Diesel Forklift

Linde H 30 D

Condition: used, machine/vehicle number: H2X393G05053, Year of construction: 2016, operating hours: 15,338 h, load capacity: 3,000 kg, lifting height: 4,650 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,650 mm Fork spreader: 550–1,940 mm Fork length: 1,800 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Diesel Next service: in 461 hours UVV certificate valid until: 06/2027 Dimensions (L x W x H): 4,700 x 1,250 x 2,190 mm Operating hours: 15,338 h EQUIPMENT 3rd and 4th valve Full cab Heater Psdpszz Hr Tofx Appogt Windshield wiper LED work light, front LED work light, rear Comfort seat Fork spreader with side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 173

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts Pedpfx Asyn Em Rsppjgt OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X393D54192, Year of construction: 2013, operating hours: 10,839 h, load capacity: 3,000 kg, lifting height: 3,700 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, power: 44 kW (59.82 HP), motor manufacturer: Volkswagen, gearing type: automatic, fork length: 1,300 mm, tire condition: 90 %, empty load weight: 4,430 kg, color: orange, Equipment: full service history, sideshift, We are offering this Linde H30D forklift, manufactured in 2013, in ready-to-use condition. Manufacturer: Linde Model: H30D Year of manufacture: 2013 Condition: ready for use Type: forklift Automatic transmission. Pgsdpfxezvwm Rs Appot Lifting capacity 3000 kg, lifting height 3700 mm. Duplex mast. In excellent condition, fully functional. This forklift has always been well-maintained on a regular basis. It is being sold due to the electrification of the machinery fleet. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 12,199 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,730 mm, fork length: 1,600 mm, drive type: Diesel, Diesel forklift Mast type: Standard Condition: Ready for use and fully functional Technical condition: Normal Front tire type: Superelastic Front tire condition: 40 - 60% Rear tire type: Superelastic Podpez El A Nofx Appogt Rear tire condition: 60 - 80% Side shifter, fork positioner, 3rd valve, 4th valve, partial cabin

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Podpfx Aotu U Ebsppegt

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,066 h, load capacity: 3,000 kg, lifting height: 5,100 mm, free lift: 1,545 mm, fuel type: diesel, mast type: triplex, construction height: 2,330 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Pgedpfx Apezz T D Nepet Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Fork extension, side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning, rotating beacon, fabric seat cushion, roof guard, BlueSpot (rear), double pedal.

Condition: good (used), Year of construction: 1984, operating hours: 5,800 h, Linde H30D, Duplo315, with 3rd function, 3-cylinder, air-cooled DIESEL, as traded in. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. Pgodpsz Dhc Nefx Appst All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: excellent (used), Year of construction: 2011, operating hours: 2,450 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 12,001,400 mm, travel distance Z-axis: 18,001,790 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 3,000 kg, total height: 4,700 mm, total length: 12,700 mm, total width: 7,800 mm, rotary table diameter: 2,200 mm, rotational speed (max.): 200 rpm, overall weight: 57,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,450 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 460 mm, Equipment: chip conveyor, documentation/manual, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 6000 Y-axis travel mm: 1200/1400 Z-axis travel mm: 1800 (H) / 1790 (V) C-axis degrees: 360º (0,001) A-axis degrees: ±180° B-axis degrees: ±180° Rapid traverse m/min: 30 Worktable Table dimensions mm: 6000x1235 Milling/turning table nc: Table dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 max. torque Nm: 4600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/cont) Spindle torque Nm: 382/278 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Podpfx Apjzb H Tfjpegt Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 With free neighboring places mm: 200 With occupied neighboring places mm: 104 Max. Tool Length mm: 460 Max tool weight kg: 25 Chip-to-chip time s: 9.8 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Workarea light DXF import function Paper band filter Automatic door Indexing Head Set Up for Shaft Machining Axles can be hydraulically locked using the M function Machine running times Under power: 29447 Spindle Working: 2450 Basic machine dimensions / weight Length mm: 12700 Width mm: 7800 Height mm: 4700 Weight kg: 57000

Condition: good (used), Year of construction: 1996, operating hours: 2,600 h, lifting height: 3,800 mm, fuel type: diesel, mast type: duplex, Year of manufacture: 1996 Empty weight: 4.940 kg Lifting capacity: 3.000 kg Maximum passing height: 2.500 mm CE mark: yes Technical condition: good Visual appearance: good Linde H30D-02 | Year 1996 | 2,600 hours Nice Linde H30D-02 from 1996 with only 2,600 operating hours. This diesel forklift is equipped with a duplex mast, has an overall lowered height of approximately 2,500 mm and a lifting height of approximately 3,800 mm. A practical and versatile forklift for a wide range of applications in yards, workshops, warehouses and industrial environments. The duplex mast provides a good combination of lifting height and compact dimensions. The forklift is also prepared for sideshift, allowing a sideshift to be fitted for easier and more precise positioning of loads. With only 2,600 operating hours for a machine from 1996, the low number of hours is particularly interesting. A practical choice for anyone looking for a solid diesel forklift without necessarily investing in a newer machine. Specifications: Make/type: Linde H30D-02 Year: 1996 Pgedpsz A D Hnsfx Appet Hours: 2,600 Diesel Duplex mast Overall height: approx. 2,500 mm Lifting height: approx. 3,800 mm Prepared for sideshift Practical and versatile forklift An interesting Linde H30D-02 with low operating hours for its age, ready for a wide range of applications. Call us directly for more information or to arrange a viewing!

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 7,967 h, load capacity: 3,000 kg, lifting height: 4,655 mm, free lift: 1,424 mm, fuel type: diesel, mast type: triplex, construction height: 2,191 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Pgedpozx Iagefx Appet Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Load guard, side shifter, 3rd valve, rear work light, front work light, heater, full cabin, interior mirror, rotating beacon, fabric seat cushion, single pedal control

Condition: used, Dimensions: L 6990 mm, W 2500 mm, H 2720 mm. Weight 4191 kg. Tipping device for 140-660 l containers Pjdovkn Nvjpfx Appegt

Condition: good (used), Year of construction: 2010, operating hours: 12,850 h, Linde H30D-01 triplo530 / side shift / 4th function / 2010 / 12,900 hours / DIESEL A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Pgodpfjzzzn Aox Appet Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, machine/vehicle number: 26613, Year of construction: 2015, operating hours: 6,778 h, load capacity: 300 kg, lifting height: 3,650 mm, fuel type: diesel, mast type: simplex, construction height: 2,500 mm, Equipment: cabin, sideshift, .: 26613 Equipment details: Year of manufacture: 2015 Load capacity: 300 kg Lifting height: 3650 mm Operating hours recorded: 6778 h Mast type: Standard Mast height: 2500 mm Length/Width/Height: 2760 / 1252 / 2220 mm Operating weight: 4715 kg ---- Equipment: * Overhead guard * 3rd valve * 4th valve * Full cabin * Front work light * Rear work light ----- Attachments: * Side shifter Pjdpfxjzb H Nte Appegt * Fork positioner ---- Additional equipment information: Reverse warning system The operating hours are generally the recorded hours. We would be happy to offer you suitable transportation. We have another 250 - 300 forklifts, attachments, and sweepers available for you immediately. Of course, we also offer rentals! We will gladly buy your OLD machine. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Subject to prior sale and errors for this offer. In our retail business, the equipment is sold in its current condition, without refurbishment. All information without guarantee, errors and changes reserved.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details. • A-axis rotation: +90° / -120° • C-axis rotation speed: 800 rpm • Distance table–spindle nose: 160–760 mm • Rapid feed (all axes): 50 m/min • C-axis table diameter: 630 mm • Max workpiece size (D × H): 830 × 550 mm • Tool magazine: 64 positions (expandable to 166) Pgsdpeyia Tlsfx Appjt Technical Specification Taper Size HSK 63

Condition: used, functionality: fully functional, machine/vehicle number: H2X393E02908, Year of construction: 2014, operating hours: 10,720 h, load capacity: 3,000 kg, lifting height: 4,600 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,150 mm, fork carriage width: 1,150 mm, fork length: 1,800 mm, empty load weight: 4,505 kg, total length: 2,800 mm, drive type: Diesel, construction width: 1,250 mm, Diesel forklift Chassis number: H2X393E02908 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Linde Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 27x10-12 Front tire condition: 40 - 60% Rear tire type: Superelastic Pgjdpfjzw R Hgjx Appst Rear tire size: 23x9-10 Rear tire condition: 0 - 20% Side shifter, fork positioner, 3rd valve, 4th valve, front work light, half-cab.