Used Tos Fgsh 50/63 for sale (90,283)

Condition: new, Year of construction: 2024, Functionality: fully functional, New machine 24 months warranty Advantages: + Solid construction + Boiler, center rod and spiral made of stainless steel + Drive with two motors (spiral & bowl) Fgjlrhpqjhyc Thswob + Soft-close flour dust hood, with automatic switch-off + Mobile machine, on swivel wheels, with fixed bowl + Dirt protection cover for adjustable feet + Short kneading time with excellent results + Switch for manual or automatic operation + 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + fast supply of spare parts within 1-2 working days Program control, included in the price: - Panel with simple program control - up to 99 different mixing/kneading programs can be saved Technical data: - Flour capacity: 4 - 30 kg - Dough capacity: 6 - 50 kg - Bowl volume: approx. 80 liters - Ø outer edge of bowl: 585 mm - Motor power: 3.75 kW (kneading spiral & bowl drive) - RPM at 50Hz (1st / 2nd gear): 135 / 270 - Connected loads: 400V - 3Ph - 50Hz - 16A CEE plug - Dimensions in cm: 63 x 101 x 122 (WxDxH) - Height when flour dust hood is open: 160 cm - Height top edge of boiler: 79 cm - Net weight: 320 kg

Condition: used, Functionality: fully functional, Year of construction: 1991, operating hours: 13,070 h, load capacity: 1,000 kg, lifting height: 3,000 mm, free lift: 1,450 mm, fuel type: electric, mast type: duplex, construction height: 1,970 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Duplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical Condition: Very good Front Tire Type: Super Elastic Front Tire Size: 18x7-8 Rear Tire Type: Super Elastic Rear Tire Size: 18x7-8 Battery Voltage: 24V Battery Ah: 625Ah Battery Manufacturer: IBV Fjlrhpqswacyaewogb Battery Type: PzS Battery Year of Manufacture: 2020 Description: In addition to this model, we also offer other forklifts and warehouse equipment. Our models are workshop and FEM4.004 tested. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used vehicle, even if you don't purchase it from us. Hire purchase and financing at favorable terms are available upon request. We would be happy to provide you with expert and detailed advice on our vehicles. ...

Condition: as good as new (ex-display), Year of construction: 2025, Functionality: fully functional, This degreasing system operates under vacuum (pressure swing process) with modified alcohol or hydrocarbon. (New system) 12-month warranty Immediately available from St. Gallen With vacuum pressure swing process System process: spray, immersion, ultrasonic, and steam degreasing including vacuum drying. Specifications: Ultrasonic 2*1000 W - 25 kHz Double fine filter Chamber door in bulletproof glass 2-tank system, capacity 400L Double distillation and residual distillation Automatic oil discharge 3-stage water separation Fgjlrhoqy H H Depqwjb Electropolished chamber for ultra-fine cleaning Screw vacuum pump (latest generation) Loading trolley 2 wash baskets, mesh size 7mm and 12mm 12" touch panel Prepared for automatic loading Maximum basket size (480 x 320 x 200 mm) Maximum load weight 100 kg System dimensions 2400 x 2400 x 3300 mm System weight (basic version) 2500 kg Color RAL 9003 (white) RAL 7021 (black)

Condition: good (used), Year of construction: 1994, Manufacturer: ZANCHETTA Machine type: GV 50 Rotomix Year of manufacture: 1994 Capacity:50 liter Fgjlrhpjnp Hrqjqwsb Minimal operating capacity: 12 liter Maximal operating capacity: 33 liter Inside depth: 450mm Inside height: 320mm Weight: 850 kg Parts of machinery: 1.Roto mixer Granulator 2.Oil dynamic unit 3.Vacuum / condensation unit 4.Heating unit

Condition: ready for operation (used), Year of construction: 2000, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1250 mm Y-AXIS TRAVEL: 700 mm Z-AXIS TRAVEL: 750 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 850 mm RAPID FEEDS X-Y-Z: 15 m/min SPINDLE: 4000 rpm; 26 kW; ISO 50 - DIN PALLET: N.2 TABLE SIZE: 650 x 1400 mm MAX ADMITTED LOAD: 1500 Kg HIGH PRESSURE COOLANT: 30 Bar TOOL MAGAZINE: CHAIN-TYPE ; 41 POS MAX TOOL DIAMETER: 120 (200) mm MAX TOOL LENGHT: 400 mm MAX TOOL WEIGHT: 20 Kg CONTROL UNIT: FANUC 16i-M WEIGHT: 16750 Kg OVERALL DIMENSIONS: 7135 x 5300 x 3426 mm ACCESSORIES: SWARF CONVEYOR ; Felsh Stvforhpqwogb GEAR BOX

Condition: excellent (used), Year of construction: 1986, bore diameter 65 mm throat 380 mm Control PLC-Steuerung bore spindle turning speed range 63 - 1600 U/min table-size 630 x 500 mm rapid traverse Z-axis 4,75 m/min boring feeds: 0,05 - 0,56 mm/U total power requirement 9 kW weight of the machine ca. 2,0 t dimensions of the machine ca. 1,50 x 1,20 x 2,95 m Drilling capacity in steel ST60: 65 mm Drilling capacity in cast iron GG20: 80 mm Thread cutting ST60: M68 Thread cutting GG M72 SPS-controlled automatic drilling machine with Fslsucgqqjrhpqwsgb Drilling/deep hole drilling/thread cutting Sequence: 1st rapid traverse to start position 2. switch on the speed 3. switch on the drilling feed 4. drilling until the drilling depth is reached 5. return in rapid traverse to start position Manual operation possible (speed and direction of rotation, rapid traverse positioning, Switching the drill feed on/off) Selection of the drill feeds and spindle speed manually via gear shift. Pole-changing motor with 1,500/3,000 rpm. with mechanical overload clutch

Year of construction: 2023, Condition: new, New device 12 months warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + rapid swelling during mixing without ice + woollier doughs due to freshly chilled, liquid ice water + exact dosing via water mixing and dosing device possible + water-bearing parts are made of stainless steel and require no cleaning + hygienically clean drinking water Felrhpoivdvvsqwogb Langheinz ice water systems are characterized by: + constant low water temperatures + powerful chillers + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel refrigeration evaporators + multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + drain cock in ice water bath + high flow rate + compact dimensions + easy to clean surface structure + low energy consumption SPECIAL accessories, optionally available at extra charge: - Stainless steel wall bracket (for model L130 + L170): + 349,-- € net - Machine table (for model L130 + L170): + 469,-- € net - Switching valves 3-way --- for water mixing and dosing units with only 2 inlets (cold / warm) + 279,-- € net Technical data: - Batch size (recommended): up to 50 liters - Continuous capacity*: 115 liters / hr. - Peak cooling capacity*: 330 liters / hr. - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1,86 kW - Refrigerant: R290 (new 2021 standard!) - Connected load: 230 V - 50Hz - Power consumption: 1,45 kW - Water connection: 1/2 inch - Water flow at 2 bar: 20 liters / min - Dimensions: 560 x 590 x 900 mm (LxWxH) - net weight: 80 kg - Energy consumption at 100 liters: 1.5 - 2.5 kWh * at +17,5°C inlet and +2,5°C outlet

Condition: used, Year of construction: 2017, operating hours: 6,901 h, load capacity: 5,000 kg, lifting height: 3,280 mm, fuel type: electric, mast type: standard, construction height: 2,250 mm, Visual condition: normal, Technical condition: normal Fgjlrjuuwccjhpqweb

Condition: used, total height: 2,150 mm, total length: 2,600 mm, total width: 2,600 mm, Empty weight: 1.500 kg Manufacturer: JUNG Type: HF-50-RD Travel: 500x200mm Max. vertical movement grinder: 280-330mm Grindings speed: 1000-4000/min T-slot Table: 700x200mm Incl. Magnet: Tiltable Magnet dimensions: 500x200mm Incl. Diaform - Documentation available: Yes - Transport dimensions: 2600mm x 2600mm x 2150mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren Folrhpqsv Umgzowogb

Condition: good (used), pressing force: 50 t, ram stroke: 320 mm, Capacity 50 Ton Throat 225 mm Adjustable stroke 8 - 100 mm Number of strokes 320 p/min Fgslrhpjtt A T Tsqwsb Ram size 300 x 280 mm Table size 500 x 800 mm Machine LxWxH: 160 x 120 x 260 cm Machine weight: 6 Ton

Condition: used, Year of construction: 1996, material width 500 mm material thickness 0,3 - 3,0 mm no. of straightening rolls 5 straightening roll diameter 40 mm number of draw-in rolls 2 diameter of draw-in rolls 80 mm material cross-cut 600 mm² Fgelrhpqovuum Nowjb material thickness at 500 mm material width 1,2 mm material thickness at 200 mm material width 3,0 mm power requirement 4,0 kW weight 2,0 t dimensions (WxDxH) 1,5 x 1,5 x 1,9 m with motor, upper straightening rolls individually manually adjustable, neumatic adjustment of the infeed rolls, coil loop control via ultrasonic sensor as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1972, throat 300 mm short circuit voltage 118 kVA Fgslrhpetn Enrjqwsb voltage 380 V rated capacity bei 50% ED = 50 kVA weight of the machine ca. 700 kg dimensions of the machine ca. 0,65 x 1,20 x 2,00 m

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine Fgolsvxhaqjrhpqweb 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (100 - 1400 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 70 - 1400 grams (depending on dough) Piston: 1 dough part piston (diameter 70 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: used, mileage: 162,050 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, overall weight: 5,000 kg, first registration: 12/2018, emission class: euro6, color: white, number of seats: 3, total length: 4,650 mm, total width: 1,800 mm, total height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 9198D ----Why Automobile Ataei GmbH? One of the largest commercial vehicle exhibitions in Germany. Always over 400 vehicles immediately available. Largest selection - Best price. More than 1,000 satisfied customers per year - Top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----- * TOP CONDITION * 1st owner, German vehicle * Completely serviced, only at VW * New brake discs and pads front and rear * Body: Maxi overhang extra long * Loading area: Length 4.65 m, height 1.95 m, width 1.80 m * Automatic transmission (8-speed) * Fixed tow ball hitch, increased towing capacity 3.5 t * Rear-wheel drive * Permissible vehicle weight Total weight 5,000 kg * Payload 2,332 kg * Air conditioning (Climatic) * ErgoComfort suspension seat, driver's side (20-way seat adjustment) * Heated driver and front passenger seats * Passenger double seat with storage compartment and backrest that folds into a side table * Cruise control including speed limiter * Lane Assist * Composition Audio audio system (radio, SD card interface, MP3 playback function) * Electric exterior mirrors Adjustable and heated * Cargo partition with window * Multifunction steering wheel * Multifunction display plus * Rear right step * Digital tachograph * Rear wing doors without glass * Wooden floor Folrhpsvhw N Heqwogb * High plastic cargo area trim * Hinges for rear doors with increased opening angle * Hill start assist * Brake assist (HBA) * Crosswind assist * Area monitoring system (Front Assist) with City emergency braking function * Speed limiter system 90 km/h * Interior lights in driver's cab: LED * Interior lights in cargo/vehicle area: LED * Fuel tank: 75 liters * Truck registration * Twin rear tires * Engine 2.0 liters - 130 kW TDI * Wheelbase 4490 mm * Low emissions according to Euro 6 emissions standard * New MOT/AU on request ----Warranty & "TÜV Professional Check" are of course available from us! We'd be happy to accept your vehicle as part payment! We can also create a customized financing or leasing offer for you! No down payment, redeemable at any time, and with special repayments. Address your requirements to our sales team; we'll be happy to advise you. ----Arrange a test drive and let us convince you of the quality of our vehicles. Appointments: Mon.-Fri. from 8:30 a.m. to 6:00 p.m. Sat. from 9:30 a.m. to 1:30 p.m. ----Visit us at We look forward to your visit! ----Subject to errors and changes. The equipment offered online is not part of the contract. The equipment must be inspected on site.

Year of construction: 2000, Condition: used, Price: On request Working width 830 mm Working height 500 mm Power (kW) 5 kW Working depth 600 mm Mounting SK-40 Number of axes 3 Metal milling machine Model: Conventional Manufacturer: KLOPP Type: UFB Travel: 830x600x500mm Table dimensions: 1000x560mm Milling head rotatable Intake: SK-40 Spindle motor: 5.5kW Spindle speed: 31.5-1400rpm Fgslrhpqev Ul Taeweb Machine weight: 3000kg - Year: 2000 - Documentation available: No - Serial number: 50 EVO Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: new, Year of construction: 2025, Power at 50%: 50kVA Short circuit-current: 19kA Electrode force: 470daN / single stroke Throat depth: 250mm --- Weld control: WS 708 (7-times, 8-program) --- Extra Equipment: - two-hand-start / foot pedal - main switch --- Warranty: 6 months --- Folrjtq Ezxohpqwegb Spotwelding electrodes + spare parts at stock

Year of construction: 1992, Condition: good (used), machine/vehicle number: 92-2083, Twist drill grinding machine Offer number: 20063 Make: SCHANBACHER Type: S 3-50 machine no.: 92-2083 Year of construction: 1992 Fgjlrhpjfhy N Ssqwjb Technical data: - simple service - Grinding process by means of gear motor - Twist drill dimensions 3 - 50 mm - acute angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - Geared motor for swivel movement 400 V / 0.12 kW - Grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - Space requirement approx. W 810 x D 570 x H 1260 mm - Weight approx. 120 kg - with - Clamping device - Presetting device

Year of construction: 1996, Condition: used, drill diameter 3 - 50 mm drilling length 500 mm lip angle 90 - 140 ° voltage 380 V weight of the machine ca. 120 kg dimensions of the machine ca. 0,80 x 0,60 x 1,30 m Fgslrhpqjp Raizewjb Serial-No.: 76658

Condition: used, Functionality: fully functional, Year of construction: 2023, operating hours: 165 h, load capacity: 5,000 kg, lifting height: 5,990 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,600 mm, fork length: 1,200 mm, total length: 2,600 mm, drive type: Elektro, construction width: 1,400 mm, net weight: 7,643 kg, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: As good as new Fgslrhpjt Rlu Seqwsb Technical condition: Very good Front tires Type: Non Marking Front tires Size: 355/50-15 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 21x8-9 Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 930Ah Battery Manufacturer: Still Battery year of manufacture: 2022 Battery condition: 80 - 100% Sideshift, Fork positioner, 3rd valve, 4th valve, Rear working lights, Front working lights, Full cab,

Condition: used, Year of construction: 1999, total width: 2,100 mm, total height: 1,200 mm, total length: 1,050 mm, Weight: 700 kg - Year: 1999 - Documentation available: No - CE mark available: Yes - Serial number: 629 - Transport dimensions: 1050mm x 2100mm x 1200mm (l x w x h) - Transport weight: 700kg Feljv Ulvborhpqwjgb - Transport packages: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 90650664, Offer 24402 Technical data: - Drilling capacity in steel 50 mm - Drill spindle holder MK 5 - Drill spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. distance - Spindle - base plate 350 - 1250 mm - Vertical stroke of the arm 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drill spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW Fgolrhpeuzvzxsqweb - Cube table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg

Condition: used, Functionality: fully functional, machine/vehicle number: Li-Ion Ready, Year of construction: 2022, operating hours: 50 h, load capacity: 5,000 kg, lifting height: 4,425 mm, free lift: 1,375 mm, fuel type: electric, mast type: triplex, construction height: 2,225 mm, fork length: 1,200 mm, total length: 2,600 mm, drive type: Elektro, construction width: 1,400 mm, net weight: 7,643 kg, Electric 4-wheel forklift Chassis number: Li-Ion Ready Load center: 500 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: As good as new Technical condition: Very good Front tires Type: Non Marking Front tires Size: 355/50-15 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 21x8-9 Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 930Ah Battery Manufacturer: Still Battery type: PzS Battery year of manufacture: 2022 Fgslrhpou Txl Ieqwsb Battery condition: 80 - 100% Sideshift, Fork positioner, 3rd valve, 4th valve, Rear working lights, Front working lights, Full cab,

Condition: good (used), Year of construction: 2013, machine/vehicle number: 011-113081603, Offer 23370 Technical data: - max. load capacity 50 kg - face plate diameter 340 mm - Spindle shaft diameter 25 mm - Face plate can be swiveled by handwheel 0 - 90 ° - Rotation electr. infinitely variable 0.5 - 3 rpm - Right + left rotation - E. - foot switch Felrhpqjq Ev R Sjwogb - Earth cable - Welding current transmission approx. 350 A - Drive 230 V - Table height in horizontal position 760 mm - Space requirement approx. W 650 x H 760 x D 600 mm - Weight approx. 150 kg

Condition: used, Functionality: fully functional, Year of construction: 2021, operating hours: 1,820 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,900 mm, fuel type: diesel, mast type: triplex, construction height: 2,780 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, total length: 4,910 mm, engine type: Perkins STB3B, drive type: Diesel, construction width: 1,720 mm, net weight: 8,695 kg, All-terrain forklift Load center: 600 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Fslrhpqsu Nnzyowegb Transmission: Hydrostat Speed class: 15 Technical condition: Very good Front tires Type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The MSI 50 is a unique semi-industrial mast truck that can lift up to 5 tons. It can move easily on paved or semi-paved surfaces thanks to its two drive wheels and a choice of tires that allow it to be adapted to different applications. This telehandler is ideal for the recycling sector or the timber industry. It has a hydrostatic transmission, which gives it great smoothness when approaching and picking up loads, thus increasing work efficiency. The workstation is accessible from two sides and has a spring-mounted cab to limit the effects of vibrations on the operator. Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab, full free lift,

Year of construction: 1985, Condition: good (used), machine/vehicle number: 013125, Offer 21283 Technical data: - Grinding wheel diameter approx. 500 mm - grinding wheel width approx. 50 mm Fgelrhpsi Daw Tsqweb - grinding wheel bore approx. 127 mm - wheel speed 950 rpm - drive 400 V / 3,3 kW - working height approx. 800 mm - working depth / protection depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg