Isi-Tan Cooling

Year of construction: 2022, condition: excellent (used), Nolden hot runner controller (54) 16 channels, soft start, complete with cables + manual, 2022 Gedpfx Aezcx Anonxebn

Year of construction: 2006, condition: used, Oil temperature control unit Gsdpfxozcavps Anxjbn Year: 2003 – like new Medium: Oil Maximum temperature: 300 °C Heating capacity: 6 kW Maximum flow rate: Up to 60 l/min High-flow pump: The FM25 immersion pump ensures high flow rates of up to 60 l/min to maintain uniform temperatures across the mold. Cooling circuit: Equipped with an integrated direct or indirect cooling system (often denoted as 1K) capable of handling cooling capacities up to 70 kW at 280.

Year of construction: 2003, condition: used, Oil temperature control unit Year: 2003 – like new Gedpfozcat Usx Anxobn Medium: Oil Model: TT-288 / MP794 Up to 250°C Cooling capacity approx. 60 kW at 250°C

Year of construction: 2003, condition: used, Brand: TOOL TEMP Stock: 1 Gbsdjzcanxjpfx Anxsn Year: 2003 Power: 7000 W Water filling tank: approx. 150 litres With circulation pump Overall dimensions: 1350 x 800 x H 1550 mm Cooling capacity: approx. 25 kW

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, Two double-temperature control units from the company Single are for sale: Medium: Water Gsdpfx Anezbx Rpexebn Heating capacity: 9 kW per unit Cooling capacity: 20 kW per unit Mobile Interface: PT 100 sensor Alarm

Condition: used, circulating medium 25 °C Cooling capacity 10 kW Rated power supply 5,45 kW Operating/control voltage 400-415/24 V / 50 Hz Rated current/max. fuse 15,2 / 25 A The temperature control units are, in our assessment, in good used condition. The offer includes two units. Accessories, tools, and clamping devices shown are only included if Gbjdpfxezbc Hbj Anxjn specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2014, operating hours: 150 h, condition: as good as new (ex-display), The temperature control unit from GWK is for sale; it was only used at trade shows. I can gladly send you a description of the unit! Medium: Water Heating capacity: 9 kW Operating temperature: max. 160 degrees Celsius Cooling capacity: 40 kW Gedpfx Anjza U Dcexsbn Cooling: Heat exchanger Mobile

Year of construction: 2008, condition: excellent (used), functionality: fully functional, PSG Hotrunner Controller 8 fases In very good condition Gedpfoza H Elsx Anxsbn Included 24-pin Cable

Condition: ready for operation (used), 12 kW, 140 degrees Celsius. Three units in stock. Warranty: 6 months. Gedpezab S Hefx Anxjbn

Condition: ready for operation (used), 27 kW, 90 degrees Celsius Gbjdpfx Anezab Sysxsn Two units in stock. Warranty: 6 months.

Condition: ready for operation (used), 9 kW, 150 degrees Celsius Two units in stock Warranty: 6 months Gedjzab A Ejpfx Anxjbn

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, overall weight: 50 kg, type of input current: three-phase, power: 12 kW (16.32 HP), year of last overhaul: 2026, Type: TP-DIRECT: 120 Power: 12 kW Maximum operating temperature: 120 °C Gsdpfx Anjy Uvwboxsbn Medium: Water Temperature control unit Three units available Price: 700 EUR per unit

Condition: used, Manufacturer : SISE Model : 95E27 DC95 Type: Hot water heat controller Gbedoy Ufitopfx Anxon Heating capacity: 28.1 kW Cooling type: 60 kW plate heat exchanger Recirculation: immersed pump Maximum temperature: water 95°C Process inlet and outlet connection: 1¼" Technical file available

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Gbjdpfjy Uddpex Anxsn Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Gbjdpfoy Uddcsx Anxon Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Three temperature control units from GWK are for sale: Temperature control unit CS 90 with touch screen - Temperature range up to 90°C (water) Godpfx Ansy T D Nvoxebn - Robust steel sheet housing - Unit on castors - Heating power 9 kW - Automatic water refill - Electrical level control - Indirect cooling system, cooling coil - Connection cable with 16 A CEE plug

Condition: good (used), functionality: fully functional, Removed from an operational machine. Gbsdpfxjy Txfre Anxon 4 pieces, including cables, housed in a casing.

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Gbjdpsy Su Efofx Anxsn

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Gbsdpfsy Su D Uex Anxsn

Condition: used, machine/vehicle number: 462962, Temperature control unit from manufacturer Regloplas, used and untested. The unit is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates as a single-circuit system with the RT 45 control system. Oil is used as the medium, with a maximum flow temperature of 250 °C. The heating capacity is 13.7 kW, and the pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 145 kg. Gedpfxey Su D Io Anxjbn

Condition: used, machine/vehicle number: 543105, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Gbsdpfx Anoy Su Dnoxsn

Condition: used, machine/vehicle number: 543109, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Gedpfx Asy Su Dhenxjbn

Condition: used, Year of construction: 2002, machine/vehicle number: 802287/01, Temperature control unit from manufacturer Remak, used and untested. This unit is designed for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with the REMAK control system. Water* is used as the medium, with a maximum supply temperature of 95 °C*. Heating capacity is 13.5 kW*, and pump performance is 66 l/min & 4.0 bar*. Year of manufacture: 2002, total weight: 90 kg. Godey Su Dbepfx Anxebn

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Gjdpfx Aey Su A Ronxsbn

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Gbedpfx Ansy Su Aqexon