Used Tos Fa3A-H for sale (31,577)

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Csb E D Nol Hx Rpowmogt

Year of construction: 1990, Condition: good (used), HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories Cgsb E Defg Ep Do Nwmst MARCELS MASCHINEN CH

Condition: ready for operation (used), Functionality: fully functional, cutting height (max.): 250 mm, overall weight: 7,500 kg, saw blade diameter: 400 mm, cutting width (max.): 450 mm, power: 0.004 kW (0.01 HP), Two-shaft multi-saw 2x110 kW TOS SVITAVY PWR 422 - Czech production - twin-shaft - DTR documentation TECHNICAL DATA: - max cutting height: 250mm - track width: 450mm - shaft width: 450mm - disc bore diameter: 80mm - shaft diameter: 60mm - min disc diameter: 300mm - max disc diameter: 400mm - max width of input material: 860mm - min length of processed material: 1500mm * From above: - Rejectors: + - Drawing shaft, metal pneumatically pressed: + - rejects: + - drawing shaft, metal, pneumatically pressed: + - pressure: + - saw shaft: + - pressure: + - 2 pulling shafts, metal pneumatically pressed: + * Bottom: - metal roller, sliding: + - guide: + - rejects: + - track: + Cgeb Ejri Nvvo D Nwmst - saw shaft: + - track: + - infinitely adjustable feed speed on inverter: 4-40m/min - main motors: 2x110kW - feed motor: about 3kW - electric lifting of the body up/down: 0,55kW - electric adjustment of saw shafts: 2×0.18kW - central lubrication - diameter of the extraction stub: 2x300mm - dimensions L/W/H: 3400x2650x2200mm - weight approx: 7500kg

Condition: good (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,250 mm, table width: 1,600 mm, feed length W-axis: 710 mm, The machine is in good technical condition, currently disconnected control system Heidenhain iTNC 530. Clamping pallet size 2X 1250x1600 mm, magazine for 60 pcs. Spindle center cooling CHOV 20 bar, chip conveyor. Cgob E D Nov Ng Unswmet

Condition: refurbished (used), Year of construction: 1964, Functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade fair lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes overhauled. All machines were taken apart down to the last screw. Here is a run through of a general overhaul at our company: 1. Machine cleaning, dismantling of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and wedge strip 4. Scraping of the guide surfaces: spindle, slide, cross support and tailstock to geometric positions according to the accuracy protocol 5. Replacement: screw with nut, wedge strip and Multifix-Multifix base body for cross support (including 2 turning tool cassettes) 6. Complete dismantling and replacement of the necessary spare parts in the lock case, thread box, spindle box, gear box, tailstock, cross and upper support 7. Installation, if necessary replacement of racks, repair of lead and feed spindle 8. Complete bearing replacement in all machine components 9. Complete replacement of machine plates Cgeb E D Nsv Hzqxewmot 10. Priming of the machine, sealing, grinding, polyurethane top coat and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, wiring and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance in the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck protection with limit switch - Front chip protection slide mounted - Rear chip protection - Cover of the lead and feed spindle - Brakes after emergency stop within 2 s

Condition: good (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 20,000 kg, Spindle diam. 130 mm Spindle nose attachment iso 50 X-axis stroke: 4000 mm Y-axis stroke: 3000 mm (vertical) Z-axis stroke: 2000 mm W-axis stroke: 800 mm Spindle motor power 37 kw Spindle speed 0 - 3000 rpm Table 1800 x 2500 mm Table capacity 20 tons CNC HEIDENHAIN TNC I 530 Csb E D Njvxvcaswmegt ATC 60 places Chip conveyor Electronic handwheel Coolant through spindle Spindle sleeve

Condition: excellent (used), Year of construction: 2001, x travel 1600 mm y travel 1000 mm Cob Esvwgpue D Nwmsgt z travel 780 mm - number of processing axes (excl parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm - table surface (left-right) 1000 mm - table surface (front-back) 1000 mm - workpiece load (max) 6000 kg - - positioning/indexing 0.001 ° - - positioning/indexing 2.5 ° - - positioning/indexing 2.5 ° - spindle revolutions (max) 2500 /min - drive power 22 kW - number of positions 60 - number of store positions 2 - pallet length 1000 mm - pallet width 1000 mm - number of pallets 2 - space requirements -left/right- 6400 mm - space requirements -front/back- 6900 mm - total height 4000 mm - total weight approx. 26000 kg control HEIDENHAIN TNC 426 The machine is in very good condition and available immediately.

Condition: used, Year of construction: 2008, roll diameter 300 mm Wheel width / mm Cjb E D Nst Ukxqowmjgt Distance of shafts / Roller block turning device EU-RB 3000MS Gesamtabmessung: 2060x1002x555mm Adjustment of the roller brackets: manual, centric Locking: secured locking pin Weight: 750kg Max. Max. load capacity: 3000kg Workpiece diameter: 150 x 3000mm Roller diameter: 300mm Torque on the drive roller: 500 Nm Peripheral force on the drive roller: 3300N Feed speed: 100 - 2000 nm/min Supply voltage: 230 V/50 Hz Connected load: 2.3 kVA

Condition: good (used), Weishaupt oil burner L9T-320kg/h Cgjbjpiqtcs E D Nwmjt

Condition: good (used), Year of construction: 2002, Number of boring spindles 4 St. Working width 220 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 0,75 kW Feed speed m/min. Csb E D Nwou N Iwnsmsgt total power requirement kw Dimensions (L/W/H) mm weight of the machine ca. kg

Condition: good (used), turning height: 1,335 mm, workpiece weight (max.): 12,000 kg, turning diameter: 1,500 mm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, spindle speed (max.): 400 rpm, table diameter: 1,250 mm, Tos Hulin Skq 12 retrofitted in 2018 with: - Fagor 8025 T cnc, TS - Maximum turning diameter 1500 mm - Maximum turning height 1030 mm - Maximum workpiece height 1335 mm - Hydraulic chuck diameter 1250 mm - Spindle motor power 40 KW - Rapids 8000 mm/min - Ram stroke 1000 mm Ceb Esunhnve D Nwmegt - Vertical traverse stroke 800 mm - Chip conveyor - Integral fairing Free deferment in 12/24 months

Condition: used, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 20,000 kg, spindle diameter: 130 mm, spindle speed (min.): 3,000 rpm, Spindle diam. 130 mm Spindle nose attachment iso 50 Cgob Esv H A Hne D Nwmst X-axis stroke: 5000 mm Y-axis stroke: 3000 mm (vertical) Z-axis stroke: 2000 mm W-axis stroke: 800 mm Spindle motor power 37 kw Spindle speed 0 - 3000 rpm Table 1800 x 2500 mm Table capacity 20 tons CNC HEIDENHAIN TNC i 530 ATC 60 places Chip conveyor Electronic handwheel Coolant through spindle Spindle sleeve

Condition: used, Year of construction: 1959, turning diameter over bed 380 mm turning diameter over slide rest 215 mm turning length 1000 mm weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m The L&Z lathe is in good condition. Scope of delivery incl. extensive accessories and cabinets Cgjb E Dovwgmas Nwmet - 3-jaw chuck - 4-jaw face plate - steady rest

Year of construction: 1980, Condition: used, turning diameter over bed 655 mm turning diameter over slide rest 390 mm turning length 1250 mm spindle bore 82 mm spindle turning speed range 9-1120 U/min feeds 0,049-3 mm/U total power requirement 12 kW Ceb E Dslc Uk Ie Nwmegt weight of the machine ca. 5,2 t required space 3,5 x 1,9 x 1,7 m m

Condition: good (used), Riello RLS50 oil+gas burner 581kw ca.15kg/h Cgsb E D Nwspiqiasmet

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,000 mm, spindle diameter: 130 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, travel distance W-axis: 800 mm, workpiece weight (max.): 12,000 kg, quill stroke: 800 mm, Equipment: cabin, TOS VARNSDORF "T" BORING MACHINE MOD. WHN 130Q Numerical control Heidenhain TNC 640 X-axis travel 2,500 mm Y-axis travel 1,600 mm Z-axis travel 1,000 mm W-axis travel 800 mm Rotary table size 1,600 x 1,800 mm Load capacity 12,000 kg X, Y, Z, W axes feed 10,000 mm/min ISO 50 Din 69871/A spindle Boring spindle diameter 130 mm Rotation speed 3,000 rpm Spindle motor power 37 Kw Tool magazine 40 positions COMPLETE WITH: - 24" TFT CNC display and HR 510 2 remote handwheel with 3 meter cable Cjb Eovy T Ene D Nwmogt - Coolant through the spindle 70 bar adjustable - Heidenhain optical scales pressurize resolution of 0.001 mm - Chip conveyor - Operator cabin - Movable protective cover for the workspace - Renishaw RMP 60 Q 3D measuring probe - Front and side machine enclosures YEAR 2024

Condition: used, machine/vehicle number: 0257391, height of centers: 160 mm distance between centers: 1500 mm grinding wheel measures: 500 x 127 x 40 mm Cobsgayiwo E D Nwmogt grinding wheel rotations: 1570/2050 Upm electrical connection: 380 V kW space needed: 4400/6400 x 2000 x 1400 mm weight: ca. 4000 kg

Condition: excellent (used), Functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, For sale is a used lathe from the Czech manufacturer TOS, model SU 100, with extensive equipment as shown in the photos. Technical specifications: Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Cgsb E Dev Epk Do Nwmot Extensive equipment as shown in the photos: 1 x 4-jaw chuck 2 x steady rest 1 x travelling steady

Condition: ready for operation (used), Spindle bore: 60 mm Csb E Dsiqtzkj Nwmjgt Swing diameter over bed: 500 mm Center length: 1000 mm Dimensions: 3100x1400x1600mm

Condition: good (used), Year of construction: 1983, FGSH 50 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Double-torsion head (new bearings, new gears). Beam to the level with the eyepiece. Ceb E D Nodqp Eujwmegt Parameters: Table 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Speed ​​range 45-1400 rpm. Main engine power 15 kW. The demand for a power of 23 kW. Dimensions: Length X Width X Height: 3200 X 3475 X 2620 mm. Weight 6500 kg.

Condition: good (used), Riello oil burner 482M1,power 2370Kw,220kg/h Ceb E Depir Rye Nwmegt

Year of construction: 1986, Condition: excellent (used), machine/vehicle number: 12024, table mounting size: 290 x 1250 mm table movement x: 800 mm table movement y: 360 mm table movement z: 450 mm milling head swivelling by: 90/45 ° spindle taper: ISA 40 spindle turning taper: 56 - 4500 rpm tailstock stroke: 125 mm tailstock carriages: 0,035; 0,14; 0,7 mm/min spindle drive: 1,8/2,4 kW space needed: 2000 x 1900 x 2300 mm weight: 1700 kg Cgeb Esf Tc R Us D Nwmst

Condition: good (used), Grindable, largest diameter: 200 mm Center distance: 450 mm Cjb E D Nwolz Nxwsmogt Weight of the machine approx: 2, 2 t Machine dimensions:

Year of construction: 1983, Condition: good (used), FGSV 32 TOS KURIM milling machine. Cgeb E D Nsh Ir Rmowmot Year of manufacture 1983 (CZE). Parameters: Table 320 x 1400 mm. Travels: X - 1000 mm, Y - 400 mm, Z - 450 mm. ISO 50. Speed ​​range 35-1800 rpm. Distance between spindle and table 140 - 590 mm. Distance between spindle and column 120 - 520 mm. Max. table load 500 kg. Main engine power 11 kW. The demand for a power of 15 kW. Dimensions: Length X Width X Height: 2735 X 2425 X 2475 mm. Weight 4200 kg.

Condition: excellent (used), Functionality: fully functional, center height: 160 mm, workpiece weight (max.): 250 kg, grinding length: 1,500 mm, grinding wheel diameter: 203 mm, total width: 23,500 mm, total length: 62,500 mm, total height: 17,000 mm, grinding diameter: 320 mm, spindle speed (max.): 1,470 rpm, table speed: 5 mm/min, overall weight: 5,900 kg, year of last overhaul: 2016, power: 7.5 kW (10.20 HP), BHU 320 x 1500 roller grinder. Prod. by TOS Hostivar Czech Republic - Major overhaul 2016. Grinding diameter 320 mm Grinding length 1500 mm Center height 160 mm Dimensions of the grinding wheel 500 x 80 x 203 mm Speed of the grinding spindle 1470 rpm. Grinding spindle - quick adjustment 60 mm Table speed - return 0.005 - 0.05 mm Automatic feed 0.1 - 5 mm/min Workpiece weight max. 250 kg Grinding head rotatable +/- 45° Taper in tailstock MK 5 Workpiece advancement rotatable 90 degrees Cgjb E D Nwjtzwy Iomet Grinding spindle drive 7.5 kW Weight of the machine 5900 kg Overall dimensions (L X W X H) 6250 x 2350 x 1700 mm