Screw air compressor

BOGE S220

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Pgjdpfx Apsinur Aopst Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW

Condition: as good as new (ex-display), PFAFF 8320 - 111/101 long-arm version with table Podpfsxa D Hrjx Appsgt

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. Podpfxowlp Hdo Appogt We invite you to familiarize yourself with our full offer.

Condition: new, weight max. in kg 1200 kg fork length 1150 mm stroke height 3000 mm high 2150 mm weight of the machine ca. 0,625 t dimensions 1,71 x 0,8 x 2,15 m Pgjdsifw Utspfx Appot The ESL122 is a 24V/80Ah lithium-ion powered electric forklift. It is equipped with a high-strength chassis and a high-rigidity mast that ensure high operational stability. Offering comfortable maneuverability and efficient and effective vertical stacking, this model is ideal for operations in tight spaces.

Condition: new, Year of construction: 2025, TPO0909E powder coating oven Psdpfx Apofgnytjpegt Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Rod for hanging details * Convection (Equal temperatures throughout the oven), * Locks for safe opening and closing, * Maximum operating temperature: 230°C. TQ0906 powder coating booth Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1,6kW * Air capacity: 3200m3/h, * Hermetic lamp: 1pcs. * Automatic filter cleaning system * The cabin is equipped with a set of pneumatic quick connectors * Cartridge filter: 1 pcs * Paint recovery container Oven, cabin in stock, ready for shipment. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, warranty duration: 12 months, total width: 2,300 mm, total length: 1,300 mm, total height: 2,450 mm, type of input current: three-phase, Powder paint booth, suction wall TQ2020 Working dimensions (mm): 2000 (width) x 2000 (height) x 400 (depth) Overall dimensions (mm): 2300 (width) x 2450 (height) x 1300 depth Psdpfx Apod S N Szspsgt SPECIFICATION: • Fan power 2.2 kW, • Efficiency 10,500 m³/h, • 3 x 100% polyester filter • Filtration degree at the level of 99.9%, • Control panel IP 66, • Automatic filter cleaning • Hermetic lighting IP 65. • Paint tank Booth available immediately (Stock status) CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. brand products are EC certified. We offer our own transport - prices are set each time, for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Equipment: brochure finisher, raster image processor, We are offering this very well-maintained Xerox C60 digital printing press, manufactured in 2021. Included: EFI Fiery (external) DUAL OHCF PR Booklet Finish + FIM Total clicks on the counter: only approximately 315,000! Pgodszlundjpfx Appot If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of input current: three-phase, type of cooling: air, overall weight: 341 kg, input voltage: 400 V, total width: 780 mm, total length: 1,870 mm, total height: 1,450 mm, warranty duration: 12 months, Aircooled chiller MTA TAE EVO TECH 081 22 KW Cooling capacity: 22 kW / 6.26 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Finned evaporator immersed in tank. Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP103KCE-TFD-477 (scroll) Type of refrigerant: R410а Number of fans: 1 pcs. Hydraulic module: 1 pcs. water pump Lowara CIE120/5/D, expansion vessel, buffer tank. Dimensions: 1.87x0.78x1.45 m. Weight: 341 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Pjdpfx Aoxwcafeppsgt The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, DRILL PRESS WITH BELT DRIVE DIGITAL DEPTH GAUGE, REVERSIBLE TABLE WITH INTEGRATED VISE AND SCORER LED LIGHT Quick-action keyless chuck 1 - 16 mm B18 CM 4 chuck attachment SUPPLIED. Podpfx Apjm E Uhwjpegt Drilling capacity on cast iron with Ø 32 mm pre-hole. Max drilling capacity on steel with pre-hole (s235jr) Ø 28 mm Continuous drilling capacity Ø 20 mm Morse taper 4 Spindle 1 - 16 mm B18 Approximate spindle speed (12) 150 - 2450 rpm Spindle stroke 120 mm Spindle sleeve ø 62 mm Column ø 92 mm Height 1720 mm Spindle-column distance 255 mm Distance from machine nose to table 700 mm Table dimensions 460 x 425 mm Distance machine nose-base 1220 mm Hollow 14 mm Clamp 210 x 165 mm Single-phase motor 230 V 50 Hz 1.5 kW Net weight 135 kg Packaging dimensions 1415 x 655 x 320 h mm Gross weight 158.00 kg

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 5, color channels: 4, resolution (max.): 2,400 dpi, number of feeding trays: 6, counter reading (black): 121,531, counter reading (color): 236,585, input voltage: 220 V, Equipment: auto duplex, Xerox PrimeLink C9070, including OCT, 1OHCF, and an external Fiery Controller running Windows 10 on an SSD. Total color page count: 236,585 Total black and white page count: 121,531 Total page count: 358,116 ⚡ High productivity with 70 color pages per minute. 🎨 Very consistent color quality thanks to the EX Fiery Controller. 📚 Suitable for brochures, flyers, business cards, posters, book covers, and direct mail. 📄 Supports heavy paper stocks up to 350 g/m². 📏 Long sheets up to 660 mm for banners and triptychs. 🔄 Large paper capacity reduces downtime during production. 🖨️ Professional workflow integration for graphic production environments. Are you looking for other options for this machine? We are flexible and can configure the machine to your specifications! Psdpfx Aozqbb Usppogt This machine has been inspected and thoroughly tested by our own specialized technical service department. If you require further information, please do not hesitate to contact us. Worldwide shipping is possible.