Air compressor

Kaeser SK26

Condition: used, Year of construction: 1993, feed pressure 8,0 bar liter capacity 2340 l/min Number of working hours 13382 h voltage 400 V total power requirement 15,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,0 x 0,8 x 1,3 m Nedez Dxn Ajpfx Aphjwl Serial no. 1006 Operating hours run: 26736 Operating hours load: 18261

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data Nedjudi Unopfx Aphewl TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: used, Full container of used electric screw compressors for export. Container loading included in the price. Nwjdpfsw Imvyex Aphel

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Auction of two Kaeser screw compressors, one Kaeser refrigeration dryer, and one compressed air tank! Screw compressor Kaeser SK 22 Year of manufacture: 2020 Screw compressor Kaeser SK 19 Year of manufacture: 1995 Refrigeration dryer Kaeser TB 26 Year of manufacture: 2016 Compressed air tank Nwsdpfxjzktnys Aphsl Volume: 500 l Year of manufacture: 1986

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Nwedowwvwyepfx Aphol

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 2 h, Exhibit model available immediately: New Kaeser SK 26 SFC frequency-controlled screw compressor (12 bar) Sigma Control 3 controller Max. pressure: 12 bar Rated power: 15 kW Delivery rate: 0.82 to 2.09 m³/min Noise level: 68 dB(A) Compressed air outlet: 1" Dimensions (L x W x H): 750 x 905 x 1245 mm Weight: 337 kg Nwodpfx Apjzklazshjl Operating hours: 1.9 h Financing: Convenient leasing options via our partner bank available for new machines. Visit us: Come visit our retail store. Our stock: We always carry a wide selection of new and used compressors!

Condition: good (used), Kaeser SK26 Air compressor Nederk Rn Sspfx Aphswl Serial: 264957 Air compressor, 15Kw, 7.5Bar, 3Ph

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Nwedpfx Aoinur Aephol Power: 11kW

Condition: good (used), Kaeser SK26 Air compressor Serial: 2610493 Air compressor, 15Kw, 7.5Bar, rated motor speed 3000min, 3Ph Nodpfx Apsrk Rplohewl

Condition: good (used), Kaeser SK26 Air compressor Nwjdpfxjrk Rppj Aphjl Serial: 265125 Air compressor, 15Kw, 7.5Bar, 2.4M3/min, 3Ph

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Nsdot A Uyuopfx Aphswl Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Condition: good (used), Kaeser SK26 Air compressor Njdpork Rpwefx Aphjwl Serial: 2613172 Air compressor, 15Kw, 7.5Bar, rated motor speed 3000min, 3Ph

Condition: used, Year of construction: 1993, functionality: fully functional, Kaeser SK 26 Rated output: 15 kW Permissible operating overpressure: 10 bar Year: 1993 Kaeser SM 8 Rated output: 5.5 kW Permissible operating overpressure: 10 bar Year: 1986 Compressed air tank Kaeser Capacity: 500L Permissible operating overpressure: 11 bar Year: 1992 Refrigeration dryer OM Njdpfx Apewn H Hyohjwl Rated output: 0.8 kW Capacity: 3000 l/min. Permissible operating overpressure: 16 bar Year: 2013

Condition: excellent (used), - 30kW engine - built-in dryer - Max. working pressure 7.5 bar Nodpjwlcq Nsfx Aphjwl

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1.9764.5/3960, overall weight: 290 kg, total length: 784 mm, total width: 820 mm, total height: 1,017 mm, power: 15 kW (20.39 HP), operating pressure: 8 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The KAESER SK26 lubricated compressor from 2004 is a reliable solution for your compressed air requirements. Renowned for its durability and efficiency, this model is ideal for industrial environments that demand consistent performance. Even as a pre-owned unit, the SK26 remains a popular choice for those seeking both cost-effective and high-performing solutions. The KAESER SK26 features proven technologies to optimize energy efficiency while reducing operating costs. Its cooling and lubrication systems are engineered to extend the compressor’s service life, ensuring long-lasting and trouble-free operation. This makes it a smart option for any business looking to streamline operations while keeping expenses under control. Nwedpfxjx Tt Ars Aphjl With its robust design and ability to deliver a continuous airflow, this compressor is suitable for a variety of industrial applications. Whether for continuous operation or specific requirements, the 2004 KAESER SK26 delivers reliable performance to help maintain high productivity within your company.