LMB Veldman BV

Condition: used, mileage: 1,032,206 km, power: 330 kW (448.67 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, gearing type: automatic, emission class: euro6, Year of construction: 2014, Engine capacity: 12.809 cc Empty weight: 9.295 kg Carrying capacity: 8.705 kg GVW: 18.000 kg Nwodpfx Asx N I Dpsf Sjr Auction item. The truck is sold with a trailer. Trailer: KAESSBOHRER APT 012, weight 8,500kg, total weight 17,000kg, 2007. Sold as seen in the photos and video.

Condition: refurbished (used), TECHNICAL SPECIFICATIONS Rotary table diameter: 600 mm Magnetic plate diameter: 600 mm Segment holder (or diamond grinding wheel) diameter: 430 mm Maximum grinding height: 400 mm Table rotation speed, continuously adjustable: 1-20 rpm Vertical automatic increments: 0.001 mm Spindle motor power: 37 kW Nwjdpfx Afjx N I A Se Ssr Grinding spindle speed, continuously adjustable: 500-1000 rpm Maximum load on table: 900 kg Net machine weight: approx. 7500 kg Power supply: 400 V +/- 5% 3 Phases, 50 Hz Control circuit voltage = 24 V DC TECHNICAL DESCRIPTION • Frame and uprights made of electro-welded, thermally stabilized steel, with high rigidity and reinforcing ribs. Vertical movement of the spindle head • Precision linear slides • Vertical movements of the grinding wheel head via high-precision ball screws + YASKAWA brushless shaft motor • Vertical movements of the grinding wheel head via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel head, 0.001 mm resolution Transverse movement of the rotary table • Precision linear slides • Transverse movement of the rotary table via high-precision ball screws + YASKAWA brushless shaft motor. • Transverse table movements via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel headstock, 0.001 mm resolution. Spindle Motor • Coaxial spindle with drive motor • Balanced 37 kW spindle motor, without drive belt or coupling. • Frequency converter for continuously variable spindle speed and rapid braking of the spindle motor at the end of the cycle. Rotary Table • Cast iron rotary table with hydrostatic slides. • Drive via Siemens brushless motor • Continuously adjustable table speed from 1 to 20 rpm STANDARD EQUIPMENT • Electropermanent magnetic chuck, 600 mm diameter with parallel poles, complete with electronic control and attraction force adjustment • Electronic handwheel for manual movement of the vertical and transverse axes. • LODI CNC Type T 2000 • Encoder-based measuring system for the vertical and transverse axes. Resolution = 0.001 mm • Automatic cycle with different feed rates for the various cycle phases: roughing, finishing, and sparking. • Cast iron rotary table with hydrostatic slides • Rotary table speed continuously adjustable by brushless motor • Frequency converter for continuous spindle speed adjustment and rapid spindle motor braking. • Coolant system with external collection tray. • External lubrication unit for automatic lubrication of all moving parts. • Complete segment holder (flange) with a set of segments + grinding wheel holder for diamond grinding wheel • Complete work area enclosure with sliding door • Work lights • Set of service wrenches • Documentation in French (1x printed, 1x on DVD) • CE Certificate Lubrication • External lubrication system for lubricating all moving parts. Watering System • Watering system including protective plates and hoses, including a settling tank outside the machine (without filter) Enclosure • Full enclosure with manually operated sliding door CNC Control LODI T2000 type CNC for managing and controlling the machine's axis movements. Automatic work cycle for grinding parts.

Condition: reconditioned (used), Year of construction: 2010, TECHNICAL SPECIFICATIONS, MODEL T 40.20 CN Grinding length mm: 400 Grinding width with grinding wheel width mm: 225 Grinding height with new grinding wheel (on magnetic chuck) mm: 280 Magnetic chuck surface mm: 400 x 200 Longitudinal travel mm: 500 Transverse travel of the carriage under the table mm: 220 Adjustable table speed m/min: 1-30 Nodpfx Aex N I A Ejf Sswr Grinding wheel dimensions mm: Ø225 x 25 x 51 Grinding wheel rotation speed, fixed rpm: 3,000 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power 3 HP Hydraulic pump motor power 2 HP Net machine weight 1,500 kg - Vertical movement of the grinding wheel headstock The vertical movement is performed on SCHNEEBERGER linear needle slides and is controlled by a precision ball screw and a stepper motor. Vertical axis resolution: 0.001 mm. Dimension read on the display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. - Transverse movement The sub-table carriage slides on SCHNEEBERGER linear needle slides. The transverse movement is controlled by a precision ball screw and a stepper motor. Dimension read on the display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. - Longitudinal Table Movement A hydraulic cylinder and hydraulic unit located outside the machine control the table movement. VICKERS hydraulic pump SESINO air/oil heat exchanger for maintaining a constant hydraulic oil temperature Continuously adjustable table speed from 1 to 30 m/min. - Lubrication Centralized lubrication of all moving parts. - Paint Two-color paint: Safety white RAL 9003 + sky blue RAL 5015 ACCESSORIES - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various phases of the cycle: roughing, finishing, polishing - Visualization to the thousandth of a millimeter of vertical and transverse axis movements - Electronic handwheel for manual axis movement - Coolant system with LOSMA type DTE paper filter external to the machine. - Air/oil heat exchanger for hydraulic oil temperature - SPD electropermanent magnetic plate with 5+5mm fine poles, dimensions 400x200mm - Automatic dressing device mounted above the head. Hydraulic movement – ​​micrometer increments (0.001mm resolution) via stepper motor - Programmable automatic dressing operations within the cycle, with automatic grinding wheel wear compensation - Hydraulic unit located outside the machine - Grinding wheel flange with balancing shaft and grinding wheel - Standard machine guards

Condition: refurbished (used), Year of construction: 2009, TECHNICAL SPECIFICATIONS, MODEL T 60.35 CN Rawable length mm: 600 Rawable width with grinding wheel width mm: 390 Rawable height with new grinding wheel (on magnetic chuck) mm: 400 Magnetic chuck surface mm: 600x300 Longitudinal travel mm: 750 Transverse travel of the carriage under the table mm: 350 Adjustable table speed m/min: 1-30 Gripping wheel dimensions mm: 400x40x127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power: 7.5 kW Hydraulic pump motor power: 2.2 kW Net machine weight: 3,000 kg - Vertical movement of the grinding wheel headstock The vertical movement is performed on linear needle slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Vertical axis resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Dimension readout on the display. Display resolution: 0.001 mm. Electronic handwheel for manual movement. - Transverse movement The transverse movement is performed on hydrostatic slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Dimension readout on the display. Display resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Electronic handwheel for manual movement. Nsdpfxsx N I Aro Af Sjwr - Longitudinal table movement Two hydraulic cylinders and a hydraulic unit located outside the machine control the table movement. Rotation speed is continuously adjustable from 1 to 30 m/min. - Lubrication Located outside the machine, this system controls the table movement and the lubrication of all moving parts. ACCESSORIES - LODI CNC type T 2020W with 12.1" graphic display (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, and polishing - Visualization to the thousandth of a millimeter of vertical and transverse axis movements - Electronic handwheel for manual axis movement - Coolant system with paper filter and high-pressure pump - Mist extractor (capacity 2,400 m³/h) - Electro-permanent magnetic plate, dimensions 600 x 300 mm - Hydraulic dressing device above the head with CNC-programmable automatic dressing operation and automatic grinding wheel wear compensation. - YASKAWA frequency converter for continuous adjustment of grinding wheel speed and for accelerating braking at rest. - Grinding wheel flange with balancing shaft - Complete work area enclosure - Work light

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, TECHNICAL SPECIFICATIONS, MODEL RTR 600 CN Table diameter mm: 600 Electromagnetic chuck diameter mm: 600 Cross travel mm: 350 Max. grinding height with new grinding wheel mm: 400 Table speed, continuously adjustable rpm: 1-200 Gripping wheel dimensions mm: 400 x 50 x 127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power kW: 15 Max. load on table kg: 1,000 Net weight approx. kg: 5,200 Vertical movement is achieved on linear slides and is driven by a precision ball screw and a YASKAWA AC motor. Nwsdpfjx N I Alox Af Sjr Vertical axis resolution: 0.001 mm. Measuring system = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Transverse movement is performed on linear slides and is controlled by a precision ball screw and a YASKAWA AC motor. Transverse movement is performed by the grinding wheel head mounted on the cross slide. Transverse axis resolution = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Rotary table with hydrostatic circular slides. Infinitely variable rotation speed, with YASKAWA AC drive motor. Balanced hardened steel spindle with 15 kW motor. Fixed speed. Option: YASKAWA frequency converter for continuously variable spindle speed (1,100–1,900 rpm) Lubrication unit with automatic lubrication cycle, external to the machine, without initial filling. Standard accessories: - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, flash grinding - Digital measurement of the vertical and transverse axes. Resolution = 0.001 mm - Electronic handwheel for manual axis movement - Continuously variable table speed via YASKAWA AC motor. Rotary table with hydrostatic slides - Grinding wheel headstock with 15 kW motor. Fixed spindle speed: 1,450 rpm. - Central lubrication for all moving parts - Hydraulic unit located outside the machine - Complete watering system with piping, electric pump, guards, electrical equipment, and a 250-liter settling tank (without filter) - Complete enclosure of the work area with sliding door (open ceiling) - 1 complete flange with grinding wheel - Work light - 1 set of service wrenches - CE Declaration of Conformity + CE plate - Operating voltage 400 V +/- 5%, 50 Hz - Electro-permanent magnetic plate with electronic device for adjusting the attraction force. WAGNER brand, type EP 360 - Ø 600mm - YASKAWA frequency converter for continuous adjustment of the grinding wheel speed (1,100-1,900 rpm) and for braking at the end of the cycle - LOSMA paper filter, type DTE 100 (capacity 300 liters) - LOSMA wet fume extractor, type AS1 (capacity 1,300 m³/h) - "MARPOSS" dynamic grinding wheel balancing device for dynamic and automatic balancing of the rotating grinding wheel - Linear diamond holder mounted on the grinding wheel headstock. Automatic dressing cycle with automatic grinding wheel wear compensation. Diamond increment by AC motor. Resolution 0.001 mm - 1 Diamond - Complete auxiliary pump for washing parts and the magnetic platen

Condition: used, functionality: fully functional, Year of construction: 1996, Filtration Unit/Dust Extraction Manufacturer: Lühr Type: MWF 2.5/6.5/2.0 Year of manufacture: 1996 Accessories: Exhauster Type: 112/400-4-R Njdpfx Ajx N I Afof Sowr Year of manufacture: 1996 2 x screw conveyors Ductwork systems

Condition: used, Year of construction: 2017, working width: 12,000 mm, Empty weight: 13.000 kg Auction item. Harrows in working condition. The discs were replaced last year. Has shaved about 10 000 hectares. Sold as seen in the photos. Nodjx N Iz Uspfx Af Sswr

Condition: reconditioned (used), functionality: unexamined, Year of construction: 2008, machine/vehicle number: A 0250 A 2027, laser source manufacturer: Trumpf, laser source model: TruFlow 5000, laser power: 5,000 W, Used Trumpf laser cutting system, which was only refurbished in 2025. The system was previously operated by the facade manufacturer Roschmann in Gersthofen and is available immediately. Further information will be uploaded progressively. Viewing by appointment. Nwodex N Iz Ijpfx Af Ssr

Condition: good (used), functionality: fully functional, overall weight: 27 kg, pressure: 180 bar, compressed air connection: 8 bar, FREUND HLS 12 Horn and leg shear Nwsdpfxsx N Izzo Af Sjr Pneumatic: 3-8 bar. Hydraulic: 180 bar. *Without hydraulic pump*

Condition: used, mileage: 291,351 km, power: 240 kW (326.31 HP), fuel type: diesel, axle configuration: 6x4, fuel: diesel, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Empty weight: 12.690 kg Njdpjx N Iy Rofx Af Sewr Carrying capacity: 13.310 kg GVW: 26.000 kg Auction item. The truck is in working condition. Manipulator HIAB XS 166 BS-2 DUO, 2008, lifting capacity 5,800kg, loading lifting height 10,2 m, boom reach 8,3 m. The Euro standard is not indicated in the documents, there is no Euro standard certificate. Sold as seen in the photos and video.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, The machine is in excellent condition and can be inspected at our warehouse. Nwedpfx Afjx N Iy Ds Ssr

Year of construction: 1990, operating hours: 4,569 h, condition: used, Auction item. Locomotive in working condition. On 2017 was made full overhaul. Moto hours counted after that. Sold as seen in pictures. Nodpfxsx N Iywe Af Sswr Year of manufacture unknown Auction item. Šilumvežis darbinės būklės. 2017 metais buvo atliktas pilnas kapitalinis remontas. Moto valandos rodo dirbtą laiką po remonto. Parduodama kaip matoma nuotraukose. Gamybos metai nežinomi.

Condition: used, Year of construction: 2007, operating hours: 3,600 h, power: 36 kW (48.95 HP), lifting height: 11,200 mm, Empty weight: 6.891 kg Mast: articulated arm Auction item. Boomlift is in working condition. Nsdpfxjx N Iyqe Af Sjwr Just replaced new battery and generator.

Condition: excellent (used), Year of construction: 2005, The machine is in excellent condition and can be inspected at our warehouse. Nedpjx N Iykofx Af Sjwr

Condition: used, mileage: 217,482 km, axle configuration: 4x4, Year of construction: 2006, Equipment: all wheel drive, Empty weight: 16.000 kg Nwsdpfx Afex N Iyde Sor Carrying capacity: 7.800 kg GVW: 23.800 kg Auction item. The truck with drilling equipment is in working condition. Truck MAN 17.222. The maximum drilling diameter is 315 mm. Separate engine for drilling equipment. New suspension, tires. All books and specifications are available.

Condition: excellent (used), Year of construction: 2005, The machine is in excellent condition and can be inspected at our warehouse. Nwsdex N Ix Tepfx Af Sjr

Condition: used, loading space length: 7,700 mm, loading space width: 2,480 mm, GERMAN DEALER offers: Krone 7.82 m BDF platform 7700 mm x 2480 mm Crane-compatible Lashing rings Several units available Many swap bodies and chassis in stock! Nodpox N Ix Hefx Af Sjwr ##### PLEASE CALL - NO EMAILS! DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! VIEWING ONLY BY APPOINTMENT! #####

Condition: used, overall weight: 16,000 kg, loading space length: 7,300 mm, loading space width: 2,480 mm, GERMAN DEALER offers: Krone BDF Swap Body 7.45m Platform 7300 mm x 2480 mm Year of manufacture 2013 Craneable Lashing rings Nwsdpfxox N Ixye Af Ser 16,000 kg GVW partial rust technically ready for immediate use several units in stock Many swap bodies and chassis available from stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: used, functionality: fully functional, overall weight: 16,000 kg, loading space length: 7,300 mm, loading space width: 2,480 mm, GERMAN DEALER offers: BDF platform swap body 7.45m, GALVANIZED, external lashing rings, additional central lashing rings, 28 lashing rings in total, lashing rail, craneable, loading area: 7300 mm x 2480 mm, 16,000 kg gross weight, several units available. Numerous swap bodies and drawbar trailers in stock! ##### PLEASE CALL – NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO Nutzfahrzeuge has been supplying since 1983! Viewing by appointment only! ##### Njdpfx Aox N Ixtsf Sewr

Condition: good (used), functionality: fully functional, empty load weight: 3,760 kg, maximum load weight: 14,240 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2011, next inspection (TÜV): 05/2026, loading space length: 7,820 mm, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: BDF swap body trailer 7.82 m Multi-changer, height-adjustable Lower ride height 1000 mm Galvanized Twin tyres 235/75R17.5 SAF axles Drum brakes Support legs front and rear Completely new underrun protection and lighting Immediately ready for operation Available from our own fleet Nwedpfx Afex N Ixmo Ser Many drawbars and swap bodies in stock! ##### PLEASE CALL – NO EMAILS! DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO-Nutzfahrzeuge has been delivering since 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: good (used), WEINIG HYDROMAT H-23 10 SPINDLE MACHINE WITH TILT BEAM SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 7,5 KW 3: LEFT 7,5 KW 4: RIGHT 7.5 KW 30° TILTABLE 5: LEFT 7,5KW 6: TOP 11 KW 7: BOTTOM 7,5 KW 8: TOP 7,5 KW 9: BOTTOM 7,5 KW Nwedpfx Aex N Ixgef Ser 10: UNIVERSAL 7,5 KW 360° TILTABLE 60 M/MIN+ ELECTRIC. FEED 14 x DRIVEN TOP FEED ROLLERS 7 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 7+9 DIMENSION: APPR 5400 X 2000 X 1800 MM WEIGHT: APPR. 7500 KGS DUSTHOODS: 10 x 140 MM DIAMETER

Condition: reconditioned (used), Electrolux Variomix 300L tilting boiling kettle with agitator. The unit has undergone a complete overhaul. Power: 52kW, 400V. Nsdpfxex N Iw No Af Sewr

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 5,898 h, load capacity: 4,000 kg, lifting height: 6,900 mm, free lift: 2,350 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,200 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,700 kg, empty load weight: 6,700 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 | 2006 | 5,898 MTH | LPG | Triplex 6,900 mm | Fork Positioner | New Tyres | Condition 5/5 ✅ Optional: 4,050 mm spreader beam. Ready for work. No compromises. 🚀 This COMBILIFT C4000 has been fully serviced both technically and cosmetically, presenting itself as like new ✨. Built for demanding environments, it delivers reliable, downtime-free operation. 💪 Key specifications: 📌 Load capacity: 4,000 kg 📌 Mast: Triplex 6,900 mm | Free lift: 2,350 mm 📌 Fork positioner: 1,360 mm | Forks: 1,200 mm Nwodpfx Asx N Ivrjf Sor 📌 Tyres: superelastic 100% 🛞 (Front 200/50-10 | Rear 27x10-12) 📌 Heated full cabin 🔥 📌 Weight: 6,700 kg | Load centre: 600 mm 📌 Dimensions: H 2,400 mm | L 2,400 mm | W 2,250 mm | Mast height: 3,200 mm ✅ Fully serviced and inspected | ✅ Ready for immediate operation Ideal for: 🏭 Narrow aisles | 📦 Long loads | 🪵 Timber/Steel/Tubes | 🌦 Indoor & outdoor FT LOGISTICS 🛠 Full technical inspection & refurbishment 🚚 Transport across Europe 💶 Leasing support | 📄 Invoice in EUR/PLN 🔧 After-sales service & warranty

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 5,898 h, load capacity: 4,000 kg, lifting height: 6,900 mm, free lift: 2,350 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,200 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,700 kg, empty load weight: 6,700 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 | 2006 | 5,898 MTH | LPG | Triplex 6,900 mm | Fork Positioner | New Tyres | Condition 5/5 ✅ Optional: 4,050 mm spreader beam. Ready for work. No compromises. 🚀 Nsdpfxex N Ivls Af Sowr This COMBILIFT C4000 has been fully serviced both technically and cosmetically, presenting itself as like new ✨. Built for demanding environments, it delivers reliable, downtime-free operation. 💪 Key specifications: 📌 Load capacity: 4,000 kg 📌 Mast: Triplex 6,900 mm | Free lift: 2,350 mm 📌 Fork positioner: 1,360 mm | Forks: 1,200 mm 📌 Tyres: superelastic 100% 🛞 (Front 200/50-10 | Rear 27x10-12) 📌 Heated full cabin 🔥 📌 Weight: 6,700 kg | Load centre: 600 mm 📌 Dimensions: H 2,400 mm | L 2,400 mm | W 2,250 mm | Mast height: 3,200 mm ✅ Fully serviced and inspected | ✅ Ready for immediate operation Ideal for: 🏭 Narrow aisles | 📦 Long loads | 🪵 Timber/Steel/Tubes | 🌦 Indoor & outdoor FT LOGISTICS 🛠 Full technical inspection & refurbishment 🚚 Transport across Europe 💶 Leasing support | 📄 Invoice in EUR/PLN 🔧 After-sales service & warranty

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 5,898 h, load capacity: 4,000 kg, lifting height: 6,900 mm, free lift: 2,350 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,200 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,700 kg, empty load weight: 6,700 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 | 2006 | 5,898 MTH | LPG | Triplex 6,900 mm | Fork Positioner | New Tyres | Condition 5/5 ✅ Optional: 4,050 mm spreader beam. Ready for work. No compromises. 🚀 This COMBILIFT C4000 has been fully serviced both technically and cosmetically, presenting itself as like new ✨. Built for demanding environments, it delivers reliable, downtime-free operation. 💪 Key specifications: 📌 Load capacity: 4,000 kg 📌 Mast: Triplex 6,900 mm | Free lift: 2,350 mm 📌 Fork positioner: 1,360 mm | Forks: 1,200 mm 📌 Tyres: superelastic 100% 🛞 (Front 200/50-10 | Rear 27x10-12) 📌 Heated full cabin 🔥 📌 Weight: 6,700 kg | Load centre: 600 mm 📌 Dimensions: H 2,400 mm | L 2,400 mm | W 2,250 mm | Mast height: 3,200 mm Nodpex N Ivfofx Af Sewr ✅ Fully serviced and inspected | ✅ Ready for immediate operation Ideal for: 🏭 Narrow aisles | 📦 Long loads | 🪵 Timber/Steel/Tubes | 🌦 Indoor & outdoor FT LOGISTICS 🛠 Full technical inspection & refurbishment 🚚 Transport across Europe 💶 Leasing support | 📄 Invoice in EUR/PLN 🔧 After-sales service & warranty