Used Gesan Dps 65 for sale (22,053)

Condition: used, fuel type: electric, Forklift battery charger, industrial charger, forklift battery charger, industrial charger -Power: 24 volts -Power: 65 A -Connection: 230 volts -Dimensions: 480/450/H785 mm Croled A D Uksq Elywsb -Weight: 70 kg

Condition: new, cutting range for steel to 35.0 TS mm cutting range for steel to 25.0 QS mm ampere 20 - 65 Ampere cutting medium Druckluft voltage 400 V output Eingang 7.8 KW weight 51.5 kg range L-W-H 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The air plasma cutting system Avalon 65 AIR with integrated Compressor is your reliable partner for the demanding Mission. Make separation cuts up to one with the Avalon 65 Air Material thickness of 18 mm. Characteristics : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic Colsixm N Rjq Elywerb . Arc properties - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch to activate airflow around test air pressure . without having to trigger the burner - Intelligent protection function protects the plasma torch . from damage such as incorrect air pressure, missing wearing parts, . Pilot arc overload. * max. cutting thickness carbon steel =35 mm * optimal cutting thickness carbon steel =25 mm * Stainless steel =25 mm * Aluminum =20mm * Copper =14 mm Special equipment included: - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 501628, spindle speed (max.): 4,500 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 280 mm, bar diameter: 65 mm, spindle diameter: 79 mm, Machine package: 2 machines = 1 x functioning machine + 1x spare parts carrier TECHNICAL DETAILS Bar diameter (normal): 65 mm Main spindle Spindle head (flat flange): 140h5 mm Spindle bore diameter: 79 mm Clamping tube diameter: 68 mm Bearing diameter (front bearing): 120 mm Main drive Maximum drive power (40%/100% ED): 28 / 21 kW Speed range: 25 - 4,500 rpm Maximum torque (40%/100% ED): 320 / 240 Nm Path speed for thread cutting (max.): 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Slide 1 Face path/longitudinal path: 155 / 280 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Threaded spindle pitch (X Ø X): 15 x 25 mm Threaded spindle pitch (X Ø Z): 15 x 32 mm Slide 2 Face path/longitudinal path: 82 / 120 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Threaded spindle pitch (X Ø X/Z): 15 x 25 mm Tool carrier Number of tools: 8 Tool holder: Shaft Ø according to DIN 69880 Number of driven tool stations: 4 Power max. (40%/100% ED): 7.6 / 4.6 kW Max. torque (40%/100% ED): 24 / 14.7 Nm Max. speed (tool holder 1 and 2): 4,000 rpm Counter spindle Clamping diameter (with collet): 42 mm Clamping diameter (with 3-jaw chuck): 65 mm Spindle head diameter (flat flange): 120 mm Positioning device: stepless pitch MACHINE DETAILS Total length (with chip conveyor): 3,500 mm Total height (with control cabinet): 1,625 mm Total width (with control cabinet): 1,750 mm Weight of the machine including control cabinet: 5,000 kg Weight of the integrated bar loading magazine: 900 kg Crjlq Esvviwxjlywjb Hydraulics Contents: 9.8 l Pump power: 1.1 kW Coolant system Contents: 160 l Pump power: 1.65 kW Discharge rate at 8 bar: 25 l

Condition: used, control 840 C Cslq Elyjqn A Rnoworb control 2x 840 D Kühlmittelsystem chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW

Condition: good (used), Year of construction: 1995, Traub, TNC 42/65 DGY, year 1995 Model TX8F turning length 450 mm Main drive Spindle speed range 4000 Spindle motor power 18.5 KW Colsrgq Ezeq Elywjrb Weight 4,725 kg General overhaul in 2015 Accessories: chip conveyor, bar loader LNS Quick Load

Condition: ready for operation (used), Technical characteristics Double loading Crjlq Eeundguolywjb Advance by pneumatical tightening 2 motors Double blade : 250 and 175 mm Tables Power and Motors Voltage: 380 V Pluging: Three-phased Power: 3,5 Kw Overall dimensions

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 Crslq Elyec Nvyaewob -Diameter shaft: 30 mm -Protection class: IP 44 -Brake -Dimensions: 565/250/H250 mm -Weight: 33 kg

Year of construction: 2020, Condition: new, Semi-automatic carton former - Starbox 65 Colq Elyof Evh Towerb - Connecting Robotape-Starbox 65 - Set of 4 swivel castors with brake Sample photos - machine is still in original packaging

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, measuring range X-axis: 650 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 500 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Measuring range: 650 x 1,000 x 500 mm Limit of length measurement uncertainty: E₀ = 2.8 + L/250 µm Condition: newly painted, desk shape with new worktop and current color design Crolq Elyevupvloweb Control and operating elements CNC control: WPC Controller table: 1 piece Hand control panel: HT 400 Touch system: Renishaw PH10 Probe: switching probe Renishaw TP 20 Reference sphere: 1 piece Software and PC system Software: WM | QUARTIS GEO for regular geometry applications (as of 2022-1) CAD interface: WM I QUARTIS STEP import interface (as of 2022-1) Software dongle: 1 x Metrokey PC system: WIN 10 Monitor: 24 ’’ TFT

Condition: used, Year of construction: 1991, turning diameter max. 650 mm turning length max. 790 mm control MORIC T5F turning diameter over bed 890 mm turning diameter over cross slideways 560 mm centre distance 900 mm Main spindle: turning speed range - main spindle 4 - 1.010 min/-1 power capacity - main spindel 37 / 30 kW max. Torque 3.870 Nm Number of speed ranges 2 spindle bearing diameter 240 mm spindle bore 168 mm max. bar capacity 144 mm usable bar diameter 120 mm spindle head JIS A2 -11 chucking diameter 610 mm turret: number of toolpositions 12 pos. Shank height for square tool 32 mm Drill shank diameter max. 65 mm axis stroke: x-axis 350 (25 + 325) mm z-axis 860 mm Tailstock: tailstock 680 mm diameter of quill 110 mm quill stroke 100 mm taper of center MK 4 feeds: rapid traverse X: 5 / Z: 8 m/min Tipp feed 0 - 1.260 mm/min total power requirement 69 kVA weight of the machine ca. 9,2 t dimensions of the machine ca. 6,0 x 3,0 x 2,6 m CNC - Lathe MORI SEIKI - SL 65 B Crslsuk N Hrsq Elyweb

Condition: used, Max. punching force: 650 kN For further performance data, see the rating plate or on request. Including assortment of punches and dies Celqef Nwqlj Elywsrb

Condition: new, SAHINLER HKM 65 hydraulic punch-cutter Exerted power : Ton 65. Engine power : Kw 5.5 Dimensions (mm) : mm 1.700 x 900 x 1.670 ( L x W x H ). Weight: 1.600 Kg: Crelq Elysggbuhewjb 1.600 Kg PUNCHING : Punching capacity : mm Ø 2 x Thickness 20 mm. Recess depth: mm 305. Punching stroke : mm 55. Working height : mm 1.030. SHEARING : Plates : mm 300 x 20. mm 375 x 15. Length of blades : mm 380. Round bars : mm Ø 45. Square bars : mm 45. 90° corner profiles : 120 x 120 x 12 mm. 45° corner profiles: mm 70 x 70 x 10 SKIRTING : Max thickness : mm 10. Width : mm 45. Depth : mm 90. Working height : mm 900.

Condition: used, Bezel, stick, lynette Colq Elyeb A Td Rswerb -Max. Passage: Ø 65 mm -Tip height: 83 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 250/280/H65 mm -Weight: 6 kg

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Cslq Eljuiq Dheywjrb Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Travel distance X-axis approx. 400 mm Travel distance Z-axis approx. 400 mm Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm magnification 20x and two circular screens - Fixed focusing screen with crosshairs Crslq Elshbal Dsywjb - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition

Condition: used, Year of construction: 2008, turning diameter 310 mm turning length 600 mm control Sinumerik 810 D PL Siemens turning diameter over bed 425 mm Main spindle turning speed range - main spindle 500 - 4.500 min/-1 max. Torque 280 Nm power capacity - main spindel 16,5 kW C-Axis 360 ° Spindle diameter 100 mm chucking diameter 210-52 mm spindle bearing diameter 120 mm clamping cylinder 65 mm Bar feed max. 65 / (52) mm spindle nose A8 DIN 55026 axis stroke: Crolq Eljtqmqhoyweb x-axis 230 mm z-axis 740 mm rapid traverse X-axis 15 m/min rapid traverse Z-axis 24 m/min turret: tool positions turret 12 pos. driven statition 12 pos. tool taper VDI 30 DIN 69880 Spindle speed driven tools 6.000 min -1 power capacity - driven tools 3,7 kW max. Torque 9,5 Nm tail stock dia. of quill MK 4 80 mm quill stroke 120 mm tailstock adjustment 475 mm tension force 500 daN total power requirement - kW weight of the machine ca. 4,2 t dimensions of the machine ca. 3,7 x 2,2 x 1,8 m CNC - Turning- and Milling Center SPINNER - TC 65 MC - Turret completely overhauld

Year of construction: 2022, Condition: new, machine/vehicle number: AN2301154, Stationary power generator - immediately available from stock Our standby power generator is an important part of your company's power grid. It is always ready for use and can step in immediately in the event of a power interruption. Electrical data: Rated voltage and frequency: 400 V / 50 Hz Supply power (PRP): 60 kVA / 48 kW Fuel consumption: Tank capacity: 100 liters Fuel autonomy at 75% load: 8h Noise level: Sound pressure level (LPA) at 7m: 68 dB(A) Dimensions and weight: Length x width x height: 2165 x 900 x 1428.5 mm Weight: 1210 kg Colqol R Hv Ao Elywsrb Immediately available pre-configured with the following optional equipment: Coolant preheating Automatic control panel with Battl. 3 way fuel valve for operation from external tank Optional junction box for emergency power operation is also available.

Condition: used, Grindstone, grinding pencil -Take: M12 -Outer diameter: 65 mm -Length: 67 mm -Radius: 30 mm Crolq Elob A Hiueywob -Sale: only complete -Weight: 38 kg

Condition: used, plug -Type: SACC-M12FR-5CON-PG9-M -Number: 65x available -Price: complete -Weight: 4.5 kg Cjlq Elysb A Rpbeworb

Condition: used, Gear motor electric motor Electric gear motor -Speed: 165 rpm Colq Elyod Hfyuewerb -Power: 0.33 kW -Construction: B5 angle -Diameter shaft: 15 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 360/180/H190 mm -Weight: 11 kg

Condition: used, Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 505 mm Celq Esd Sqylslyworb -Width: 65 mm -Interior diameter: 51 mm -Weight: 32 kg

Condition: used, Gear motor, electric motor -Speed: 32/65 rpm -Power: 0.2/0.4 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Price: per piece -Number: 5x available -Dimensions: 560/250/H220 mm Cslq Elyscpg Hnjwerb -Weight: 32 kg

Condition: used, Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels Colq Elyjd Sqykewerb -Outer diameter: 505 mm -Width: 65 mm -Inside diameter: 127 mm -ENR.625 EK-30/3-M-KE -Price: per piece -Number: 3 pieces -Weight: 27 kg

Condition: used, Gear motor, electric motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 Crslq Ejc Uv Nielywjb -Number: 1x geared motors available -Price: per piece -Weight: 31 kg

Condition: used, Processing unit, automatic drilling machine, drilling machine, floor drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 1.1 kW -Speed: l 2665 rpm -Thread recording Coljb A Tcpjq Elywsrb -Adjustable drilling distance: 15-65 mm -Number: 2x processing units available -Price: per piece -Weight: 23 kg/piece