Used Knikmops Km130 Te for sale (135,692)

Condition: good (used), power: 132 kW (179.47 HP), gearing type: automatic, fuel type: diesel, color: yellow, Year of construction: 2016, operating hours: 10,410 h, Equipment: air conditioning, General information Field of application: Construction Serial number: CAT00D6NTMG500485 Technical information Colrcjv Rvf Sordysgt Track width: 86 cm Empty weight: 19.393 kg Drivetrain AdBlue system: Yes Drive: Track Make of engine: C7.1 Condition Technical condition: good Visual appearance: good Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 0,0062x0,00385x0,0033 Production country: FR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: ready for operation (used), Bathless Dissolution Test System with 6 Vessels. The DISTEK Evolution 6100 Bathless Dissolution Test System is a revolutionary piece of equipment that eliminates water bath issues with its patented bathless technology. It is designed to meet today's demanding standards for accurate temperature control and test reporting, maintaining much tighter tolerances for temperature and RPM than conventional water bath systems. The unit has been tested and comes with a 30-day warranty, with slight cosmetic blemishes from normal use. With six complete sets of vessels, lids, shafts, paddles, and heating jackets, the Evolution 6100 offers enhanced precision and functionality. It offers rapid media heating, precise individual vessel temperature control, and advanced method storage and sorting capabilities. Key Features Patented bathless technology for accurate temperature control 6 complete sets of vessels, lids, shafts, paddles, and heating jackets Rapid media heating and precise individual vessel temperature control Advanced method storage and sorting capabilities Specifications Dissolution Vessels: Six Standard/Up to Seven Vessels Volume: 500mL - 1000mL programmable Vessel Heating Rate: Approx. 1.5C per minute RPM Control Range: 25-300 RPM, digitally controlled, closed loop Resolution: 0.1 RPM Accuracy: 0.2 RPM Display: LED's, .75 (19mm) high Motor: High Torque, Permanent Magnet Vessel Temperature Control: Independently controlled two-zone heater jackets Display Resolution: 0.01 C Accuracy: 0.25 C Interface Ports: RS-232 (2), RS-485 (1), Parallel Printer (1) Construction Materials: Cast Aluminum, Stainless Steel, Acid resistant solid state heating elements, Engineered Plastics Electrical Power: 115V 15V 50/60Hz 15A or 230V 15V 50/60Hz 9A Weight Celswg Rrwjrcrdysgt Metric: 86.1826 kg Imperial: 190 lb Dimensions Metric: 27.94 cm x 53.34 cm x 116.84 cm Imperial: 11 in x 21 in x 46 in Harmonized Code 841989

Condition: used, Year of construction: 2023, operating hours: 1,117 h, 2023 | Caterpillar | Caterpillar M318 with variable angle boom with Oilquick OQ80 quickcoupler (without attachment) | Used Wheeled Excavator | 1117 hours 📍Location: Germany, Sindelfingen 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 199000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 53 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good machine in working condition with small jobs to do. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37866 Equippo" 💡 Why Buy from Us? Cgjlrcjwfaabordyjt ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand BOSCH Model OSA3 Main Drive Number of axis 4 Movement X-Axis Movement 2000 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Tools Number of index 48 Type of tool holder HSK63 Media Chip conveyor Yes Cslrcrdowd Ux Noyjgt This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 1990, Cutting height: 305/270 mm throat: 405 mm Drive type: el./mech. drive: 0,75/1,1 kW Remark: Butt welding device, infinitely variable band speed, Cgolsg Sm Igjrcrdyot swivelling saw table 500 x 500 mm weight: 450 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,560 h, Shredding plant for domestic and commercial waste, hydraulic drive, HÄGGLUNDS pump unit, SIEMENS electric motor 132 kW, Cslrcrdov Hr Nxsysgt cutting chamber approx. 2800 x 1300 mm, shaft length: approx. 2400 mm, inlet funnel 4000 mm x 2500 mm, subframe divided for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm, viewing and test run possible by appointment

Condition: good (used), power: 121 kW (164.51 HP), fuel type: diesel, color: yellow, Year of construction: 2018, Equipment: air conditioning, General information Field of application: Construction Serial number: CAT00320LHEX01156 Technical information Track width: 60 cm AdBlue system: Yes Make of engine: C4.4 Empty weight: 22.100 kg Condition Technical condition: good Visual appearance: good Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,5x3x3,2 Production country: JP Cgslrewbcumscrdyot Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: new, - Capacity 2070 x 7 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) Cgolren Ryfwscrdyst - Digital display for rear roller movement - Digital display of the bottom roller movement (material clamping) - Hardened rollers - Conical rollers - Swiveling top roller - Brake motor - Emergency stop - Documentation - 400V

Condition: used, overall weight: 11,200 kg, empty load weight: 2,500 kg, maximum load weight: 8,700 kg, axle configuration: 2 axles, first registration: 11/2009, suspension: other, tire size: 235/75R17,5 143J, color: other, gearing type: other, front tire size: 235/75R17,5 143J, rear tire size: 235/75R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, Pull-out drawbar, 12 x stanchions, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Cgjlrjwfd Rqocrdyst

Condition: used, profile grinding machine brand: PETEWE type: PFS 3 C Colron Sk Umecrdyjgt

Condition: good (used), Cutting range: Ø 55 mm, blade Ø: 200 mm Drive type: el./mech. Celehtzcaorcrdyegt drive: 0,75 kW, 400 V Remark: portable weight: 50 kg

Condition: used, machine/vehicle number: 006602, Position 1: Front-Loading Panel Saws BARGSTEDT + HOLZMA-HPP 380/43/43 Cgjlrcrdjrtup Rsyet Position 2: Automated Warehouse BARGSTEDT + HOLZMA-HPP 380/43/43

Condition: used, power: 200 kW (271.92 HP), fuel type: diesel, color: yellow, Year of construction: 2007, operating hours: 10,100 h, Equipment: air conditioning, General information Field of application: Construction Colrcrov Iuzgodyogt Serial number: CAT0330DATHJ00297 Technical information Track width: 75 cm Empty weight: 47.870 kg Make of engine: C9DI Other information Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 15,105x3,36x3,36 Production country: BE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information Comes with GP short boom on container-chassis (Pics added) Dimensions GP Boom with Chassis: 9000mm x 2400mm x 2800mm total weight: 8tons 21M Demolition Boom on excavator

Condition: used, Year of construction: 2017, Working dimension X: 5.400 mm Working dimension Y: 1.900 mm Working dimension Z: 350 mm Independent Z-axes: 2 Cslrcjwfrbdjrdyjgt Number of milling spindles: 1 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 24 Disc tool changer: Yes Pickup change place: Yes Vertical drilling spindles: 22 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Stop for top layer protrusion: Yes Workpiece support aids: Yes Two rows of stops: Yes Number of consoles: 8 Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 200 m³/h Special workpiece clamping system: Clamps for beams Safety device: Bumper Chip conveyor: Yes Interface for .dxf data: Yes Remote control: Yes Control: PC control Software: MASTERWOOD MASTER 3D, MASTERWOOD MASTERWORK, MASTERWOOD MASTER AT Conformity marking: CE mark Total connection: 54 kW Weight: 6.500 kg Space requirement Length: 9,03 m Space requirement Width: 5,55 m Space requirement Height: 3,16 m

Condition: used, Year of construction: 2013, operating hours: 8,237 h, Field of application: Construction Serial number: T783xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18853 Celrcjvgy Hfsrdysgt Specifications: - 2013 model. - 25416 km. - 8237 hours. - Central grease. - 783 kw. - 360 degree camera. - Exhaust in box. - Net weight: 68260 kg. - Loading capacity: 41.6 m3. Description: Terex TR 100 for sale. Owner has 2 identical ones to be sold, only approx. 1000 working hours difference on them. Incredibly efficient machine for mass transfer. Good with steel left in the box. Works as it should. Ready for delivery. HK: 1064 Hours: 8237 Own weight: 68820 Kw: 783

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 8 h, Machine in pre production *planned to be ready appr. end of may 2025 Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers Celrcrjxfwdjdysgt + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Year of construction: 1985, Machine number 52565, Cutting range: max. Ø 130 mm, Leaf Ø: 400 mm, Type of drive: el./mech., Drive: 3.0 kW / 400 V, Cslrjf Ar T Recrdyogt Comment: with mobile base, Weight: 200 kg

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, 1 x Newtech RoboSONIC-Inline XL automatic ultrasonic cutter supplied with ABAC Genesis air compressor. The RoboSONIC-Inline XL is a highly flexible, in-line robotic machine incorporating ultrasonic cutting technology. Previously used to cut trays of marshmallow, this machine is designed to be used to cut the entire length of tray bake, round and loaf type products, ideal for customers with high throughput requirements. As a conveyor-based machine, it can be integrated into an existing line or used as a stand-alone solution. Colrcreu I U Htodyegt Fitted with ABB 6-axis robot and 400mm wide blade providing flexiblity, reliability and accuracy. Also has an integrated cleaning tank with air-dry function. Operated via full colour touch screen with user friendly interface and easy-to-edit programs. Model - R/UCM-COMP-I. Electric supply - 230 V / 50 hz / 1 phase. Power - 13 Amps. Air supply - 6 Bar. Requires mains water supply for the cleaning tank. Overall dimensions - 3630mm long x 1360mm wide x 2170mm high. Belt dimensions - 3630mm long x 615mm wide. This unit has been lightly used, generally being operated for only 2 hours per month since purchase and has been serviced / maintained by the manufacturer, the last service being in July 2024. Air compressor on wheels: Manufacturer - ABAC Aria Compressa S.p.a. Model - GE 7.5. Working pressure - 8 Bar. Voltage and frequency - 400 V / 50 hz / 3 phase. Installed power - 5.5 kW. VIDEOS AVAILABLE ON REQUEST

Condition: good (used), power: 132 kW (179.47 HP), gearing type: automatic, fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 8,664 h, Equipment: air conditioning, General information Field of application: Construction Serial number: CAT00D6NCMG501321 Technical information Track width: 84 cm Drive: Track Make of engine: C7.1 Empty weight: 19.393 kg Functional Working width: 385 cm Condition Technical condition: good Visual appearance: good Other information Tyre brand: caterpillar Delivery terms: EXW Cslev Rvfxercrdyogt Transport dimensions (LxWxH): 6,2x3,85x3,3 Production country: FR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Year of construction: 2011, operating hours: 4,918 h, fuel type: diesel, General information Field of application: Construction Serial number: AD123549 Weights Empty weight: 15.950 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.560 cm Other information Front tyres / undercarriage remaining: 60 Cslrsv H Nb Sscrdysgt Rear tyres remaining : 60 Tyre brand: Wide Wall Max. horizontal reach: 1620 m Transport dimensions (LxWxH): 9.5x2.38x2.67 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Serial number: 2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17970 Cjlrcrdsvg N Rgeyjgt Specifications: - Tellefdal K-3300 - Width: 329 cm - Hydraulic Angling - Parallelogram - Wear steel Description: Tellefsdal ploughshare for truck. Everything should work as it should. There is hydraulic tilting on this. Ready for delivery Width: 329

Condition: new, Year of construction: 2024, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Cgelrcsd Nm Sijrdyjt Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: new, Functionality: fully functional, Inline Screwdriver Station with Reaction Arm (Higher Torque) Cgslrcewduq Eerdyst This station is designed for medium to high torque fastening applications, using an inline electric screwdriver mounted on a reaction arm for enhanced precision and ergonomics. Controlled by a Desoutter CVI3 Vision Controller, it offers advanced tightening strategies, real-time data logging, and full integration with plant networks via Profinet. The screwdriver delivers accurate torque and angle feedback, suitable for applications up to approximately 12 Nm. A positioning reaction arm with encoded axes ensures proper tool alignment and absorbs reaction forces, improving operator comfort and process consistency.

Condition: good (used), power: 178 kW (242.01 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 5,810 h, Equipment: air conditioning, General information Field of application: Construction Serial number: CAT0330FEJFR00192 Cgelrcrov Iuyiodyst Technical information Track width: 60 cm AdBlue system: Yes Make of engine: C7.1 Empty weight: 30.390 kg Condition Technical condition: good Visual appearance: good Other information Dipper / stick length: 290 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 10,4x3x3,45 Production country: JP Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, color: white, lifting height: 32,400 mm, Year of construction: 2007, operating hours: 19,730 h, General information Field of application: Construction Serial number: 507116 Drivetrain Drive: Wheel Make of engine: Cummins Weights Empty weight: 40.500 kg Functional Mast length: 3.240 cm Length of jib: 8 m Lifting capacity: 60.000 kg Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Emission level: Stage II / Tier II Delivery terms: EXW Carrier engine: QSB6.7 Counterweight: 8.7 Transport dimensions (LxWxH): 129x295x36 Production country: IT Cgslrcrewbcu Tsdyet Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information