CTB Machine LTD.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,012 h, functionality: fully functional, machine/vehicle number: 31-46644, The HELLER MCi 16.2 is a high-precision, CNC-controlled horizontal machining center (HMC) from the German manufacturer HELLER. The machine is designed for productive and flexible series production (e.g., in mechanical engineering or the automotive sector). Equipment: -Horizontal spindle, pallet changer with rotary table, additional 4-position pallet changer (manufacturer: RILE RSP-MC+16.2, year of manufacture: 2004, serial number: 0421635093) -2nd operator terminal, chain-type tool changer with approximately 80 positions, chip conveyor (manufacturer: Knoll 600K, coolant/lubricant processing with band filter, switch cabinet, separate cooling unit (manufacturer: BKW) Control: Fpjdpoz N Ewijfx Ahdjn -Siemens 840D Accessories: -Telescopic drawer cabinet (8 drawers) with attached work surface, workbench (1 door) with partition, lighting fixture Contents: various machine accessories

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 680 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 60,000 m/min, feed rate Z-axis: 60,000 m/min, workpiece weight (max.): 500 kg, total height: 2,850 mm, total length: 4,855 mm, total width: 3,100 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,100 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 22,000 W, number of slots in tool magazine: 166, Equipment: chip conveyor, Horizontal machining center (HMC) MORI SEIKI - NHX 5000 MACH-ID 9834 Make: MORI SEIKI Type: NHX 5000 Control: MSX-711 MAPPS III YOP: 2011 X - Travel: 730mm Y - Travel: 730mm Z - Travel: 680mm B-Axis indexing: 360000° Table Length: 500mm Table Width: 500mm Table load: 500 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: Bt40ISO/Bt/Mk Power on spindle: 22kW Fsdpfx Aez Nw Ershdjpn Speeds / ranges: 12000Rpm ATC / revolver: 166 Coolant through spindle / Bar:20 Number of controlled axis: 3+1 Chip conveyor: yes Coolantsystem: yes Length: 4855mm Width: 3100mm Height: 2850mm Weight: 11100kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 19172, Equipment: chip conveyor, CNC machining center Heckert HEC400F, Serial No. 19172, Year of Manufacture 2016 including: - Chip conveyor Starrag KF86, Serial No. 21600130-3 - Emulsion filter system Lehmann KSS162, ID No. 210600284-3, Year of Manufacture 2016 - Industrial cooling system Hyfra 27 Alpha 13-E-S, Serial No. 2003206, Year of Manufacture 2016 - Siemens Sinumerik control system - Oil mist separator LTA The machine can be purchased via online auction on our website (HPC). You can access the website by clicking on the link in the advertisement. Auction end dates: October 19, 2026 to October 22, 2026 Fpedpfx Aez Nifkehdjn

Condition: used, Year of construction: 2013, x-travel 700 mm y-travel 700 mm z-travel 700 mm control 840 D sl Siemens Max. Speed Subspindle 10.000 min/-1 power capacity - main spindel 42 kW Fpedjz I Dy Sjpfx Ahdjn max. Torque 236 Nm tool taper HSK-A 63 DIN 69893 Number of pallet-stations 10 pos. size of pallet 500 x 500 mm max. workpiece weight 600 kg max. workpiecediameter 800 mm max. workpiece height 1.000 mm number of toolpositions 180 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 550 mm max. tool weight 12,0 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 sec rapid traverse ( X / Y / Z ) 60 m/min feed speeds max. 60.000 mm/min Accelaration x/y/z: 6 / 6 / 5 m/s² feed power 10 kN total power requirement 67 kW weight of the machine ca. 9,7 t dimensions of the machine ca. 7,5 x 5,0 x 2,8 m CNC - Machiningcenter Horizontal DECKEL MAHO - DMC 65 H duoBLOCK

Condition: ready for operation (used), Year of construction: 2005, operating hours: 3,648 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 625 mm Travel range Y-axis: 650 mm Travel range Z-axis: 650 mm B-axis swivel range: 360° B-axis resolution: 0.001° B-axis speed: 100 rpm Spindle speed: 50–10,000 rpm Spindle power: 24 / 37 kW Spindle torque: 250 / 350 Nm Spindle operating hours: 3,648 h Tool interface: HSK-A63 according to DIN 69893 Number of pallets: 2 Pallet size: 500 × 400 mm Pallet load capacity: 400 kg Pallet change time: 8 / 5 s T-slots: according to DIN 55201 Magazine capacity: 60 Max. tool diameter: 80 mm Max. tool diameter with free adjacent slots: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Max. total weight of tools: 200 kg Fpodpfxez Izc Re Ahdjn MACHINE DETAILS Control system: Siemens Sinumerik 840D Coolant tank volume: approx. 1,100 l Coolant pressure: 50 bar Dimensions & Weight Dimensions (L x W): 5,800 x 4,800 mm Machine weight: 12,800 kg Total automatic operation: 32,099 h Total operating hours: 20,326 h Spindle hours: 3,648 h EQUIPMENT Pallet changer Chain magazine with 60 tool positions Knoll coolant unit with filter fleece Emulsion cooling inside and outside Renishaw measuring probe Tool breakage monitoring in the magazine Chip conveyor Sound enclosure Paper band filter Rinsing gun at the setup station Closed work area enclosure according to UVV Pallet sequence operation Network connection Ethernet interface Technical documentation Layout plan

Condition: like new (used), Year of construction: 2019, functionality: fully functional, HORIZONTAL MACHINING CENTER MAZAK HCN 5000 cnc Smooth G MACHINE COMPLETE WITH A 6-STATION PALLETECH SYSTEM AND A LOADING/UNLOADING UNIT RENISHAW OMP60 Control unit: SMOOTH G Fedez Iw Ezepfx Ahdopn X-axis: 730 mm Y-axis: 730 mm Z-axis: 800 mm Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface with threaded holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm Spindle connection: ISO 40 Torque (continuous / 10 min): 168 NM Number of tools: 120 Pressure: 15 bar, preparation: 70 bar PALLET size: 500x500

Condition: as good as new (ex-display), functionality: fully functional, 1. Machine Specifications * 2 work tables with pallet changing system - Clamping area: 630 x 630 mm - Threaded holes: 23 x M16x30 - Max. clamping weight: 1000 kg * Travel ranges - Table longitudinal adjustment (x): 850 mm - Support vertical adjustment (y): 710 mm - Column transverse adjustment (z): 710 mm * Max. feed rate: 10 m/min * Rapid traverse: 15 m/min * Working spindle - Tool interface: SK 50 DIN - Drive power: 22 kW AC - Torque: 660 Nm - Speed range, stepless: 20 ... 6000 rpm * Coolant supply through the spindle center: 10 bar * Tool magazine: 60 positions * Control system: Sinumerik 850M, software version 4.5 * Feed and main drive: AC Indramat * Footprint (L x W x H): 4100 x 6000 x 3500 mm * Work area protection 2. Technical Condition The machine has never been used in production!!! It is an unused machine – no production hours. Therefore, the machine meets all technical parameters within the acceptance conditions for new machines. 3. Warranty: Last inspection 04/2026, 6 months 4. Prices: * Machine: €120,000.00 * Spare parts package: included * Assembly/Commissioning: €7,500.00 (for assembly/commissioning abroad, travel expenses will be added) 5. Delivery Conditions: * Pricing: Prices are quoted net for delivery or service ex works, excluding VAT. We reserve the right to sell the machine in the meantime. Our delivery and service terms and conditions apply. * Payment terms: 30% down payment upon order 60% upon delivery 10% upon handover * Delivery time: 4 weeks Manfred Friedrich Export / Import Clemens-Winkler-Str. 6, 09116 Chemnitz The following spare parts can be supplied: Indramat motor - 2 AD 132D-BO50 R2-AS 03 - MAC 093 A-0-LS-2-C/130-A1 - MAC 112D-0-HD-4-C/180-BO - MAC 112C-0-KD-2-C/180-A-2 Indramat controller - TBM 1.2-40-W 1/220 V - TDM 1.2-100-300-W1 - TVM 2.2-050-220/300-W1 Heidenheim length measuring system LS403-820 2x - LS403-1020 Tool holders DIN SK 50 - 60 pieces Roller guide element 26 110 Fpedpfxjz H Tqwj Ahdon - 25 pieces

Condition: used, functionality: fully functional, 1. Machine specifications * Pallet changer with 6 pallets - Clamping area: 4 x 800 x 800 mm 2 x 800 x 1000 mm - Max. clamping weight: 2000 kg - Interference circle: D = 1200 mm - Changeover time: 35 sec. * Travel ranges - Workpiece (x): 1140 mm - Support vertical adjustment (y): 910 mm - Column transverse adjustment (z): 875 mm * Max. feed force: 20,000 N * Rapid traverse: 24 m/min * Working spindle - tool holder - SK 50 DIN - Drive power 100/40 % duty cycle: 22/32 kW - Torque 100/40 % duty cycle: 720/1040 Nm - Speed range, stepless: 20 ... 6000 rpm Fsdpfx Aoz H Tqdehdopn * Coolant supply through the spindle center: 10 bar * Tool magazine (cassette): 186 positions - Average chip-to-chip time: 11 sec. * Control system: Siemens 840C * Work area protection 2. Year of manufacture: 1995 The machine was only used in production until February 2011!!! 3. Warranty: none 4. Prices: * Machine: €30,000.00 5. Delivery conditions: * Payment terms: 100% before collection * Delivery date: ex-stock

Condition: refurbished (used), 1. Machine Specifications * 2 work tables with automatic pallet changer - Clamping area 400 x 400 mm - Perforated pallets - Max. clamping weight 400 kg - NC rotary table - Rotatable clamping position * Travel ranges - Column longitudinal travel (x) 650 mm - Support vertical travel (y) 500 mm - Table transverse travel (z) 650 mm * Max. feed rate 36 m/min * Rapid traverse 40 m/min * Working spindle - Tool interface - SK 40 DIN 69871 - Drive power 24 kW AC - Torque 230 Nm - Speed range, stepless 0 ... 10000 rpm * Coolant supply through the spindle center 50 bar * Tool magazine 60 positions * Control system Sinumerik 840 D * Machine bed made of mineral cast * Enclosed work area protection * Chip conveyor * Paper band filter system 2. Technical Condition The machine was only used in production until February 2013! Due to the overhaul, the machine meets the acceptance conditions for new machines. - The machine was completely disassembled and cleaned. - All compact guides and ball screw drives were replaced. - The main drive motor and feed motors were inspected in authorized workshops and, if necessary, refurbished. - The main spindle body was replaced with a new one, the spindle was re-bearinged, and run-in on the test stand. - All cables, air lines, and defective sensors were replaced. - Table assembly, magazine, tool changer, and coolant system were overhauled. - The panes of the work area protection were renewed, and a new paint job was applied. In addition, a new main spindle and a new Kessler motor can be supplied as spare parts. Fpedpfxsz H Tn Ae Ahden 3. Warranty: last inspection 03/2013; 3 months 4. Prices: * Machine €110,000.00 * Installation/Commissioning €6,000.00 (for installation/commissioning abroad, travel costs will be added) 5. Delivery Conditions: * Pricing: Prices are quoted net for delivery or service ex works. We reserve the right to sell the machine in the interim. Our delivery and service terms and conditions apply. * Payment terms: 30% down payment upon order against invoice 60% upon delivery 10% upon handover * Delivery time: 4 weeks

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, table width: 500 mm, table length: 500 mm, table load: 500 kg, spindle speed (min.): 8,000 rpm, coolant supply: 70 bar, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC MSX 501 WORKING CAPABILITIES: X-axis travel: 630 mm Y-axis travel: 600 mm Z-axis travel: 670 mm B-axis rotation: 360° Rapid traverse speed X, Y, Z: 50 m/min TABLE: Number of pallets: 2 Table dimensions: 500 x 500 mm Maximum workpiece dimensions: Ø 800 x 1,000 mm Table load capacity: 500 kg Fsdsz H I A Uspfx Ahdepn SPINDLE: Tool holder taper: ISO 50 Maximum spindle speed: 8,000 rpm Machine configuration: •120-tool magazine •Spindle connection DIN 69871 ISO 50 •High-pressure system through the spindle, 70 bar, complete with tank and paper filter •Chip evacuator •Operating manuals and CE declaration Year of manufacture: 2004

Condition: excellent (used), Year of construction: 2004, operating hours: 19,000 h, functionality: fully functional, coolant supply: 40 bar, number of slots in tool magazine: 300, Equipment: documentation/manual, This machine was used solely for precision finishing and is in very good condition. Fpjdjz Hzymepfx Ahdsn

Condition: ready for operation (used), Year of construction: 2014, operating hours: 15,894 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: SIEMENS, controller model: 840D sl, total height: 2,800 mm, total width: 3,000 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, product length (max.): 5,500 mm, number of axes: 4, This 4-axis DMG MORI NHX5000 horizontal machining centre was manufactured in 2014. It features a travel of 730 mm in both the X and Y axes, and 880 mm in the Z axis. The machine has a maximum spindle speed of 12,000 rpm and can handle workpieces weighing up to 500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX5000 machine we have for sale. Contact us for further details. - Max. Torque: 102 Nm- Max. Workpiece Weight per Pallet: 500 kg- Max. Workpiece Diameter: 630 mm- Max. Workpiece Height: 900 mm- B-axis Indexing (Table): 360 x 1 degree- Max. Feed Rate: 60,000 mm/min- Rapid Traverse: 60 m/min- Jog Feed Rate: 0 – 5,000 mm/min- Total Power Requirement: 57 kVA- Space Requirement (LxWxH): 5.5 x 3.0 x 2.8 m- Pallet Changer: 2-fold, pallet size 500 x 500 mm- Equipment & Accessories: Chip conveyor, high-pressure coolant unit (40 bar), internal coolant supply (IKZ), tool changer, documentation, Renishaw PP60op measuring probe Fpsdjz E I R Nspfx Ahdsn Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, CNC Machining Centre – Horizontal | Brand: HÜLLER HILLE | Type: NBH 95 Year of manufacture: 2001 Fpjdpfx Ahez Emp Rodjn The machine can be inspected under power by prior appointment. Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS: Working area - X/Y/Z axes: 630/630/630 mm - Workpiece swivel range within the working area: Ø 750 mm - Spindle clearance above top edge of pallet: min./max. 150/780 mm Pallet - Pallet clamping area: 400 x 500 mm - Transport load per pallet: approx. 0,6 tons - Fixture height: 880 mm - Pallet changeover time: approx. 7 sec. NC rotary table (B-axis) - Smallest incremental step: 0,001 degrees - Positioning uncertainty A according to ISO 230-2: 0,003 degrees - Permissible torques on the clamped table: * Tangential torque: max. 3.200 Nm * Tilting torque: max. 4.500 Nm Working spindle / Gearbox headstock - Tool holder: HSK-A 63 - Diameter at front bearing: 80 mm - Drive power 100% duty cycle/40% duty cycle: 21/30 kW - Speed range: max. 16.000 rpm - Torque at 100% duty cycle / 40% duty cycle: max. 100/143 Nm Feed / Feed force / Rapid traverse - Feed range, X, Y and Z axes: 1 – 50,000 mm/min - Feed force, X, Y and Z axes, 40% duty cycle: approx. 10.000 N - Rapid traverse speed, X, Y and Z axes: 50 m/min - Rapid traverse of rotary table: 40 rpm - Acceleration: approx. 7 m/s² - Ball screw (pitch): Ø 40 (20) mm Tool magazine: - Tool positions: 144 - 2 additional tool cassettes, each with 47 positions - Number of tool loading and unloading stations: 1 - Tool diameter / max. tool diameter: 75 / 175 (200) mm - Tool length: max. 400 (450) mm - Tool weight: max. 12 kg - Magazine cassette load capacity (including cassette): max. 600 kg Electrical system - Total power requirement: 80 kW Machine installation - Space requirements, area: approx. 16,75 m², height: 3,2 m - Ready-to-use machine weight: approx. 13,5 tons ACCESSORIES / EQUIPMENT: - Control: Siemens SINUMERIK 840D - Chip conveyor - Additional equipment for automated production: MPS pallet storage system - Documentation - CE marking - ... Technical data sheet with full details, including information on the further features, available on request. No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: excellent (used), Year of construction: 2007, Mori Seiki NH6300 DCG Horizontal Machining Center Installation year: 2007 BT 50 spindle, 10,000 rpm High-pressure coolant through the spindle, 50 bar, with a dedicated paper filter tank 10 pallets, 630 x 630 Continuous B-axis Axis travels: X900, Y800, Z980 180-position tool magazine Tool breakage detection in the magazine Dust extraction system FMS Fastems linear 10-pallet system (5+5) Fpjdsz Ea Dhspfx Ahdsn 2 loading stations

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis MORI SEIKI NHX 5000 was manufactured in 2011. It features a generous X-axis travel of 730 mm, Y-axis travel of 730 mm, and Z-axis travel of 880 mm. The machine is equipped with a continuous 4th axis (B-axis) and a tool changer capacity of 60 positions. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Control unit: MAPPS IV CNC • Pallet dimensions: 500 x 500 mm • Table rotation: Continuous 4th axis (B-axis) Additional equipment • Chip conveyor • Coolant system with filtration unit and paper filter • High-pressure coolant, 90 bar Fedpfx Ajz Earfshdjpn • Tool presetting (tool measurement) Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2006, MORI SEIKI NV-5000 α 1A/40 4-AXIS MACHINING CENTER YEAR 2006 MODEL NV-5000α1A/40 CNC MSX-501 (MAPPS-M conversational) FEATURES 1. WORK AREA AND TRAVEL • X-axis travel: 800 mm • Y-axis travel: 510 mm • Z-axis travel: 510 mm • Distance between table surface and spindle nose: 150 - 660 mm 2. TABLE • Table size: 1,100 x 600 mm • Maximum load capacity: 1,000 kg • Configuration: 6 x 18 mm T-slots 3. SPINDLE • Spindle speed: 14,000 rpm • Spindle mount: MAS BT-40 (7/24 Taper No. 40) • Bearing inner diameter: 65 mm • Motor power (30 min/duty): 22 / 18.5 kW • Cooling: Chiller for spindle cooling included 4. FEED RATES AND ACCURACY • Rapid traverse rates: 42,000 mm/min • Jog feed rate: 0 - 1,260 mm/min • Positioning accuracy: 0.005 mm (over the entire travel) • Positioning repeatability: ± 0.001 mm 5. AUTOMATIC TOOL CHANGER (ATC) • Tool magazine capacity: 30 positions • Tool holder type: MAS BT-40 (90° pull stud) • Maximum tool diameter: 80 mm (125 mm with adjacent positions empty) • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Tool change time (chip-to-chip): 2.6 seconds (1.0 s from tool to tool) 6. CNC FEATURES (Mori Seiki MSX-501) • Monitor: 10.4" TFT color active matrix • Program memory: 320 m (63 programs can be stored) • Main functions: o LOOK-AHEAD (G08) for high-speed 2D profile control o Synchronous tapping (Rigid Tapping) o Helical interpolation o Load Monitor (cutting force management) o RS-232-C and PCMCIA interface standard 7. DIMENSIONS, WEIGHTS AND CONSUMPTIONS • Machine height: 2,603 mm • Installation area: 2,788 x 2,710 mm • Machine weight: 6,960 kg • Installed electrical power: 50.5 kVA • Coolant tank capacity: 275 liters 8. EQUIPMENT AND INCLUDED ACCESSORIES • Chip conveyor: Left-side conveyor Fpedpfx Ahjz Dv T Njdsn • Coolant system: Coolant interface through the spindle (Type-B) with additional high-pressure pump (50 Atm) and dual filter • Cleaning system: Pneumatic • Signaling: Light and sound indicator for cycle end • Transformer: Included (380V/50Hz > 200V/60Hz) Machine complete with manuals, test certificates and CE declaration All technical data provided is indicative and may be subject to change without prior notice and therefore should not be considered binding.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, table load: 400 kg, spindle speed (max.): 12,000 rpm, tool weight: 10,000 g, number of axes: 3, This 3-axis Matsuura H.Plus 405 was manufactured in 2005. It features a pallet working surface of 500 x 500 mm and a maximum load capacity of 400 kg. The machine offers an impressive X, Y, and Z-axis travel of 600 mm each, along with a spindle speed range of 40 - 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matsuura H.Plus 405 horizontal machining centre we have for sale. Contact us for further details. Fjdjz Dv Tpopfx Ahdopn • Pallet working surface: 500 x 500 mm • Max. workpiece size: Ø 650 x 750 mm • Spindle bearing inner diameter: 80 mm • Number of tool slots: 51 • Max. tool diameter: 90 mm • Max. tool length: 350 mm • Rapid traverse rate: 50 m/min

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16 was manufactured in 2001. It features a generous X, Y, and Z-axis travel of 630 mm each, along with a tool magazine capacity of 80 pockets. The machine is equipped with a rotary table capable of handling a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details. - Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN (centered)- Rotary Table Max Tangential Torque: 10,000 Nm (clamped)- Rotary Table Max Tilting Moment: 8,000 Nm (clamped)- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Magazine Capacity: 80 tool pockets, 1 insertion pocket- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Measuring System: Direct in X, Y, Z axes- Positioning Tolerance: 0.007 mm- Optional Equipment / Features: Hydraulic workpiece clamping, central cooling unit for motor spindle and cabinet, probe with IR receiver, chip conveyor, tool coding, manual workpiece setup station (rotatable 4x90°), drill breakage control, prepared for emulsion mist extraction- Included Components: Without clamping device, without machine pallet Technical Specification Fpsdoz Dh Dtopfx Ahden Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, total height: 3,200 mm, total width: 3,400 mm, overall weight: 9,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 40, product length (max.): 6,250 mm, number of axes: 4, This 4-axis HELLER MCI 16 was manufactured in 2004. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a spindle power of 38 kW. The machine includes a tool magazine capacity of 40 pockets and a rotary table with a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 horizontal machining centre we have for sale. Contact us for further details. - Voltage: 400 V- Frequency: 50 Hz- Nominal Current: 99 A- Total Connected Load: approx. 69 kVA- Feed Rates (X, Y, Z): 1 - 60,000 mm/min- Rapid Traverse (X, Y, Z): 60,000 mm/min- Acceleration (X, Y, Z): 10.0 m/s²- Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN- Rotary Table Max Tangential Torque: 10,000 Nm- Rotary Table Max Tilting Moment: 8,000 Nm- B-Axis Speed: 40 rpm- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Chain Magazine Capacity: 40 tool pockets- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Spindle Max Power (S6-40%): 38 kW (from 1500 rpm)- Spindle Max Torque (S6-40%): 240 Nm (up to 1500 rpm)- Measuring System: Direct with linear scales- Positioning Tolerance: 0.007 mm- Coolant Capacity: approx. 1,500 L- Optional Equipment / Features: Central cooling unit for spindle and cabinet, run-out inspection device RLE1, mechanical drill breakage control, coolant lubricant system with chip conveyor, Renishaw probe, manual rotatable workpiece setup station (4x90°)- Included Components: Without clamping device, including 2x machine pallets Fpedpfez Dhgbox Ahdjn Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 1999, Machine is used, in good condition. Fpsdpfxsz Arlzj Ahdjn Parts shown by hand not come.

Condition: good (used), Year of construction: 2014, functionality: fully functional, DOOSAN Horizontal Machining Center Model: NHP 5500 Fpodpfxez Apb To Ahdjn Year: 2014 Control Unit: FANUC 31I-MODEL B X-axis travel: 800 Y-axis travel: 750 Z-axis travel: 850 Table length: 500 Table width: 500 Max. workpiece size (length x width x height): D.850x1100 Table surface: Tapped holes Max. workpiece weight: 800 kg Spindle: 10000 rpm with oil-cooled, double-contact flange Spindle connection: ISO 50 Torque (cont. / 10 min): 600 NM Rapid traverse rate (xyz axes): 60,000 Number of tools: 60 Coolant pressure: 70 Bar Coolant tank capacity: 500L Height: 3495 Width: 3930 Depth: 6520 Weight: 18000 Pallet size: 500x500 Chip conveyor: Scraper type -EXTERNAL 4-WAY HYDRAULIC LOCKING SYSTEM, 70 BAR, WITH LOCK/UNLOCK SWITCH -INTERNAL/EXTERNAL AIR BLOW FUNCTION, ADJUSTABLE "M" FUNCTION -AUXILIARY PUMP FOR SHOWER WASHING, CALPEDA 15 BAR -PREPARATION FOR ROBOT ELECTRICAL CONNECTION (FANUC) -INTERNAL TOOL LENGTH AND RADIUS OFFSETTING SYSTEM, RENISHAW TS27R. A NEW, IDENTICAL UNIT IS AVAILABLE IN STOCK IN CASE OF FAILURE. -PREPARATION FOR WORKPIECE MEASUREMENT AND OFFSETTING PROBE WITH RENISHAW RMP60 CYCLES (RADIO TRANSMISSION)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Horizontal machining center MAZAK Model: HCN 6000 Year: 2011 Control unit: MAZATROL MATRIX 2 X-axis travel: 800 Y-axis travel: 800 Z-axis travel: 800 Table length: 500 Table width: 500 Fpedpfxez Apacs Ahdon Maximum workpiece size (length x width x height): D.900 x H.1000 Table surface: Tapped holes Maximum workpiece weight: 1000 Spindle speed: 7000 Spindle connection: ISO 50 Torque (continuous / 10 min): 680 Nm Rapid traverse rate X-axis: 60000 Rapid traverse rate Y-axis: 60000 Rapid traverse rate Z-axis: 60000 Number of tools: 60 Maximum tool diameter: 250 Maximum tool length (from reference line): 500 Tool selection method: Fixed Maximum tool weight: 30 Kg Tool change time: 5 sec. Pressure: 50 BAR Height: 3350 Width: 2820 Depth: 6755 Weight: 14700 Tool kit included

Condition: good (used), Year of construction: 2006, functionality: fully functional, Leadwell horizontal machining center Fpedpfx Aoz An Urjhdon Model: LCH-500 Year: 2006 Table size: 500 x 500 mm Control unit: Fanuc O-i MC X-axis travel: 700 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Maximum spindle speed: 10,000 rpm Spindle connection: ISO 40 Spindle power: 18.5 kW Chip conveyor (belt type) Pallet changer High-pressure system at 20 bar through the spindle

Condition: excellent (used), Year of construction: 2011, operating hours: 5,203 h, functionality: fully functional, MORI SEIKI NH5000 DCG MACHINE DATA Manufacturer: MORI SEIKI Model: NH5000 DCG Year of Manufacture: 2011 Control System: FANUC 31iA / MAPPS Program Runtime: Only 5,203 hours Fodpfxoz Abwte Ahdepn TECHNICAL DATA Travel in X/Y/Z: 730 × 730 × 850 mm Spindle Speed: Up to 14,000 rpm Spindle Taper: HSK-A63 Automatic Tool Changer: 60 positions Feed Rate: 50 m/min Rapid Traverse: 50 m/min B-axis Indexing: 360° Pallets: Two Pallet Size: 500 × 500 mm Max. Workpiece Dimensions: Ø800 × 1,000 mm Internal Coolant: 680 liters Chip Conveyor: Included in the scope of supply The machine is sold as a complete production unit, including tooling. Excellent, like-new condition Immediately available Inspection and test run possible

Condition: like new (used), Year of construction: 2022, operating hours: 10,000 h, functionality: fully functional, number of slots in tool magazine: 80, MAZAK HCN-5000 Horizontal Machining Center Year 2024 Control Unit: Smooth G X-axis travel: 730 Y-axis travel: 730 Z-axis travel: 800 Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface: Tapped holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm (high torque) Spindle taper: ISO 40 Rapid traverse rate (X-axis): 60,000 Rapid traverse rate (Y-axis): 60,000 Rapid traverse rate (Z-axis): 60,000 Number of tools (ATC): 40-60-80 Maximum tool diameter (ATC): D. 95 D.170 Maximum tool length (from reference line) (ATC): 170 Tool selection method (ATC): FIXED Maximum tool weight (ATC): 12 Fpedpfx Ahoz Aaukodjn Tool change time (ATC): 2.8 Coolant pressure: 15 Bar Coolant tank capacity: 500L Height (machine dimensions): 2813 Width (machine dimensions): 2623 Depth (machine dimensions): 5769 Weight (machine dimensions): 11430 Pallet size: 500x500