Used Knegt Wood Chipper Pto for sale (19,388)

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Djlqujkwhq Rjp Eijkl Suspended control panel with Siemens control and 10" large touch display Control of the saw blade height/inclination and positioning of the rip fence via the control panel Max. Cutting height 200mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ High dead weight ensures vibration-free operation Large outrigger table with material roller Extendable aluminum longitudinal fence with two folding fences and digital position indicator 7.5 kW main motor mounted on a robust cast iron frame Format sliding carriage with four bearings made of anodized aluminium with high torsional rigidity Multiple locking mechanism on the sliding table Table extension and table extension made of thick sheet metal as standard Large pendulum guard can be conveniently raised using a gas pressure spring Saw blade clamping via tool-free Rapid system Location: Hochheim Availability: at short notice

Year of construction: 2025, Condition: new, Vacuum lifters BARBARIC swiveling, including hoists, equipment package consisting of: -Vacuum lifters of uniWood B3-90 degrees - 250 comfort version, with integrated chain hoist increased load capacity: 250 kg Suitable for the vertical and horizontal transport of flat standard plates. Vacuum generation is pneumatically by means of ejector. For lifting of permeable materials (MDF of 8 mm thick), which is Reinforced Vakkumpumpe installed. -Technical data- Chain hoist lifting speed: 0-10 m / min stepless by frequency converter Lifting height (operating range): 2.0 m Length of chain: approx. 3.5 m operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: ca. 85 kg -Security system - the lift is equipped with a vacuum gauge. Release the load by means of 2 buttons -Hoists BARBARIC Load capacity 250 kg to the hoist Consisting of: Column, console and smooth-running boom. Delivery including Schiebefahrwerk and energy supply. Height: approx. 4, 2 m Bottom bracket: approx. 3.5 m Throat depth: 5 m Swivelling area approx. 250° Panning and cross travel by hand Base plate with 700 x 700 mm and mounting material. Supplied with adhesive anchors for concrete floor. This fixture requires a similarly proven concrete floor. Dkelqupjc Umftj Eiol The static verification of soil is on site to do and accordingly to document. Others

Condition: used, mileage: 815,833 km, power: 537 kW (730.12 HP), first registration: 09/2017, fuel type: diesel, color: other, axle configuration: 6x4, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, crane, sleeping cabin, spoiler, = Additional options and accessories = - Electrically adjustable door mirrors - Electrically operated windows - Electric mirrors - PTO - Radio CD player - Roof Spoiler Dkjlquewfgabep Eiel - Sleeper cabin = Remarks = Crane Number of support legs: 2 Rotator: ✓ Squeeze Box: ✓ = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Crane: HIAB, year of manufacture 2014, on rear of chassis Serial number: YSR6X40005465546

Condition: used, Year of construction: 2013, Functionality: fully functional, machine/vehicle number: SN 01/40312/0513, overall weight: 2,500 kg, total length: 2,750 mm, total width: 1,250 mm, total height: 950 mm, input voltage: 230 V, Fully automatic optical offline measuring stage Non-contact measurement and control of lengths, widths, angles, thicknesses, radii, hole diameters, drilling, coordinates and horizontal bores. Measuring range: Xmax. = 2.750 mm / Ymax. = 1.250 mm / Zmax. = 85 mm Measurement program creation with HECHT Interface: Import of DXF files (2D, true to scale, no cuts). Possibility import of machine files of a throughfeed drilling machine e.g. HOMAG, Biesse, Hüttenhölscher). Import from CAD/CAM software. Measurement result: Comparison of target/actual values taking into account tolerances with colored result display (OK / NOK). Clear error display in tabular form. Marking of the faulty positions in graphic display of the workpiece for easy fault localization. Accuracy (tolerance): 0,01 mm Dslqewgwqmeup Eiskl Connected load: min. 2 sockets 230 Volt AC

Condition: used, - no description available - Dkoljwbdu Isqup Eisl

Condition: used, Year of construction: 2022, Westtech Woodcracker CL320 felling grapple / in stock & immediately available / Year of manufacture: 2022 / DEMO / like new Price: €8,890.00 net / €10,579.10 gross Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 320 Grapple opening = shear opening (mm): 1,060 Terrain weight (basic / fully equipped) (kg): 620 / 1,170 Recommended flow rate main circuit (l/min.): 70 / 150 Recommended operating pressure main circuit (bar): 280 Recommended flow rate secondary circuit (l/min.): 45-60 Recommended operating pressure secondary circuit (bar): 200 Operating weight of carrier vehicle (t): 12 / 20 We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. We have a very large selection of different Westtech products in our warehouse, all available immediately! Mr. Herden (Tel.) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are also one of the largest commercial vehicle dealers in Germany with 800 used vehicles. We supply the complete Westtech Woodcracker range for you! Subject to errors and prior sale! Internal number: 121059 Dkolowfu Dbjqup Eiel

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Automatic frame press Working area 3550 x 2400/2600 mm pressure range 120 bar Pressure per 21000 N/kp Cylinder stroke vertical 250 mm, horizontal 20 or 80 mm Automatic control Electrical connection with medium pressure bar Special equipment: Impulse "Open press" Vertical positioning device Width compensation allowance for 1 MB 1 additional horizontal pressure cylinder Spring weight compensation Work safety device pull rope Installation dimensions 5150 x 1500 x 3340 mm Weight 2500 kg Electrical connection 3.5 kW Compressed air connection R 3/8" max 8 bar Availability: short term Location: Röllbach Dkjlquskwg Tmjp Eijl

Condition: new, Year of construction: 2024, Binks Raptor Lite Air Combi Sprayer Set Binks Raptor Lite on tripod combines the NEW Binks MX 4/32 stainless steel pump with the NEW Binks AirCombi spray gun AA440C. This guarantees pulsation-free paint supply and perfect surface quality. Raptor Lite is the affordable and robust all-in-one solution for a wide range of craft and industrial applications. Typical applications: - Furniture and wood industry - Aerospace - off road - Metalworking - Truck trailer and semitrailer manufacturers - And many others.... Suitable for the following materials: - Wood stains, lacquers and varnishes - Primers, sealants and undercoats - solvent- or water-based varnishes - polyurethane - And many others.... 32:1 AirCombi spray package - 5 year pump warranty - Patented solenoid switching for fast pulsation-free stroke changes - All material leading parts made of stainless steel - AirCombi spray gun with latest atomization technology - Modular design for reduced maintenance and downtime - Fixed, spring-loaded packings - Large sight glass for release agent Dslsbu Dziequp Eiokl - Manufactured according to ISO 9001, CE and ATEX approved Raptor Lite Pump Specifications: - MX4/32 - 32:1 ratio. - Material flow max. 4l/min, - Working pressure max. 256 bar

Condition: excellent (used), Tool holder and turning tool holder Manufacturer: SANDVIK COROMANT VDI40-CAPTO C4- Set Holder: Ø 40 mm SET consisting of: No.: 1405 =2x VDI 40 steel holder holder C4 C4-RC2040-51030 Weight:= 4kg No.: 1404 =Holder for internal turning holder No.: 58760 =Cylindrical C4 holder diameter 50x90mm various steel holders: 9x internal boring holders 10x external turning holders 3x external grooving holders Type list Capto C4.... 1) C4_R166_4KF-12060 internal thread turning holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External turning holder right triangular plate: Dkolqjvtzpboup Eisl 4) C4-SDJCR-27050-11 External turning holder right triangular plate 5) C4-DSSNR-27042-12 External turning holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External turning holder right 1x with indexable plate, Torx screws 7) C4-SDUCR-13080-11 Boring bar coro Turn, internal turning holder square plate-Torx 8) C4-PCLNR-17090-12 Internal turning holder with clamp 9) C4-SVQBR 13090-16 Internal turning holder copy plate 10) 3 pieces C4- RF15.1230-G20-27050B & 27060B Parting holder sword _____ Turning tool holder, steel holder, turning tool, turning tool holder, tool holder, axial tool holder. -Various types: see photos, more pictures on request -only the complete package is sold Shipping costs on request Request more information

Condition: excellent (used), Functionality: fully functional, mileage: 89,000 km, power: 157 kW (213.46 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2021, fuel consumption (combined): 7.8 l/100km, CO2 emissions: 278 g/km, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking sensors, power assisted steering, rear view camera, seat heater, second-hand vehicle warranty, traction control, trailer coupling, Come and see it at our Iperauto headquarters in Bergamo, in via Cesare Correnti 33. OFFER LINKED TO FINANCING Dslqueugm Idep Eiokl PRICE WITHOUT FINANCING €42,900 + VAT READY FOR DELIVERY - N1 TRUCK SUPER ACCESSORIES Ford Ranger Raptor DOUBLE CAB, in the 2.0 diesel 213cv automatic transmission engine. It has: 4' multifunction central screen, mp3 radio, Bluetooth with steering wheel controls, on-board computer, ABS, ESP, leather multifunction steering wheel, climate control, OFFROAD PACK, electronic mirror adjustment, Start&Stop, electric windows, heated windscreen, front and rear sensors, rear camera, heated seats, 3 traction modes, 5 driving modes, light alloy wheels, electronic and folding mirror adjustment, central locking, navigator, Apple Car Play and Android Auto, roof bars, tow hook and more!!! What are you waiting for? Come and visit us, we are waiting for you in Bergamo! The price indicated is linked to Iperauto promotions and initiatives. In some cases, the technical equipment and options may differ, therefore it is advisable to consult our sales consultants to avoid inconsistencies in the contractual phase. For other proposals you can consult our website. Before visiting one of our locations to view a vehicle, please contact us to verify the actual location and availability.

Condition: used, mileage: 300,887 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,330 mm, first registration: 11/2020, loading space length: 4,250 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, fuel tank capacity: 100 l, emission class: euro6, color: white, suspension: steel, number of seats: 3, Year of construction: 2020, Equipment: air conditioning, cruise control, navigation system, spoiler, tail-lift, = Additional options and accessories = - Driver airbag - Electric mirrors - Electric windows - Panelled loading space - Passenger bench - Power side-view mirror - Radio Bluetooth - Remote central locking - Side door - Tailgate = Remarks = Tailgate Plateau length: 160 cm Structure Construction year: 2020 Material: Plywood = More information = General information Dolswdgv Tequp Eiokl Number of doors: 2 Registration number: VHL-83-L Serial number: VF6VG000163389555 Technical information Number of cylinders: 4 Engine capacity: 2.299 cc Transmission Transmission: 6 gears, Manual gearbox Axle configuration Suspension: leaf suspension Max. front axle load: 1850 kg Rear axle: Double wheels; Max. axle load: 2800 kg Measures length/height: L4H1 Width: 224 cm Weights Empty weight: 3.000 kg Carrying capacity: 500 kg GVW: 3.500 kg Functional Tail lift: HOLLANDIA DHLM, tail lift, 750 kg Make of bodywork: CITYBOX POLY-LIGHT Maintenance APK (MOT): tested until 11/2025

Condition: new, Year of construction: 2024, Planer: Working table dimensions 400 x 1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 400 x 20 x 3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 400 x 760 mm Feed speed 7 m / min Dkslqup Eeg S Nx Dsijl Working height 4 - 220 mm Bohring agregate: Working table dimensions 250 x 500 mm Longitudinal / transverse / vertical travel 205/95/90 mm Spindle (M18 * 1.5-S) 0-16mm General parameters: Three-phase motor power 4.0 - 3.0 HP - KW Weight 410 kg Machine has spiral roller Machine is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.

Condition: used, axle configuration: 3 axles, first registration: 10/2019, color: other, Year of construction: 2019, Empty weight: 6.670 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!  Dkjlqup Eov Ivgkoisl

Condition: good (used), Year of construction: 2005, Thin cut Lamella band saw, Dkslqujwf Rv Hjp Eiel 310mm wide Good condition 80mm bandsaw wide 18.5 kw motor

Condition: used, mileage: 555,500 km, power: 294 kW (399.73 HP), first registration: 05/2016, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 05/2025, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, Special equipment: 2 power take-offs NAS/10 without top flange and with bottom flange, car telephone antenna, trailer data display, exterior mirrors and wide-angle mirror electrically adjustable and heatable, wide-angle mirror with electric maneuvering aid, battery 225 Ah, curb mirror right electr. adjustable and heatable, digital axle load display for axles with air suspension, pressure sensor for air suspension bellows, ETA automatic fuse, driver's cab: with air suspension, driver's seat comfort, air suspension, heated and air-conditioned with lumbar support, flame start system, transmission 12-speed - type: ZF 12 AS, Tipmatic, fuel tank: combi tank aluminum - 580 ltr. Diesel + 60 liters urea solution (AdBlue), air baffle against dust turbulence, 2-cylinder 720 cc air compressor, heated air dryer, Eberspächer D4S auxiliary air heater, battery emergency switch, retarder, stationary air conditioning system, 12V and 24V cab socket, fleet management system control module, door extension for cab, additional high beam/fog lights with cornering light Delqjr Iv Dbeup Eijkl Further equipment: Axle configuration: 4x2, ambient lighting, collision/front mirror, trailer socket 24V / 7-pin, trailer socket ABS, traction control system (ASR), audio system: MAN Media Truck Advanced 12V radio with navigation system preparation, MAN-Tronic on-board computer, rear axle differential lock, MAN-Brakematic electronic braking system, EURO 6 engine, cab: with Nordic insulation, cab: XLX, suspension: leaf / air, electric windows, remote central locking, tinted windscreen, generator 28 V 80 A, mechanical lifting roof, body/structure: tractor unit, rocker arm - brake EVB, automatic air conditioning, heated fuel filter, steering wheel with multifunction, raised air intake, engine 12.4 ltr. - 294 kW diesel, engine compartment encapsulation, wheelbase 3600 mm, side spare wheel lift, fifth wheel coupling: Jost JSK 37 C, rear axle disc brakes, front axle disc brakes, tinted rear side windows, seat cover / upholstery: Comfort quality, Sunblind for windscreen, Sunblind for side window, Driver's door, Spray mist reduction, Stabilizer bar on one rear axle, Stabilizer bar front axle, Storage box accessible from outside, Tinted door windows, Visco ventilator, Central locking, Perm. Gross vehicle weight 18.00 t

Condition: used, Nesting work center with automatic loading and unloading Numerical Control with PC - ALPHCAM Software user interface + Alphacam Nesting software Working range in X axis mm 4200 Working range in Y axis mm 2100 Nesting work surface Automatic loading system with lateral table LH \ RH Panel detachment and loading system with 5 suction cups N° 1 vertical electrospindle 3 axes, KW 9, with automatic tool change, HSK F63 cone type Automatic tool change system with n° 6 positions Drilling head DH 17 with n° 17 vertical spindles Automatic unloading system with motorized belt Printing and application system of adhesive labels with labeler Protection and safety system with perimeter grids Safety system with front safety mats Automatic lubrication system Conditioning system for cooling and machine control cleaning No. 3 vacuum pumps 250 m3/h TECHNICAL DETAILS TO BE CHECKED Djlqujwc Uwijp Eiekl

Condition: used, mileage: 5,781 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: semi-automatic, axle configuration: 4x2, wheelbase: 3,620 mm, overall weight: 7,490 kg, maximum load weight: 2,130 kg, first registration: 06/2023, loading space length: 5,240 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, loading space volume: 31 m³, emission class: euro6, color: other, driver cabin: other, suspension: other, Year of construction: 2023, Equipment: ABS, air conditioning, cruise control, differential lock, tail-lift, traction control, trailer coupling, This offer is non-binding. Subject to errors and prior sale. If a foreign currency is specified, this will be done at the current daily rate. The currency of the vehicle's location is valid. Engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm, High Performance Engine Brake, front axle, 4.1 t, rear axle 6.2 t, differential lock rear axle, leaf springs, rear axle, trailer brake, 2-line, wheelbase 3620 mm, plastic tank 180 l, AdBlue tank 25 l, tow bar, tow bar, weight variant 7.49 t (3.6/4.6), S-cab, S-cab, locking system, with central locking, LED daytime running lights, air conditioning, driver's suspension seat, comfort, electronic braking system with ABS and ASR, electric windows, both sides, reversing alarm, fog lights, LED lighting package, lane keeping assistant, Active Brake Assist, cruise control, tail lift BÄR 1,500 kg Djlqup Esv Agt Roiekl

Condition: new, Year of construction: 2024, Planer: Working table dimensions 300x1500 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 300x25x3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 300x660 mm Feed speed 7 m / min Working height 4-220 mm Circular Saw : Working table dimensions 220x1000 mm Delqeg S Nz Aoup Eiskl Shaft rotation 4500/7000 rpm Blade diameter 250x30 mm Processing height at 45 ° / 90 ° 50/80 mm Cutting width with a parallel guide 600 mm The dimensions of the scoring unit are 90x22 mm Milling machine: Working table dimensions 220x1000 mm Shaft rotation 2000/3100/4400/7000 rpm Shaft diameter 30/35/50 mm 115 mm vertical shaft stroke Tool diameter 160 mm Tenon depth 55 mm Three-phase motor power 3.0 - 2.2 HP - KW Trolley dimensions 2200x315 mm Weight 580 kg Machining accuracy is second to none, and 3 independent motors allow for extremely efficient work. The function can be changed with just one flick of the switch. When cutting with a saw, a special sliding beam is used, as is the case with a panel saw. This technology allows for very high machining accuracy. The thicknesser is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.

Condition: used, Year of construction: 1996, Technical details: Dkelqusu Ib Drsp Eiel pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: used, Year of construction: 2006, operating hours: 1,000 h, Functionality: fully functional, machine/vehicle number: G06-107, tool weight: 1,000 g, input voltage: 220 V, Equipment: documentation/manual, • 4 horizontal milling heads to machine the hinges at the rear of the door • A vertical milling head and a horizontal milling head to machine the lock on the front of the door Technical attributes Dslquov Hc H Uep Eiskl Approx. Onsite Dimension. (l x w x h) 2920x1550x1450 mm

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,450 mm, cutting width at rip fence: 140 mm, cutting height (max.): 200 mm, cutting height with scoring (max.): 200 mm, saw blade diameter: 550 mm, table length: 3,200 mm, overall weight: 1,280 kg, rotational speed (min.): 2,800 rpm, rotational speed (max.): 4,800 rpm, power: 7.5 kW (10.20 HP), Equipment: motor brake, scorer, Heavy format circular saw with scoring unit and Siemens three-axis control Hanging control panel with Siemens control and 10" touch display Control of the saw blade height/inclination and positioning of the parallel stop via the control panel Djlquevmfawop Eiekl Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 min¯¹ High weight ensures vibration-free operation Large outrigger table with material roll Extendable aluminum longitudinal stop with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood conveniently operated using a gas pressure spring can be swiveled up Saw blade clamped via tool-free Rapid system The panel saw is set up in our demonstration center in Chemnitz. It is new and in an unused condition. We are happy to help with transport, assembly and instruction.

Condition: used, mileage: 53,200 km, power: 157 kW (213.46 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2022, emission class: euro6, number of seats: 5, Year of construction: 2022, DEK:[9482465] - Used Pickup: Ford Ranger Raptor AWD - Km: 53,200. - Year: September 2022, Engine: 2.0 Bi-TDCi 213cv Euro 6D, 10-speed automatic transmission, - Pickup with insertable four-wheel drive and reduced with electronic switch, rear differential lock, Fox Pro performance suspension, paddle-shift on the steering wheel. - Equipped with: Car climate control, Partial leather and fabric interior, SYNC 3 radio with navigator, Bluetooth and USB, 17-inch alloy wheels, Steel side steps, Xenon headlights, Tinted windows, LED daytime running lights, Cruise control, Rear sensors and park camera, Fog lights, Tow hook, Keyless entry and start, Central locking, On-board computer, Driver, passenger, side airbags, curtain, Double keys, Spare wheel. - Aluminum cargo compartment closure with reel. - Body and Interior in excellent condition, Mechanics with 12 month warranty. - Front and Rear All-Terrain Tires, Single-Owner Vehicle. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sellers: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Como Province) Lombardy opening hours: Monday to Friday: 8.30 / 12.15 - 14.00 / 19.00 Saturday: 8.30 / 12.00 - 14.00 / 17.30 - Certified Mileage. - Possible road test. - Possibility of personalized financing. Carlo Mauri Srl declines all responsibility for any involuntary inconsistencies present in the announcement which does not represent any contractual commitment, the prices displayed are exclusive of VAT and transfer of ownership. Dkjljwb S Nyequp Eiol

Condition: excellent (used), Functionality: fully functional, mileage: 83,538 km, power: 157 kW (213.46 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2020, fuel consumption (combined): 8.9 l/100km, CO2 emissions: 281 g/km, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, Android Auto, Apple CarPlay, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking sensors, power assisted steering, rear view camera, seat heater, second-hand vehicle warranty, traction control, trailer coupling, Come and visit us at our Iperauto headquarters in Como, in via Mariano Tentorio 3. N1 TRUCK - FOUR-WHEEL DRIVE - TOW HOOK VERY WELL EQUIPPED Ford Ranger Raptor double cab with 2.0 tdci 213 hp engine, automatic transmission. Dkolqujwbu Hbep Eiol This imposing Blue Oval pick up is very well equipped, in excellent condition and has: touch screen with SYNC3, navigator and Apple Car Play/Android Auto; DAB/CD/MP3 radio, 12V and USB sockets, Bluetooth with steering wheel controls, on-board computer, multifunction leather steering wheel with gear levers, cruise control and Intelligent Speed Assist, dual-zone automatic climate control, rapid windscreen defroster, heated front seats, partial leather interior, Start&Stop, keyless start/entry, automatic pre-collision braking, lane keeping, road sign recognition, rear parking sensors, rear camera, LED headlights and fog lights, daytime running lights, 17" alloy wheels with All Terrain tyres, roller tow bar, tow hook and much more! What are you waiting for? Come and visit us at Iperauto!  The price indicated is linked to Iperauto promotions and initiatives.       In some cases, the technical equipment and options may differ, therefore it is advisable to consult our sales consultants to avoid inconsistencies in contractual phase.       For other proposals, please consult our website.      Before going to one of our offices to view a vehicle, please contact us to verify the actual location and availability.

Condition: new, Year of construction: 2024, Planer: Working table dimensions 400x1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 400x20x3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 400x760 mm Feed speed 7 m / min Dolqup Ejg S N Agjiekl Working height 4-220 mm General parameters: Three-phase motor power 4.0 - 3.0 HP - KW Weight 380 kg The cast iron structure of the body, the exact limiter of the cross cut and the excellent quality of workmanship allow to achieve the best machining results. Machining is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.

Condition: excellent (used), mileage: 9,857 km, power: 211 kW (286.88 HP), first registration: 05/2024, fuel type: diesel, color: white, axle configuration: 4x4, tire size: 285/70R19.5,, fuel: diesel, wheelbase: 5,350 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, loading space width: 2,550 mm, loading space length: 7,700 mm, loading space height: 2,500 mm, Year of construction: 2024, Equipment: all wheel drive, Technical information Number of cylinders: 6 Engine displacement: 6,700 cc GVW: 16,000 kg Gearbox Gearbox: ZF Powerline, 8 gears, automatic Axle configuration Tyre size: 285/70R19.5, Brakes: disc brakes Front axle: Max. axle load: 6000 kg; Tire profile left: 100%; Tire profile right: 100%; Suspension: parabolic suspension Rear axle: Max. axle load: 10500 kg; Tire profile left: 100%; Tire profile right: 100%; Suspension: air suspension Dslev Tlnbjqup Eiekl Functional Brand of bodywork: De Bruecker Plywood Condition Technical condition: very good Visual condition: very good Damage: none Warranty Warranty: No