Diesel Tank Tank conditioning filling station

Year of construction

2011

Condition

Ex-display machine

Location

Germany

Diesel Tank Tank conditioning filling station

Basic data

Machine type:: Diesel Tank Tank conditioning filling station

Machine number:: 10.000 Ltr

Year of construction:: 2011

Condition:: as good as new (ex-display)

Price & Location

Location:: D - Nordrhein-Westfalen

Call

Details about the offer

Listing ID:: A242-1820

Update:: 19.05.2026

Description

Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act

Dear Sir or Madam,

We offer a 10,000-liter double-walled storage tank for diesel storage with the following specifications:

Nominal capacity: 10 cbm
Quantity: 1
Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted.
Color: Paint RAL... as per your request.
Material: Steel in steel, material S235JRG2
Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate.

Shape: Cylindrical, lying horizontally on 2 welded saddle supports (ground clearance approx. 100 mm).

Monitoring space of the double wall with leak detection fluid.

Container dimensions:
Length: approx. 5,350 mm plus 600 mm for diesel pump
Diameter: approx. 1,600 mm
Weight: approx. 2,000 kg

Equipment/fittings: Manway 500 mm with manway cover, screws, and gasket.
- Filling pipe 2“ with TW valve (filling cap) (from 20 m³ = 3“)
- Suction pipe 1¼“
- Dipstick and dipstick closure – tank level indicator
- Vent pipe with cap 1 ½“
- Limit value sensor with type approval
- Leak detection device (optical) = LAS with leak detection fluid
- Access ladder for side mounting, supplied separately.

Tank approved for installation outside of earthquake/flood zones.

Diesel fuel dispenser with data recording
Type: HDM80eco LTE
Flow rate: 75 l/min
Cloud-based basic module free of charge
You can see who, when, where, and how much fuel was dispensed.
Fueling is done via tank key or PIN input.

Dispensing area/fueling station
Type: KAP system, galvanized
Area with ramps (mm): approx. 2,650 x 5,300
Area without ramps (mm): approx. 2,500 x 5,000
Pan height (mm): approx. 60
- Nationwide general building approval
- Approved for installation outdoors and in buildings
(For outdoor installation with folding cover and passing pipes)
- 2 collection basins, each with a volume of 150 liters.
Dcodpfx Aqocl Sb Reten

=====

Top offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters.

Of course, you can also participate in the design of your tank system!

All our systems are thoroughly inspected and checked by selected employees at our company.
We also offer affordable delivery upon request.
You can inspect our systems at any time.
Further tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises.
Have we convinced you of our offer?
If you have any questions or requests, please call us, one of our experienced employees will be happy to advise you.

Price/Shipping

The price for the fuel station applies ex works Warstein, unloaded.
Delivery can be offered at a low cost for an additional charge.
Delivery time: upon agreement.
You will receive an invoice with VAT shown.

In addition, we purchase existing tank systems and can, as a certified specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and remove them.

Sincerely,
from Warstein
Tank & Environmental Protection Wozniack

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2015

35 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

Nordrhein-Westfalen

7,588 km

Press brake
TRUMPFTruBend 5085

€9,850

To the auction

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, operating hours: 23,390 h, pressing force: 85 t, overall weight: 8,600 kg, controller model: TASC 6000, operating pressure: 300 bar, TECHNICAL DETAILS Pressing force: 85 t Pressing force: 850 kN Operating pressure: 300 bar MACHINE DETAILS Control system: TASC 6000 Control voltage: 24 V Dsdpfsz Hxtdex Aqtocn Follow-up time: 95 ms Follow-up distance at 220 mm/s: 10 mm Follow-up distance at 160 mm/s: 8.5 mm Safety distance: 190 mm Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Compressed air connection: 6 bar Dimensions & Weight Dimensions (L × W × H): 2,500 × 1,500 × 2,000 mm Machine weight: 8,600 kg Operating hours, hydraulics: 23,390 h

See details

Auction

Nordrhein-Westfalen

7,733 km

Press brake
TRUMPFTrumaBend V850

€9,500

To the auction

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, pressing force: 86 t, stroke length: 215 mm, overall weight: 7,300 kg, TECHNICAL DETAILS Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Follow-up time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm MACHINE DETAILS Dcodpfxoz Hvgze Aqtjn Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V DC Compressed air connection: 6 bar Weight of the press: 7,300 kg

See details

Auction

Mobile work platform Socage ForSte 37DJ Speed

Bayern

8,175 km

Mobile work platform
SocageForSte 37DJ Speed

€99,000

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 800 h, load capacity: 300 kg, arm reach: 21,000 mm, working height: 37,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 37 m Lateral reach: 21 m MACHINE DETAILS Self-weight: 18 t Load capacity: 300 kg Operating hours: approx. 800 h Mileage: approx. 5,000 km EQUIPMENT Vertical H+H stabilizers with additional lifting capability SPEED version with automatic stabilization at the touch of a button Proportional electro-hydraulic control with speed adjustment for all movements Boom/cabin protection device Manual emergency pump Emergency stop button Automatic stabilization Dcjdsz Hz Hgjpfx Aqton Load moment limiter for double safety Automatic stabilization control from the basket and from the ground Internally routed cables for protection Safety bypass Maintenance and repair history: complete, including inspection records

See details

Auction

Bayern

8,175 km

Mobile work platform
SocageForSte 16A

€32,000

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 766 h, load capacity: 500 kg, arm reach: 7,500 mm, working height: 15,900 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 15.90 m Lateral reach: 7.50 m Basket rotation: 90° + 90° Dimensions of aluminum basket: 1,200 × 700 × 1,100 mm Power outlet in the basket: 230 V Power outlet in the basket: 12 V Turret rotation: 700° Number of base plates: 4 MACHINE DETAILS Payload: approx. 500 kg Dcedpfx Aqez Hz D Sston Carrier vehicle: Piaggio Porter Operating hours: 766 h EQUIPMENT Hydraulic basket rotation Front basket mounting Pipes and cables installed in the boom Automatic closing of the boom section Automatic stabilization Lateral outriggers H + H with extra lift Automatic stabilization control from the basket and from the ground Proportional electro-hydraulic control with speed regulation of all movements Automatic engine speed regulation Possibility of simultaneous operation Display for centering the boom section in the basket Electronic CAN-BUS management system Powder-coated cataphoresis treatment Coming-home function Outline lighting for boom and turret Socage Connect Painting of boom and column parts in white, RAL 9016 Frame painting in black, RAL 9005 Painting of head and hydraulic cylinder in blue, RAL 5015

See details

Auction

Jig boring machine WMW MIKROMAT CBKoZ 1400x2240/2

Hessen

7,867 km

Jig boring machine
WMW MIKROMATCBKoZ 1400x2240/2

€6,000

To the auction

Condition: used, Year of construction: 1989, table length: 2,240 mm, table width: 1,400 mm, workpiece weight (max.): 5,000 kg, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time, no later than October 31, 2026! TECHNICAL DETAILS Longitudinal adjustment of the table (X-axis): 2,000 mm Transverse adjustment of the intermediate slide (Y-axis): 1,600 mm (1,500 mm) Vertical adjustment of the crossbeam (W-axis): 900 mm Adjustment of the drilling spindle (Z-axis): 400 mm Distance between the table clamping surface and the spindle head: min. 100 mm Distance between the table clamping surface and the spindle head: max. 1,400 mm Passage between the columns: 1,600 mm Workpiece weight max.: 5,000 kg Tool holder: SK 50 Table Width of the clamping surface: 1,400 mm Length of the clamping surface: 2,240 mm Clamping surface: 3.14 m² Number of T-slots: 9 T-slot width: 22 H7 mm Distance between T-slots: 160 mm Adjustment speeds Axis X: 0.1–4,000 mm/min Axis Y: 0.1–4,000 mm/min Axis Z: 0.1–4,000 mm/min Difference between adjacent feeds: 0.1 mm/min Rapid traverse speeds Axis X: 12,000 mm/min Axis Y: 12,000 mm/min Axis Z: 8,000 mm/min Axis ZW: 1,600 mm/min MACHINE DETAILS Control system: Siemens 840D Dimensions & Weight Space requirement (L × W × H): 7,000 × 6,500 × 5,300 mm Weight: 22,500 kg EQUIPMENT Comprehensive documentation All fluids will be drained before collection. Data backup has been saved to a USB drive. A 10-ton bridge crane is available on-site to assist with disassembly and loading. A forklift can be used if arranged in advance. Dodpfoz Hvyzox Aqtocn

See details

Auction

CNC Turning- and Milling Center BOLEY BE 42

Baden-Württemberg

7,925 km

CNC Turning- and Milling Center
BOLEYBE 42

€6,000

To the auction

Condition: used, Year of construction: 2007, operating hours: 21,999 h, turning length: 170 mm, turning diameter: 140 mm, spindle speed (max.): 8,000 rpm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Turning diameter: 42 / 140 mm Turning length: 170 mm Dodpsz Ia Rgjfx Aqtscn Spindle speed: 80–8,000 rpm C-axis: 0.001° Number of turrets: 2 Tool positions per turret: 12 Tool holder: VDI 20 Spindle speed for driven tools: 45–4,500 rpm Sub-spindle distance: 42 mm Spindle power: 1 kW Spindle speed: 60–6,000 rpm C-axis: 0.001° MACHINE DETAILS Control system: Mitsubishi Meldas Number of controlled axes: 8 Simultaneously machinable axes: 7 Collet chuck: 48 DIN 6343 Dimensions & Weight Footprint: approx. 2.4 × 1.6 × 2.2 m Machine weight: approx. 3.3 t Operating hours: 21,999 h EQUIPMENT Various tool holders, see images 5 axial driven tool holders Collet chuck for pressure collets, type 173E 15 pressure collets, type 173E Additional coolant cooler Chip conveyor Knoll, year of manufacture 2018 Simultaneous operation with 7 axes on main and sub-spindle Note: Complete battery replacement on 22.12.2025

See details

Auction

Universal machining center Deckel Maho DMC 80 FD hi-dy

Bayern

8,024 km

Universal machining center
Deckel MahoDMC 80 FD hi-dy

€19,000

To the auction

Condition: ready for operation (used), Year of construction: 2000, operating hours: 28,027 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Vertical machining center with a virtually new spindle (the machine received a new spindle after 23,919 operating hours)! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Travel in Z-axis: 600 mm Spindle Spindle speed: 18,000 rpm Tool holder: HSK 63 Dodpfx Aqoz Hu Sistocn MACHINE DETAILS Internal coolant supply: 40 bar Control system Control system manufacturer: Heidenhain Control system model: Mill Plus Spindle operating hours: 28,027 h Spindle replacement at: 23,919 h EQUIPMENT NC rotary table with C-axis NC swiveling head FD function (free-form machining) Pallet changer Infrared measuring probe for workpiece measurement Additional magazine with 120 positions

See details

Auction

Województwo wielkopolskie

8,192 km

LPG Forklifts
LindeH 30T-01

€4,000

To the auction

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X393Z00745, Year of construction: 2009, operating hours: 32,592 h, load capacity: 3,000 kg, lifting height: 5,900 mm, free lift: 1,874 mm, fuel type: gas, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,900 mm Free lift: 1,874 mm Overall height: 2,641 mm Load capacity: 3,000 kg MACHINE DETAILS Mast type: Triplex ISO class: ISO Class 3 = 2,500–4,999 kg Unladen weight: 4,925 kg Operating hours: 32,592 h EQUIPMENT 3rd valve 4th valve Heater Full cabin Dodpfx Aqjz I I I Hjtscn External reference: SL16126SLO

See details

Auction

Województwo wielkopolskie

8,192 km

Teleskopmastbühne
HaulotteSTAR 10-1

€4,000

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 836 h, machine/vehicle number: ME108831, load capacity: 200 kg, fuel type: electric, working height: 10,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 200 kg Working height: 10,000 mm MACHINE DETAILS Drive type: Electric Dedez I I Iajpfx Aqtjcn Weight: 2,735 kg Rated power: 1.2 kW Operating hours: 836 h External reference: SL16147SP

See details

Auction

Województwo wielkopolskie

8,192 km

Teleskopmastbühne
JLGToucan 8E

€4,000

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 353 h, machine/vehicle number: A3000082409, load capacity: 230 kg, fuel type: electric, drive type: Elektro, working height: 8,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 230 kg Working height: 8,000 mm MACHINE DETAILS Drive type: Electric Djdpez I Iqnjfx Aqtocn Operating hours: 353 h External reference: SL16561

See details

Advertise here