Borak Solutions

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 60 mm, total length: 3,390 mm, total width: 1,480 mm, total height: 1,790 mm, workpiece weight (max.): 300 kg, overall weight: 2,800 kg, working height: 900 mm, input voltage: 400 V, warranty duration: 24 months, protection type (IP code): IP42, passage width: 1,500 mm, Equipment: double-sided, The SBM-L G1S2 EVO grinding and deburring machines were developed for deburring on both sides and edge rounding of workpieces in one operation. The LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts and stamped parts. The L series is equipped with three units each on the top and bottom. The processing of stainless steel, steel, aluminum or non-ferrous metal workpieces can be done either on the upper side, the lower side or on both sides. Two-sided sheet metal processing and edge rounding in one operation gives time savings of up to 60%. It is also possible to easily connect automation solutions or to integrate them into production lines. The machine concept ensures ergonomic operation and a pleasant working environment without pollution, dust and noise. working width max. 1000 / 1500 / 2000 mm workable material thickness - 0.5 - 60 mm load - 300 kg/rm voltage - 400 V / 50 Hz network structure - 3~ PEN / 3~ PE+N total current consumption - 43.7 A / 43.7 A / 43,7 A total power - 19.2 kW / 19.2 kW / 19.2 kW Bjdpfxeziar Ao Ab Nedd insulation class - IP 42 infinitely variable feed speed - 0-4 m/min. adjustment of material thickness - electric adjustment of tools - electric weight approx.2500 / 2800 /3200 kg dimensions (W/D/H ) approx 2890/1480/1790mm 3390/1480/1790mm 3890/1480/1790mm Double-sided deburring and edge rounding of punched, laser and plasma blanks More than 60% reduction in throughput time thanks to double-sided processing Up to 70% energy savings compared to conventional grinding/deburring machines LISA - The LISSMAC Set-Up Assist guides the operator automatically/without prior knowledge to the desired processing result 13.3" FullHD touch panel with intuitive operator guidance Simultaneous deburring and edge rounding on the external and exterior contours Double-sided processing eliminates costly material handling (e.g. turning of components) and time-consuming parts logistics One-sided machining possible by simply deactivating units (also for components that cannot be machined on conventional machines) Optimum tool utilisation across the entire working width due to transverse machining principle Quick and easy tool change within minutes with automatic reference run Maximum productivity with optimum and consistent machining quality Maximum productivity with optimum and consistent machining quality Small footprint due to compact design Modular and compact in modern machine design - smaller footprint Robust design and good accessibility reduce maintenance to a minimum Improved working environment due to reduced dust, dirt and noise levels

Condition: like new (used), functionality: fully functional, SBAVATRICE A NASTRO PER LAMIERA usata, FIM-SCHIAVI (GECAM-FINTEC 844). Bdsdpfjzhuiasx Ab Ned

Condition: used, functionality: fully functional, FRESATRICE usata A TESTA VELOCE LAGUN ISO 40 CON TESTA UNIVERSALE.CON ANCHE L' ACCESSORIO DELLA TESTA UNIVERSALE "TIPO HURON". Dimensioni tavola 1370x280 mm Cave a T n. 3 Corsa asse X 850 mm Corsa asse Y 350 mm Corsa asse Z 400 mm Corsa slittone 570 mm Attacco cono mandrino ISO 40 Corsa canotto mm 127 Diametro canotto mm 86 Velocità mandrino Rpm 60-4200 Rpm Inclinazione testa destra sinistra 90 gradi Inclinazione testa avanti indietro 45 gradi Motore principale 4 Hp Bedpfxezht N Se Ab Nodd Peso massimo sopportabile sulla tavola 250 Kg Peso netto approssimativo 1650 Kg

Condition: used, functionality: fully functional, FRESATRICE usata A TESTA VELOCE FIRST ISO30.CON AVVITATORE GANCIO/SGANCIO PNEUMATICO ED IMPIANTO LUBRIFICAZIONE AUTOMATICO GUIDE. Bdjdpszht Nlsfx Ab Nsd

Condition: good (used), Year of construction: 2011, Used deburring machine from TimeSavers with a return conveyor belt. Type 42-series-1350-RB Rotary brush deburring machine Width 1350 mm Equipped with a return conveyor belt to the operator Includes dust extraction system. Bedpfx Abozhbigs Nsdd

Condition: used, Year of construction: 2016, Operating hours of the machine: 1271 h Maximum feed width: 600 mm Processable sheet thickness: 1-120 mm Working height, constant: 850 mm Voltage: 400 V (50 Hz) / 480 V (60 Hz) Rated current: 30 A Rated power: 17 kW Protection class: IP 42 Feed rate, continuously adjustable: 1-4 m/min Depth: 1930 mm Bdedpfxszg U Sle Ab Njd Width: 1600 mm Height: 1550 mm Machine weight, approx.: 2200 kg With the Pluto, you are opting for a compact machine for deburring parts cut with oxy-fuel and plasma processes. Features: - Tolerance and distortion compensation up to 6 mm - Durable steel wire brushes for edge finishing - Magnetic clamping system across the entire working width - Heat-resistant conveyor belt made of chrome leather - Incl. extraction system

Condition: used, Year of construction: 2022, 2 x 400 mm magnetic track, EMZR (presumably an abbreviation, context needed for accurate translation), Bsdszd Nwdopfx Ab Nodd Tool wear compensation EE

Condition: used, Year of construction: 2024, operating hours: 76 h, machine/vehicle number: SN073545, Options: Bedpfozdcxisx Ab Nsdd - Conveyor belt cleaning - Interior lighting

Condition: used, Year of construction: 2024, operating hours: 26 h, machine/vehicle number: SN064871, Options: Bodpfxezdcxcj Ab Njdd - RFID chips LiServ 4.0 - Energy measurement package Balluf Smartlight ME 5000 - Barcode scanner

Condition: good (used), Year of construction: 2017, functionality: fully functional, working width: 225 mm, Used deburring machine with a sanding belt and cup brush for deburring. The conveyor belt has been replaced. The machine can be inspected while powered on. Bdodszbhd Sopfx Ab Nsd Available immediately.

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Bdodpfx Aoy Ugd Eeb Nod

Condition: excellent (used), Year of construction: 2013, Year of manufacture: 2013 Bedpfx Aboy Tu Dke Nedd Series 2200

Condition: used, Year of construction: 2012, max. working width: 1000 mm workable material thickness: 0,5 - 50 mm Total power: 82 A Total current consumption: 44,5 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg Bdedpfx Absy Sp Hde Njd Standard configuration SBM-M D 1000:Two-side slag removal of plasma and thermal cut sheets up to 120 mmSaving of tool costs incurred by mechanical deslagging –no time-consuming and expensive grindingTwo-side slag removal saves the time intensive turning of the often very heavy workpieces or machining of parts twiceUp to 60 % work time savings compared to one-side processing machinesModular and compact in modern machine design - smaller footprintDry operationThe cross-machining principle guarantees uniform tool utilisation over the entire working er and lower assemblies separated can be adjusted or turned on and off electricallyInnovative tooling and material feed system allows for optimum handling of burrs and uneven surface of piecesMaximum productivity while maintaining machining qualityImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Systems; Material Handling; Robotics & Automation; Processing Tools SBM-XL 1000:Deburring and edge rounding of parts up to 120 mm material thicknessProcessing both sides of the parts simultaneously eliminates the need of turning heavy parts and processing them for a second timeSimultaneous deburring and edge rounding on interior and exterior contoursDry operationSimple, intuitive operationThe processing units can be individually adjusted or turned on and off imum productivity while maintaining machining qualityThe cross-machining principle guarantees optimum tool utilisation over the entire working ter and simpler tool change within just a few minutesModular and compact in modern machine design - smaller footprintImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Technology; Handling Systems, Automation; Custom SolutionsFor repeated customer requirements, processing parameters can be called up quickly and easily through predefined to 60 % work time savings compared to one-side processing grinding machines Extended machine accessories - 2 x dust extractor - 2 x conveyor belt

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 950 mm, sheet thickness (max.): 120 mm, working height: 120 mm, control type: CNC control, Equipment: CE marking, TECHNICAL DETAILS Station 1: Sanding belt Station 2: Rotary brush Station 3: Rotary brush Min. sheet thickness: 0.5 mm Max. sheet thickness: 120 mm Working width: 950 mm Working height: 0.5-120 mm MACHINE DETAILS Bsdoy Hhp Tspfx Ab Nodd Power: 39 kW Control: CNC Number of stations: 3 Dimensions & Weight Dimensions (L x W x H): 3,940 x 1,980 x 2,010 mm Net weight: 7,000 kg Transport packages: 4 EQUIPMENT CE marking

Condition: used, Year of construction: 2025, operating hours: 630 h, functionality: fully functional, - 12-month warranty Equipment: - Powergrip - 2 x 400 mm magnetic track Bodpfx Abey Ar Dgj Njdd - Interior lighting - Belt drive control for the R-unit

Condition: used, Year of construction: 2008, operating hours: 1,019 h, functionality: fully functional, machine/vehicle number: 93.437.268, working width: 1,350 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 7,085 mm, total width: 2,020 mm, total height: 2,295 mm, overall weight: 4,800 kg, working height: 850 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, power: 55 kW (74.78 HP), table height: 850 mm, grinding width: 1,350 mm, input current: 100 A, Equipment: documentation/manual, For sale is a reliable Weber NLC 1350 wet grinding machine from 2008. This machine is specifically designed for high-quality surface finishing of laser-cut, punched, and nibble parts. Thanks to wet grinding technology, excessive material heating is prevented, ensuring consistent results with high precision. Highlights & Features: Precision: Consistent working height and robust modular construction. Versatility: Suitable for deburring, edge rounding, and descaling of both thin and thick sheet metal. Safety: Wet grinding binds grinding dust and increases safety in the production process. Bdodjy Ar A Nspfx Ab Ned Control System: Intuitive user interface for rapid changeover. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 3,100 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 2,300 kg, nominal power: 23.5 kW (31.95 HP), 12 months warranty, 1800 operating hours Bsdsyw Hhvopfx Ab Njdd

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. Bdsdpfx Asyt Nm Ejb Ned The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. Bjdsyt Nhvjpfx Ab Nsdd You can view this machine in our showroom in Bergeijk.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, working width: 200 mm, sheet thickness (max.): 100 mm, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has only been used as a test model and is therefore in excellent condition. You are always welcome to visit our showroom in Bergeijk to take a look. 2024 Deburring and Finishing Machine F200 XL with vacuum support. Suitable for deburring, rounding, and/or grinding steel cut parts up to 200 mm wide. Discover the advanced F200 XL finishing machine. Bedpfxsyt I U Us Ab Nedd All products, from a euro coin to 200 mm wide, can be processed on this small but powerful machine. At the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by two oscillating cup brushes that apply light pressure. The brushes ensure a uniform rounding of all edges and holes, both around and within the flat-ground product, leading to the most optimal finish. The F200 XL offers options for automatic brush calibration, which ensures constant consistency and precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future! We can now offer you this F200 XL - VAC showroom machine, manufactured in 2024, which can optionally be combined with a WES3000 wet-dust extraction unit and associated piping. Available only until it is sold. The machine is supplied with a 1-year warranty, excluding wear parts. Delivery is ex works Bergeijk. If desired, we can also offer the machine including transport, installation, and training of your operators on-site. We also have a lightly used F200 XL machine with magnetic product fixation available, manufactured in 2023. This machine can be viewed in the showroom in the Netherlands. Contact us, and we will send you an interesting offer.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 80 h, functionality: fully functional, machine/vehicle number: 2623-43, working width: 1,100 mm, sheet thickness steel (max.): 100 mm, Edge Processing Machine Timesavers 32 WRBW - Demonstration machine, year of manufacture 2025 - Vacuum table for processing mixed materials - Automatic table cleaning - Deburring unit - Edge rounding unit - Finishing unit - Can be offered as a complete system with extraction - Installation and training by in-house service personnel Bdjdpfxjytr Hno Ab Njd

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm Bedpfsynmw Rox Ab Njdd 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 74000 € 1398.6 € 1350 mm 0,5 - 170 mm 1370 x 2200 mm 4000 m³/h 200 mm 6 bar 78 (+/-2) dB 1750 mm 2100 mm 2180 mm 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 180 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/s 10 Grinding belt speed m/s 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 20 Oscillation stroke mm 15 Rotation motor power kW 5,5 Revs 1/min 300 - 1000 Oscillation motor power kW 0,37 Grinding brush speed m/s 10,0 ACCESSORIES: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5.580,00 with Wire Brush 0,3 mm € 5.900,00 R GROUP - GRINDING BELT Motor 15 kW € 1.060,00 OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1.290,00 Conveyor belt with vacuum system - 3,0 kW - 300 mm wide € 4.780,00 2 additional PVC coated rollers on infeed and outfeed side € 2.040,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4.510,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 4.030,00 magnetic conveying system - 2 groups, 200 x 200 mm € 13.520,00 Demagnetiser € 4.940,00 THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H. Bdedpsynmwkofx Ab Njd

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,100 mm, type of input current: three-phase, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness copper (max.): 50 mm, sheet thickness brass (max.): 50 mm, total length: 2,000 mm, total width: 2,590 mm, total height: 2,150 mm, overall weight: 2,500 kg, input voltage: 400 V, warranty duration: 12 months, table width: 1,100 mm, workpiece height (max.): 50 mm, power: 13 kW (17.68 HP), workpiece width (max.): 1,100 mm, pass-through width: 1,100 mm, DM1100 2C Working capacity (mm): 1100×50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2-8 Feed speed (m/s): 0.6-3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13 Current consumption (A): 30 Dust extraction port per head (Ø mm): 220 Bdedpfx Abjyiyhle Nsd Dimensions (mm): 2000X2590x2150 Weight (kg): 2470

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 12 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. Rolling bruh rotation speed: 8-26 m / s Rolling brush public speed: 1-15 rpm machine thickness servo adjustment precision: 0,01 mm Length: 3800 mm Width: 2300 mm Height: 2400 mm Machine weight: 5500 kg Electrical connected load: 49,5 kW Bsdpfjygx A Nox Ab Njdd Standard configuration Machine configuration:1st station: Sanding belt2nd station: Brush elements Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Extended machine accessories Optional feeding mode:1. Feeding with strong permanent magnet adsorption transport (suitable for steel workpieces. Workpiece size ≥ 30 mm × 30 mm)2. Feeding with vacuum negative pressure adsorption transport (suitable for stainless steel plates, copper plates, aluminum plates, etc.) that cannot be magnetically adsorbed. Workpiece size ≥ 50 mm × 50 mm)