Used Schenck Balancing Machine for sale (17)

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) Lodpfx Asx Ein Ssf Sjhr The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: used, functionality: unexamined, machine/vehicle number: S/N: 002815GL, 8x Schenck load cells SENSiQ® RTN – 4.7 t – C3 Used, good condition – S/N: 002815GL For sale are eight high-quality Schenck load cells of the SENSiQ® RTN type, each with a capacity of 4.7 tons and accuracy class C3. Lhjdpfx Afexyi Ale Ssr The load cells were removed from a fully operational system and are in good, used condition. They have always been handled with care and professionally dismantled.

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Lhjdpfxswgnu Nj Af Sor Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Condition: excellent (used), The Schenck TB Comfort is a horizontal hard-bearing balancing machine, designed for high-precision balancing of turbocharger rotors, in particular turbine wheels with shaft as well as compressor wheels. It covers a wide range of speeds and rotor sizes, with a maximum rotor power of 200 W and a maximum rotor diameter up to 350 mm. Ledpfxew N Rg Es Af Sjhr

Condition: ready for operation (used), Year of construction: 1999, Balancing machine for balancing crankshafts Automatic feeding belt with internal loader Separate measuring and drilling stations Lhsdpsv I Airofx Af Ssr Balancing machine for crankshafts Automatic feeding belt for internal loader Separate gauging and drilling stations

Condition: used, functionality: fully functional, Used Schenck Balancing Machine HU 9 T with used CAB 690 H measuring unit. The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Lhsdpfxsw Aaugj Af Ser Technical data: - Maximum rotor weight with roller bearings: 50 000 kg - Maximum weight for symmetrical rotor: 56 000 kg - Load capacity per bearing pedestal: 28 000 kg - Load capacity per T-slot pedestal: 28 000 kg - Minimum rotor weight: 2 500 kg (1000 kg) - Maximum diameter over machine base: 4 000 mm - Machine bed length: 15 000 mm - Adjustable roller bearing diameters: 125–270 mm , 450–900 mm - ABB electrical drive FC: 90 kW - 4-speed gearbox: approx.120–1400 rpm - Pneumatic locking for end drive - Electrically operated movable pedestals - Accuracy: Umar 0,5gmm /kg 270 rpm 1000 gmm

Condition: ready for operation (used), Year of construction: 1986, Offered is a tensile testing machine year 1986 including hydraulic clamping jaws, load cell: PM 630 Rn, measuring-control unit: Doli EDC 580, nominal load: 600kN, clamping head distance: 150mm-650mm, piston stroke: 500mm, spare clamping head, machine dimensions X/Y/Z: 850mm/600mm/3200mm, machine weight: approx. 3500kg, calibrated annually. Inspection is possible by arrangement. Lsdpfx Aexz Ewzof Sohr

Condition: used, functionality: fully functional, Various used exciter motors in stock; all function tested; brands: Schenck, Siebtechnik, Joest Ljdsxywqkopfx Af Sehr

Condition: new, “UNUSED – Krupp 1.700 x 8.000 mm with DU 3 Unbalance Exciter“ for Sale Also many other manufacturers like: Schenck / Siebtechnik / Cyrus / Binder Find our complete stock on our website. Manufacturer: Krupp Size: 1.700 x 8.000mm Unbalance Exciter: DU 3 (on top) Lhodpfjggfkqjx Af Sjr Included: – Electrical Motor – Cardan shaft – Rubber Bumpers

Year of construction: 2010, condition: used, Crane scale Schenck 1000 kg Lhodpeiwurgofx Af Ssr

Condition: excellent (used), Year of construction: 2014, workpiece weight (max.): 16 kg, input voltage: 230 V, year of last overhaul: 2025, SCHENCK TBsonio High Speed Balancing machine for turbocharger core assemblies Ljdpjq Nin Usfx Af Sohr

Year of construction: 2007, condition: as good as new (ex-display), “UNUSED – Schenck SLG 2.500 x 5.700 mm“ for Sale Find our complete stock on our website. Manufacturer: Schenck Type: SLG Size: 2.500 x 5.700 mm Deck: 1 Lsdoglvw Ispfx Af Sjhr Fert. No.: VO35406.A01 Year of Manufacture: 2007

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 5 kg, total width: 360 mm, total length: 700 mm, Universal dynamic balancer for rotors from 10g - 5kg Ledpfx Aouh Svpef Sshr

Year of construction: 2019, condition: like new (used), “Unbalance Exciters / Erregers“ for Sale Over 60 Pcs. of Unbalance Exciters in stock! Unused, Good Used and Overhauled! From Manufacturers like: Schenck, Jöst, Krupp, Siebtechnik, etc. Schenck: – Schenck D 00 – Schenck DF 2 – Schenck D 3 – Schenck DF 3 – Schenck DF 300 S – Schenck DF 401 S – Schenck DF 5 – Schenck DF 5L – Schenck DF 5S – Schenck DF 5V – Schenck DF 501S – Schenck DF 501V – Schenck DF 7 Siebtechnik: – Siebtechnik GR 2 – Siebtechnik GR 3 – Siebtechnik GR 30 – Siebtechnik GR 32 – Siebtechnik GR 31 – Siebtechnik GR 40 – Siebtechnik GR 41 Krupp: – Krupp DU 1 – Krupp DU 2 – Krupp DU 200 – Krupp DU 3 Jöst / Mogensen: – Jöst JR 200 – Jöst JR 206 – Jöst JR 208 – Jöst JR 400 – Jöst JR 408 – Jöst JU 6 - Jöst JU 600 – Jöst JR 600 – Jöst JR 608 – Jöst JU 800 Honert: – Honert H 2 U 20 – Honert H 2 U 40 – Honert H 2 U 50 Friedrich / Cyrus – Friedrich UE 20 S Lhodpfjglvviox Af Sor – Friedrich UE 45 UHDE: – UHDE P 1500

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 10 kg, input voltage: 230 V, year of last overhaul: 2023, SCHENCK Highspeed Special Balancing Machine Type 110 MBRS for turbocharger core assemblies a for service, repair shops as well as research and development departments. The correction of the static unbalance can be performed inside the balancing machine on the compressor wheel side directly on the machine. Max balancing speed 250,000 rpm Ljdpfx Afsq I Rz Re Sehr

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 400 V, rotor diameter: 600 mm, year of last overhaul: 2023, power: 1.1 kW (1.50 HP), Balancing machine upgraded in 2009. 1 Machine base, welded construction 1 Balancing unit Vertical, single plane, permanently calibrated, 1 special spindle with centric flange 1 piezo-electric vibration sensor 1 3-phase drive motor of 1.5 kW, driven by a belt 1 Protractor disk 300 mm diameter, with 360 °, mounted on the spindle 1 Safety guard For diameters up to 600 mm and heights of 420 mm 1 SCHENCK CAB 803 measuring device - With direct data entry system via touch screen Lhodpfxeq Umcrj Af Sor - Industrial PC with active TFT color monitor - Visualization of results via vector meters - Network capability - Polish dialogue - Modular, easy-to-use system design - Optimized signal processing system via digital Schenck MMD filter - Intelligent, self-diagnosing measurement electronics system - Operation using standard Windows routines - Programs for: - Straight compensation, keyway, compensation index - Tolerance calculation according to ISO 1940 - Log report in PDF format Balancing speeds from 0 to 720 RPM - Smooth Max residual unbalance 5 - 10 gmm (DIN 1319)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 1,260 mm, total length: 1,500 mm, Universal dynamic balancing machine for rotors from 3 - 300kg. CAB803 measuring system, class C protection, CE mark Ledpfsu Nmppex Af Sshr