Barntools vof

Condition: used, Used machine Year of manufacture: 2004 Operating hours: 5000 Equipment and technical data: Planing width: 230 mm Planing height: 120 mm Number of spindles: 6 Bottom spindles: 2 Right spindle: 1 Left spindle: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom (u-r-l-o-o-u) Motor power (kW): 11-7.5-7.5-11-11-11 Maximum spindle speed: 6800 rpm Spindle diameter: 40 mm Feed speed, max.: 30 m/min Stepless feed adjustment Feed motor: 4 kW Main motor: 11 kW Pre-planing cutter Machine table surface chromed Infeed table length: 2000 mm Powered table rollers Manual lubricant pump Pgodpfxeyxyauo Af Toi Pneumatic pressure on top Cardan drive for feed rollers Total connected load: 80 kW Dimensions: 4100 x 2050 x 1900 mm Availability: approx. mid/end of April Location: Netherlands

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical specifications: Blockhouse milling machine BL100A – Four-spindle unit Designed for the production of chalet corner joints by milling all four sides of the log beam in a single clamping operation using 2x vertical and 2x horizontal milling spindles. Processing dimensions: 140 x 200 mm Milling spindle diameter: 30 mm Milling cutter diameter x width max.: 4 x 220 x 100 mm Motor power: 4 x 3.0 kW Speed: 4,200 rpm Feed: Hydropneumatic, infinitely adjustable with rapid traverse function Operation: Triggered by two-hand control / via control unit Milling depth adjustment via spindle, digital counter Workpiece clamping device: 2x vertical pneumatic clamps Extraction: Underfloor extraction funnel, diameter 160 mm Psdpfx Aeyxyanof Tegi Complete with electrical equipment, PLC control, and pneumatics. Machine base prepared for integration of an end groove and drilling unit as well as the cross-cut saw. Enclosed machine housing with hinged safety hood (supported by gas strut) and viewing window. Electric control cabinet mounted on base with 3.0 m cable duct. Ready for operation, but without tools! 2 horizontal clamps on the BL100 machine table Operation: Pneumatic, accessible from the front Automatic clamping cycle via PLC control. End groove unit Milling spindle diameter: 30 mm Milling cutter diameter x width max.: 180 x 40 mm Motor power: 3.0 kW Speed: 4,200 rpm Feed: Hydropneumatic, infinitely adjustable with rapid traverse function Height adjustment via spindle, digital counter Workpiece clamping device: Additional 1x vertical pneumatic clamp Integrated in the BL100, complete with electrical equipment and pneumatics. Ready for operation, without cutter! Horizontal drilling unit with drill guide and chip guard Drill diameter max.: 30 mm Motor power: 1.1 kW Speed: 1,500 rpm Feed: Pneumatic, infinitely adjustable with rapid traverse for idle stroke Height adjustment via spindle, digital counter Workpiece clamping device: Additional 1x vertical pneumatic clamp Integrated in the BL100, complete with electrical equipment and pneumatics. Ready for operation, with drill bit D=20mm! Under-table crosscut circular saw in BL100A – For automatic operation only! Max. cutting size (WxH): 200 x 140 mm Saw blade diameter: 500 mm Motor power: 4.0 kW Cutting speed: 86 m/s Feed: Pneumatic Operation: Only via automated program (not included in delivery) Workpiece clamping device: Pneumatic Extraction funnel: diameter 120 mm Integrated in the BL100A, complete with electrical equipment and pneumatics – Ready for operation, including saw blade! Prepared for automatic operation Includes sliding table (mechanics, pneumatics, and electrics) for the end groove milling unit and the electrical interface for controlling the functions of the BL100A using an external Tigerstop control system. Infeed table length: 9 m Outfeed table length: 4 m Further technical description to follow Availability: End of March / Beginning of April 2026 Location: Netherlands

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: Minimum workpiece length (mm): 160 Workpiece thickness (mm): 6-60 Pgjdpfx Afsyxyahs Toi Edge thickness (mm): 0.4-6 Feed speed (m/min): 10 Overall length (mm): 4930 Weight (kg): 1420 Equipment: 15" touchscreen control Jointing milling unit with 2 milling heads Edge feed GluJet glue application system 2.3 kW, automatic glue height adjustment, sensor nozzle Pneumatic pressure unit Pneumatic end trimming unit Diamond cutters left and right with CM technology Corner copying unit with diamond cutters Surface scraper blade Buffing unit Special equipment: Extendable workpiece support Motorized pressure bridge adjustment with NC axis via program control Diamond jointing cutters left and right Extraction hoods for end trimming unit MOT 4 multifunction milling unit Vertical pneumatic tracing rollers Pneumatic swiveling device for milling unit MOT 4 MOT 2 scraper unit with chip collection box Spraying device for infeed and outfeed areas Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical data: Cutting length: 3600 mm Cutting height: 1644 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Motor: 3 kW Incl. intermediate workpiece support on all sections Psdpfx Afsyxyabe Tegi Incl. narrow part device Incl. manual length stop Dimensions approx.: 4620 x 1500 x 2460 mm Location: Röllbach Availability: short notice

Condition: used, Year of construction: 1981, used machine Pjdpfx Aeyxx U Rjf Tegi year of manufacture 1981

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: Cutting range: Cutting length: 4,300 mm Cutting height: 2,100 mm Cutting depth: max. 60 mm Extraction: Saw unit: 120 mm Frame end: 100 mm Workpiece support: Stable plastic support for optimal stability, even for narrow workpieces Chips are removed through slanted grooves Roller transport system: Manual for easy and material-friendly transport Indexing: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: TCT, 250 mm, hollow flat tooth, Z48 Saw motor: 4 kW at 5,450 rpm, 400 V, 50 Hz Crosscut rail: Including workpiece stop for narrow parts (4 sections) Extraction system according to BG guidelines TRK (below 2 mg fine dust / m³ air) Dimensions: approx. 5,100 x 1,100 x 2,600 mm Weight: approx. 1,100 kg Availability: short-term Pgsdeyxx U Dopfx Af Toi Location: 63934 Röllbach

Condition: good (used), Year of construction: 2021, pivoting range: 60 °, Equipment: CE marking, – Year of manufacture: 2021 – 2 speeds: 36/72 m/min – Mitre cuts up to 60° – Saw pressure hydraulically adjustable with CCS system Pgodpfx Afsyxx Uwe Tsi – Quick-release vice – Cooling – Automatic shut-off – Saw blade: 2950 x 27 x 0.9 mm – Emergency stop – 400V

Condition: good (used), functionality: fully functional, – Length 420 cm – Emergency stop Psdpfx Afsyxx H Te Tegi – Documentation – 230V

Condition: used, mileage: 525,184 km, power: 375 kW (509.86 HP), first registration: 12/2021, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 6,100 mm, total width: 2,550 mm, total height: 3,750 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, onboard computer, power assisted steering, retarder, second fuel tank, spoiler, traction control, trailer coupling, = Additional options and accessories = - Adaptive cruise control - Alarm system - Aluminium fuel tank - Android Auto - Apple CarPlay - Roof spoiler - Intarder - Air conditioning Pgsdpsyxx H Hsfx Af Tei - Air-suspended seats - Radio/CD player - Reversing camera - Sleeper cab - Side skirts - Sun visor - Lane departure warning system = Further information = Front axle: Tyre size: 385/65 R22.5; Steered; Suspension: parabolic spring Rear axle: Tyre size: 315/80 R22.5; Twin tyres; Suspension: air suspension Unladen weight: 8,289 kg APK (Technical Inspection): valid until 10.2026 Warranty: TRANSPORT TO ANTWERP 450 EURO Reference number: 28

Condition: good (used), For sale: Robopac Robot S6 PDS – self-propelled wrapping robot (2017) Well-functioning Robopac Robot S6 PDS from 2017. This self-driving pallet wrapper is ideal for efficient and professional pallet wrapping without a fixed installation. Features: - Year of manufacture: 2017 - Fully self-propelled (flexible use) Pedpfx Ajyxx Hysf Tsgi - Equipped with powered film pre-stretch system, ensuring economical film consumption - Includes film piercer (no more manual cutting required after wrapping) - Built-in battery charger (230 volts) - Wraps up to 230 cm in height - Machine is in good condition and operates properly Batteries: - Current batteries are used - Delivery with new batteries possible (at an additional cost) Extras: - Supplied with invoice - We can also supply stretch film For more information or a video of the wrapper, please feel free to contact us. Trade-in possible: Trade-in of (defective) pallet wrappers is negotiable. Please also see my other listings. Keywords: pallet wrapper, film wrapper, wrapping machine, pallet wrapping machine, wrapping robot, robot wrapper, wrapper, film wrapper

Condition: excellent (used), Year of construction: 2016, operating hours: 350 h, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, total height: 1,870 mm, color: other, GVW: 2.060 kg Lifting capacity: 1.200 kg Psdoyxx Htjpfx Af Tsgi ONLY 350 HOURS! NEW 24V 5PzB 430Ah battery cells with central water filling system, 220V high-frequency charger, telescopic forks 1200-2000 mm, reach mast, sideshift fork positioner, power steering, folding platform,

Condition: excellent (used), Year of construction: 2019, operating hours: 7,490 h, lifting height: 8,300 mm, free lift: 2,150 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, total height: 3,300 mm, color: other, GVW: 3.820 kg Lifting capacity: 1.400 kg Pedjyxx Hmspfx Af Tegi FUNCTIONS LIKE NEW! NEW BATTERY CELLS 48V 4PzS 620Ah with central water filling system, 380V high frequency charger, Sideshift, Free lift! NEW forks, NEW wheels,

Condition: excellent (used), Year of construction: 2018, operating hours: 2,347 h, lifting height: 2,930 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, total height: 1,920 mm, color: other, GVW: 940 kg Lifting capacity: 1.400 kg Psdoyxx Hgjpfx Af Togi FUNCTIONS LIKE NEW! NEW BATTERY CELLS 24V 3PzS 315Ah with filling system, 220V high frequency charger, Fork size 1150 x 570 mm, Single fork wheels,

Condition: excellent (used), Year of construction: 2017, operating hours: 408 h, lifting height: 2,650 mm, free lift: 1,230 mm, fuel type: electric, mast type: free lift with telescopic boom, fork length: 900 mm, total height: 1,840 mm, color: other, GVW: 910 kg Mast: telescopic (2 parts) Lifting capacity: 1.400 kg ONLY 408 HOURS! SPECIAL FORK SIZE length 900 mm x width 450 mm: spacing 90 mm, Bluespot, Free lift! Battery 24V 3PzB 225Ah 01-2023 with central filling system, 220V high-frequency charger, Pgedpfx Asyxx Hajf Tji

Condition: excellent (used), Year of construction: 2017, operating hours: 3,962 h, lifting height: 210 mm, fuel type: electric, fork length: 1,150 mm, total height: 1,400 mm, color: other, GVW: 970 kg Pjdpfx Afeyxx E Ne Tjgi Lifting capacity: 2.000 kg FUNCTIONS LIKE NEW! 2021 battery 24V 3PzS 465 Ah with central water filling system, 220V high frequency charger, Good tires, Powersteering, Well maintained!

Condition: excellent (used), Year of construction: 2011, operating hours: 14,749 h, lifting height: 4,920 mm, free lift: 1,660 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, total height: 2,320 mm, color: other, GVW: 4.910 kg Lifting capacity: 2.500 kg Pjdpfx Afoyxx E Aj Tjgi Cabin, Heating, New SE tires, Joysticks, Battery 80V 5PzS 775Ah 2022 with central water-filling system, 380V high-frequency charger, Sideshift-Forkpositioner,

Condition: excellent (used), Fezer Crosscut and Mitre Saw The powerful solution for workshop and construction site for cutting wood, aluminium, and plastics Type: KG 25 AC motor 220 Volt, 0.85 kW 2800 rpm Pgjdeyxx Evopfx Af Tei Indexing for mitre cuts Any intermediate position can be locked by clamping screw. For 250 mm saw blade Weight: approx. 24 kg Cutting capacity at 90 degrees: H = 50 mm / W = 120 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1979, Ulmia 1725 Precision Sliding Table Saw Precision miter cuts and fine joinery work. Saw blade adjustable in height and tilt. Saw blade swivels from 0-45 degrees according to scale and can be set precisely to the desired cutting height in any position. Tabletop with removable table insert and one guide groove each to the left and right of the saw blade. Slides longitudinally on ball-bearing segments in hardened and ground guide tracks, with return spring. Table size: 1100 x 700 mm Minimum distance from saw spindle to top of table: 60 mm Saw blade height adjustment: 60 mm Max. saw blade diameter: 350 mm Max. cutting height: 115 mm Pjdpfx Afoyxx D Ss Tsgi Cutting width to the side of the blade (normal): 360 mm Saw blade bore: 30 mm Table travel (normal): 430 mm Saw spindle speed: 4,500 rpm Motor power: 2.2 kW Height to top edge of table: 880 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Haffner Chain Mortiser KKF 15 Chain Guide bar Handwheel adjustment Door support Pedpfxeyxx A Uj Af Togi Location: From stock 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 1994, Manufacturer FRAMAR – Italy Vertical machining: 0 - 180 mm Cross travel: 0 - 150 mm Longitudinal stroke: 0 - 270 mm Table size: 540 / 110 mm Vertical table travel: 0 - 90 mm Work table tilt: 0 – 45 degrees Milling unit angle adjustment: 0 – 45 degrees Maximum door width: 950 mm Motor power: 1.5 kW Operating speed: 2800 rpm Location: in stock at 54634 Bitburg - immediately available - Psdpoyxx A Isfx Af Togi

Condition: excellent (used), CNC Machining Center Ganner m GANNOmat PRO TEC 571; SN: 491.150, with Clamex Year: 2021 Milling unit, power 5.5 kW, Workpiece dimensions: approx. 1,000 x 5,600 x 60 mm, Double laser measurement and workpiece straightening, Gentle workpiece handling with air nozzles (air cushion table) Roller table for machine front side, L 765 mm, W 500 mm, foldable, roller table 765 mm (Y-axis), Auxiliary stop 600 mm, with built-in rollers for roller tables, Additional safety system with lamella curtain, Additional package Lamello P-System, upper counterpressure device HSK holder with 3-position changer Psdpfxjyxxz Ro Af Tsgi Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2019, functionality: fully functional, 1,0 St. gebr. Temperiergerät mit 48 Regelstellen Pgjdpfx Aoyxxz Dsf Tji Hersteller: GAMMAFLUX Typ: GS1G030F024S4EJ Baujahr: 2019

Condition: good (used), Year of construction: 1993, 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 Podpfx Aeyxxzwof Tjgi Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg Location: ex-stock 54634 Bitburg - immediately available -

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 11889, Year of construction: 2017, operating hours: 12,000 h, load capacity: 1,500 kg, lifting height: 6,500 mm, fuel type: electric, mast type: triplex, gearing type: automatic, battery voltage: 48 V, battery weight: 750 kg, tire condition: 80 %, rear tire type: cushion tires (non-marking), Equipment: CE marking, full service history, head guard, lighting, pallet forks, sideshift, For sale: Toyota BFBET15 electric forklift truck in good working condition. The machine is fully operational and regularly used. Specifications: Type: Electric counterbalance forklift, Capacity: 1500 kg, Brand: Toyota, Model: BFBET15. Condition: Technically fully functional, Valid inspection (UDT), Well maintained and in daily use. 🔋 Battery condition: battery is at the end of its life – requires regeneration or replacement. The forklift is ideal for warehouse, production, or logistics operations. Pgjdpfxsyxxzqj Af Tsi

Condition: used, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2012, suspension: air, tire size: 445/45R19,5, maximum speed: 150 km/h, GERMAN DEALER offers: BDF swap body trailer GALVANIZED Wide tyres 445/45R19.5 Long air bellows Longitudinally adjustable drawbar Spare wheel Pgedpjyxxzkjfx Af Tsi Toolbox Price does not include the swap body! Many chassis and swap bodies in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO-NUTZFAHRZEUGE HAS BEEN DELIVERING SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####