Diesel Forklift

Linde H80D/900

Condition: good (used), Year of construction: 2018, load capacity: 8,000 kg, lifting height: 3,300 mm, fuel type: diesel, construction height: 3,100 mm, with adjustable tine geometry and side shift. Dcjdpfx Ajz Ihwzeqton

Condition: used, functionality: fully functional, operating hours: 3,443 h, CLARK FORKLIFT LOAD CAPACITY: 50 Q. DIESEL NEW FORKS LENGTH: 1.80 MT. Dsdpowtffxsfx Aqtocn ORIGINAL FORKS LENGTH: 1.20 MT. (ALWAYS SUPPLIED) NEW SEAT WITH ELBOW REST MAX. LIFTING HEIGHT: 4.80 MT. WORKING HOURS: 3,443 SERVICE CARRIED OUT IN MAY 2025 READY FOR DELIVERY

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26038, Year of construction: 2021, operating hours: 23,946 h, load capacity: 8,000 kg, lifting height: 5,900 mm, load center: 900 mm, fuel type: diesel, mast type: triplex, motor manufacturer: DEUTZ, gearing type: hydrostat, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 14,050 kg, total height: 3,360 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, UVV, air conditioning, cabin, lighting, seat heater, sideshift, Equipment: Triplex mast with full free lift, overall height: 3360 mm, lift height: 5900 mm, load capacity: 8000 kg at a load center of 900 mm, fork positioner with side shifter, fork length: 1800 mm, road lighting according to STVO (German Road Traffic Regulations), LED work lights at the front and rear, fully enclosed cabin with heating, air conditioning, camera, DEUTZ diesel engine, foot-operated dual pedal, 6 SE tires, operating manual included. Technical condition at the time of sale: Dcjdpfx Ajzw U Uusqten Forklift truck has been technically overhauled! Major service newly performed! UVV inspection passed without any defects! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Available by appointment at any time during opening hours: Monday to Friday. From 8:00 a.m. to 6:00 p.m. Saturday from 8:00 a.m. to 1:00 p.m. TRANSPORT: Low-bed trailer or covered truck available at a reasonable price.

Condition: used, functionality: fully functional, machine/vehicle number: H2X396J00939, Year of construction: 2018, operating hours: 14,083 h, load capacity: 8,000 kg, lifting height: 3,670 mm, fuel type: diesel, mast type: simplex, construction height: 3,180 mm, power: 84 kW (114.21 HP), fork carriage width: 2,180 mm, empty load weight: 13,845 kg, total length: 3,350 mm, drive type: Diesel, construction width: 2,180 mm, Diesel forklift Chassis number: H2X396J00939 Load center: 900 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Transmission: Linde Hydrostat Condition: Limited operability Technical condition: Normal Front tires type: Super elastic Front tires size: 8.25-15 Front tires condition: 0 - 20% Rear tires type: Super elastic Rear tires size: 300-15 Rear tires condition: 0 - 20% Description: The unit is sold as-is. The mast shows some play. Common defects and signs of wear are present (hydraulic hoses, bearings, pins, etc.). We offer the forklift in functional condition, but without a UVV (accident prevention regulation) inspection. 3rd valve, half cabin, safety light, rotating beacon. Dcjdpjyvauxsfx Aqtjn

Condition: used, Year of construction: 2010, The Horizon AFC 566 FKT + PST-40 folding machine, manufactured in 2016, is a high-performance solution for efficient and precise folding operations. Currently in production and located in Germany, this machine is designed to handle a wide range of sheet sizes, from a minimum of 60 x 64 mm to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/h). Equipped with a flat pile feeder capable of handling a maximum pile height of 740 mm, it ensures continuous and efficient paper feeding. The primary folding unit is an AFC-566 FKT with 6 combi folding plates, offering manual pocket and roller configuration. It features a used condition roller and a cross fold unit with 1 knife, providing versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touch screen control for ease of operation. The delivery mode is a PST-40 press delivery, manufactured in 2010 with the serial number 360003. It has a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and organized output handling. This machine is well-suited for businesses seeking to enhance their folding capabilities with a reliable and high-performance solution. Format: 440 x 310 mm Equipment: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Dedpfx Ajwcqw Ssqtjcn Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

Condition: used, functionality: fully functional, machine/vehicle number: E1X353T00272, Year of construction: 2006, operating hours: 18,800 h, load capacity: 8,000 kg, lifting height: 3,750 mm, fuel type: diesel, mast type: simplex, construction height: 3,230 mm, power: 85 kW (115.57 HP), fork length: 2,400 mm, empty load weight: 13,340 kg, drive type: Diesel, Diesel forklift Chassis number: E1X353T00272 Load center: 900 Fork width: 200 mm Fork thickness: 70 mm Mast type: Standard Transmission: Hydrostatic Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 8.25-15 Front tire condition: 60 - 80% Rear tire type: Superelastic Djdpfezbff Hjx Aqtocn Rear tire size: 315/70-15 Rear tire condition: 60 - 80% Side shifter, fork positioner, 3rd valve, 4th valve, front work light, full cabin.

Condition: used, Year of construction: 2020, load capacity: 8,000 kg, lifting height: 5,530 mm, fork length: 2,400 mm, total length: 6,320 mm, · Lastschwerpunkt 900 mm · Gabelträger mit 8 Rollen für hohe Beanspruchung · Doppelpedalsteuerung für Vorwärts- und Rückwärtsfahrt · hydrostatisches Bremsen · Joysticks in Armlehne integriert · Blendfreies Display mit Anzeigen für u.a. Tankinhalt, Uhrzeit, Betriebsstunden, Serviceinfos. · Variable Verstellpumpe für geringeren Energieverbrauch · Linde Engine Protection System (LEPS): Überwachung · Warnung und Leistungsreduzierung beim Über- bzw. Unterschreiten verschiedener Leistungsparameter wie Motorölstand/-druck, Kühlwasserstand/-temperatur, Hydrauliköltemperatur, Luftfilterunterdruck · Hohe Sicherheit und Stabilität durch Linde Torsionsstütze · Hydraulisch gedämpfter und gefederter Komfortsitz mit umfassenden Einstellmöglichkeiten · Luftfilter mit integriertem Zyklonenabscheider · Neu für Evo-Modelle: Automatische Geschwindigkeitsregelung in Kurven · Fahrdynamikeinstellung inkl. Hubleistungsanpassung · Bis zu 10% niedrigerer Kraftstoffverbrauch · Präzise Linde Load Control in Armlehne integriert · Blendfreies Display mit Anzeigen für u.a. Tankinhalt, Uhrzeit, Betriebsstunden, Serviceinfos · Kontrollleuchten im Display für Motoröldruck, -überhitzung, Feststellbremse, akustischer Warnton für Motor- und Hydrauliköltemperatur, Luftfilterverschmutzung und Tankreserve · 12V Steckdose in Kabine · Achslast mit Last vorn/hinten kg 20580/2340 · Achslast ohne Last vorn/hinten kg 7540/7380 · Spurweite vorn 1752 mm · Spurweite hinten 1550 mm · Neigung Hubgerüst/Gabelträger, vor/zurück a/b (°) 5,0/9,0 Dcjdpfxsztgk Te Aqtjn · Sitzhöhe/Standhöhe 1505 (mm) · Kupplungshöhe 844 mm · Fahrgeschwindigkeit mit/ohne Last km/h 23/23 · Hubgeschwindigkeit mit/ohne Last m/s 0,51/0,54 · Senkgeschwindigkeit mit/ohne Last 0,56/0,48 · Zugkraft mit/ohne Last 54000 / 50000 N · Steigfähigkeit mit/ohne Last % 25/34 · Beschleunigungszeit mit/ohne Last s 6,7/5,9 · Betriebsbremse hydrost. · Nenndrehzahl min 2200 · Zylinderzahl/Hubraum cm3 4/4038 · Art der Fahrsteuerung hydrost./stufenl · Arbeitsdruck für Anbaugeräte bar 265 · Ölmenge für Anbaugeräte l/min 70 · Schallpegel am Fahrerohr dB(A) 77

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms - Safety pull-cords Dcedpfx Aezlqzgsqtsn - ERO cold glue system (3 guns + side glue wheel with reservoir)

Condition: used, Year of construction: 2020, load capacity: 8,000 kg, lifting height: 5,460 mm, total length: 6,180 mm, · Lastschwerpunkt 900 mm · Gabelträger mit 8 Rollen für hohe Beanspruchung · Doppelpedalsteuerung für Vorwärts- und Rückwärtsfahrt · hydrostatisches Bremsen · Joysticks in Armlehne integriert · Blendfreies Display mit Anzeigen für u.a. Tankinhalt, Uhrzeit, Betriebsstunden, Serviceinfos. · Variable Verstellpumpe für geringeren Energieverbrauch · Linde Engine Protection System (LEPS): Überwachung · Warnung und Leistungsreduzierung beim Über- bzw. Unterschreiten verschiedener Leistungsparameter wie Motorölstand/-druck, Kühlwasserstand/-temperatur, Hydrauliköltemperatur, Luftfilterunterdruck · Hohe Sicherheit und Stabilität durch Linde Torsionsstütze · Hydraulisch gedämpfter und gefederter Komfortsitz mit umfassenden Einstellmöglichkeiten · Luftfilter mit integriertem Zyklonenabscheider · Neu für Evo-Modelle: Automatische Geschwindigkeitsregelung in Kurven · Fahrdynamikeinstellung inkl. Hubleistungsanpassung · Bis zu 10% niedrigerer Kraftstoffverbrauch · Präzise Linde Load Control in Armlehne integriert · Blendfreies Display mit Anzeigen für u.a. Tankinhalt, Uhrzeit, Betriebsstunden, Serviceinfos · Kontrollleuchten im Display für Motoröldruck, -überhitzung, Feststellbremse, akustischer Warnton für Motor- und Hydrauliköltemperatur, Luftfilterverschmutzung und Tankreserve · 12V Steckdose in Kabine · Achslast mit Last vorn/hinten kg 20580/2340 · Achslast ohne Last vorn/hinten kg 7540/7380 · Spurweite vorn 1752 mm · Spurweite hinten 1550 mm · Neigung Hubgerüst/Gabelträger, vor/zurück a/b (°) 5,0/9,0 · Sitzhöhe/Standhöhe 1505 (mm) · Kupplungshöhe 844 mm · Fahrgeschwindigkeit mit/ohne Last km/h 23/23 · Hubgeschwindigkeit mit/ohne Last m/s 0,51/0,54 Dodpsztf Udefx Aqtecn · Senkgeschwindigkeit mit/ohne Last 0,56/0,48 · Zugkraft mit/ohne Last 54000 / 50000 N · Steigfähigkeit mit/ohne Last % 25/34 · Beschleunigungszeit mit/ohne Last s 6,7/5,9 · Betriebsbremse hydrost. · Nenndrehzahl min 2200 · Zylinderzahl/Hubraum cm3 4/4038 · Art der Fahrsteuerung hydrost./stufenl · Arbeitsdruck für Anbaugeräte bar 265 · Ölmenge für Anbaugeräte l/min 70 · Schallpegel am Fahrerohr dB(A) 77

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 11,989 h, load capacity: 8,000 kg, lifting height: 3,750 mm, load center: 900 mm, fuel type: diesel, mast type: duplex, power: 87 kW (118.29 HP), total height: 3,180 mm, Equipment: air conditioning, cabin, hydraulically sliding cabin, lighting, pallet forks, sideshift, trailer coupling, Diesel forklift LINDE H80D-01/900 Year of manufacture: 2011 Dsdpfx Aqezrnf Nstocn According to the hour meter: 11,989 hours 8 tons lifting capacity at 900mm load center 3.37 meters lifting height 3.18 meters mast height 3.37 meters overhead guard height 2.20 meters fork carriage width 2.60 meters fork length 87 kW Deutz 6-cylinder engine - FULLY EQUIPPED!! - Fork adjustment - Side shifter - Dual tires - Elevated special cabin - Cabin with hydraulic tilt - Reversing device - Rearview camera - Air conditioning - Radio - and much more... Immediately ready for use! Original paint! Selling price: 19,900,-- net Delivery also possible!

Year of construction: 2022, condition: ready for operation (used), There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible. Djdpsy Tx R Isfx Aqtscn

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 14,082 h, load capacity: 8,000 kg, lifting height: 4,450 mm, fuel type: diesel, mast type: simplex, construction height: 3,580 mm, drive type: Diesel, Diesel forklift Load center: 900 Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Dodpfx Aqjzvi H Nstecn Side shifter, fork positioner, 3rd valve, 4th valve, heater, full cabin, air conditioning,

Year of construction: 2017, operating hours: 13,573 h, condition: used, functionality: fully functional, fuel type: diesel, lifting height: 6,050 mm, mast type: simplex, construction height: 4,350 mm, drive type: Diesel, load capacity: 8,000 kg, Diesel forklift truck ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Dcodpfxevyv Ews Aqton Sideshift, fork positioner, 3rd valve, 4th valve, heating, full cab, air conditioning,

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, foundation tilting table (third-party manufacturer), tilting table/preparation table, waste stripper, electronic double-sheet detection, pull marks BS + AS, machine height increased by 300 mm, 1 die-cutting frame, various stripping frames and stripping pins (including cart), quick centering device for sheet stacks, manual non-stop feed, manual non-stop delivery, price ex works, dismantling and loading can be arranged for an additional charge! Video available upon request! In May 2026, a PLATEN CONDITIONING was carried out by BOBST on the die-cutting machine. All deposits were removed from the upper and lower tables, and the die was polished. The sector was opened and assessed as being in "like-new" condition. Photos, video, or invoice available upon request! Note: The platform must be adapted by the buyer! Longitudinal handrail missing! Technical main data: Maximum sheet size: 720 × 1020 mm, Minimum sheet size: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Dsdpjzmyfdefx Aqtjcn Processable materials: Paper / solid board: from 80 g/m² up to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Features of the Series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast set-up times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double-sheet detection

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 6 h, lifting height: 6,500 mm, fuel type: diesel, mast type: triplex, power: 85 kW (115.57 HP), motor manufacturer: Deutz, total height: 3,550 mm, total length: 4,050 mm, total width: 2,260 mm, color: other, General information Year of manufacture: 2024 Technical information Number of cylinders: 4 Engine capacity: 4.038 cc Empty weight: 14.807 kg Engine type: Deutz TCD 4.1 L4 Dsdpjxyuutsfx Aqtjcn Functional Lifting capacity: 8.000 kg CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Blower - Freelift - Non marking tires - Side shift - Work lamp(s) = Remarks = Drivetrain Internship / Tier: Stage V / Tier IV final General Country of production: Germany Condition CE type: CE Kaup fork positioner & side shift, 2400 mm forks, Trelleborg non-marking tires, Closed cabin with heating, Road lighting, Work lights