Used Walinga Agri-Vac for sale (6,638)

Condition: used, Used stainless steel conical mixer-dryer by Hosokawa Micron type 3-VDC-22. Total volume 798 l, working volume 300 l. Deln Uerdgzzecdqout Drying chamber is rated full vacuum. Working temperature up to 80 C. Conical bottom is equipped with heating coil with total volume 46 l, designed for work on pressure 6 bar, at working temperature up to 130 C. Elipsoidal top has inspection manway with diameter 250 mm equipped with bolted lid. Top has heating coil with volume 7,4 l, designed for work on pressure 6 bar, and working temperture up to 130 C. Dryer has stainless steel unsupported mixing screw driven via gearbox and el. motor 1.5 kW. Rotating arm is designed in stainless steel and driven via gearbox and el motor 0.25 kW. All motors are in Ex design (EExeIIT4). Bottom central discharge via outlet with diameter 200 mm and pneumatically operated ball valve. Last time machine had been working in pharmaceutical industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

Condition: new, overall weight: 10,500 kg, empty load weight: 3,140 kg, maximum load weight: 7,360 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dsln Ucdswg Rmzoqjut

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: EH320D, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness copper (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness (max.): 20 mm, roller (top) diameter: 350 mm, roller diameter: 450 mm, overall weight: 11,000 kg, total length: 5,200 mm, total height: 1,680 mm, total width: 1,700 mm, roller (bottom) diameter: 330 mm, bending length: 3,100 mm, type of input current: three-phase, working length: 3,000 mm, roller length: 3,100 mm, sheet width: 3,100 mm, working width: 3,000 mm, side roll diameter: 250 mm, working height: 800 mm, power: 11 kW (14.96 HP), bending radius: 250 mm, Equipment: documentation/manual, emergency stop, Hydraulic plate bending machine 4-roll capacity width 3000x20 mm thickness Brand MG model EH320 used machine year 2001 Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 20 mm pre-bend 16 mm minimum rolling ID 420 mm depending on plate thickness and strength. --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm side rolls 250 mm Power electric 15Hp voltage 380/50 Vac --- configuration Hardened surface of the 4 rolls Dual driven central rolls rotation hydraulic motorized with gear unit each roll. Duelnowic A Hs Ucdqjt Conical plate bend hydraulic attachment for cone bending. Re-rolling device for calibration roundness of welded shells Front open hydraulic drop-end to unload the closed rolled plates Control console hydraulic commands with digital readout Digital position readout of side rolls Safety and emergency systems installed Manuals and schematics along with the machine

Condition: used, Drive (2 units available) Make Mannesmann Rexroth Ident. No. 895107232 Serial Nr. 394401 Duoln Ucodf Raxedqet Code MCR5F47OF180Z Brake make Knott GmbH

Condition: used, In this offer you purchase a used B/W production system "Ricoh Pro 8200S" Object of sale: 1 x Ricoh Pro 8200S with the following equipment: incl. Vacuum Feed LCIT RT5100 incl. SR5050 staple finisher Not the right equipment? It is no problem to configure the machine according to your wishes. Please contact us! Counter readings: Total: Approx. 6,786,699 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Dsln Uetw R U Eocdqsut The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: new, Year of construction: 2025, Fields of application: Recycling and mining Empty weight: 3.500 kg Serial number: 040 Condition undercarriage: 100% Deln Ucdowf A Nljqjut New and Unused Xrok Transporter 3030T Mobile tracked stockpiling conveyor belt, powered by Perkins 403J-11 engine with 25HP (18,4kW), EPA Compliant, 30ft (9 Mtr) length, belt width 30" (760mm), EP400 3 ply conveyor belt, galvanized inner legs, polyurethane belt scraper, remote greasing, hydraulic cylinder for raise and lower, rubber tracks, operating weight 3,500 Kg, CE marked. Delta Machinery is an authorized distributor for Xrok. Inspections are welcome. New Xrok stockpiling conveyor belts available from stock!

Condition: used, Second hand stainless steel contact parts twin shaft planetary dissolver by Molteni type TM5 RP.SV. Djlnsrdg Icj Ucdqjut Mixer has stainless steel jacketed mixing pan with internal diameter 207 mm x depth 213 mm. Total volume of pan is 7 l, working volume about 5 l. Mixing pan has side wall bottom discharge outlet. Mixer has two agitators with toothed discs and one wall scrapper. Toothed discs have diameter 100 mm and are driven by vari speed gearbox and two speed el. motor 1.75/1.4 kW, 2800/1400 rpm, 380 V, 50 hz, in EEx-d II B T4. Working rotation of disc agitators manually adjustable in range from 300 up to 4800 rpm. Wall scrapper is driven by el motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz (design EEx-d II B T5) through reducer with ratio i= 44.77, what gives output rotation at 32 rpm. Agitators are risen by hydraulical device driven by el. motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz, EEx-d II B T5 design. Machine is equipped with local control panel and pneumatic vacuum pump by Piab. Machine is mounted on steel mobile cabinet. Additional equipment included with mixer: pneumatically operated press for emptying mixing pan, stand for emptying/cleaning mixing pan.

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. Dsln Uovxtkzocdqsut SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa

Condition: excellent (used), Year of construction: 2014, Working range: X-axis: 3280 mm Y-axis: 1620 mm Z-axis: 245 mm Feed speeds: X-axis: 80 m/min Y-axis: 60 m/min Z-axis: 20 m/min Vector speed: 100 m/min Electro spindle: HSD 5 axes 11 kW with continuous 360° rotation on B and C axes, enabling machining of complex shapes with high precision liquid cooled Duslswhypnjn Ucdqjt Drilling head: HSD  20 vertical spindles 4 horizontal grooving saw in X-axis grooving saw in Y-axis Working table:  6-piece beam 4 suction cups on 1 beam preparation for uniclamp Tool magazines: 16-position turret magazine Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring a firm clamping of workpieces during machining Software: bSolid

Condition: good (used), Horizon EF-354 Pharmaceutical Folding Machine Machine in perfect condition. Compact external dimensions, construction mounted on wheels for easy movement. Technical data: Max. format 350x650mm Min. format 50x70mm Weight: 40-240gsm Speed: 30,000 pcs/h 4 parallel cassettes Min. fold 20mm Power supply 230V electrically controlled delivery from the machine’s control panel, 4 delivery belts. counter with a packaging function, a special system that always ensures perfect packages (does not make mistakes) smooth adjustment of speed and feeding Duoln Uswh Nrfecdqjt nonstop feeding from the vacuum drum from the bottom soundproofing on all units and cassettes documentation

Condition: used, Year of construction: 2017, Working dimension X: 3.000 mm Working dimension Y: 1.550 mm Working dimension Z: 250 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool changer positions: 28 Linear tool changer: Yes Disc tool changer 18-fold: Yes Pickup change place: Yes Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Workpiece support aids: Yes Two rows of stops: Yes Number of consoles: 6 Pneumatic pipe connectors: an den Konsolen Dsln Uov Ezk Njcdqsut Vacuum pump: Yes Safety device: Safety mat Chip conveyor: Yes Interface for .dxf data: Yes Automatic lubrication: Yes Chip deflector: Yes Control: PC control Software: FORMAT 4 WOOD FLASH, MICROSOFT WINDOWS 7 Total connection: 19 kW

Condition: new, overall weight: 10,500 kg, empty load weight: 3,280 kg, maximum load weight: 7,220 kg, axle configuration: 2 axles, loading space volume: 11 m³, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dujlnjwg Ei Ds Ucdqot

Condition: used, Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Dusljvtqz Hen Ucdqot Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included.

Condition: excellent (used), Functionality: fully functional, Central conveyor system consisting of: Delnswg H R Nj Ucdqeut 1. Piovan type F44/2 vacuum pump 2. 10 Piovan material conveyors 3. 2 Piovan type LYBRA V coloring devices

Condition: not inspected (used), Year of construction: 2000, Functionality: unexamined, Machining area: X-axis: 3,000 mm Y-axis: 1,050 mm Clamping table: 6 workpiece supports for hoseless vacuum cups 15 vacuum cups available in total 4 lifting rails for heavy workpieces Vacuum pump capacity 100 cbm/h Unit equipment: Milling unit with 7.5 kW motor, Speed 1,500 - 20,000 rpm HSK F63 tool holder Right/left rotation 360-degree C-axis for adapter units 12-station tool magazine, moving along the support in the X direction Vertical drilling: X-axis: 6 spindles, 32 mm pitch Y-axis: 6 spindles, 32 mm pitch Control system: HOMATIC IPC with WOODWOP 5.0 Safety equipment: * Safety mats in front of the machine * Protective fence Right with access door Power requirements: 380 V, 50 Hz, 3-phase Accessories: * 90-degree saw adapter unit * 4-way horizontal drilling adapter unit (crosshead) Djln Ucdjwgb H Ssqout * Lock case milling unit Tool-free

Condition: like new (used), Year of construction: 1996, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Dimensiones mesa: 6.000 x 2.000 mm Número de ranuras T: 13 Medidas ranuras T: 22 mm Traverses of axis Recorrido longitudinal X: 6.000 mm Recorrido transversal Y: 3.800 mm Recorrido vertical Z: 1.000 mm Capacidad vertical (VC): 500 / 1.500 mm (salida directa) Distancia entre columnas: 3.100 mm Milling head Cabezal universal (UM40 – Cuerpo B: manual / Cuerpo C: 3º auto-indexado) y Salida directa Amarre herramienta: Hidráulico Cono: ISO50 (DIN-69871)  /  Tirante: DIN-96872 Gama de velocidades: 3.000 rpm Potencia mandrino: 30 kW Feedrates Avances rápidos (X / Y,Z): 7.200 / 12.000 mm/min Weight and dimensions Peso aproximado máquina: 50.000 Kg Peso máximo sobre mesa: 15.000 kg Dimensiones aproximadas máquina: 14.740 x 5.330 x 5.050 mm Accesories Carenado: 2 puertas correderas con nuevo vallado perimetral de seguridad Cambio de cabezales: automático con bisagra/soporte lateral en columna Evacuador de virutas: 2 longitudinales por paletas Volante electrónico: Nuevo HR-510 Taladrina: Externa e interna alta presión a través del mandrino (interna sólo con la salida directa) Dolnewfunyj Ucdqjut Sales conditions Garantía: Repuestos mecánicos 6 meses Precio y condiciones de venta: Consultar View all technical features

Condition: used, Year of construction: 2022, Working dimension X: 3.300 mm Working dimension Y: 1.250 mm Working dimension Z: 150 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 12 Vertical drilling spindles: 18 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Dolewg Smvon Ucdqsut Groove saw: in Y-direction, in X-direction Gantry machine: einseitig angetrieben Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 6 Positioning aid: Yes Laser projector: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Bumper Pendulum machining: Yes Interface for .dxf data: Yes Automatic central lubrication: Yes Control: FORMAT 4 F4 INTEGRATE Handheld terminal: Yes Software: FORMAT 4 F4 OPERATE, FORMAT 4 F4 TOOLBOX, FORMAT 4 F4 CREATE, PC office licence Conformity marking: CE mark, UKCA-Zeichen Total connection: 18 kW

Condition: new, overall weight: 13,000 kg, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions can be plugged in, geared support winch with load and fast gear, front, mounting shaft for two aluminum drive-on ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , -- Misprints, errors and omissions excepted, sample images --, More data under: !, More Details: ! Delnowg Ekho Ucdqjut

Condition: as good as new (ex-display), 4 available. Unused ZVU Strojirny approximately 89,520 litre total capacity & 73,500 litre working capacity 316L stainless steel vertical reactor. Unit measures approximately 4,100mm internal diameter x 5,750mm straight side (tan to tan). Unit has welded dished top and bottom heads. Internal rated 6 bar/full vacuum design pressure at 170 deg.c. Has external half-pipe coil jacket on bottom half of straight side and bottom dished head rated 10 bar/full vacuum design pressure at 170 deg.c. Unit has top entry 316L stainless steel 4-blade agitator driven by ABB 350kw, 1500rpm, 3/50 motor through SPX Flow type 7000N350V gearbox with reduction ratio of 7.94/1 giving approximately 189rpm output. Reactor body is mounted on (4) 304 stainless steel side supports. Unit built in 2021 and currently stored nitrogen purge. Dujln Ucdevtqcdsqot

Condition: used, Year of construction: 2007, WOHLENBERG Perfect Binding Line CITY E 6000 year 2007 Overview: SPRINTER E gathering machine SOLEMA 6353 book block feeder CITY E 6000 perfect binder transport and drying line MULLER MARTINI 3671 MERIT S three knife trimmer RIMA RS-3310S book stacker BVM BMS 6030 W shrink wrapping machine Configuration: SPRINTER E gathering machine - handfeeding station - 16 stations with WST opticontrol OSC 1-1 - set up element - criss-cross delivery - transfer unit to the binder (without vacuum pumps) SOLEMA 6353 book block feeder CITY E 6000 perfect binder - 15 clamps - operation terminal with colour touch-screen display - milling and roughening station (without dust extraction system - was connected to a centralized dust extraction system) - front edge trimming unit VSS - hotmelt spine gluing unit with integrated Premelter - hotmelt side gluing unit with integrated Premelter - PUR spine gluing unit - rotary cover feeder - scoring station - 2 nipping and pressing stations - lay down device to the left Technical specifications: Duoln Ucer Hhi Rjdqjt mechanical speed: up to 6.000 cycles/h transport and drying line - length: approx. 50 m - with emergency delivery MULLER MARTINI 3671 MERIT S three knife trimmer (year 1997) - right hand infeed - standard changeable cutting tables (no. 4 - 17) Special equipment: - 2 set of knives Technical specifications: mechanical speed: up to 4.000 cycles/h RIMA RS-3310S book stacker - with delivery to the right BVM BMS 6030 W shrink wrapping machine - with shrink tunnel

Condition: used, Year of construction: 2016, For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing Dslnjwf Dbpo Ucdqeut More information and pictures can be sent on request.

Condition: ready for operation (used), Year of construction: 2019, Additional Equipment Optional: 1x print head kit / 1x material cartridge / 1x installation space filter / 1x fresh air filter Delnjwgfz Ts Ucdqsut This HP Jet Fusion MJF 580 color plastic 3D printer was manufactured in 2019. It features a power capacity of 6300W, operating on a voltage range of 200-240 Vac with a frequency of 50/60 Hz. Despite showing an error message, consider the opportunity to buy this HP Jet Fusion MJF 580 color plastic 3D printer. Contact us for more information. Application Types 3D Printing

Condition: used, Year of construction: 2019, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 20117 2019 Sandvik DX800I Drilling Rig with GPS and CME Grinder Deljwdu Hasn Ucdqjut Model year: 2019 Hours: Approx. 8900 hours (can increase) Stroke hours: Approx. 3370 hours Weight: Approximately 20,000 kg New belts: May 2023 Chassis: See pictures Leica GPS CME grinder Vacuum cleaner Winch Mounted larger hammer RD 925 (October 2023, cost 391,000 NOK) New belt drive (June 2024) New hydraulic tank (December 2024) Remote control Radio/CD Air conditioning/AC Ready for delivery Description: Well maintained Sandvik DX800I drilling rig from 2019, with approx. 8900 hours. The rig has received significant upgrades in the last two years, including new hammer RD 925 (October 2023), new tracks (May 2023), new track gear (June 2024) and new hydraulic tank (December 2024). All services have been followed up, and maintenance is in order. Fitted with Leica GPS, CME grinder, vacuum cleaner, winch and remote control. Ready for delivery! Total Weight: 20000

Condition: new, overall weight: 11,900 kg, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dsln Ucewg Eh Hjdqsut

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: AL1/004666, travel distance X-axis: 2,650 mm, travel distance Y-axis: 1,018 mm, travel distance Z-axis: 200 mm, controller model: Windows XP, overall weight: 2,800 kg, Machine will be loaded free of charge! TECHNICAL DETAILS Operating system: Windows XP with 15" CRT color screen & Intel Celeron 2 GHz Travel paths and working areas X-axis Travel path: 2,650 mm Electric mandrel working area: 2,903 mm Horizontal drilling heads: 2 (64 mm spacing) Disc milling unit (X-direction): integrated, 4,000 rpm, 2.2 kW, Ø 120 mm Y-axis Travel path (vertical drilling area): 1,018 mm Electric mandrel working area: 1,240 mm Horizontal drilling heads: 1 Z-axis Travel path: 200 mm Panels Max. panel size (double-station machining): 1,180 mm Max. panel thickness: 180 mm Speeds X/Y travel speed: 54 m/min Travel speed Z: 11.5 m/min Milling unit (electric mandrel) Spindle type: HSK 63 Power: 7.5 kW Speed range: 1,500 – 24,000 rpm Tool holder: HSK 63, straight tool holder Tool magazine (type R8L): 8 positions Max. tool diameter: Ø 120 mm Max. tool weight per holder: 4.5 kg Max. total weight (tools + holder): 22 kg Horizontal milling unit (2 outputs) Speed range: 9,000 – 18,000 rpm Motor power: 3 kW (4 HP) Front tool: Ø 20 mm, length 110 mm Rear tool: Ø 12 mm, length 80 mm Circular saw blade: Ø 100 mm Drives and power Main spindle power: 2.2 kW (3 HP) Main spindle speed: 4,000 rpm Spindle mount: M10 EQUIPMENT - 12 vertical drilling spindles (7 in X, 5 in Y) - 4 panel support tables, each 1,000 mm long Dslswh Syxjn Ucdqeut - 2 additional universal supports, 25 mm high - 8 automatic round vacuum cups with aluminum bodies (2 per table) - 4 vacuum cup holders for contour machining - Vacuum pump with 100 m³/h capacity - Vacuum conveyor - Automatic central lubrication for X and Y axes - Pneumatic loading aids for 1,000 mm tables