Used Avant 528 Plus for sale (6,204)

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 282449/F0401938, overall weight: 800 kg, volume flow: 3.58 m³/h, operating pressure: 13 bar, pressure (max.): 13 bar, ALUP screw compressor, SCK 42-13 PLUS, Ceb Eovgrkpop D Dhjgt Motor: 30 kW, Capacity: 3.58 m3/min Bar: 13

Condition: new, Year of construction: 2024, Functionality: fully functional, overall weight: 150 kg, fuel type: diesel, tank capacity: 15 l, color: black, output current: 15 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 8.5 kW (11.56 HP), continuous power: 7.6 kW (10.33 HP), total length: 750 mm, total width: 650 mm, total height: 730 mm, motor speed: 3,000 rpm, type of cooling: air, Powerful generator Proton 3 Plus is a generator for special tasks requiring more power. The generator features more power equal to 8500W, this is thanks to the new engine and alternator, for safe operation, the frame has been reinforced. ABBREVIATION: Genset type: Three-phase Fuel type: Diesel Air-cooled: Yes Voltage: 230/400V Rated power: 400V - 7600 watts (9.5kVA) Maximum power up to 15 minutes - 8500W (10.6kVA) WEIGHT: Gross weight: 150kg FUELING: 1.7 liters per hour (at 70% of maximum power) 2.1 liters per hour (at 90% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 192FA-D0 Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 499 cc3 Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 8 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 1.7l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 190-CAVR-400 Rated current (400V) - 15.0 A Voltage - 400V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to exhaust fumes outside the facility - Yes Sound pressure level LPA - 86dB (measurement - 5m, open space) Fuel tank capacity - 15 liters Operating time on a full tank (Average) - 8 hours SOCKETS: Number of three-phase outlets - 1 piece (16A 5-pin) Number of single-phase sockets - 3 pieces (8A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 22 cm Width - 65 cm Length - 75 cm Height - 73 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric, Manual (from a cord) Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Ceb Eotrmfaop D Dhogt Current protection - 3xC16 (for 400V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Large wheels Yes - Handles RICH EQUIPMENT See below what else the kit includes: - Battery - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 100 GOLD PLUS DÖRT KÖŞE KAYNAK MAKİNESİ, - Designed for joining four corners of PVC profile corners by welding them at the same time. - It is used to weld four corners of PVC profiles at the same time at an angle of 90 degrees. - 0.2 mm welding possibility for all profile types - Quick mold change system that prevents wasted time - High speed and precision welding thanks to axes controlled by servo motors and planetary gearboxes - With the PID system, heating degree and time parameters are adjusted independently of each other - Single corner welding capability - U (door without threshold) boiling system - 10.1" touch control panel - Boiling, cooling times and temperature settings are digitally adjusted according to the profile type - The Teflon surface can be changed quickly thanks to the roll-shaped Teflon PROFILE ; - Max. weldable profile height 200 mm - Weldable Min. Profile Height 200 mm - Weldable Frame Minimum Width and length 410*495 mm, 520*520 mm (Gasket Printed) - Working angle range 90 degrees PRECISE MOVEMENT WITH SERVO MOTOR AND PLANETARY GEARBOX - Highly precise and error-free operation with axes controlled by high-speed and precise servo motors AND gearbox compatibility Csb Epercy Tre D Dhogt OPTION - Gasket pressing system

Condition: excellent (used), Year of construction: 2006, Machine in perfect condition, 100% functionaly, can be inspected during production Csb Epetuqcwj D Dhogt A lot of tools included

Year of construction: 2007, Condition: excellent (used), * Press dimensions: 2800x1500mm Cgjb Eoi Ary Dop D Dhst * 2 pc. Loading Trays equipped with the automatic pin system * Automatic Foil Cutting Device * Turn Over Device * Foil storage Paternoster * Pinsystem PLC control Siemens S7 * Restfoilpress HSM 605

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 669481, Format:32x46cm, conventional dampening, in heavily used condition, Ceb Ep Devgbaao Dhogt counter reading: 59 Mio impression cylinder with slight surface damage, see photos. Numerous additional equipment: numbering inking unit (three rubber rollers should be re-coated), perforators, cross perforators, Leibinger numbering units lengthwise and crosswise, manuals.

Condition: used, Year of construction: 2002, SECOND-HAND GUILLOTTINE GIERRE MOD. PERFETTA TYPE 32 PLUS CE RULES Cgjb Epsmxlane D Dhst - Year 2002 - S/N 000215

Condition: new, Year of construction: 2024, Functionality: fully functional, overall weight: 150 kg, fuel type: diesel, tank capacity: 15 l, color: black, output current: 46 A, output voltage: 230 V, output frequency: 50 Hz, nominal power: 8.5 kW (11.56 HP), continuous power: 7.6 kW (10.33 HP), total length: 750 mm, total width: 650 mm, total height: 730 mm, motor speed: 3,000 rpm, type of cooling: air, Reliable generator Proton 1 Plus is a generator with increased power thanks to a larger engine and alternator. To maintain proper operation, we have strengthened the entire structure of the generator. The aggregate is perfect for business and home. Cgjb Ep D Dstrmulshjt SHORT: Genset type: Single-phase Fuel type: Diesel Air-cooled: Yes Voltage: 230 V Rated power: 230 V - 7600 Watt (9.5kVA) Maximum power up to 15 minutes - 8500W (10.6kVA) WEIGHT: Gross weight: 150kg FUELING: 1.7 liters per hour (at 70% of maximum power) 2.1 liters per hour (at 90% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 192FA-D0 Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 499 cc3 Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 8 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 1.7l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 190-CAVR-230 Rated current (230V) - 46.0 A Voltage - 230V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to exhaust fumes outside the facility - Yes Sound pressure level LPA - 86dB (measurement - 5m, open space) Fuel tank capacity - 15 liters Operating time on a full tank (Average) - 8 hours SOCKETS: Number of three-phase outlets - none Number of single-phase sockets - 1 piece (32A), 2 pieces (16A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 22 cm Width - 65 cm Length - 75 cm Height - 73 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric, Manual (from a cord) Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 1xC32 (for 230V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Large wheels Yes - Handles RICH EQUIPMENT See below what else the kit includes: - Battery - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 4000 S PLUS Full Otomatik Servo Motorlu Çift Köşe Alüminyum Pvc Kesim Makinası, - It is a fully automatic controlled cutting machine designed to cut PVC and Aluminum profiles straight or angled with a double head Ø600 mm saw. - Hydro - Pneumatic Hydro - check controlled saw movement - Cutting Accuracy +/- 0.1 mm - High precision thanks to backlash-free gearbox - Automatically adjustable to two inward angles at 90 and 45 degrees - 15" Windows-based industrial PC - Diamond saw 2 x Ø600 mm - Servo motor motion system - 21.5 cm saw exit distance and 70 mm x 3 profile cutting capacity Cgoberamy Ts Ep D Dhet - Hydro-check saw speed adjustment - 9.5 meter cutting feature - 90 degree wedge slicing feature - Multi-language support - Conveyor profile support unit - Motion-sensitive support arm - Profile support unit between cutting heads - Spray saw cooling system - 2 vertical clamps - 4 horizontal clamps OPTION - Barcode printer - Cutting list transfer via USB Memory

Condition: reconditioned (used), Year of construction: 2007, machine/vehicle number: FARO-PT08, Faro gage Plus Arm 6 axis, Arm length 4ft (appx. 1,2m) Accuracy 5+8L/1000µm Last calibration 2016 incl. very new Inspect3D software Inca Premium Ceb Ep D Dspqx H Njhsgt Windows 10 PC or notebook (new) or other application (Polywork, PcDmis, MComos.) On demand we can deliver a granit plate with 1500x1000mm. Softwaretraining possible

Condition: repair required (used), Year of construction: 2000, Functionality: not functional, There are issues with PLC. Need to be rapaired. Cgsb Ep Dsvc D Dae Dhot

Condition: new, Year of construction: 2025, DPF HEATER PRO PLUS™ is a device designed for drying all types of diesel particulate filters (DPFs) and catalytic converters, made entirely of stainless steel AISI 304 and acid-resistant steel AISI 316. It is equipped with an integrated measurement system and a drying system that operates at temperatures up to 130°C using a side-channel turbine. A built-in thermal printer allows for printing contamination measurements of the filter both before and after regeneration. This device is an excellent additional option for DPF cleaning machines that do not have an integrated drying system. BENEFITS OF USING THE DPF HEATER PRO: - Operates independently of the regeneration machine - Optimizes the filter regeneration process - Low drying costs - Contamination measurement system – test results confirmed with a printout - Quick filter clamping system – Camlock Csb Ep Deglpywe Dhogt - Adapters for passenger cars and trucks - Full automation of the drying process TECHNICAL PARAMETERS: - Weight: 100 kg - External dimensions (L x W x H): 92 x 51 x 114 cm - Voltage: 3 x 400 V - Maximum power: 7.5 kW - Frequency: 50 Hz - Ambient temperature: 5 - 35°C - Airflow: up to 390 m³/h - Overpressure: up to 370 mbar - Vacuum: up to -300 mbar - Measurement system: integrated - Drying system: integrated - Hose diameter: 6/4" - Drying temperature: adjustable within 70°C - 130°C - Safety features: pressure sensor, emergency safety switch - Declaration of conformity: CE

Year of construction: 2016, Condition: used, Functionality: fully functional, Miltenyi Biotec CliniMACS Plus Magnetic cell separator 2016. The Miltenyi Biotec CliniMacs Plus Instrument P/N 44085 is a cell separation system designed for clinical-scale enrichment of target cells or depletion of unwanted cells from blood products. It automates cell separation in a sterile system, enabling the separation of target cells from unwanted cells and collecting the fractions in different bags. The system is widely applicable in regenerative medicine, adoptive immunotherapy, and graft engineering. It magnetically labels cells in the Cell Preparation Bag and separates them, providing high purity and excellent yield. With optimized protocols, the system combines reproducibility with ease of use. Specifications: Cgsb Epet E Hl Io D Dhet Dimensions: 70cm x 60cm x 90cm (w x d x h) Weight: Approximately 35 kg Input Voltage: 100-240 V~ Power Consumption: 350 W Monitor: 10.1 TFT Touchscreen Types of Starting Material: Leukapheresis, bone marrow Processing Steps: Cell depletion and enrichment via magnetic cell separation Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2024, Functionality: fully functional, overall weight: 175 kg, fuel type: diesel, tank capacity: 15 l, color: black, output current: 15 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 8.5 kW (11.56 HP), continuous power: 7.6 kW (10.33 HP), total length: 920 mm, total width: 520 mm, total height: 720 mm, motor speed: 3,000 rpm, type of cooling: air, Diesel generator set with a power output of 8.5kW. The Proton 360 Plus is characterized by Dual Power technology thanks to which the user is able to obtain 80% power on a single-phase socket and 100% power on a three-phase socket. SHORT: Genset type: DUAL, Single-phase, Three-phase Fuel type: Diesel Air-cooled: Yes Voltage: 230/400V Rated power: 400V - 7600 watts (9.5kVA) Maximum power up to 15 minutes - 8500W (10.6kVA) Rated power 230V - 6000 Watt Maximum power up to 15 minutes - 6800 watts WEIGHT: Gross weight: 175 kg COMBUSTION: 1.7 liters per hour (at 70% of maximum power) 2.1 liters per hour (at 90% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 192FA-D0 Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 499 cc3 Cgeb Epetrl D De D Dhot Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 6 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 1.7l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 190-CAVR-D Rated current (400V) - 15.0 A Voltage - 230/400V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Type of housing - Enclosed - Silenced Ability to discharge exhaust fumes outside the facility - Yes Sound pressure level LPA - 72dB (measurement - 5m, open space) Fuel tank capacity - 15 liters Operating time on a full tank (Average) - 8 hours SOCKETS: Number of three-phase outlets - 1 piece (16A 5-pin) Number of single-phase sockets - 1 piece (32A), 2 pieces (16A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 10 cm Width - 52 cm Length - 92 cm Height - 72 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 3xC16 (for 400V), 1xC32 (for 230V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Small wheels Yes - Handrails on two sides RICH EQUIPMENT See below what else the kit includes: - Battery - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: new, Year of construction: 2024, total width: 2,400 mm, total height: 18,000 mm, total length: 3,000 mm, warranty duration: 12 months, overall weight: 700 kg, power: 1 kW (1.36 HP), Automatic Machine for Wooden Pallets PT 1000 Plus Polish Manufacturer. The device is 100% New. CN Nailers for coil nails are used in the Nailing Machine. Description of the device : The nailer consists of one working table. The pallet after nailing remains on the other side of the machine which allows for easy attachment of the Forest PT 16 stacker . This arrangement allows 100% utilization of the machine. Cgsbem E Np Uo Ep D Dhot Possibility of nailing the pallets: Top on 5 boards +3spaces Top on 6 boards +3spaces Top on 7 boards +3spaces Top on 9 boards +3spaces Pallets on skids Possibility of nailing the pallets in dimensions max 1200x 1200mm min 600x600mm -Dimensions L 3000cm width 2400cm height 1800cm -Quick adjustment of changing the size of the pallet height automatically adjusts itself boards do not need to be perfectly equal in thickness. -Easy to use any setting with the choice of nail hammering and the number of nails hammered in. -Number of nailers in standard 8pcs possibility to install up to 12pcs

Condition: new, Year of construction: 2023, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Cutting Area: 4000*2000mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING Cgjb Ep Dohv U Sze Dhot

Condition: new, Year of construction: 2025, total width: 2,100 mm, total length: 1,260 mm, total height: 2,150 mm, A high-quality device for the regeneration of DPF/FAP/GPF/SCR/EURO 5/EURO 6 filters and catalytic converters. Constructed entirely from stainless steel (AISI 304) and acid-resistant steel (AISI 316), suitable for all types of vehicles. The machine is equipped with a 275-liter tank, a high-pressure pump with a capacity up to 250 l/min, and an integrated filter drying system. The Master Flash technology utilizes the full benefits of the hydrodynamic method, restoring filter efficiency up to 99.9% compared to the new one. It is completely safe for the monolithic structure of DPF filters. Properly adjusted parameters ensure that PM10, PM2.5 particles, soot, carbon deposits, oil, cerium oxides, and heavy metals are thoroughly removed, maintaining the filter's factory characteristics. The pump with chemical sealing and electronics based on components from leading European manufacturers guarantee the highest quality and reliability. The machine is equipped with a filter contamination measurement system (backpressure measurement) and an integrated filter drying system with a temperature range of 70 to 130 degrees Celsius. The filtration system, expanded with a pre-cleaning filter, significantly extends the lifespan of the main filters. Master Flash technology, combined with the unique XPOWER DPF CLEANER chemistry, effectively removes PM10, PM2.5 particles, carbon deposits, oil, cerium, and heavy metals without mechanical interference with the filter structure, restoring its factory performance to 99.9%. TECHNICAL SPECIFICATIONS: * Weight: 650 kg * External dimensions (H x W x D): 215 x 210 x 126 cm * Chamber dimensions (H x W x D): 107 x 140 x 89 cm * Tank capacity: 275 l * Operating pressure: 6 - 8 bar (90 - 100 psi) * Voltage: 3 x 400V * Max power: 12 kW * Frequency: 50 Hz * Water inlet connection: 1/2” * Water outlet connection: 6/4” * Air connection: pneumatic quick coupling DN 7.2, plug * Ambient temperature: 5 - 35°C EQUIPMENT: • High-quality components Ceb Ep Dogllkao Dhsgt • 7” color touchscreen • Sensors: liquid level, liquid and air temperature, pressure flow, door opening, phase loss, and phase sequence • Filter contamination measurement system • Chamber made of stainless steel AISI 316 • Extended 4-stage liquid filtration system • Two heaters • Integrated drying system with a temperature range from 70 to 130°C • Drying system cooling • Integrated thermal printer for filter parameter printouts • Ethernet controller for remote diagnostics • Set of connection adapters for DPF/FAP/GPF/CAT/SCR filters • EURO5 and EURO6 adapter • Starter kit of consumables (complete set of filters + 2L XPOWER DPF Cleaner detergent) • Extended 12-month manufacturer warranty (optional 24 or 36 months) AVAILABLE IN VARIOUS CONFIGURATIONS - CONTACT US FOR MORE INFORMATION.

Year of construction: 2020, Condition: used, Functionality: fully functional, Miltenyi Biotec CliniMACS Plus Magnetic cell separator 2020. The user-friendly key components of the CliniMACS Plus Instrument offer sophisticated applications for a whole variety of separations. The selected stem cells, monocytes, DCs, NK cells, B cells, and T cell subsets allow research in the field of regenerative medicine, adoptive immunotherapy, and graft engineering. Cells are magnetically labeled in the Cell Preparation Bag using an antigen-specific reagent. Subsequently, the Cell Preparation Bag is connected to the CliniMACS Plus Instrument. Intuitive software facilitates target cell enrichment or depletion as well as final collection in the Cell Collection Bag. The CliniMACS System separates large numbers of cells providing target cells with high purity and excellent yield. Electrical: 100-240V, 50/60Hz, 4 Amps, 350VA Cgsb Eet E Hmrep D Dhst Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2024, Functionality: fully functional, overall weight: 150 kg, fuel type: diesel, tank capacity: 15 l, color: black, output current: 15 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 8.5 kW (11.56 HP), continuous power: 7.6 kW (10.33 HP), total length: 750 mm, total width: 650 mm, total height: 730 mm, motor speed: 3,000 rpm, type of cooling: air, Diesel generator set with a power output of 8.5kW. The Proton 360 Plus is characterized by Dual Power technology thanks to which the user is able to obtain 80% power on a single-phase socket and 100% power on a three-phase socket. SHORT: Genset type: DUAL, Single-phase, Three-phase Fuel type: Diesel Air-cooled: Yes Voltage: 230/400V Rated power: 400V - 7600 watts (9.5kVA) Maximum power up to 15 minutes - 8500W (10.6kVA) Rated power 230V - 6000 Watt Maximum power up to 15 minutes - 6800 watts WEIGHT: Gross weight: 150 kg COMBUSTION: 1.7 liters per hour (at 70% of maximum power) 2.1 liters per hour (at 90% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 192FA-D0 Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 499 cc3 Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 8 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 1.7l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 190-CAVR-D Cgob Ep Dstrl A Ao Dhot Rated current (400V) - 15.0 A Voltage - 230/400V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to exhaust fumes outside the facility - Yes Sound pressure level LPA - 86dB (measurement - 5m, open space) Fuel tank capacity - 15 liters Operating time on a full tank (Average) - 8 hours SOCKETS: Number of three-phase outlets - 1 piece (16A 5-pin) Number of single-phase sockets - 1 piece (32A), 2 pieces (16A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 22 cm Width - 65 cm Length - 75 cm Height - 73 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 3xC16 (for 400V), 1xC32 (for 230V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Large wheels Yes - Handles RICH EQUIPMENT See below what else the kit includes: - Battery - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: used, Functionality: fully functional, HP Designjet 1050c Plus Printer The HP Designjet 1050c plus is a wide format printer designed for CAD and technical offices Csb Ep D Dsrzbq Ijhjgt HP DesignJet 1050c 36” Wide Large Format High speed printer using thermal Inkjet technology. Good working condition. Please check out our other listings as well.

Year of construction: 2016, Condition: like new (used), The user-friendly key components of the CliniMACS Plus Instrument offer sophisticated applications for a whole variety of separations. The selected stem cells, monocytes, DCs, NK cells, B cells, and T cell subsets allow research in the field of regenerative medicine, adoptive immunotherapy, and graft engineering. Cgebjiptzfe Ep D Dhjt Full system control by means of an integrated microcomputer Automatized cell separation by a magnetic separation unit including both a movable permanent magnet and a holder for the separation column A peristaltic pump to ensure continuity in flow rates throughout the tubing set Various pinch valves to support the peristaltic pump in managing the correct flow of buffer and cell suspension Cells are magnetically labeled in the Cell Preparation Bag using an antigen-specific reagent. Subsequently, the Cell Preparation Bag is connected to the CliniMACS Plus Instrument. Consumer-friendly software facilitates target cell enrichment or depletion as well as final collection in the Cell Collection Bag. The CliniMACS System separates large numbers of cells providing target cells with high purity and excellent yield. Good working condition. Please check out our other listings as well.

Condition: good (used), Functionality: fully functional, We have two units in stock. Price is for one unit only. Ecom Oil-free compressor DK50 Plus. 230 V. 50/60 Hz. 550 W. Delivery quantity: 75 L / min / 5bar. Pressure vessel 25 L. Working pressure 6-8 bar. Cjb Ep Djq Hfcko Dhegt Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 12075, WITH BASE CABINET Book format: 320 x 220 mm (Max. 320 x 300 mm) Cover format: Cover size: 330 x 480 mm (Max. 330 x 680 mm) Cjb Ep Djup A Dnj Dhjgt Book thickness: 2 - 50 mm Cycle speed: up to 300 cycles per hour Heat-up time: 30 - 40 minutes Equipment / Additional information: Adhesive: Planamelt R 1323-2

Condition: used, Year of construction: 2012, operating hours: 781 h, Selling a well-maintained and technically inspected wheel loader with a high-dump bucket. The smallest Avant model can drive through doorways and is also ideal for use in the house, yard, and garden. Cgsb Eswdc Ifjp D Dhot

Condition: excellent (used), Year of construction: 2014, operating hours: 2,478 h, Functionality: fully functional, On offer is a vacuum filler Handtmann VF-608 Plus.Bj.2014 400v.3,0Kw. the machine is completely V2A in a very good condition fully functional ready for immediate use. Dimensions: 70x80x180cm. Csb Ep Derwx Iws Dhogt On request also with holding device or Lengs portioner, costs extra please ask. More on request. Cash or prepayment! Sale only to traders, no guarantee, no warranty.