Used Glob-Ram for sale (3,398)

Condition: ready for operation (used), Rexroth / Indramat DKR04.1-W400E-BE32-01-FW inverter MNR: R911286532, SN:278810-01206, professionally overhauled and fully tested with 12 months warranty, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Gkjdpfex Dw Ttex Ahdec

Condition: ready for operation (used), Indramat MAC090B-0-JD-1-B/110-A-1/-I01250 Permanent Magnet Motor SN MAC090-93959, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Gjdewqu Uwspfx Ahdekc

Condition: ready for operation (used), Indramat MAC 071B-0-PS-2-C / 095-A-0 three-phase servo motor SN: 14432,used, normal signs of wear, 100% functional, scope of delivery as per photos Gjdeu I Nnrjpfx Ahdokc

Condition: ready for operation (used), Indramat DDC 1.1-K100A-DA01-00 digital servo controller, serial number: 257448-01330A04, used, in good condition, 100% fully functional, delivery as shown in the photos. Gksdpfsx Etv Aox Ahdjc

Condition: new, Year of construction: 2022, operating hours: 1 h, power: 408 kW (554.72 HP), continuous power: 367 kW (498.98 HP), Continuous output 458 kVA / 367 kW Voltage 230 V / 400 V Frequency 50 Hz Engine: Volvo TAD1345GE Fuel: Diesel Tank capacity: 636 liters Generator type: Protection class: IP21 Start type: Electric Generator with AVR control Manufacturer: Pramac Variant: GSW 510 V, Volvo Stage II, PRP 458 kVA / ESP 509 kVA Sound and weather protection hood, Mecc-Alte generator, ACP automatic control, starter battery, 636-liter plastic tank, oil drip pan, engine preheater, 4-pole circuit breaker The Pramac GSW 510V generator, equipped with the Volvo TAD1345GE engine, is an adaptable machine with a high-quality soundproof enclosure and a comprehensive range of accessories. This powerful emergency power generator is ideal for professional use on construction sites, in industry, for rental/events, and in commercial settings. Gjdpjwg Tawsfx Ahdskc With its low noise level, the Pramac GSW 510V generator is specifically designed to provide efficient emergency power for households, agriculture, construction sites, and industry.

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. Gedpsxbtrtofx Ahdjkc The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Condition: ready for operation (used), Indramat MDC 10.20F / MMA-0 / S06 DC servomotor SN: 35638 - Cover missing, see photos, used, minor signs of use, 100% functional, delivery as per photos. Gkodsy Npfnepfx Ahdoc

Condition: ready for operation (used), Indramat MDC9.20B / SSA-1 / S031 DC servomotor SN: 2770, used, good condition, 100% functional, scope of delivery as shown in photos. Gkedpfjy Npfuox Ahdjc

Condition: ready for operation (used), Indramat 109-0780-4B01-01 TKF3 tacho SN:248222-60354, used, in good condition, 100% functional, scope of delivery as per photos. Gedpfxoy Nrw Te Ahdjkc

Condition: ready for operation (used), Indramat TVM 2.4W1/220/380 power supply, serial no.: 251874-07661, used, in good condition, 100% fully functional, scope of delivery as per photos. Gksdpsy Nrxkefx Ahdsc

Condition: good (used), Permanent magnet motor, electric motor, servo motor, permanent magnet main drive motor, DC motor, asynchronous main drive motor, spindle motor, permanent magnet three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor -Type: 090C-0-KD-2C/110-B-0/S001 -Speed: max: 2000 rpm Gedpey N A Aaofx Ahdskc -Shaft: Ø 24 x 50 mm -Number: 3x servo motors available -Price: per piece -Dimensions: 455/140/H195 mm -Weight: 22.7 kg

Condition: ready for operation (used), Indramat MAC 090C-0-GD-4-C/110-A-1/WI578LV/S001 three-phase AC servomotor, serial number: 68558, used, in good condition, 100% functional, scope of supply as shown in the photos. Godpfxjy T Uncj Ahdskc

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C / 110-A-1 three-phase AC servomotor, serial number: 42433, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gsdpfoy T Uniex Ahdskc

Condition: good (used), Here we offer you an Indramat main spindle unit. Indramat RAC 2.2-250-380-A01-W1 main spindle unit Gkedpfxezdqvbo Ahdec Type: 2.2-250-380-A01-W1 Scope of delivery: (See image) 2-week commissioning guarantee The unit comes from a warehouse clearance. We also offer express shipping (DHL, UPS, TNT). We will gladly answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: ready for operation (used), * Brand: Främbs & Freudenberg * Type: banana-screen * Surface: 4000 x 1500 mm - 1 Deck * incl.: Discharge Chute, Support and PU-steel Screens, * Incl.: Springs, Motor and MotorSupport Gksdpfeywl Stsx Ahdec

Condition: ready for operation (used), * Brand: Främbs & Freudenberg * Surface: 5000 x 2000 mm - 2 decks Gedoywmd Ropfx Ahdekc * Driving: 18.5 kW motor * Stock: 1 piece.

Condition: ready for operation (used), * Brand: Främbs & Freudenberg * Surface: 5000 x 1800 mm – 2,5 decks Gedpfxsywmupj Ahdokc * Driving: 18,5 kW E-motor * On stock: 2 pieces.

Condition: ready for operation (used), * Brand: Främbs & Freudenberg Gedpjywm R Dofx Ahdekc * Type: Euroclass * Surface: 5000 x 1500 mm – 2,5 Decks * Incl.: E-motor & springs.

Condition: ready for operation (used), Indramat DDS02.1-W150-D controller, serial number: 263504-50379, professionally overhauled and tested, complete with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Gsdoy U Tm Hopfx Ahdskc

Condition: excellent (used), Year of construction: 1982, Hydraulic guillotine shear, manufacturer KRAMER, Model: TM 3 Hydr. 2000, Year of manufacture: 1982, in very good original condition. Cutting capacity: 2000 mm x 12 mm in steel. Equipped with hold-down device, angle stop, and manual back gauge up to 750 mm, machine feet, and machine documentation available. Very good condition. Machine dimensions: width 3100 mm, depth 2450 mm, height 2250 mm, weight approx. 5500 kg. Gsdpey Siftjfx Ahdekc

Condition: ready for operation (used), Indramat rotor for MAC 090A-0-RD-4-C / 110-A-0 / WI522LX motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gksdpfjzahu Iox Ahdjc

Condition: used, functionality: fully functional, We offer a range of different bull bars. They can be removed by the customer themselves. Gksdpfx Ahjzr Ey Redec

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,220 mm, fork length: 1,550 mm, total length: 1,552 mm, drive type: Elektro, construction width: 550 mm, Low-lift pallet truck Load center of gravity: 600 Fork width: 160 mm Fork thickness: 58 mm Mast type: None Technical condition: New Battery voltage: 48V Gkjdpfx Aozuh Ebohdjc Battery year of manufacture: 2026 Battery condition: New CE certificate Performance data: Travel speed with load: km/h 4.0, Travel speed without load: km/h 4.5

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,220 mm, fork length: 1,150 mm, total length: 1,552 mm, drive type: Elektro, construction width: 550 mm, Pallet truck Load center: 600 Fork width: 160 mm Fork thickness: 58 mm Mast type: None Technical condition: New Battery voltage: 48V Battery year: 2025 Battery condition: New CE certificate, Gkedpfxjzwzifs Ahdoc

Condition: excellent (used), RAMA Modular Belt Conveyor – 3.00 m x 250 mm – Stainless Steel RAMA industrial conveyor belt with a modular belt, designed for the continuous and controlled transport of products or packaging between different stages of a processing or packaging line. The equipment features a 250 mm wide plastic modular belt with an approximate length of 3 meters, mounted on a structure made primarily of stainless steel. It incorporates adjustable side guides that allow the product to be kept correctly oriented during its movement. Its compact and linear design allows it to be used as a connecting element between different machines, facilitating a continuous and automated production flow. MAIN FEATURES -Manufacturer: RAMA -Type: Modular belt conveyor -Approximate length: 3.00 m Gkedpezxww Iefx Ahdec -Belt width: 250 mm -Configuration: linear -Plastic modular belt -Continuous product transport -Motorized drive -Product side guides -Adjustable guides for format adaptation -Construction primarily in stainless steel -Open and accessible structure -Adjustable support legs -Hygienic design for the food industry -Suitable for continuous industrial operation -Integrable with process and packaging machinery PROCESS The product or packaging is received from the previous machine and is transported continuously by the motorized modular belt. The side guides control its trajectory and maintain an adequate position during transport until it is discharged to the next piece of equipment. It can be used for: -Connecting machines -Transporting empty packaging -Transporting full packaging -Product transfer -Feeding filling and closing machines -Output from packaging machines -Feeding inspection equipment -Transport to end-of-line equipment APPLICATIONS Especially suitable for the food, canning, beverage industries, and filling and packaging lines that require a simple and robust solution to connect different pieces of equipment. Depending on the format and adjustment of the guides, it can be used to transport cans, jars, bottles, trays, packages, and other packaging or products compatible with a modular belt. The combination of 3 m length, 250 mm width, modular belt, and adjustable guides provides a versatile solution for automating the internal transport of products. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.