condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for Ceb Hl Akjiuznusuegt - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: like new (used), 60 running meters tire rack Nedcon New & used, see pictures. Height 3 m Depth 50 cm Beam length 3.7 m Beam with load/shelf 1000 kg Cgjb Hl Aksi Hl T Ieujt Frame blue Beam painted blue Negotiable price: € 5.250,-- net ex stock Offer consists of: + 16 pcs. frames pre-assembled, depth 50 cm, height 3 m + 90 pcs. beams, length 3,7 m, 1000 kg load/slot + 180 pcs. suspension locks + 64 pcs. concrete anchors Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Year of construction: 2001, Condition: good (used), 2 pieces axially split volute casing pumps with motor and base plate. Last application as turbine. !!! Map as pump and as turbine as pictures !!! Manufacturer: KSB Type: Omega 350-360 A Delivery rate: 1728 m³/h Delivery head: 32 m Speed: 1450 rpm Year of construction: 2001 For turbine operation Engine: VEM G21R 280 S4 Capacity: 75 kW at approx. 20 metres head and 1600m³/h Voltage: 400 V For pump operation: required shaft power: 177 kW Cgebod Nqi Rs Hl Akust required electric motor: 200 kW NPSH Value: 6.9 Efficiency: 85.28%. maximum operating temperature: 140°C Speed sensor: Yes !! Price per piece !!

Condition: good (used), 25 running meters tire rack Used, very good condition, see pictures height 2,5 m depth 50 cm, field load 9000 kg beam length 2,1 m Beam with superimposed load / compartment 1000 kg Negotiable price: € 1.950,-- net ex stock Offer consists of: + 12 pcs. frames pre-assembled, 9t field load, depth 50 cm, height 2,5 m Csb Hl Ajfdik Ijkujgt + 66 pcs. beams, length 2,1 m, 1000 kg payload/slot + 132 pcs. suspension locks + 24 pcs. concrete anchors Load plates Other composition on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Year of construction: 1994, Condition: good (used), 1 piece high pressure radial blower volume flow: 3500 m³/h Total pressure increase: 10095 Pa Density of the medium 1,2 kg/m³. Temp. of the medium 20 °C Total mass: 363 kg Motor: VEM Type: KPER 180 M2 Cgebjcly N So Hl Akust Power: 22KW; 380/660V; 39.5/23A IP 55 Speed: 2935 rpm Mass: 165 Kg

Condition: like new (used), 300 running metres of Nedcon pallet racking New goods, see pictures! A top racking system of the large manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in Holland. Height 6,5 m Depth 110 cm, blue beam length 2,7 m orange Beam with load / shelf 3050 kg Negotiable price: € 50.280,-- net ex stock Offer consists of: + 108 pcs. frames pre-assembled, depth 110 cm, height 6,5 m + 642 pcs. beams, length 2,7 m, 3050 kg payload/shelf +1284 pcs. suspension locks + 216 pcs. concrete anchors Load plates, documents etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infill panels galvanised. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads possible on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Cgsb Hl Asfi U Afokuet Viewing possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for and offering numerous items from a wide variety of areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We clear and - or dispose also f [...]

Year of construction: 1993, Condition: excellent (used), Horizontal volute casing pump, single-stage with bearing bracket in GG25 grey cast iron, in process design. Volute casing with cast-on pump feet. Bearing: Deep groove ball bearing grease lubricated. Shaft seal: Mechanical seal Coupling: Flexible coupling Drive power: 18,5 kW Shaft power: 13 kW Delivery volume: 30 m³/h Delivery head: 80 m Impeller diameter: 245.0 mm Material housing/impeller: 1.4408 Cgjbogyt Tms Hl Akust Speed: 2920 rpm discharge flange: DN 50 PN 16 (LK 125mm) Suction flange: DN 65 PN 16 (LK 145mm) Weight: 225 kg Dimensions L/ W / H: 108cm / 45 cm / 50cm

Year of construction: 2007, Condition: excellent (used), 1 piece Radial blower with pre-shaft and cooling disc for warm and also dusty air. Manufacturer: Scheuch GmbH Austria Model: vdk90 1000-fb14 Volume flow: 71060 m³/h Pressure rise: 1673 Pascal at 250°C (0,637 kg/m³) Rotational speed: 1460 rpm Shaft power: 40,5 kW Weight: kg Year of construction: 2007 Insulation with rock wool and galvanized sheet. Cob Hljkvpfhe Akuegt Dimensions: Length: 3250 mm width: 2400 mm Height: 2000 mm Diameter suction side: 750 / 980 mm Shaft height without spring buffer foot: Dimension pressure side: 980 x 780 mm including compensator for pressure side. No damage or wear. Only the color inside is off due to the heat.

Year of construction: 1995, Condition: excellent (used), Only 1 piece is still for sale Volume flow 750 m³/min (45000 m³/h) pressure increase 5600 Pa; shaft power 84,6 KW; speed 1500 rpm. with swirl control vibration damper and intake silencer. Various bends and pipes are also available. Csbjdnk H Dj Hl Akujgt The casing and impellers are in excellent condition.