AHL storage tank 80.000 liter liquid fertilizer

Year of construction

1999

Condition

Used

Location

Warstein

AHL storage tank 80.000 liter liquid fertilizer

Machine data

Machine type:: AHL storage tank 80.000 liter liquid fertilizer

Year of construction:: 1999

Condition:: good (used)

Price & Location

Location:: Enkerbruch 2, 59581 Warstein, Deutschland

Call

Details about the offer

Listing ID:: A299-0870

Update:: 23.05.2024

Description

Tank & Environmental Protection Wozniack – certified specialist company in accordance with the Water Resources Act.

Dear Sir or Madam,

We offer an 80,000-liter double-walled storage tank for storing liquid fertilizers as follows:

The storage tank is equipped with a brand-new, internal plastic liner, which is resistant to the storage of liquid fertilizers.
An acoustic leak warning device is mounted externally in a protective box (lockable).
The storage tank also has a double-walled steel construction.

The plastic inner liner has a general building inspection approval.
It is therefore suitable and approved for storing liquid fertilizers AHL as well as NOX reduction agents AUS32 (AdBlue).

Nominal capacity: 80 cubic meters
Quantity: 1
Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted.
Color: Paint RAL. However, you can also specify your own desired colors at any time.
Material: Steel in steel, material S235JRG2
Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate.
Quantity: 1 dipstick
Quantity: 1 vent fitting
Quantity: 1 filling nozzle, 3 inches, V2A stainless steel, newly installed
Quantity: 1 new acoustic leak warning device for the double wall
Quantity: 1 ladder
Quantity: 1 suction line, 3 inches, V2A stainless steel, newly installed
Shape: Cylindrical storage container with feet/console

Container dimensions:
Length: approx. 12,780 mm
Diameter: approx. 2,900 mm
Weight: approx. 14,000 kg
Storage: Above ground

Nsdpec Nk E Asfx Ah Secu
Excellent offer! Liquid fertilizer – AHL tank systems in sizes from 5,000 to 100,000 liters.
Water tanks, fire water tanks.

Of course, you can also participate in the design of your tank system!

All our systems are thoroughly inspected and checked by selected employees in our company.

We also offer cost-effective delivery on request.

Inspection of our systems is possible at any time.
Further tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises.

Have we convinced you of our offer?

If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you.

Price/Shipping

The price for the tank system applies ex works Warstein, free of charge for loading.
Delivery can be offered at a reasonable cost for an additional fee.
Delivery time: Immediate

You will receive an invoice with VAT shown.

In addition, we purchase existing tank systems and, as a certified specialist company in accordance with the Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove them.

Sincerely,

Tank & Environmental Protection Wozniack
Enkerbruch 2
59581 Warstein

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2015

35 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

Drilling and milling center Format4 c-express 920 classic

Rheinland-Pfalz

7,808 km

Drilling and milling center
Format4c-express 920 classic

€10,000

To the auction

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 351.10.001.16, functionality: fully functional, workpiece length (max.): 3,000 mm, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, drilling depth: 55 mm, TECHNICAL DETAILS Maximum horizontal drilling depth: 30 mm Maximum vertical drilling depth: 55 mm Horizontal spindles: 6 Vertical spindles: 9 Spacing between horizontal spindles: 32 mm Spacing between vertical spindles: 32 mm Maximum diameter of horizontal spindles: 15 mm Ncedpfezcdkwex Ah Seu Maximum diameter of vertical spindles: 8 x 15 mm, 1 x 35 mm Workpiece dimensions, X-axis: 280 - 3,000 mm Workpiece dimensions, Y-axis: 180 - 920 mm Workpiece dimensions, Z-axis: 10 - 50 mm Speed, X-axis: 25 m/min Speed, Y-axis: 25 m/min Speed, Z-axis: 15 m/min Motor power, drilling head: 1.5 kW Speed, drilling head: 3,600 rpm Speed, circular saw unit: 9,000 rpm Speed, milling spindle: 24,000 rpm Diameter of circular saw blade: max. 100 mm MACHINE DETAILS Operating/ambient temperature: 15–40 °C Humidity: max. 90 % at 20 °C Operating pressure: 6–8 bar Nominal compressed air consumption: 60 l/min Air consumption: 1,650 m³/h Diameter of compressed air supply: 5/8" Inner diameter: 16 mm Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,605 x 1,950 mm Weight: 850 kg Operating hours (estimated): approx. 800 h EQUIPMENT Additional support roller tables

See details

Auction

Rheinland-Pfalz

7,757 km

Vertical machining center
TakumiV18A

€8,500

To the auction

Condition: ready for operation (used), Year of construction: 1998, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: J0124, travel distance X-axis: 1,800 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain iTNC 426, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,800 mm Travel range Y-axis: 850 mm Travel range Z-axis: 750 mm Spindle nose to table distance range: 200 mm - 950 mm Njdpfxszdpqws Ah Sscu Spindle center to column distance: 920 mm Table dimensions X: 2,000 mm Table dimensions Y: 800 mm Max. table load: 2,200 kg Tool interface: SK50 Magazine capacity: 30 Spindle speed: 6,000 rpm Feed rate: 5 m/min Rapid traverse: 12 m/min MACHINE DETAILS Control system: Heidenhain iTNC 426 Dimensions & Weight Dimensions (L x W x H): approx. 5,700 x 3,850 x 3,350 mm Weight: approx. 16,500 kg Operating Hours Total operating hours: approx. 51,000 h Spindle operating hours: approx. 26,000 h EQUIPMENT 4th axis installed as a rotary table Documentation/Manual Spindle speed infinitely adjustable Chip conveyor Coolant system Vices

See details

Auction

Hessen

7,806 km

Press brake
BoschertProfi 28 CNC

€5,000

To the auction

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Ncedpfxjzdd Rgo Ah Seu Travel range of the back gauge: 0 - 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing speed: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping system (top)

See details

Auction

Scribing and dot peen marking machine / Engraving machine Nill + Ritz TSM 15-10-UG

Hessen

7,806 km

Scribing and dot peen marking machine / Engraving machine
Nill + RitzTSM 15-10-UG

€2,500

To the auction

Condition: ready for operation (used), Year of construction: 2012, controller model: NR4000.2.1 IPC, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Engraving area, X-axis: 100 mm Engraving area, Y-axis: 150 mm Nsdpjzddzrjfx Ah Sjcu CNC engraving and embossing machine – TSM series Type: TSM 15-10-UG Year of manufacture: 2012 Control system type: NR4000.2.1 IPC EQUIPMENT Operating manual available Documentation and software available

See details

Auction

Hessen

7,806 km

Engraving machine
RichterPGM 500

€2,000

To the auction

Condition: defective spare-parts repository (used), Year of construction: 2020, spindle speed (max.): 18,000 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 150 mm, table load: 20 kg, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was 39,875 EUR! TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 150 mm Dimensions of the T-slot table (L x W): 700 x 570 mm Maximum table load: 20 kg HFS spindle power: 80 W HFS spindle speed: 60,000 rpm Motion Rapid traverse: 100 mm/s Repeatability: 0.01 mm Tool holder: 6 mm MACHINE DETAILS Electrical connection: 240 V Software: Signumeric EQUIPMENT Bellows covers Energy guide chains Jäger engraving spindle 42-2 W27 FS incl. frequency converter Reinforced base frame Ncodpfx Ahozddwme Ssu Heat dissipation via spindle carrier 2 m cable outlet Quick-change system for on-site electric engraver Documentation and software available Note: without monitor and without PCA control module (engraving computer)

See details

Auction

Endogas generator Hammer GmbH Larus Endogas Generator

Hessen

7,806 km

Endogas generator
Hammer GmbHLarus Endogas Generator

€10,000

To the auction

Year of construction: 2018, condition: ready for operation (used), operating temperature: 950 °C, ambient temperature (max.): 70 °C, nominal flow rate: 40 m³/h, overpressure (max.): 0.2 bar, machine/vehicle number: 220173941, TECHNICAL DETAILS Maximum overpressure in the pipes: 0.2 bar Nedpozddb Ejfx Ah Secu Maximum operating temperature in the pipes: 950°C Maximum ambient temperature: 70°C Pipe volume: 40 l EQUIPMENT Dew point or cp control Soot filter in duplex version Fully automatic power control in the range of 50-100%

See details

Auction

Cylindrical grinding machine Kellenberger KEL-VISION

Baden-Württemberg

7,969 km

Cylindrical grinding machine
KellenbergerKEL-VISION

€25,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665100, overall weight: 4,700 kg, center height: 125 mm, Round grinding machine with robot! TECHNICAL DETAILS Center height: 125 mm MACHINE DETAILS Control: Fanuc 18i-T Total weight: 4,700 kg Operating hours Automatic cycle time (according to diagram): 41,411 h Feed time (according to diagram): 14,251 h Ncsdpszcwfuefx Ah Sju EQUIPMENT Universal Robots UR5 robot Standard accessories 1 grinding wheel set, right-hand, 500 x 110 x 203.2 mm 1 manual swivel chuck for turning parts with manual indexing every 2.5 degrees Automatic balancing device MARPOSS type E 82 Hydraulic quill retraction for the tailstock Stroke monitoring for the tailstock Standard workpiece spindle MK 5 DIN 55026 size 5”

See details

Auction

Cylindrical grinding machine KELLENBERGER 1000 U

Baden-Württemberg

7,969 km

Cylindrical grinding machine
KELLENBERGER1000 U

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 32.469.3143, center height: 125 mm, grinding length: 1,000 mm, The machine underwent a partial overhaul in 2009. TECHNICAL DETAILS Maximum height: 125 mm Maximum width: 1,000 mm EQUIPMENT Automatic working cycle Intermediate plates 50 mm for a maximum height of 175 mm Vibration-damping pads Machine light Internal grinding device for a maximum diameter of 70 mm Internal grinding spindle UJ7P Coolant supply through the workpiece spindle, including protective cover Side and angled dressing device Swiveling dressing device for internal grinding Ncsdozcwfnopfx Ah Ssu Dressing stop for internal grinding Collet chuck Set of collets Dial indicator stop for table swiveling with a 1/100 mm dial indicator Sine bar Table fixed stop Strip-type filter system SONY digital measuring system, 2 axes Documentation

See details

Auction

Rheinland-Pfalz

7,830 km

Vertical machining center
HAASVF-7/40

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range, X-axis: 2,134 mm Travel range, Y-axis: 813 mm Travel range, Z-axis: 762 mm Max. spindle speed: 8,100 rpm Spindle motor power: 22.4 kW Max. torque: 122.0 Nm at 2,000 rpm Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg Number of tool magazine slots: 31 Distance from spindle nose to machine table (max.): 864 mm Distance from spindle nose to table (min.): 102 mm MACHINE DETAILS Control system: HAAS Table dimensions: 2,134 x 711 mm Njdezg Drzjpfx Ah Secu Max. load capacity on table: 1,814 kg EQUIPMENT Documentation/Manual Chip conveyor

See details

Auction

Travelling column milling machine ANAYAK HVM 3300

Rheinland-Pfalz

7,830 km

Travelling column milling machine
ANAYAKHVM 3300

€25,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 3,000 rpm, controller model: HEIDENHAIN iTNC530, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range X-axis: 2,700 mm Travel range Y-axis: 1,000 mm Travel range Z-axis: 1,050 mm Max. feed rate X/Y/Z: 10,000 mm/min Table dimensions: 3,300 x 1,000 mm Nodezg Dq Depfx Ah Secu T-slots: 7 x 22 2-axis diagonal milling head: 1 x 2.5 Spindle speed: 60 - 3,000 rpm Motor power: 22/30 kW Tool holder: ISO 50 (DIN69872-B) MACHINE DETAILS Control system: HEIDENHAIN iTNC530 Coolant pressure through the spindle: 19 bar EQUIPMENT Adjustable control panel in front of the machine Enclosure with front-facing doors Machine documentation Cooling and chip disposal Chain conveyor in the longitudinal direction

See details

Advertise here