Numa

Condition: used, Year of construction: 1999, turning length: 1,000 mm, turning diameter: 500 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, capacity 1000x570 mm, spindle bore 80 mm, Multifix turret, Siemens control Nljdpjy E Hvvofx Ah Nea

Condition: not inspected (used), Year of construction: 1999, turning length: 920 mm, turning diameter: 550 mm, overall weight: 8,100 kg, fanuc OT distance between centers 920 mm swing over bed diameter 650 mm Nlsdpsy E Htuofx Ah Nsa turning length 900 mm turning diameter 550 mm 10-position turret chip conveyor

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 110532, turning length: 1,980 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, turning diameter over bed slide: 600 mm, controller model: Siemens 840DSL mit ShopTurn, TECHNICAL DETAILS Swing diameter over bed: 600 mm Distance between centers: 2,000 mm Turning length: 1,980 mm Spindle bore: 105 mm Speed: 2,500 rpm Power: 18.5 kW MACHINE DETAILS Control: Siemens 840DSL with ShopTurn Nljdpoy Ex Hmofx Ah Nea Number of gear stages: 2

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Nodpfx Ajy Ed Ebeh Njla Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160 mm Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Nsdpjy Ed Ddofx Ah Nsla Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Nice Microcut Challenger lathe turning over bed 550 mm in gap 770 mm over slide 320 mm Center length 1500 mm Control Siemens 810D Chip conveyor Coolant equipment Multifix toolpost with 10 holders Fixed steady Nledpfx Ahoy D Tale Nsa Travelling steady 3 jaw chuck manual All manuals present

Condition: excellent (used), Year of construction: 2012, Control: Fanuc 0i-TD Equipment: - various tool holders - various driven tools - C-axis, driven tools Max. turning diameter: Ø 500 mm Nledpfx Aoy Dqb Tjh Nja Max. turning length: 600 mm Bar capacity: Ø 75.5 mm Spindle speed: 3500 rpm Spindle nose: A2 - 8 Machine weight: 6,700 kg

Condition: good (used), For sale: High-performance dual-spindle CNC lathe Biglia B.750-YS. This versatile machine combines power and precision at a millimeter scale, ideal for complex machining of medium and large workpieces. Nlodpfx Ahsy Dpu Sj Noa Brand: BIGLIA Model: B.750-YS (with Y-axis and sub-spindle) Year: 2020 Control: Fanuc Series 32i-B with Dual Check Safety Key features: Bar capacity: Ø 80 mm (maximum capacity Ø 93 mm) Maximum turning diameter: 552 mm Turret: 16 driven stations (speed 6,000 rpm) with direct-drive integrated motor for increased accuracy Travel: X=305 mm, Y=140 mm (+/- 70), Z=860 mm

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mm Turning length : 800 mm Mainspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:76 mm Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Ejector:Pneumatic Movement in Z:800 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:260/100/800 mm Eilgang in X/Y/Z:30/12/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:210/800 mm Eilgang in X/Z:30 m/min Nledjy A U Izopfx Ah Nsa Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 bar Rawmaterialfeed I:Robotinterface prepared Rawmaterialfeed II:Barloaderinterface prepared Finishedpartremoval:Workpiece unloading device with conveyor belt Oilmistseparation:Interface prepared Toolholder:Misc. static and driven toolholder Further Accessory:Automatic Door, Rinsing pistol

Condition: like new (used), Year of construction: 2018, turning diameter over cross slide: 520 mm, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 110 mm, spindle speed (max.): 2,000 rpm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, bar passage: 110 mm, Equipment: documentation/manual, CNC LATHE COMEV PICODUE EVO 260×1500 – Year 2018 – Operational – Turin (TO) Flat-bed CNC lathe COMEV Picodue EVO, model 260×1500, year 2018 (serial number 8051), in good condition and fully operational. One-piece cast iron construction with induction-hardened and hand-scraped prismatic guideways. High-quality Italian manufacturing. Available for inspection and testing by appointment in Turin. Nlsdey A Typopfx Ah Nea Main technical specifications: • Max swing over bed: 520 mm • Max turning diameter: 260 mm • Max swing over carriage: 285 mm • Distance between centers: 1,500 mm • Spindle bore: Ø 110 mm • Spindle nose: Cam Lock 8" (A2-8") • Spindle speed: 0 – 2,000 rpm (stepless) • Motor power: 12.5 kW (16.8 kW peak) • Rapid traverse X / Z: 10 / 10 m/min • Precision ground and preloaded ballscrews: ISO 5 – zero backlash • RAPID Original quick-change turret – 4 positions • CNC control: Z32 Delectron / COMEV • 15" color touchscreen display • ISO / conversational / teach-in programming • Connectivity: USB – network – remote diagnostics • 2 controlled axes: X – Z • CE compliant | Year: 2018 Machine available for inspection and testing by appointment.

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC turning centre with driven tools, workpiece removal paddle, automatic tool alignment eye, chip conveyor, and material feeder. OSP-P300L CNC control system with 15” colour touchscreen panel Motor hours Power-on time: 65,458 h (as of 18.03.2026) NC operating time: 36,054 h Spindle running time: 19,533 h Cutting time: 16,582 h Nledpfx Aey A N Hxjh Nea Power consumption 33.1 kVA Max. swing diameter: 480 mm Max. machining diameter: 340 mm Max. turning length: 785 mm Collet chuck + 10” hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through cylinder SS 1770, draw tube Main spindle: JIS A2-6 spindle nose, bore diameter 80 mm, built-in motor Spindle speed range: 45 - 5,000 rpm Power/continuous rating: 22 kW/15 kW Continuously controlled C-axis, 3,600 s with 0.001° increments Sub-spindle Speed range: 50 – 6,000 rpm Power/continuous rating: 11 kW/7.5 kW Spindle nose diameter: 140 mm, bore 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6” hydraulic chuck B206-01, 3 sets of soft jaws (Schunk KM-WBL 62) Hydraulic through cylinder SS1243, draw tube Sub-spindle travel - NC axis W stroke for W450: 595 mm Spring-operated part ejector from sub-spindle W-axis overload monitoring (drive torque) Tailstock clamping in sub-spindle Turret head Number of tool stations: 12, fixed and driven BMT60 (not VDI) Tool mounting in. 25 x 25 mm Tool mounting out. diameter 40 mm Driven tools Drive power: 7.1/4.1 kW Speed range: 45 – 6,000 rpm Rapid traverse speeds Rapid traverse in X and Z axes: 25/30 m/min Rapid traverse in C axis: 200 rpm Travel distances X axis: 260 mm Z axis: 510 mm Y axis: 115 mm (+70 mm / -45 mm) Machine data Width: 3,330 mm – without feeder and conveyor Depth: 1,800 mm Height: 2,250 mm Machine weight: 5,250 kg Accessories: - OSP-P300L Advanced One Touch CF-M-E set includes: Coordinate transformation function Profile generation function Advanced One Touch IGF 3D machining process simulation Machining time overrun control Load monitoring (spindle, feed axes) NC operation monitoring (including part counting) Cycle time reduction function Hi-Cut Pro function Spindle speed control function - High-pressure cooling, max. 20 bar, max. 50 l/min - ILS material feeder type MUK 7012 with bar magazine 6-70 mm/1250 mm, built in 05/2014, manufacturer: Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. - FILTERMIST FX4002 extraction unit Machine equipment: - Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on main spindle) collets dia.(mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets dia.(mm): 55-60-65 - Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on sub-spindle) collets dia.(mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 - Holders: Axial tool holder – 5x Turning tool holder – 5x Cut-off blade holder – 2x Double-sided face driven holder – 3x Cross driven holder – 3x - Reducer adaptor tube (custom-made) - Reductions – nylon dia.(mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 06/2019 spindle repair due to defective bearings. 06/2025 replacement of control unit U4. 10/2025 replacement of control unit M. Repairs were carried out by the manufacturer’s (supplier’s) service technicians, replacement parts used were genuine after overhaul.

Condition: used, Year of construction: 2022, machine/vehicle number: L2E0253, CNC lathe Nodey Axr Rjpfx Ah Nela

Condition: used, Okuma LB45 Nledpoy Apqqjfx Ah Nsa

Condition: like new (used), PUMA 4100MB CNC Lathe (With Live Tooling) Max. turning diameter: Ø560 mm Max. turning length: 978 mm Bar capacity: Ø116 mm Chuck diameter: 15” (380 mm) X-axis travel: 352 mm Z-axis travel: 1105 mm Rapid traverse (X/Z): 16 / 20 m/min Spindle speed: 2000 rpm Nljdpfey Aikwex Ah Nsa Motor power: 30 – 37 kW Torque: 1600 – 2400 Nm Spindle bore: Ø117 mm Turret: 12 stations Tool type: BMT-75 Live tool speed: 4000 rpm Live tool power: ~23 kW ✔ 4 live tools in active use

Condition: good (used), Year of construction: 2000, Technical details: turning diameter 420 mm turning length 650 mm control Okuma OSP-U100L spindle bore 95 mm spindle turning speed range 2800 rpm travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. Spindle hours: 16.653 hrs. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring Nedpfx Ahsyzy Uks Nela - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, Equipment: documentation/manual, 🔷 TOPNC HMT-i500 – 5-Axis Turn-Mill Center Demo Machine – As New – Available at Short Notice – German Service For sale is a high-precision 5-axis turn-mill center TOPNC HMT-i500, used exclusively as a demo machine and in mint condition. This machine combines turning and 5-axis milling in a single setup – for maximum efficiency, precision, and reduced cycle times. ⚙️ Technology Concept ✅ 5-axis simultaneous machining ✅ Complete machining in one setup ✅ Torque motor direct drive (B-axis) ✅ Fully closed control loops (linear encoders) ✅ High rigidity machine structure (monolithic design) ✅ Thermally stable machine construction 👉 Result: highest accuracy + minimal non-productive times + maximum process reliability 📊 Technical Data (Excerpt) 🔹 Machining Max. machining diameter: 500 mm Max. turning length: 800 mm Bar capacity: Ø 74 mm Travel (X/Y/Z): 500 / 200 / 850 mm 🔹 Milling Spindle Speed: 12,000 rpm Power: 22.2 kW Torque: 45 / 54 Nm Taper: HSK-T63 Through-spindle coolant: Standard 🔹 Turning Spindle Speed: 3,000 rpm Njdjyywgbspfx Ah Nela Power: 30 kW Torque: 280 / 420 Nm Chuck size: 10" 🔹 B-Axis (Swivel Head) Swivel range: 240° Direct drive (torque motor) Torque: 360 / 685 Nm Holding torque: 1,500 Nm 🔹 Dynamics & Precision Feed rate X/Y/Z: 30 / 30 / 36 m/min Resolution: 0.001 mm / 0.001° 🔹 Tool Magazine Capacity: 24 tools Max. tool length: 300 mm Max. tool weight: 7 kg 🔹 Machine Dimensions: approx. 6000 x 2400 x 2300 mm Weight: approx. 8 t 👉 All data according to technical datasheet 🧠 Equipment & Features High-precision ball screws & linear guides Fully automatic central lubrication system High-pressure coolant + through-spindle coolant Chip conveyor + coolant system Tool measuring system & workpiece probe (optionally integrated) Automatic door Oil mist extraction Servo tailstock 👉 Designed for continuous industrial operation 🖥️ Control TOPNC rocOS (5-axis simultaneous) or Siemens SINUMERIK 840D sl 👉 Industry standard for demanding applications 🏭 About TOPNC / VECTRIX TOPNC Shanghai is one of the leading CNC manufacturers in China in the field of 5-axis and mill-turn technology. 👉 Represented in Europe by the VECTRIX Group GmbH 🇩🇪 German headquarters & service in Nordenham ✔️ Spare parts & technicians available in Germany ✔️ Fast response times ✔️ Long-term support 👉 No risk – structured industrial support in Europe 💡 Why this machine? Demo machine = as new + price advantage Immediately available – no lead time Fully equipped Perfect for demanding manufacturing (aerospace-ready, medical technology, etc.) 💰 Price List price: €455,000 👉 Special price for demo/stock machine: approx. €355,990 incl. installation Location: Germany Machine can be inspected under power We are happy to send you: Videos & machining examples Individual ROI calculation Technical consultation 👉 Inquire now – these machines are off the market quickly

Condition: used, OKUMA LB 200 M is a CNC turning lathe for high‑precision machining, accuracy and reliable operation. Capacities: turning Ø over cross‑slide 420 mm; swing over bed 530 mm; spindle hole 53 mm; max Ø 300 mm; travels Z 335 mm, X 180 mm. Specs: rapid traverse X 25 m/min, Z 30 m/min; spindle speeds 50–6000 t/min; 3x400 V 50 Hz; total power 16 kVA; weight ≈3300 kg; dims 2035×1720×1700 mm. Equipment: 12‑position fixed‑tool turret; tailstock Morse 4, spindle stroke 80 mm, Ø 55 mm. Enables tight tolerances; typical sectors: automotive, aerospace, medical, machine building. Nledpfx Aoyxnxxjh Nja

Condition: new, Centre height: 260 mm Centre distance: 1000 mm Swing diameter over bed: 520 mm Swing diameter over cross slide: 265 mm Bed width: 320 mm Spindle bore: 62/110 mm Nljdpfx Ajyxb Dnjh Nja Spindle mount: Camlock 6/8" Spindle speed range: 0 - 2000 rpm Spindle power: 10.7 kW Rapid traverse X/Z: 3 m/min Feed force X: 250 daN Feed force Z: 500 daN Dimensions (L x H x D): 2532 x 1506 x 1790 mm Weight: 2150 kg

Condition: excellent (used), Year of construction: 2018, turning length: 565 mm, spindle bore: 80 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, rotational speed (max.): 6,000 rpm, total height: 1,824 mm, total length: 2,800 mm, total width: 1,790 mm, CNC Lathe with c-axis Okuma - LB3000EX-II MACH-ID 9471 Make: Okuma Type: LB3000EX-II Control: OSP-P300LA Year: 2018 Tooling package with Tool Holders Axial driven live tools holders Radial driven live tools holders Kitagawa B210 3 Power Chuck Max. turning Ø: 580mm X-Axis: 260mm Z-Axis: 565mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW ATC / revolver: 12 Speed live tools:6000Rpm Chip conveyor: Yes Njdpfeywurpox Ah Nela Tool eye: Yes Hours: 4566H Pinole taper: 5Mk Length: 2800mm Width: 1790mm Height: 1824mm Weight: 4350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 550mm, swing over bed 950mm, Swing over cross-slide 715mm, spindle speed 3,500rpm, Nsdpfjywuibjx Ah Nela Y axis +80/-60mm, distance between centres 898mm, milling speed 12,000 rpm, main spindle bar capacity 78mm, 16 station turret, spindle power 40/25Kw, Fanuc I series control, 3 jaw chuck main, tool setter, swarf conveyor,

Condition: good (used), Year of construction: 1987, operating hours: 25,000 h, functionality: fully functional, turning diameter over cross slide: 550 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 90 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 10 rpm, spindle motor power: 22,000 W, total length: 4,510 mm, total width: 2,370 mm, quill stroke: 150 mm, overall weight: 9,500 kg, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Well-maintained LC40 for sale. The machine is powered and available for inspection. 12-position turret. Includes: 2 pcs. 3-jaw chucks, 240/330mm, various tools and accessories (see pictures), measuring probe, Mayfran chip conveyor. Nsdpfx Asyvulgoh Nsla

Condition: used, Year of construction: 2008, operating hours: 18,349 h, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, Produced in 2008, cutting time 18,349 h, OSP P200L, 4-axis double turret VDI40, A-turret VDI40 V12 with live tools, B-turret VDI40 V8, turning diameter 340 mm, turning length 1000 mm, standard spindle bore, main spindle 4800 rpm, tailstock, manual, touchsetter, chip conveyor, coolant station, in good working and geometric condition, optional tools available. Njdpfsyu N Uxsx Ah Nela

Condition: good (used), Year of construction: 2012, Max cutting diameter 584mm, 845mm swing, Njdpfx Ahjyu N Tzo Njla 165mm bar capacity, 2,000rpm spindle 24 station turret, 30kW motor power, 3 jaw chuck, Mazatrol Matrix Nexus control, tool setter, tailstock, swarf conveyor, fixed steady

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, spindle speed (max.): 3,000 rpm, quill stroke: 150 mm, controller model: Siemens 802 C, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 500 mm Turning diameter over cross slide: 280 mm Turning length: 1,500 mm X-axis travel: 295 mm Z-axis travel: 1,435 mm Spindle bore: 82 mm Spindle speed: 20 – 3,000 rpm Nljdpfx Asyuymfoh Nja Longitudinal feed: 5,000 mm/min Cross feed: 5,000 mm/min Rapid traverse longitudinal: 5 m/min Rapid traverse cross: 5 m/min Quill stroke: 150 mm Bed width: 350 mm MACHINE DETAILS Control: Siemens 802 C Main motor: 7.5 kW Dimensions & Weight Footprint: approx. 3.23 x 1.47 x 1.73 m Machine weight: approx. 3 t

Condition: used, Year of construction: 2008, DMG - CTX 510 ECO - 2008 DMG ECOLINE - system FANUC - with driven tools - X axis 300 mm - Z axis 1050 mm - max machining diameter 465 mm - max turning diameter 680 mm - spindle diameter 140 mm - max spindle RPM 3250 - 12 position turret head - with appr. tool holders 17+ - chip conveyor - 15500+ working hours Nledoyuldcopfx Ah Noa - weight 7800 kg