Used other vacuum technology for sale (37)

Year of construction: 2026, condition: like new (used), functionality: fully functional, - inside diameter 900 mm and inside length 2500 mm - door with the locking system (manually) - fan inside the tank with the electrical engine outside - water cooled - 8 vacuum ports - electrical heating about 15 kw coils - Working pressure 10 bar - Adjustable AIR max. working temperature 180 °C - Equiped with related valve and pipes -With an inside trolley and outside cart -With 1 set of installation accessories -With automatic control system - PLC unit is Siemens Simatic S7 -With the installation air accessories Gkolhccqozkwh Dokoa - weight 1300 kg

Year of construction: 1997, operating hours: 30,000 h, condition: used, functionality: fully functional, OVERHAUL in 2022 New reinforced table – 660x960mm No support leg /it is available for mounting, but the program needs to be updated/. It has a new controller and can operate in sheet feeding mode. Price: 80,000 PLN Below are the specifications: Gkslszt Sukjhccqkea Effective forming area 650 x 950mm Table stroke 300 mm Film width Up to 700 mm Installed power 15 kW Heating panel power 13 kW Pneumatic table lifting 0.4 MPa Compressed air consumption 5 m3/h Thickness of forming material 0.15-6mm Performance in cycles per hour 40 - 100 Weight approx. 250kg Dimensions: depth x width x height 1250mm x 2230mm x 2040mm

Condition: refurbished (used), Polycold PFC1102: be good as new be available at short notice Gelhcoftzdrscqkoka

Condition: new, Year of construction: 2018, Available: 3 pieces (new) Parker MADIGAS nitrogen generators are used to produce nitrogen gas from compressed air and are an economical, reliable and safe alternative to traditionally supplied nitrogen in cylinders or in liquid form. Nitrogen is used as an inert, clean and dry gas to eliminate oxygen from products and processes Overall dimensions W 450 x D 609 x H 1034 mm. Gkolhsvdty Tjccqksa Minimum/maximum operating pressure 6/10 bar Weight 196 kg Volume 29.3 l Voltage 110/230 V Year of manufacture: 2018

Condition: used, Year of construction: 2008, functionality: fully functional, 🚨 FOR SALE – Intellitech GlasLift 250 Vacuum Glass Lifter 🚨 💥 Reliable. Powerful. Ready to work! Looking for a compact and efficient vacuum glass lifter? This Intellitech GlasLift 250 is in excellent working condition and ready for its next project! ✅ NEW BATTERY 🔋 ✅ Lifting certification valid for the next 2 years 📋 ✅ CE Certified ✔️ 🔧 Technical Specifications: • 🏋️ Max. lifting capacity: 250 kg (551 lbs) • 📏 Max. lifting height: Approx. 2.5–2.7 m • 🔄 Rotation & separate height adjustment • 🧲 4 vacuum suction cups (Ø 200 mm) • 🚪 Minimum machine width: 620 mm (fits through standard doorways) • ⚖️ Operating weight: 260–410 kg (depending on counterweights) • 🔋 12V battery system • 🔌 220V charger included • 🏗️ Ideal for glass panels, windows, façades and other smooth materials. 📍 Machine is ready for immediate use. 📩 Contact us for price, more photos or a video demonstration! Golhszfbiueccqkska #GlassLifter #VacuumLifter #GlassInstallation #Glazing #ConstructionEquipment #GlassHandling #WindowInstallation #MachineryForSale #UsedMachinery #ConstructionTools #GlassIndustry #Intellitech #GlasLift250 #Energlass #ForSale

Year of construction: 2002, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: AB 460 200, We offer a used vertical sputtering system, an ARDENNE VISS 300. The system dates back to 2002 and was expanded with a third chamber in 2016. The system features an airlock and three chambers equipped with SSM750RF magnetron sputtering units from Ardenne. This includes one generator from Trumpf Hüttinger, model PFG2500RF. There is also a dual magnetron sputtering source that is currently not installed, along with the corresponding control unit from Astral. There is a temperature control unit for one of the two cooling circuits to maintain a constant temperature, e.g., 38°C, as well as two external cooling units with heat exchangers. Zinc oxide (ZnO) and zinc sulfide (ZnS) were sputtered in the chambers. The system was in use until the end of May 2026 and was shut down without any defects. The system was regularly maintained by the operator and is in very good condition. Before delivery, we will service all installed vacuum backing pumps and turbopumps (bearing replacement). On request, assembly and commissioning can be arranged on-site. Golhccqjzp Ep Tjkska If you are interested in the system, please do not hesitate to contact us with any further questions.

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Gslhccqjvg U Dxskska Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: used, vacuum lifter units, Manufacturer: Fezer Type: RC 0010 B 5Z1 Vacuum: 20 mbar Gslhccqjy E Twtjkska Overall dimensions: 720 x 600 x 570 mm Weigth: ~30 kg This includes a flash pad : 4 pieces Max lifting capacity: 65 kg/ pc /pad

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, X-Floc EM400/440 Insulation Blowing Machine Professional high-performance blowing machine designed for processing a wide range of loose insulation and fibre materials. Suitable for open blowing, dry injection, damp-spray applications and material conveying, it can be used both on construction sites and as part of a stationary production system. The machine is equipped with a large loading hopper of approximately 1,000 litres, capable of holding around 5–6 standard bags of insulation material. Four rotating shredder shafts progressively break up and condition the compacted fibres before transferring them into the rotary airlock. The adjustable airlock feed gate allows precise control of the material flow. Depending on the version and material used, the EM400/440 can reach a processing capacity of up to approximately 1,600 kg/h. The adjustable air system delivers a maximum pressure of 540 mbar, with an air volume of approximately 100–430 m³/h for the EM400 and up to 100–680 m³/h for the EM440. Main features: Gjlhccqszlggxjkoka Suitable for different insulation and fibre materials Two-stage material conditioning system Four high-speed shredder shafts Approx. 1,000-litre loading hopper Adjustable material flow with 10 feed-gate positions Low-dust loading system with transparent strip curtains Connection for external dust extraction Remote adjustment of air and material parameters Robust, low-maintenance industrial construction Easy access to internal components for servicing Direct NW 76 mm hose connection Suitable for mobile or stationary applications The machine can be operated using a cable or optional wireless remote control, allowing the operator to adjust air output, material supply and pressure-control functions directly from the working area. Technical data: Processing capacity: up to approx. 1,600 kg/h Maximum pressure: 540 mbar Hopper volume: approx. 1,000 litres Shredder shafts: 4 Dimensions: approx. 1,285 × 1,000 × 1,800 mm Filling height: approx. 1,250 mm Hose outlet: NW 76 mm EM400 power: approx. 7.5 kW EM440 power: approx. 10.5 kW Weight: approx. 425 kg for EM400 / 445 kg for EM440 Maximum conveying height: approx. 20–45 m for EM400 / 20–60 m for EM440 Optional equipment may include a wireless remote control, pressure-relief valve, internal or external air amplifier, suction drum and dust-extraction system.

Year of construction: 2019, operating hours: 30 h, condition: used, functionality: fully functional, machine/vehicle number: 118, Vacuum membrane press VPR 3500/40 – Year of manufacture 2019 – very little use For sale is a vacuum membrane press VPR 3500/40 from our carpentry workshop. The machine has been used very little, is in very good condition, and, to the best of our knowledge, is technically flawless. An inspection and demonstration on-site is possible by arrangement. The machine is suitable, among other things, for veneer work, molded gluing, coatings, and similar applications in carpentry and interior design. Golhccqoziz Ufekeka Technical data: Working area: 3,500 × 1,500 mm Frame internal dimensions: approx. 3,400 × 1,400 mm Folding table with 12 mm tabletop for space-saving installation Becker vacuum pump Motor: 1.25 kW Connection: 400 V / 50 Hz Vacuum pump flow rate: 40 m³/h Tank capacity: 100 l Natural rubber membrane with 700% elasticity Maximum component height: approx. 600 mm External dimensions: approx. 3,600 × 1,850 × 1,000 mm Chassis with 4 swivel castors Weight: approx. 440 kg Location: Rebgeshain Sale from this location, without transport. Loading/collection by arrangement. Price: €6,500 net, negotiable Sale exclusively to business customers. Used machine sold as seen, with exclusion of warranty for material defects. No guarantee. Subject to prior sale.

Year of construction: 2001, condition: used, machine/vehicle number: 010786, -2x Autoclave Getinge GE 2606-1 Gkslowx Hwaohccqkja -2x Steam generator Getinge 50 liters – 56 kg/h -2x Vacuum pump Sterling SIHI Lema 90 AZ

Condition: good (used), Opportunity: 2x Pfeiffer Classic 590 available! Price: EUR 99.500/piece. Configuration Coater 1: 2x Pfeiffer TPH 2301 (2300ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Gkelehwv Tfshccqkoa Notes: Currently used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc) Configuration Coater 2: 2x Pfeiffer TPH 2201 s p c (horizontal turbo 2200ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Current used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc)

Year of construction: 1989, condition: ready for operation (used), For the deposition of thin metallic layers in the nanometer range, of different materials, cathodes chrome and copper,1 chamber, rotating basket, pre-pump set, turbo pump, hot and cold water supply for heating and cooling of the plant, Cooling plant L&R Kältetechnik WHK-15-W, year of construction: 2004, Gjlhccehwm Iisqkjka High voltage source ADS Maris, control cabinet, with control Siemens, complete plant control retrofit, year of construction: 2004

Condition: used, Controller TMP process chamber Gelhjuhcpyjccqkoka Controller TMP for wafer handler/10pos. cassette front loader 5KW DC power supply (AE) 5kW RF power supply (Huettinger) Process pump Leybold D65 + 250/500 roots blower Vacuum handler for cassette system 1x 1000ls turbopump Leybold 1x LN2 / meissner stage

Condition: new, Pfeiffer air cooler €100 per unit 20 units available Gkjlsd Sz Dtehccqkoa PM Z01 363A

Condition: new, New Aircooling kit, Pfeiffer PM Z01 300 AT €100 per unit Gkjlhsd Sz Dzoccqkja 15 units available.

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 17-K-4, Complete package consisting of: 1 x MTT 5/04 VARIO 17-K-4 (functional) 1 x MTT 5/04 VARIO 17-K-4 (spare parts carrier) Gjlhccqjzd Am Ejkjka 2 x Convection drying cabinets VGO 710 SR For sale is a complete vacuum casting system consisting of a functional MTT vacuum casting machine, type 5/04 VARIO 17-K-4, an identical machine as a spare parts carrier, and two convection drying cabinets VGO 710 SR. System description The MTT vacuum casting machine offered was used for the production of precision components and small series in the vacuum casting process. The main machine is functional. In addition, an identical machine is included as a spare parts carrier. Scope of delivery - 1 x MTT vacuum casting machine 5/04 VARIO 17-K-4 (functional) - 1 x MTT vacuum casting machine 5/04 VARIO 17-K-4 (spare parts carrier) - 2 x Convection drying cabinets VGO 710 SR - Visible accessories and system components as shown in the photos Condition Used industrial standard. The functional system was in operation. Age- and usage-related signs of wear are present. Inspection is possible by appointment. Sale exclusively as a complete package. The system is sold ex-works. Dismantling, loading, collection, and transport are the responsibility of the buyer at their own cost and risk.

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 675 kg, lifting height: 3,800 mm, lifting power: 350 kg/m, Equipment: CE marking, === MAIN SPECIFICATIONS === Model: Smartgroup SG350 Year: 2025 (Demo machine) Operating condition: Demo / as-new Lifting capacity: 350 kg Maximum lifting height: 3,800 mm Own weight: 675 kg Traction: 1WD rear-wheel drive Speed: 5 km/h Dimensions (L × W × H): 1.80 × 0.75 × 1.85 m Batteries: 4 × 105 Ah AGM Charger: Integrated onboard charger Overload warning system: Yes Proportional controls: Yes Pick & Carry capability: 350 kg Turning radius (lateral): 2.1 m CE certification: Yes === HIGHLIGHTS === • Demo machine from 2025 – excellent condition • Compact, lightweight and highly manoeuvrable (only 675 kg) • Strong pick & carry performance with 350 kg capacity • AGM battery pack with integrated charger – plug & play operation • Proportional control system for smooth and precise movements • Overload warning system for improved safety • Ideal for glazing, construction, installation, warehouse and industrial use • CE-certified and ready for immediate operation === CONDITION === Demo condition – used only for demonstrations. Fully inspected and tested by certified technicians. No damage, no faults, 100% functional. === LOCATION & DELIVERY === Gkelhccexwm Rueqkja Located in Sittard, The Netherlands. Worldwide delivery available. Price: €22,250 excl. VAT (EXW Sittard). === DELIVERY === • Crane loading available on request • Worldwide transport arranged by Collé Rental & Sales • All shipments handled professionally with full CE documentation

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, R104 X Product number: 4031600006 Geljw D Upzohccqkjka The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Originates from a cleanroom manufacturing process, plastic granules. Industrial vacuum cleaner for compressible material. The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. • Reduces downtime through continuous cleaning • Compression and easy removal of the collected material • Dust removal from the work environment • Recycling of trimmings • Flexible due to different performance classes • Container sizes, maintenance-free • Simple monitoring • Unattended operation possible. Nilfisk industrial vacuum cleaner R104 V 4031600000 Article number: NILFISK-4031600000 R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Industrial vacuum cleaner for compressible material The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop.

Condition: new, Year of construction: 2021, functionality: fully functional, V-motion classic vacuum lifting device with slewing jibLoad capacity: 250 kg Overall height: 3.8 m Gslhey R D Hijccqkoka Lower edge of jib: approx. 3 m Reach / Outreach: 4 m Slewing range: 250° Suitable for horizontal and vertical material handling. Excellent for commercially available flat sheets and panels (MDF from 8 mm thickness). A pneumatic tilting device supports the operation of the unit. The tilting range is within 90°. The vacuum is generated by an ejector using pneumatics. Details: - Lifting speed: chain hoist, 0–10 m/min - Lifting height: 2 m - Chain length: 3.5 m - Operating pressure: 7 bar (filtered compressed air required) - Air consumption: 11 Nl/s

Year of construction: 1983, condition: used, machine/vehicle number: 80295, load bearing: 300 kg Gkolhcs Rw Nqjcqkoa weight: 550 kg height of constuction: 1000 mm

Condition: new, carrying capacity 250 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport. Gjlsnlb Rwjhccqkjka

Condition: new, carrying capacity 1000 kg number of suction cups 8 suction cup dia. 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, oil-lubricated rotary vane vacuum pump with a Suction power of 21 m³/h and an ultimate vacuum of 98% (20 mbar). - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Gkelhcsnlb Rzjcqkea Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, carrying capacity 500 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 Gkslheq Sc Aujccqksa - Packing for truck transport.

Condition: new, carrying capacity 500 kg. number of suction cups 6 Stück suction cup dia. 215 mm 0 8.0 m³/h tool adaptor Kranöse 80.0 mm voltage 400 V total power requirement 0.18 kW weight of the machine ca. 120 kg dimensions of the machine ca. 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the center of the traverse - Sturdy metal case for your crane control - Operation "suction / release" by hand slide valve - Control and safety device for vacuum lifters * Robust control box. * Contactor circuit for the vacuum pump * Safety warning device with audible alarm * Vacuum gauge with danger zone indicator * Large vacuum storage tank with safety check valve * Double actuation when releasing the load - Fine dust filter to protect the vacuum pump Gkslhccexak Ddeqkja - Documentation * Special accessories included: - 6x ball valves to switch off individual suction cups * so that smaller formats can also be lifted * without having to move suction cups or traverses - Spiral connection cable small helix * with an extension length of 3,500 mm, version as * Extension cable with CEE plug and coupling * is routed to the lifting device next to the load chain