Heating & blower

Kohlbach Siloaustragung

Kohlbach – Hydraulic discharge system with push rods
1. System description
The two-beam hydraulic discharge system is used for the uniform and continuous discharge of wood chips from a rectangular fuel silo.
The discharge shovels transport the material through alternating hydraulic lifting movements to feed the heating boiler, thereby ensuring a consistent fuel supply.
2. Main dimensions
Silo length:
Version with 6 discharge shovels: 7.50 m
Width of shovels: 900 mm
Shovel depth: 250 mm
Shovel height: 70 mm
3. Drive and operating principle
Hydraulic drive with 2 hydraulic cylinders
Automatic, alternating lifting control, synchronized with the boiler control
4. Connections
Material discharge into a central collection channel
Further transport by means of a screw conveyor or chain conveyor
Connection to the heating boiler: DN 315
5. Installation requirements
Industrial floor in MONO-FINISH quality with a levelness tolerance of ±5 mm
Foundation plates, ceiling openings and cladding to be carried out on site
Sufficient service access for the hydraulic unit must be ensured
6. Advantages
Reliable operation with wood chips of different grain sizes and qualities
Dedpfx Afozl Hqkj Sswa
Consistent fuel feed for stable 24/7 continuous operation
Low maintenance effort
The system is dismantled and ready for loading onto the truck.
The discharge system does not require special transport because:
the discharge beams can be disassembled into 6.3 m long segments,
the transport width is significantly below 4.24 m, as the beams are removed individually,
the discharge shovels can be dismantled,
transport with a standard semi-trailer is possible.
Inspection in our warehouse in Szentendre/dismantled is possible after prior arrangement.

The listing was translated automatically. Translation errors are possible.