Used Maho Mh500C Cnc for sale (8,676)

Condition: used, Year of construction: 2010, Incl. tool work surface: 3005 x 1250 mm with 12-position tool changer Storage location: Supplier Djbu Ur Sswgnrzj Ssut

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall Duobu Urewbvhao S Sst The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 only 110 operating hours! Equipment and technical data: X = 1800 mm Y = 900 mm Z = 80 mm in 18 mm Koskisen panels consisting of a milling table (X-axis), a portal (Y-axis) and a Z-axis. Milling bed in 19 mm MDF as a sacrificial plate with guide rails and slotted nuts, as a clamping method. Base frame with struts, cast with polymer concrete, prepared for transport by pallet truck or forklift. Mechanical set consisting of profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Dsbu Ureryyhkj S Sout Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control set consisting of a Triple Beast, for controlling 3 axes, with Ethernet connection. Leadshine power amplifier for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as a switching power supply with 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wire cables, wire end ferrules, control cable, shrink tubing and cable lugs. Fully installed in an aluminum housing including electrical kit and emergency stop. 21.5 inch monitor as a built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic desk. Tool length sensor for determining the length and changing the active zero point offset. Special equipment: High frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solid bodies Location: Switzerland Availability: Short term

Condition: ready for operation (used), Year of construction: 2008, Kern Micro- & Feinwerktechnik EVO 4-Axis CNC Milling Machine Dimensions: - Base machine, ready for operation with additional units: 3300mm x 3400mm x 2400mm (W x D x H) - Base machine, footprint only: 1200mm x 1200mm x 0 (W x D x H) - Control cabinet including casters: 1200mm x 600mm x 1600mm (W x D x H) Dsbu Uewgi N Isr S Ssut Weight: approx. 3500 kg High precision with automatic tool changer. X-stroke: 300mm Y-stroke: 280mm Z-stroke: 250mm Rotation speed: 0 rpm - 50,000 rpm Year of manufacture: 2008 Control: Heidenhain iTNC 530 Blum P87.0634-015-NT Laser Minimal quantity lubrication Approx. 40 HSK 25 tool holders This machine was only used to mill plastic. You are welcome to come by for a viewing. We would be happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 7 [mm] - Max. machining length : 125 [mm] - Spindle speeds : 16.000 [rpm] - Spindle power : 1.1 / 1.5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 7 [mm] - Spindle speeds : 16.000 [rpm] - Spindle power : 1.1 / 1.5 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 9.000 [rpm] - Live tools power : 0.35 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 3 END ATTACHMENT - Number of positions : 3 POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1480 x 895 [mm] - Machine height : 1515 [mm] - Machine weight : 1000 [kg] Dsbjwgfdneu Ur S Ssut EQUIPMENT - CNC : Fanuc i Series - 3 colors status lamp - Rotating guide bush - Coolant tank - Ejection of workpiece - Parts catcher - Bar loader : FMB MICROMAG 20 - Electric transformer

Condition: used, Year of construction: 2007, turning diameter max. 366 mm turning length 705 mm control M 720 BM MAPPS 3 greates pass round over bed 923,8 mm Swing dia. over traverse guideway 755 mm standard turning dia. 275 mm max. spindle speed 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm max. bar capacity 80 mm chucking diameter 254 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 26 mm Drill shank diameter 50 mm Spindle speed - driven tool stations max. 6.000 min -1 turret change time 0,25 sec. x-axis 260 mm z-axis 795 mm tailstock 734 mm taper of center MT 3 diameter of quill 80 mm feed speeds max. 30.000 mm/min rapid traverse X/Z: 30 m/min rapid traverse C: 400 min/-1 total power requirement 43 kVA weight of the machine ca. 5,9 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NL 2500 MC / 700 - Tool-Drive Debuevh Hx Dj Ur S Sjut - C-Axis - Tailstock

Condition: good (used), Year of construction: 1973, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 860 mm, Oerlikon milling machine, rarely used, only used for punching tool repairs. Very precise. Dusbswgk Ixeu Ur S Sjt With CNC control. Can be used for workpiece weights up to 3000kg.

Year of construction: 2010, Condition: ready for operation (used), Main Drive Spindle motor power 18000 W Dusbu Ur Sswct A Ds Sot Number of axis 3 Movement X-Axis Movement 3050 mm Y-Axis Movement 1360 mm Z-Axis Movement 150 mm Tools Type of tool holder HSK F63 Additional Equipment Dual Form Lifting Station // Dual Pickup Station For Large Diameter Tools (Up To 270 mm) 6 Workpiece Supports (Length 1320 mm) X Axis Area Limitation With 2 Pneumatic Cylinders (Left/Right) 12 Fast-Positioning Vacuum Pods (140 x 115 x 100 mm) 8 Narrow Vacuum Cups (125 x 115 x 100 mm) 10 Stop Cylinders For Workpiece Positioning Laser Positioning System Mobile Control Panel Vacuum Pump Three-Part Safety Mat For Pendulum Operation This 3-axis FORMAT4 Profit H22 was manufactured in 2010. A CNC Wood Machining Centre designed for versatile woodworking applications. Consider the opportunity to buy this FORMAT4 Profit H22 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 0-250-16-2550, Workpiece dimensions: Length: 200 – 3050 mm Width: 70 – 850 mm Thickness: 12 – 60 mm Workpiece weight: 30 kg Drilling spindle V13 HIGH SPEED: Drilling depth : max. 38 mm Rotation:right/left Spindle spread: 32mm Total drill length: 70mm Rotation speed: 1500-7500 rpm Motor: 2,3kW Duebu Urori Rdgo S Sst Grooving saw: 100mm

Condition: new, Breton Matrix E1 is the 5-axis monobloc high speed vertical gantry milling centre for machining workpieces in steel, lightweight alloy or special composites Debu Ujivacger S Sout

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 SALE DIRECTLY BY CUSTOMER: Machine location: 88436 Oberessendorf SALE DIRECTLY BY CUSTOMER: Machine location: 88436 Oberessendorf MACHINE NUMBER 393.830 Basic machine completely in standard version: For detailed technical data see data sheet for PROTEC type 571 Duebu Ur Sev E Sz Ej Set Processing unit with PowerBlock with 21 spindles and 1 grooving saw (BK1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Milling unit Profit HSK63F with 3-way magazine for automatic tool change, Motor 5.5 kW (S1), 1000-20000 rpm with frequency converter, right and left rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1,000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in throughfeed mode, max. 5,600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Air connection: 7 bar + Foldable roller table, inlet + Foldable roller table, outlet + Auxiliary stop 600 mm with integrated rollers + DXF import postprocessor for programming system + ASCII import postprocessor for 3D generator e.g. Truncad + HSK and milling cutter set + HSK assembly set + HSK cleaning set + counter pressure device for above + suction distributor D. 160 mm 80/80/80

Condition: ready for operation (used), Year of construction: 1997, turning diameter ? mm Djbu Uewa Upger S Ssut turning length 500 mm control Mazatrol T Plus weight of the machine ca. 6 t dimensions of the machine ca. 8 * 2,5 * 2,5 m

Condition: good (used), Year of construction: 1987, Available immediately from location. CNC control: Heidenhain TNC 155 X travel: 600 mm Y travel: 200 mm Z travel: 150 mm Max. workpiece weight: 300 kg Table clamping area: 800 x 300 mm Table height: 800 mm Spindle speeds: continuously variable 40-2000 rpm Drive power: 4 kW Infinitely variable feed rates in all directions Dimensions (L x W x H): 2200 x 2700 x 2400 mm Approx. weight: 2000 kg Djbu Urjwazwkj S Sjut

Year of construction: 2009, Condition: ready for operation (used), Main Drive Spindle speed range 6000–18000 rpm Number of axis 3 Additional Equipment Roller infeed table Upper pressure table Lower pressure table Upper and lower working units Belt outfeed conveyor (right side) Electronic thickness control Automatic central lubrication CNC control system: XP 600 with Soft CN Safety system Dusbu Urowct A Rs S Sjt This 3-axis BIESSE SKIPPER 100 CNC processing centre was manufactured in 2009. Ideal for versatile CNC machining, it offers robust construction and precision. Consider the opportunity to buy this BIESSE SKIPPER 100 CNC processing centre. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), Year of construction: 2015, operating hours: 1,770 h, Functionality: fully functional, Kunzmann WF 600 MC milling machine (2015) Manufacturer: Kunzmann Type: Kunzmann WF 600 MC milling machine Year of manufacture: 2015 Condition: very good, little used Spindle hours: 1770h Availability: Immediately from stock 77948 Friesenheim Control HEIDENHAIN TNC 620 X-travel 610 mm Y-travel 400 mm Z-travel 450 mm Main drive (100%/25% ED) 6.8/13.0 kW Speed range 1-5,000 rpm Tool holder SK 40 DIN ISO 7388-1 Feed range up to 5 m/min Weight approx. 2,000 kg Djbowbqt Dou Ur S Sjut Angle table, rigid Clamping surface 800 x 425 mm T-slots 6 x 14 H 7 Table load max. 300 kg Coolant system Machine light Horizontal milling spindle with gear Scope of delivery: – El. handwheel HR 410 FS – 3D probe TS 220 – Documentation – Machine vice – 52 tool holders

Year of construction: 2025, Condition: used, machine/vehicle number: 71456210, Coordinate measuring machine, manufacturer: MITUTOYO, type: CRYSTA-APEX V544 CNC, year of manufacture: 2021, serial no.: 71456210, with accessories consisting of measuring probes, etc. Dsbewbuh Eou Ur S Sout

Condition: ready for operation (used), Year of construction: 2004, Messabmessungen X/Y/Z: 700mm/1000mm/600mm, Genauigkeit: +/-1,7 + 0,3L/100µm, max. Werkstückgewicht: 1000kg, max. Werkstückhöhe: 800mm, max. Verfahrgeschwindigkeit: 520mm/s, Maschinengewicht: ca. 1950kg. Dokumentation vorhanden. Besichtigung vor Ort ist möglich. Djbu Urewf Nx Ho S Ssut

Condition: good (used), In good technical condition and fully functional. FANUC control system Spindle speed range: 8 – 3150 rpm Dobewcxbleu Ur S Sout Spindle motor power: 30/35 kW X-axis 1800 mm Y-axis 1500 mm Z-axis 1200 mm Machine dimensions: length x width x height 12000 mm × 9200 mm × 5500 mm Machine weight approx. 45,000 kg.

Condition: used, Year of construction: 1988, Functionality: unexamined, machine/vehicle number: 00374030, turning length: 2,000 mm, turning diameter over cross slide: 770 mm, turning diameter: 770 mm, spindle speed (max.): 1,800 rpm, tool mount: 40 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, total height: 2,125 mm, total length: 5,690 mm, chuck outer diameter: 250 mm, total width: 2,900 mm, overall weight: 8,500 kg, Equipment: rotational speed infinitely variable, The Heyligenstaedt 24 U / 2000 CNC lathe, built in 1988, is in very good and well-maintained condition, but was last used in production in 2023. The machine is equipped with extensive accessories (see photos) and can be inspected at the production site AQUAtec Machining AG Industriepark, 6460 Altdorf, Switzerland, upon request. Duobu Urewfqvme S Sst

Year of construction: 1999, Condition: ready for operation (used), Main Drive Number of axis 5 Additional Equipment Energy Chains: Various models This 5-axis MAKA FPM 470 CNC Wood Machining Centre was manufactured in 1999. Ideal for complex woodworking projects, it offers precision and versatility. If you are looking to get high-quality milling capabilities, consider the MAKA FPM 470 machine we have for sale. Contact us for more information about this machine. Application Types Duebuewblcaj Ur S Sjt CNC Wood Machining

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, Functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine Duobu Urewbqixs S Sjt High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Infinitely variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm height 1890 mm Weight:1060 kg Scope of delivery: - Original documentation - 4x saw blades

Condition: good (used), Year of construction: 1983, turning diameter 340 mm turning length 290 mm centre height 160 mm control Sinumerik 810T spindle bore 53 mm turning speed range 60 - 4000 U/min quill stroke 120 mm diameter of quill 60 mm tailstock quill taper MT 4 tool change unit 8 fach total power requirement 13 kW weight of the machine ca. 2200 kg dimensions of the machine ca. 2,4 x 2,0 x 1,9 mm Duebu Urowbi Iyo S Sjt CNC lathe - cycle controlled

Condition: excellent (used), Year of construction: 2018, I sell the multiple drilling machine with inserting Vitap Blitz Year: 2018 Number of drilling spindles 1 Number of inserting heads 1 Glue spraying with pump Programming CNC-driven X-axis Very good condition. Dusbuowg Tyqe Ur S Sst Available immediately

Year of construction: 2003, Condition: ready for operation (used), General Data Measurements width 4800 mm Measurements depth 7700 mm Measurements height 2960 mm Machine weight 13805 kg Control Unit Brand SIEMENS Model 840D Powerline Main Drive Spindle speed range 637 to 1675 min⁻¹ Spindle motor power 19 kW Movement X-Axis Movement 2000 Y-Axis Movement 630 Injection Unit Screw diameter 60 mm Media Internal cooling Yes Additional Equipment Equipped with an electrical quill travel of 80 mm (overhauled) Grinding Spindle: Overhauled Grinding Wheel Handling: Broad grinding wheel support, manual steadies, wheel-changing facility with a grinding wheel stand Resy coolant management system Automatic and manual steadies included The machine has been mechanically overhauled The bed and grinding spindle are in refurbished condition General Data Measurements width 4800 mm Measurements depth 7700 mm Measurements height 2960 mm Machine weight 13805 kg Control Unit Brand SIEMENS Model 840D Powerline Main Drive Spindle speed range 637 to 1675 min⁻¹ Spindle motor power 19 kW Movement X-Axis Movement 2000 Y-Axis Movement 630 Injection Unit Screw diameter 60 mm Media Internal cooling Yes Debu Urewbla So S Seut Additional Equipment Equipped with an electrical quill travel of 80 mm (overhauled) Grinding Spindle: Overhauled Grinding Wheel Handling: Broad grinding wheel support, manual steadies, wheel-changing facility with a grinding wheel stand Resy coolant management system Automatic and manual steadies included The machine has been mechanically overhauled The bed and grinding spindle are in refurbished condition This 4-axis Cetos BUC 63C CNC/2000 was manufactured in 2003. A robust cylindrical grinding machine, it features a center distance of 2000 mm, a swing diameter of 630 mm, and can handle a maximum workpiece weight of 4000 kg. Equipped with the advanced Sinumerik 840D Powerline control system and a Resy coolant management system, it ensures precision and efficiency. If you are looking to get high-quality internal cylindrical grinding capabilities consider the Cetos BUC 63C CNC/2000 machine we have for sale. Contact us for more information. Application Types Grinding

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Control Kelco 80 total power requirement kW weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m Dujbu Urju D I Tle S Sst