Used Seneca Tools for sale (30,442)

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details turning diameter 320 mm turning length 810 mm control FANUC MSX-701 / MAPPS 3C total power requirement 89 kVA kW weight of the machine ca. 8,3 t Additional information CNC high-performance CNC turning and milling center The machine has been running with oil. Condition: Very well maintained, the machine has recently been checked by a service technician with geometry measurement. We can send you with WhatsApp videos of the machine check up of our service technican. The machine has received a new Mapps unit with the latest version Mapps 3C including USB connection. Costs approx. EUR 8-10,000 including installation. Cjbjwhvdzsu Uc U Eorb Equipment: CNC control FANUC MSX-701 / MAPPS 3C Bar loader LNS SPRINT 552-565 Collet chuck HAINBUCH SPAN-TOP 65 on main and sub-spindle Basic range of standard turning holders and driven holders Fire extinguishing system made by Siemens Chip conveyor Coolant system with high-pressure filter system Workpiece unloading device with gripper Tool pre-setting device on spindle 1 and 2 Technical data: Swing diameter over bed 800 mm Swing diameter over cross slide 800 mm Maximum turning diameter 320 mm (interference with turret cover) Standard turning diameter 200 mm Maximum distance between the centers 1130 mm Maximum turning length 810 mm Maximum workpiece size 300 mm Travels: X-axis turret 1 and 2 210/210 mm Y-axis 100 mm (+65/-45 mm) Z-axis turret 1 and 2 810/810 mm B-axis 920 mm (headstock 2) Main spindle: Maximum speed 5000 rpm. Number of speed ranges 2 Drive power 25/22 kW (30 min/continuous operation) Maximum bar diameter 65 mm Spindle bore 73 mm Spindle diameter in front bearing 120 mm Spindle mount JIS A2-6 C-axis resolution 0.001 degrees Sub-spindle: Maximum speed 5000 rpm. Number of speed ranges 2 Drive power 25/22 kW (30 min/continuous operation) Maximum bar diameter 65 mm Spindle bore 73 mm Spindle diameter in front bearing 120 mm Spindle mount JIS A2-6 C-axis resolution 0.001 degrees Feed drives: Rapid traverse turret 1 X/Y/Z 30/20/50 m/min. Rapid traverse turret 2 X/Z 30/50 m/min. Tool turret: Number of turrets 2 Number of tool stations per turret 16 Of which 16 prepared for driven tools Shaft cross-section for turning tools 20 x 20 mm Maximum shaft diameter for boring bars 32 mm Turret switching time (1 station) 0.18 s Maximum speed of the driven tools 6000 (12000) rpm Drive power for driven tools 7.5/5.5 kW (5 min/continuous operation) Dimensions, weights: Installation area without chip conveyor 3930 x 2721 mm Installation area with chip conveyor, ejection on the right 5120 x 2721 mm Total height (without automatic door) 2320 mm Net weight 8300 kg

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, Equipment: chip conveyor, rotational speed infinitely variable, Mazak Machining Center Cjbu Uc Usvu Sudo Eerb Type VTC - 200C Mazatrol Cnc Pc-Fusion-Cnc 640 M Year 2001 Machines Sold With A Divider + Tooling + Documentation + Cutting Conveyor Visible Under Voltage In Production

Condition: used, Year of construction: 2015, Serial number: WSJPRS327FTJ2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19378 Specifications: - 2015 model - Air suspension - Tires (see pictures) - Palfinger lift - Tool box - Thermo king cooling/freezer unit - Length: 1,379 cm - Width: 260 cm - Wheelbase: 131/131 cm - Net weight: 10,890 kg Crjbu Uc Usvgxxys Ejb - Max payload: 34,110 kg Description: System trailer cabinet semi with cooling/freezer unit and lift. Has been standing for a while so it is possible the unit is out of power. Can be delivered within a short time. Technical approved: Yes EU-approved until: 20.03.2026 Own weight: 10890 Total Weight: 45000 Payload: 34110 Width: 260 Length: 1379

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,908 h, Control Unit Brand SIEMENS Main Drive Spindle speed range 20000 rpm Number of axis 5 Tools Type of tool holder HSK-63 Additional Equipment Csbu Uc Uswfilge Esrb Capacity for Tools in Magazine: 60 This 5-axis DMG MORI DMU 95 monoBLOCK was manufactured in 2019 and is a vertical machining center. It features a speedMASTER® motor spindle capable of 20,000 rpm, HSK-63 tool holder, and a generous 60-tool magazine capacity. Travel dimensions are 950 mm x 850 mm x 650 mm. If you are looking to get high-quality milling capabilities consider the DMG MORI DMU 95 monoBLOCK machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), vacuum furnace, chamber furnace -Vacuum furnace: with vacuum pump -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm Crsbeif Sbiju Uc U Esb -Weight: 180 kg -Control: Two-point control using program control

Condition: used, Year of construction: 1986, serial number 7175455 3 Backenfutter Durchm. 30 Crsbu Ucswhq Dpo U Eob tool taper ja turret head für 6-fach-Belegung centre distance ca. 700 mm turning diameter max. ca. 450 mm Control FANUC dimensions of the machine ca. 3.000 x 2.000 x 2.200 mm

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Technical details x-travel 2000 mm Crsbu Uowhvapec U Eob y-travel 2300 mm z-travel 1000 mm Control Siemens 840 D total power requirement 153 kVA weight of the machine ca. 67,0 t dimensions of the machine ca. 9,0 x 7,5 x 5,1 m Additional information Used universal machining center for turning, drilling and milling. Large machine in portal design with fixed portal and movable base with integrated rotary table / turning station and pallet holder. New price EUR 1.327.160,- (without service) The machine can be demonstrated and tested under power/chip. Technical data: Control: Siemens 840 D Max. workpiece diameter: 2000 mm Distance spindle nose to pallet surface min. 150 / max. 1120 mm Pallet changer: 2-way pallet changer with set-up station, pallet buffer space and rotating pallet transfer station Pallet size Diameter 1250 x 200 mm and Diameter 1600 x 230 mm Pallet clamping surface designed with 12 star-shaped T-slots 22H9 Pallet center hole diameter 100 mm H6 Maximum permissible pallet load 3000 kg Rotating spindle speed range: 1 - 400 rpm Rotating spindle drive power: 70 kW Drilling and milling spindle: HV swivel head as B-axis by 90° freely programmable Water-cooled AC main drive as motor spindle Speed range of drilling and milling spindle: 1- 12000 rpm Drive power of drilling and milling spindle: 40 kW (S1-100%) Maximum spindle torque 137 Nm Hydraulic weight compensation for the spindle slide Spindle positioning per degree (M19) Main spindle bearing diameter 70 mm Cutting performance: Solid drilling diameter 50 mm in C45 Tapping M 42 in C45 Milling 400 cm³/min. in C45 Milling 3000 cm³/min. in aluminum Travel: X-axis: 2000 mm (cross slide travel) Y-axis: 2300 mm (longitudinal table travel) Z-axis: 1000 mm (spindle slide stroke) Carousel turning station with C-axis operation and holder for pallets with diameters of 1250 and 1600 mm Double main drive, each with an integrated water-cooled main drive motor and automatically switching gearbox with transmission ratio 1:4 Main drive 70 kW (S6-60%) Maximum speed 400 rpm. Maximum torque 25000 Nm Main bearing designed with 845 mm diameter axial bearing and 200 mm diameter radial bearing (2-way) Technical data C-axis drive: Number of positions 360,000 Measuring system directly via ROD Positioning accuracy +/- 0.001° Repeatability accuracy +/- 0.0005° Maximum speed 15 rpm

Condition: used, Year of construction: 2001, Functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, PMER Lathe Type 430 Year 2001 Anilam 4200T CNC Video Available Crobuev Uafdo Uc U Eob Complete Machine With Tooling With Goggles With Documentation

Condition: used, mileage: 780,000 km, Year of construction: 2010, Serial number: YV2J1D1A8AA69xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18367 Specifications: - 2010 model - Km: approx. 780,000 - Gear: ishift - Tires (see pictures) - Inside length: approx. 760 cm - Internal width: approx. 245 cm - Internal height: approx. 270 cm - Two sets of tires - Full side opening - 2000 kg Zepro lift - Euro 5 - Length: 1,030 cm - Width: 255 cm - Wheelbase: 560 cm - Net weight: 10,150 kg - 4x2 - 337 hp - Tool box - Extra lights - Damage to mirror, see pictures - Rust, shown in pictures - Bed - Radio/cd - Climate/ac Description: 2010 Volvo FM 330 cabinet truck with full side opening and lift. The truck comes with two sets of tires. Cjbu Ucjvgx U Us U Ejrb It has recently had a 2-year check on the printer. Can be delivered within a short time. Km: 780000 HK: 337 Technical approved: Yes EU-approved until: 30.06.2025 Own weight: 10150 Total Weight: 10225 Payload: 9275 Width: 255 Length: 1030 Euro: 5

Condition: good (used), Angle grinder, cutoff grinder -unfortunately: no nameplate -Dimensions: 560/140/H2400 mm Cjbofc D N Seu Uc U Esrb -Weight: 6.3 kg

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens SINUMERIK 810D weight of the machine ca. 5,2 t dimensions of the machine ca. 6648 x 2735 x 1973 mm Additional information Centre height 570 mm Centre height over flat track 280 mm Diameter over bed 570 mm Diameter over cross slide 365 mm x-axis 345mm x-axis feed max. 2500 mm/min z-axis feed max. 5000 mm/min x-axis rapid traverse max. 5000 mm/min z-axis rapid traverse max. 10000 mm/min x-axis feed force 7,100 N Crjbu Uc Uowhu Urs Eeb z-axis feed force 12500 N Feed control 0% - 120% max. workpiece weight from front edge of clamping device 400 kg with tailstock 1000 kg with tailstock and 1 steady rest 1300 kg with tailstock and 2 steady rests 1600 kg Main spindle: Spindle / bore / spindle Ø in the front bearing DIN 52027 - A 8 / Ø62 / Ø100 Inner taper of the main spindle metric 70 Drive power 25 kW 60%; 20 kW 100% ED Torque max. 1800 Nm / 1400 Nm 2 gear stages Speed range 3-2500 rpm Speed range gear step 1: 3-500 rpm Speed range gear step 2: 15-2500 rpm Tool: SAUTER 8-station turret: Ø40 Turret no.: 0.5.480.516-089768 ComNo. 06.09216 Tool holders DIN 69880 / Ø50 Lathe tool - cross-section according to DIN 770 h x w 32 x 25 Tailstock: Quill diameter 100 mm Inner taper quill MK 5 Quill travel 190 mm Cooling: frequency controlled 1 bar/10 ltr - 4 bar/20 ltr; 2-stage programmable Dimensions: max. machine size (without chip conveyor) 4300 x 2131 x 1973 mm Space requirement (incl. chip conveyor) 6648 x 2735 x 1973 mm Accessories: 3-jaw chuck, diameter 250 mm chip conveyor, make KNOLL, built 2015 fixed steady rest moving steady rest various tool holders

Condition: used, Year of construction: 2007, Functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Somab Lathe Type Deltamab 300 Year 2007 Siemens Sinumerik 840D CNC With Tooling With Tailstock Cobu Usv Rfi Tsc U Esrb With Chip Conveyor With Documentation

Condition: used, Year of construction: 2001, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens Sinumerik 810 D spindle bore 62 mm spindle turning speed - stepless 3 - 2500 U/min transmission ratio 2 feeds - longitudinal max. 10000 mm/min feeds - cross max. 5000 mm/min tailstock quill taper MT 5 main drive motor 20/30 kW Dimensions (LxWxH) 4,10 x 2,16 x 1,98 m total power requirement 35 kVA weight of the machine ca. 5,3 t Additional information The machine was used in 1-shift operation. Equipment/accessories: Cebu Uewhu T Uec U Eorb * CNC control SIEMENS Sinumerik 810 D * Tool/swivelling holder Parat size 3, Sandvik Capto C4 * Boring rest * Full clamping cylinder Forkardt OKRJ 120 for operating power chucks * Hydraulic unit Hydac * Steady-rest, diameter 20-315 mm * 3-jaw manual chuck, diameter 315 mm * Coolant device * Chip conveyor

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Csbu Ucewhu Tus U Ejrb Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21. If you are interested, the machine can be demonstrated under power/chip.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Technical details x-travel 3500 mm y-travel 2200 mm z-travel 1200 mm Control Heidenhain iTNC 530 total power requirement 45 kW weight of the machine ca. 48 t Additional information Crebu Ujwhu S Rjc U Eeb The milling spindle was renewed / overhauled in November 2024. Operating hours 15918 Travels: X/Y/Z 3500/2200/1200 mm Table clamping area 3000 x 2000 mm Rapid traverse X/Y/Z 30 m/min. Max. spindle speed 20000 rpm Tool holder HSK A 63 Power 30 kW Torque 80 Nm Equipment: Heidenhain iTNC 530 CNC control Universal milling head with B axis -110°/+110° and C axis -200°/+200° 32-ATC tool changer Coolant through spindle 24 BAR THREE-DIMENSIONAL PROBE HEIDENHAIN TS 460

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Technical details x-travel 750 mm y-travel 400 mm z-travel 500 mm Control Heidenhain TNC 320 spindle turning speed range 3800 U/min transmission ratio 2 tool taper 40 SK table-size 1500 x 670 mm table surface area 1270 x 320 mm table load 600 kg spindle drive 5,5 kW distance spindle /table 100-600 (min.-max.) mm distance spindle center to column 526 mm quill travel 120 mm weight of the machine ca. 2,2 t dimensions of the machine ca. 3,10 x 2,45 x 2,50 m Additional information CNC universal milling machine comes from a swiss company. Year of production: 2010 First machine installation: 2012 Equipment: * 3-axes CNC-control Heidenhain TNC 320 * Additional handwheels for manual operation * Manually swiveling milling head (45 /90 deg.) with drilling quill * Central lubrication * Coolant equipment * Documentation/manual Cobu Ucswhu Swo U Eerb Maximum machining capacities: Drilling mild steel 40 mm diameter Tapping M 36 Boring 120 mm

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Technical details x-travel 290 mm y-travel 150 mm z-travel 330 mm Cobu Uowhu R Hjc U Ejrb table surface area 210 x 600 mm tool taper SK 40 total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 rpm. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min.

Condition: good (used), Functionality: fully functional, machine/vehicle number: S/N° 8070, Two DECKEL FP 2 machines are available. Machine in green has the serial number 8070 Stock No. 2372 Technical details x-travel 400 mm y-travel 190 mm z-travel 325 mm Table surface 700 x 240 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Feed and rapid traverse in 3 axes Vertical + horizontal spindle Adjustable angle table Vertical milling head can be swiveled Cebu Uowhu N Nec U Eerb Machine in blue/gray has the serial number 2906 Stock No. 2371 Technical details x-travel 500 mm y-travel 170 mm z-travel 315 mm Table surface 700 x 280 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Mitutoyo Rigid angle table Vertical + horizontal spindle Vertical milling head swivels Feed and rapid traverse in 3 axes Machine lamp

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Technical details grinding length 1250 mm grinding width 600 mm Control SIEMENS LC 200 / TP277 weight of the machine ca. 7,7 t Additional information CNC precision, surface and profile grinding machine CNC control SIEMENS LC 200 / TP277 Dresser - straight Table load maximum to the magnetic chuck 1200 kg Drives: X-axis drive hydraulic Y and Z-axis drive with servo drive and ball screw measuring system: X-axis rotary with rotary encoder Y and Z axis linear scale traverse paths X axis 1400mm Y axis 600mm Z axis 600mm Grinding length 1250 mm Grinding width 600 Distance between table and spindle center 700 mm Cebu Uc Ujwhu Nce Ejrb Grinding wheel diameter 400 mm Grinding wheel width 100 mm Grinding wheel bore 127 mm Note: Machine will be sold without a coolant device.

Condition: good (used), Year of construction: 1995, Functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Crebuewhu Irj Uc U Eeb Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: good (used), Year of construction: 1992, Functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stone (3 of them unused) Cjbu Uc Ujwhu Ife Eorb Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Technical details Csbjwhu H Iou Uc U Eorb workpiece diameter 800 mm workpiece weight 1000 kg workpiece height 480 mm Control Siemens 840 Di total power requirement 15 kW weight of the machine ca. 6000 kg dimensions of the machine ca. 2750 x 2590 x 2310 mm Accessories coolant equipment with paper band filter Additional information Machine comes from a plant closure Equipment: CNC control SIEMENS Sinumerik 840 Di Electromagnetic clamping plate Frequency converter (inverter) for changing the motor speeds Coolant system with paper belt filter Grinding wheel with flange Lighting of the work area Technical data: Largest grinding diameter 800 mm Rotary table diameter 600 mm Rotation speed 15-150 rpm Cross travel 550 mm Cross speed adjustable 0-8 m/1 Grindable height vertically 480 mm Grinding wheel speed 1500 rpm Grinding wheel dimensions diameter 400x60x127 mm Grinding wheel motor power 11 kW Hydraulic motor power 4 kW Max. table load 1000 kg

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Technical details cutting diameter 730 mm saw band length 9195 x 67 x 1,6 mm cutting width 830 mm Control Kasto total power requirement 30 kW weight of the machine ca. 11,6 t Crjbu Ucjwhu Hns U Esb dimensions of the machine ca. 4800 x 2600 x 2870 mm Additional information Heavy-duty, high-performance band saws with a horizontally and parallel-traversing saw blade for cutting solid material, profiles, and pipes of all qualities, including difficult-to-cut materials such as titanium, Hastelloy, Inconel, etc. The optimal use of carbide or bi-metal saw blades was consistently considered during the development of these machines. Cutting range Cutting diameter: 730 mm Cutting width: 830 mm Saw blade size: 9195 x 67 x 1.6 mm Total power requirement: 30 kW Machine weight: 11600 kg Machine dimensions (L x W x H): 4800 x 2600 x 2870 mm Equipment: Carbide package With driven heavy-duty roller conveyors for the infeed and outfeed sides. Roller conveyor on the inlet side, dimensions (LxWxH) 4000x1000x500 mm Roller conveyor on the outlet side, dimensions (LxWxH) 3000x1000x500 mm Weight 2000 kg Chip conveyor

Condition: good (used), Year of construction: 1986, Functionality: fully functional, cutting diameter 420 mm saw band length 6300 mm cutting width 420 mm capacity 90 degrees: square 420 x 420 mm cutting speed 20 - 130 m/min dimensions of saw-band 6300 x 38 x 1,3 mm sawing motor 4,0 kW Dimensions (LxWxH) 2420 x 3050 x 2150 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t Additional information Used fully automatic band sawing machine Smallest cut-off length 6 mm Automatic feed length single 600 mm Feed length multiple 5400 mm Minimum offcut length single cut 75 mm Automatic operation 115 mm * Hydraulic saw blade tensioning * Infinitely variable cutting feed * Hydraulic material feed * Automatic feed with horizontal vice, hydraulic material clamping, infinitely variable * Coolant device * Chip conveyor Crsbswhu E Reu Uc U Esb * Roller-type conveyor, approx. 2500 x 500 mm

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= Crebowhuzxju Uc U Eob 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW