Sell machines Sell
Watch list (0) Login
Menu
  2. Filling technology
  3. Other filling machinery
  4. Listing ID: A223-46657
Home Page Filling technology Other filling machinery Listing ID: A223-46657

Line 4 Filling Line

Condition
Used
Location
Askeaton Ireland
Line 4 Filling Line
Line 4 Filling Line
Line 4 Filling Line

Machine data

Machine type:
Line 4 Filling Line
Condition:
used

Price & Location

Auction start:
16.07.2026 at 13:20 o'clock
Auction end:
28.07.2026 at 11:00 o'clock
Location:
Askeaton, Co. Limerick, Ireland Ireland
Call

Details about the offer

Listing ID:
A223-46657
Update:
16.07.2026

Description

Line 4 Can Filling LIne
130 cans/min capacity
900g can weight
127mm can diameter

comprising:
Cap UV system with 3 Rittal Heraeus P6062.30S UV lamp units
Cap inverter
UV tunnel and conveyors
Motorised Scoop Hopper with swan-neck conveyor
Fully automated scoop sorting line with 2 Aylesbury Automation Euro 630 bowl feeders
Isoma empty can rinser/ inverter S/N P160/CRL4. YOM 2016 Jorgensen fully automated depalletizing system
Accusort AL5010 4 head Barcode reader with associated conveyor and controls
Heraues H4087 Twin Lamp empty can UV tunnel
Del Packaging BLE-35 motorised incline conveyor
Del Packaging RF-6200 rotary capper feeder with integral UV tunnel
Amberflex Spiralveyor SV spiral conveyor (2015)
Thermo Scientific Ramsey Versaweigh checkweigher (2018)
Domino case labeller with stand
Oryx Automation CMWAP50 fully automated case packing machine
Mettler Toledo Garvens XS3 automatic checkweigher with reject system and table
Accusort AL5010 4 head barcode reader (2007)
Del Packaging IPCN401-502 capper with cap detection (1993)
Sleever International fully automated sleever
Domino D620i twin head laser coding machine
CSW Mini Multifeeder wide/54-MMFwide -01 can end feed system (2011)
Heraues H4087 twin lamp full can UV tunnel
Jorgensen 94302A outfeed can cleaner (2003)
Dylog DYXIM D pass through X Ray machine (2015)
Del Packaging CLPS scoop docking and over capping machine with scoop in cap detector system
Shibuya Hoppmann scoop dropper feed and place system
Shibuya Hoppmann Scoop dropper feed and place system with hopper
JBT International 16 head rotary filler with 2 Mettler Toledo C Series checkweighers
Isoma De-Eevator 01 can De-Elavator (2020)
Heraues H4087 4 lamp top and bottom side UV tunnel
Terlet 4 chamber vacuum and gassing system (1993)

Please note : the following machines have been removed
Angelus 56P can seamer (2007)
Angelus can seamer

Line 4 complete comprising items EU575759 to EU575790

Please note, this lot 30466-348 is offered for sale as a complete line.
Its components are simultaneously offered as individual lots 30466-349 to 30466-374
Bidders can bid on the complete line and/or on individual lots.
Sales are conditional subject to seller approval.
Ppedezl T Sbepfx Agmsw
It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots.
Successful bidders will be notified within 2 working days.

Seller

Registered since: 2020

44 listings online

Trustseal icon

Telephone & Fax

+44 20 38... show
These listings may also fit your interest.
Auction
Machining center Rapid MFC EVOLUTION II
Machining center Rapid MFC EVOLUTION II
Machining center Rapid MFC EVOLUTION II
Machining center Rapid MFC EVOLUTION II
Machining center Rapid MFC EVOLUTION II
Ends in 
d  h  min  s  Auction ended
Bulgaria Област София
9,223 km
Machining center
RapidMFC EVOLUTION II
buyer-protection
€8,400
To the auction
Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Podpfxjzln D Eo Agmjpw Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.
See details
Auction
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Cutting and processing center Rapid Optima VI
Ends in 
d  h  min  s  Auction ended
Bulgaria Област София
9,223 km
Cutting and processing center
RapidOptima VI
buyer-protection
€11,200
To the auction
Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Pjdpfozlnxisx Agmjpw Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels
See details
Auction
Cutting and processing center Elumatec SBZ 608
Cutting and processing center Elumatec SBZ 608
Cutting and processing center Elumatec SBZ 608
Cutting and processing center Elumatec SBZ 608
Cutting and processing center Elumatec SBZ 608
Cutting and processing center Elumatec SBZ 608
Cutting and processing center Elumatec SBZ 608
Cutting and processing center Elumatec SBZ 608
Cutting and processing center Elumatec SBZ 608
Cutting and processing center Elumatec SBZ 608
Cutting and processing center Elumatec SBZ 608
Ends in 
d  h  min  s  Auction ended
Bulgaria Област София
9,223 km
Cutting and processing center
ElumatecSBZ 608
buyer-protection
€10,000
To the auction
Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, power: 14 kW (19.03 HP), input current: 80 A, workpiece length (max.): 4,000 mm, machine/vehicle number: 6080008129, TECHNICAL DETAILS Maximum profile width: 130 mm Maximum profile height: 205 mm Maximum workpiece/profile length: 4,000 mm Ppsdpfezlnvuox Agmew Processing capacity: 80 units MACHINE DETAILS Connection: 3 N/PE 400 V Frequency: 50 Hz Current: 80 A Power: 14 kW EQUIPMENT Powered, continuously adjustable gripper Lifting function for smooth feeding Profile guidance on rollers Internal gripper to prevent damage to the profiles Integrated measuring sensors for workpiece length control Workpiece removal via outfeed table Portal design for high profile cross-sections Industrial PC with Windows operating system Barcode scanner
See details
Auction
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Front loader forklift Jungheinrich TFG S80GE 360ZT
Ends in 
d  h  min  s  Auction ended
Germany Schleswig-Holstein
7,667 km
Front loader forklift
JungheinrichTFG S80GE 360ZT
buyer-protection
€15,500
To the auction
Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,125 h, load capacity: 8,000 kg, lifting height: 3,600 mm, mast type: duplex, fork length: 2,050 mm, overall weight: 13,948 kg, An oil change was performed before the sale. Only the hydraulic oil was not changed. The filters have been replaced. TECHNICAL DETAILS Load capacity: 8,000 kg with load center at 900 mm Residual load capacity with Kaup 10T160 fork positioner: 7,320 kg with load center at 900 mm Tractive force with/without load: 45.6 kN Lifting height: approx. 3,600 mm Fork length: approx. 2,050 mm MACHINE DETAILS Engine: LPG GM 5.7L V8 Cylinders: 8 Displacement: 5,700 cm³ Rated speed: 2,200 rpm Power: 85 kW Operating hours according to display: approx. 4,125 h Operation: Solo-Pilot with multi-function display Dimensions & Weight Overall length including forks: approx. 5,950 mm Overall width: approx. 2,150 mm Height with mast retracted: approx. 3,160 mm Ppodpfx Aezlhnqogmew Height with mast extended: approx. 4,960 mm Height above protective roof: approx. 2,705 mm Self-weight: approx. 13,948 kg EQUIPMENT Kaup 10T160 fork positioner Duplex mast 3rd + 4th control circuit Side shifter Solo-Pilot Single pedal control Work lights front and rear Full cabin with heater Note: The two tires on the steering axle, as well as the fork tines, should be replaced. This can be requested and carried out by the seller. Fork tine length would be selectable.
See details
Auction
Laser cutting machine TRUMPF TruLaser 5030 classic
Laser cutting machine TRUMPF TruLaser 5030 classic
Laser cutting machine TRUMPF TruLaser 5030 classic
Laser cutting machine TRUMPF TruLaser 5030 classic
Laser cutting machine TRUMPF TruLaser 5030 classic
Laser cutting machine TRUMPF TruLaser 5030 classic
Laser cutting machine TRUMPF TruLaser 5030 classic
Laser cutting machine TRUMPF TruLaser 5030 classic
Laser cutting machine TRUMPF TruLaser 5030 classic
Ends in 
d  h  min  s  Auction ended
Slovenia Dravograd
8,449 km
Laser cutting machine
TRUMPFTruLaser 5030 classic
buyer-protection
€4,500
To the auction
Condition: used, Year of construction: 2007, operating hours: 39,023 h, machine/vehicle number: 1315318, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 900 kg, No minimum price – guaranteed sale to the highest bidder! The machine has not been powered on for approximately one year. TECHNICAL DETAILS Laser power: 5,000 W Working area (X x Y x Z): 3,000 mm x 1,500 mm x 115 mm Sheet metal thickness, structural steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm Pedpszlhcnjfx Agmopw Maximum workpiece weight: 900 kg Positioning speed max.: 300 m/min Positioning accuracy: +/- 0.1 mm MACHINE DETAILS Control system: CNC Siemens Sinumerik 840 D Operating hours, laser on: 77,107 h Operating hours, beam on: 39,023 h Dimensions & Weight Machine dimensions (L x W x H): 11,100 mm x 4,600 mm x 2,400 mm Machine weight: 12,000 kg EQUIPMENT Automatic pallet changer NitroLine FocusLine PlasmaLine SprintLine ContourLine
See details
Auction
4-axis CNC machine Elumatec SBZ 140
4-axis CNC machine Elumatec SBZ 140
4-axis CNC machine Elumatec SBZ 140
4-axis CNC machine Elumatec SBZ 140
4-axis CNC machine Elumatec SBZ 140
4-axis CNC machine Elumatec SBZ 140
4-axis CNC machine Elumatec SBZ 140
4-axis CNC machine Elumatec SBZ 140
4-axis CNC machine Elumatec SBZ 140
Ends in 
d  h  min  s  Auction ended
Netherlands Groningen
7,504 km
4-axis CNC machine
ElumatecSBZ 140
buyer-protection
€17,500
To the auction
Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Ppedpfx Aezhuyfjgmjw Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks
See details
Auction
Universal machining center DECKEL MAHO DMU 80 monoBlock
Universal machining center DECKEL MAHO DMU 80 monoBlock
Universal machining center DECKEL MAHO DMU 80 monoBlock
Universal machining center DECKEL MAHO DMU 80 monoBlock
Universal machining center DECKEL MAHO DMU 80 monoBlock
Universal machining center DECKEL MAHO DMU 80 monoBlock
Universal machining center DECKEL MAHO DMU 80 monoBlock
Universal machining center DECKEL MAHO DMU 80 monoBlock
Universal machining center DECKEL MAHO DMU 80 monoBlock
Universal machining center DECKEL MAHO DMU 80 monoBlock
Ends in 
d  h  min  s  Auction ended
Germany Baden-Württemberg
7,992 km
Universal machining center
DECKEL MAHODMU 80 monoBlock
buyer-protection
€15,500
To the auction
Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals Pjdpfx Ajzmry Togmjpw
See details
Auction
Vertical machining center BRIDGEPORT VMC 800
Vertical machining center BRIDGEPORT VMC 800
Vertical machining center BRIDGEPORT VMC 800
Vertical machining center BRIDGEPORT VMC 800
Vertical machining center BRIDGEPORT VMC 800
Vertical machining center BRIDGEPORT VMC 800
Vertical machining center BRIDGEPORT VMC 800
Vertical machining center BRIDGEPORT VMC 800
Ends in 
d  h  min  s  Auction ended
Germany Baden-Württemberg
7,992 km
Vertical machining center
BRIDGEPORTVMC 800
buyer-protection
€9,000
To the auction
Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Ppedpfx Agjzmryyomjw Control system: Heidenhain TNC 410 Clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant system with enhanced pump Coolant pressure: 20 bar Chip conveyor Operating manual
See details
Auction
Machining center MIKRON VCP 800 W
Machining center MIKRON VCP 800 W
Machining center MIKRON VCP 800 W
Machining center MIKRON VCP 800 W
Machining center MIKRON VCP 800 W
Machining center MIKRON VCP 800 W
Ends in 
d  h  min  s  Auction ended
Germany Baden-Württemberg
7,992 km
Machining center
MIKRONVCP 800 W
buyer-protection
€9,500
To the auction
Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Podpfozmrpusx Agmopw Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals
See details
Auction
Horizontal plate boring mill PARPAS ML 100 - 5000
Horizontal plate boring mill PARPAS ML 100 - 5000
Horizontal plate boring mill PARPAS ML 100 - 5000
Horizontal plate boring mill PARPAS ML 100 - 5000
Horizontal plate boring mill PARPAS ML 100 - 5000
Horizontal plate boring mill PARPAS ML 100 - 5000
Horizontal plate boring mill PARPAS ML 100 - 5000
Ends in 
d  h  min  s  Auction ended
Germany Sachsen
8,028 km
Horizontal plate boring mill
PARPASML 100 - 5000
buyer-protection
€7,000
To the auction
Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 100 mm, controller model: Heidenhain 415 B, TECHNICAL DETAILS Spindle diameter: 100 mm Travel in X-axis: 5,020 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 2,000 mm Tool holder: SK 50 MACHINE DETAILS Ppsdpfx Agezlryqemjw Control system: Heidenhain 415 B Rotary table dimensions: 2,500 x 2,000 mm EQUIPMENT Indexable milling head 2.5 60-position tool changer Rotary table manufacturer: Scharmann Note: The rotary function of the rotary table is defective. The machine is sold without pallet changers.
See details
Preview Trust Seal

Werktuigen Trust Seal

What is the trust seal?

Werktuigen certifies selected sellers with the Werktuigen trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Werktuigen staff.

  • What do we verify?

    Trade licence>

    Check of
    trade licence or commercial register extract

    Postal address>

    Verification of the dealer's
    postal address

    Bank details>

    Validation of the
    banking details

    Availability>

    Verification of
    accessibility     to
    main phone number

    Credit report>

    Credit report
    may not contain negative criteria

    Customer complaints>

    Buyer complaints
    can lead to withdrawal of the seal

  • What does this mean for you as buyer?

    The Werktuigen trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.

    Disagreements may of course still arise during the purchasing process. Werktuigen is not liable for any legal violations by buyers or sellers active on Werktuigen.