Compressor ATLAS COPCO LF 2,2 kW STOMATOL

Atlas copco LF 3

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Hsdpfx Akoxpww Asbjl Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor NEW Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min • main engine power - 7.5 kW • tank - 500 l • maximum operating pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • user manual in Polish • weight - 227 kg Hsdpfx Akjhkttpsbel Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • available within 7 working days

Condition: new, Year of construction: 2026, Viber-Air INV11-500 Screw Compressor with Dryer and Inverter Hodpfx Akoxdbubjbel Power: 11 kW / 7.5 HP Motor Speed: 3000 rpm Tank: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 1500 l/min Drive type: direct drive Outlet diameter: G 1 Dehumidifier: TR-20HP Cooling: oil Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length / width / height): 1900 / 750 / 1030 mm Weight: 500 kg Suction capacity: 1800 l/min Discharge capacity: 1500 l/min

Condition: new, volume flow: 1,994 m³/h, noise level: 67 dB, type of cooling: air, pressure: 10 bar, type of input current: three-phase, tank capacity: 500 l, Equipment: documentation/manual, Atlas Copco G15FF screw compressor, brand NEW! Specification: • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power 15.0 kW • 500 l tank • maximum operating pressure 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) Additional information: • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • meets CE standards • operating instructions in Polish and a complete set of documents for UDT Hjdpfxoq E Irae Akbsl • possibility of obtaining a manufacturer's warranty • available immediately or within 7 working days

Condition: new, Year of construction: 2024, machine/vehicle number: MA0173, new KAESER EPC 840-250 lg piston compressor - 10 bar with horizontal lacquered 250 litre container With KAESER DRAIN (tank emptying) Year: 2024 2 cylinders max pressure: 10 bar Hodpeityx Tsfx Akbsl Rated power: 4.0 kW Volume flow at 6 bar : 590 l/min Volume flow at 8 bar : 530 l/min Sound level: 77 dB(A) Compressed air output: 1/2" Dimensions length x width x height: 1590 x 600 x 1140 mm Weight: 165 kg Visit our shop. We always have a wide range of new and used compressors on hand!

Condition: good (used), Year of construction: 2000, Atlas Copco ZT30 Air compressor Hsdpfjvtcw Tsx Akbel Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank

Condition: new, Year of construction: 2026, functionality: fully functional, Set including LUFT 700 screw compressor, N10S refrigeration air dryer. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Hodpfxjrh E Dij Akbel Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, Set including LUFT 1500 Inverter Screw Compressor, 1000L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 1000-liter vertical compressed air tank equipped with fittings and the IZBERG N20S air dryer, provides a complete, efficient, and modern solution for compressed air systems. The LUFT series compressor from the Polish brand Cormak represents the latest technology in pneumatics, combining high-quality materials and precision-engineered components. Its low operating costs, ease of maintenance, ergonomic and durable design, and high performance guarantee reliable and efficient operation in industrial applications. Technical Specifications – LUFT 1500 INVERTER Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Hsdpfx Aksxnyhujbjl Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Connection (BSP): 1" Maximum Operating Pressure: 10 bar Max. Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Flow Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 1000L Vertical Air Receiver Tank Capacity: 1000 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Weight: 230 kg Number of Connections: 6 Connection Sizes: 2", 1/2" Dimensions: 230 × 80.8 cm

Condition: good (used), Year of construction: 2000, Atlas Copco ZT30 Air compressor Hedpfsvtcy Uox Akbjl Serial: AIF065085 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank

Condition: like new (used), Year of construction: 2022, operating hours: 175 h, functionality: fully functional, overall weight: 340 kg, fuel tank capacity: 500 l, volume flow: 1,994 m³/h, noise level: 67 dB, Atlas Copco G15FF screw compressor Specification: • condition - used • manufacturer - Atlas Copco • model - G15FF • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power - 15.0 kW • tank - 500 l • maximum operating pressure - 10.00 atm • working hours under load - 175 mth • working hours - 715 mth • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • 2022 year of production • weight - 340 kg Hjdpfx Ajvkxrnskbol Additional information: • the machine is in excellent technical condition, ready for immediate use • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs