Shut-off valve

Danfoss SVA-ST65D

Condition: like new (used), Year of construction: 2004, dry - cast epoxy resin distribution 3 phase transformer manufactured by ABB Zaragoza, Spain, type DTE 1000/24, 50Hz, 1000kVA, 20000 ( ± 2 x 2.5 %) /410V; Dyn11, IP00, IEC losses, year of manufacture 2004 and 1996, available 2 pcs on stock, rutine test protocols. Fedpoxvlm Eefx Akcegh

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 118394, type of input current: AC, overall weight: 2,540 kg, input voltage: 21,500 V, input frequency: 50 Hz, nominal power (apparent): 800 kVA, secondary voltage: 420 V, protection type (IP code): IP00, temperature: 100 °C, type of output current: AC, output voltage: 420 V, Equipment: type plate available, Transformer that has been used on short occasions for backup operation, especially the last two years, is in a heated container. Can be sold with or without container, can also be rented for short periods, We have our own crane truck if express delivery is needed. The container can also be supplemented with low-voltage switchgear made by ABB Kabeldon attached to the outside of the container. Fodpox Run Djfx Akcegh

Condition: used, total length: 6,000 mm, total width: 2,400 mm, total height: 2,900 mm, Used 20ft container with 170KW concrete cooling system Price per piece € 5950,- Excl. VAT Power: 170KW Dimensions: H2900 mm Fedpfeurihrsx Akcogh W2400 mm L6000 mm Price is collected ( self-loading with Crane ) At additional cost delivered on location Available from stock ( subject to interim sales )

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large air conditioning (HVAC) systems where high efficiency and ease of maintenance are paramount. Technology Patented BACross III fill system, which allows for easy inspection of the fins to prevent biological growth (e.g., Legionella). Main Features of the S1500E Series Maintenance Access: A large, inward-swinging access door, as well as internal maintenance platforms, allow technicians to conveniently perform inspections while standing inside the unit. Hygiene Control: The design minimizes standing water and protects against sunlight through special air inlet elements, which reduces algae growth. Flexibility: Thanks to the single-sided air inlet, the cooling tower can also be installed in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Fgodpfx Akeynkbmecsh Typical Applications Industrial Cooling: Used in factories for process cooling. Air Conditioning (HVAC): Used in large building complexes as part of a central chilled water system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity because the actual performance depends entirely on the prevailing thermodynamic ambient conditions and the system temperatures. This model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Water temperatures: The performance changes significantly depending on the inlet warm water temperature (e.g., 35 °C) and the outlet cold water temperature (e.g., 29 °C). Air volume flow: According to the technical data from BAC, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three 11.0 kW fan motors. If this air volume is reduced by a frequency converter (e.g., during nighttime operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of cooling capacity the tower produces. Technical Data: Fan & Air Data Air volume flow: 60.0 m³/s (generated in draw-through operation) Fan motors: 3x 11.0 kW (axial fans) Technology: Integrated belt drive Water flow: 198 l/s Hydraulic Connections Water inlet (fluid inlet): 1x DN 250 (nominal size ND 250 mm) Water outlet (fluid outlet): 1x DN 300 (nominal size ND 300 mm) Make-up water connection: 1x DN 40 (ND 40 mm) Overflow / drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions & Weights Operating weight: 11,446 kg (including water filling up to the overflow) Shipping weight: 5,350 kg (empty weight) Heaviest single part: 3,

Condition: excellent (used), Balancing valve, shut-off valve, ball valve, ball tap, pressure relief valve, control valve, flow switch, balancing valve -Manufacturer: Alfa Laval, control valve flow switch, unused -Type: RV4 .: 1762570-80 -Size: DN25 Fgsdeq Rx Abspfx Akceh -Number: 2x valve available -Price: per piece -Dimensions: 125/104/H195 mm -Weight: 3.6 kg/piece

Condition: used, Quantity available: 29 units Manufacturer: GEA Tuchenhagen Type : Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81 Fjdpfx Akeygnb Iocegh Nominal diameter : DN 65 Setting air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve type JL1040 without drive -Connection: DN50 PN6 -Quantity: 2x valve available Fodpfjrtcdwsx Akcegh -Price per piece -Dimension: 230/165/H200 mm -Weight: 10.4 kg/pc.