Emergency generator 125 kVA

GENJETPOWER GFS-138

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Cjdpjfz Anpsfx Ahtsgw Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm TONNAGE: 60 ton THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm Cgjdpoxn U Rqofx Ahtsw

Condition: refurbished (used), Year of construction: 2020, pressing force: 500 t, pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm ram surface:1100 x 800 mm Daylight Opening:800 mm Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Cgjdjffamvspfx Ahtew Safety control:PILZ Multi

Year of construction: 2002, condition: good (used), functionality: fully functional, doubledeck screen box: 1.000 x 5.000 mm squared meshes on both screen decks E-motor 4 kW Codpfxslxzkks Ahtsgw steel-construction and outlet chutes

Condition: used, Year of construction: 1991, pressure 500 t distance between columns 1910 mm stroke 500 mm Distance table/ram, max. stroke up, adjustment up 700 mm table surfache without cutting impact cushions 1910 x 1360 mm table surfache with cutting impact cushions 1600 x 1360 mm Cgjdpsvuuiqjfx Ahtjw table height over floor 800 mm ram surface 1600 x 1270 mm Side window 600 mm speed down 400 mm/s speed up 330 mm/s working speed 10 - 28 mm/s oil volume 1200 l power requirement 60,0 kW weight 40,0 t Dimensions (WxDxH) 3,6 x 2,5 x 5,0 m height over floor 4,5 m with oil-hydraulic drive, cutting impact cushioning, two-hand operation table size depending on cutting impact devices: - without approx. 1910 x 1360 mm - with approx. 1600 x 1360 mm

Year of construction: 2009, condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Cedpfxedq U S Is Ahtegw -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Condition: used, Year of construction: 1999, Pressure 400 t stroke 800 mm distance between columns 2820 mm Side window 950 x 1100 mm distance table/ram (stroke up) 1600 mm table surface area 2800 x 1200 mm die cushion capacity in table 150 t die cushion stroke in table 200 mm Cedpfsv Sva Sox Ahtegw die cushion area in table 2000 x 800 mm table height over floor 650 mm ram surface 2800 x 1200 mm speed down 420 mm/s speed up 300 mm/s working speed 17,5 - 29,5 mm/s oil volume 2500 l power requirement 75,0 + 22,0 kW Weight 50,0 t dimensions (WxDxH) 4,1 x 2,8 x 7,2 m height over floor 6,15 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, hydraulic ram interlocking, two-hand and four-hand operation

Condition: ready for operation (used), machine/vehicle number: YC-67958, Max. operating pressure: 210 bar Drive motor: 380 V, 11/13.2 kW Oil tank: 500 x 900 x 600 mm (height) Cedpjd Efdyefx Ahtegw Oil tank capacity: 250 l Space requirement: 1150 x 700 x 1070 mm (height)

Condition: good (used), functionality: fully functional, Screen area: approx. 1,400 x 2,800 mm Cedpfx Ahotpaydjtogw with plastic screen panels 1.5 x 11 mm Straightener SCHENCK DF3 Drive station Steel construction with discharge box

Condition: used, Year of construction: 1993, pressure 500 t distance between columns 2240 mm Cgjdpfx Aovuk I Nehtjw stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm table surface area 2050 x 1800 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s depth of the foundation 3,0 m power requirement 122 + 75 + 64,5 kW weight 110,0 t Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m height over floor 6,8 m with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Foundation depth approx. 3,0 m press is currently under revision with control Siemens S 7 / safety control Pilz